electrical maintenance
Post on 27-Dec-2015
401 Views
Preview:
TRANSCRIPT
STANVAC CHEMICALS (I) LTD
Marketed Under Licence In India By:
ce : 15-16, Old Sewa Nagar Market, P. O. Lodhi Road, New Delhi-110003, Indiael. : +91-11-24647199 / 24647252, Fax : +91-11-24633847 / 24623826,
Web Site: www.stanvac.com, E-mail : sales@stanvac.com
India’s Widest Range Of World Class Maintenance Consumablesrosols, Environment Friendly Cleaners, High Build Solvent Free Anti-Corrosion EpoxyLinings, Repair & Reclamation Epoxies, Anaerobics, Silicones, PUF...., Engineered
Self-Fusing Electrical Tapes, Fire Suppression Coatings, EN Approved PPE Safety....
USE THE BEST
ELECTRICAL MAINTENANCE
WORLD CLASS
CLEANING - INSULATION - PROTECTION
I. DI-ELECTRIC SOLVENT CLEANERSI. DI-ELECTRIC SOLVENT CLEANERS
SCREEN/ DISPLAY CLEANER(P) Weicon TFT/LCD Display
Cleaner
FLASHOVER CARBON CLEANER
(P) 8480 Carbon Cleaner
BATTERY TERMINAL
(P) #Z911 Corroclean
HEAVIER THAN WATER(Proprietary)
(P) #8070 Electrical 88 Co2(Long term protection)
(S) SP98E4 De-Moist.
HIGH FLASH POINT
(P) 8140 HFP CLEANER/ DEGREASER(140
OF Flash point)
GENERAL USE
(E) # 3070 Super 5(Alternate to CRC 2.26)
FLAMMABLE
(E) 1020 Super Spra-Nit
(Heavy duty/ “Kli-Nit” type)
GENERAL USE
(P) #415 Off Line Contact Cleaner (HD) Co2(Mild moisture displacing ability)
(S) #7075 Off Line E&E cleaner Co2 (F)(High Discharge)
(E) 1010 Super E-Kleen Co2(Light duty)
PARTIALLY PLASTIC SAFE
HEAVY DUTY
(P) #8060 Safety solvent Co2(High KB Value)
(S) #7030 Online powerjet Co2(High Discharge)
(S) Safety solv Co2(360
O)
PARTAL PLASTIC SAFETY
(P) 7066 Contact Cleaner Co2 (OKS 2621)(High discharge)
(S) SP98E3 Safe Klens (ELC) Co2
(S) SP98E5 Contact Cleaner (NF) Co2(360
o)
100% PLASTIC SAFE
(P) #Z902 Electrosafe Co2(Proprietary)
Weicon Compressed Air
HEAVY DUTY
(S) #7340 All 4 Co2(360
O)
AEROSOLS- ELECTRICAL CLEANERS(Note: All products are Di-Electric i.e. 100% non conductive
except foam based)
NON FLAMMABLE
DRY COMPRESSED AIR
FOAM BASED
PLASTIC SAFE
RESIDUAL PROTECTIVERESIDUELESS
LIGHTER THAN WATER
New
(P) #Z902 Electrosafe Co2(Proprietary)
AEROSOLS- ELECTRONIC MAINTENANCE
RESIDUELESS CLEANERS
FLAMMABLE100% Plastic safe low odor,dielectric precision solvent.
(P) 8376 Electronic Component Cleaner Co2 (F)(Ultra Safe)
(S) SP98E2 Safe Klens ELT Co2 (F)(Economic)
NON FLAMMABLE
Plastic safe, low odor.
PROTECTION- CLEARACRYLIC COATING
(P) #6004 Kleer Kote
(S) SP98E8 Plastikote
(E) Superon Plastikote
NOTE:
(P):- Premium Series
(S):- Superior Series
(E):- Economy Series
OTHER TECHNOLOGIES - FIRE STOP PRODUCTSOTHER TECHNOLOGIES - FIRE STOP PRODUCTS
FLAMMADUR MW FIRESTOP SYSTEMFLAMMADUR MW FIRESTOP SYSTEM
Flammadur A150 – Properties
Applications
• Mineral Wool density: 150 kg/m3 = 0.15 g/cm3 = 9.2 pcfMelting point; = 1000° C (1832° F)Board Dimensions: 1.2m x 60cm x 6cm (47.2” x 23.6” x 2.36”),for an opening area of 0.72m2 (7.75ft2), with 4boards/box.Max. opening, wall W x H = 1.2mx1m (47.2 inch x 39.3 inch)Max. opening, floor W x L = 1 m (3.9 inch) x unlimitedFire Rating of F = 2 hrs, T = 0, 1, 2 hour expected in testing byUL (Fire tested in Germany according to DIN standards, etc. Tobe tested for UL approval)
• In concrete walls and floors and in drywall and masonry wallswith the following penetrants:Cables (individual or grouped) power, control, data,communication, fiber opticCable trays, or racks (aluminum, steel, plastic)PipesDucts
••
•••
•
•••
• Fire and smoke resistant• Water based materials• Easy to install, remove and to re-install• Fair acoustical properties• No ampacity derating in cables• Free of asbestos, halogens, lead solvents, noxious vapors
Advantages
Flammadur A150
Flammadur A77
FlammadurE-473
�
�
Fast drying, residueless, as well as penetrative di-electric cleaners - "Combination
Cleaning System".
Non flammable heavy duty.
Non flammable plastic safe.
Ultra precision fully plastic safe.
Plastic safe cleaning cum moisture displacement
High pressure compressed air.
Non chlorinated bulk packed.
�
�
�
�
�
�
�
�
�
�
Regular usage prevents arcing, sparking, electrical leakages, short circuits & fires.
Ultra high solvent purity & superior atomisation for unmatched cleaning performance.
User friendly & environmentally safe. “ ” - Co formulations.
Cost effective - full content spray out warrantied.
Full Range :
HighActive % 2
0 Fo
31 8.1 21 KV3. # 8376ELECTRONICCOMPONENTCLEANER CO2
Fast drying, ultra precision,fully plastic safe,residueless, non chlorinated,electronic componentcleaner.
PCB's, precision electronicequipment, sensitiveelectrical &telecommunicationequipment...
CASE PACKING12 X 500ml / 10.9 oz Aerosol sprays
S.No. Product Description
Specifications
Applications
1. # 8060SAFETYSOLVENT CO2
Heavy duty, ultra high strength,fast drying, non-flammable, "on -line" residueless, di-electriccleaner.
Insulators, busbars,commutators, heavyduty electrical systems,electric motors, alternators,generators, cables…..
Effectively cleans grease,oil.... prevents flash overs
None 133 2.6 36 KV
CASE PACKING12 X 700ml / 20.0 oz Aerosol sprays
2. # Z902ELECTROSAFECO2
Fast drying, non -flammable, plastic & varnishsafe, residueless, non-chlorinated, di-electric, contactcleaner.
"on -line", None 56 9.1 31 KV Contactors, switches,circuit breakers, electricalpanels, inner electric motorcleaning…..
CASE PACKING12 X 500ml / 17.5 oz Aerosol sprays
"IMP: DO NOT USE ON SENSITIVE PLASTICS."
Low toxicity
Non-flammable
Fast evaporation
Leaves no residue
Ultra High KB Value
No Class I or II O.D.C.'s
User/workplace friendly
Consistent cleaning power
RMCRochester Midland Corporation
Performance Resins & Composite Systems
USA USA USA BELGIUM GERMANY AUSTRALIA
FlashPoint
KBValue
EvaporationRate
Di-ElectricStrength
S.No. Product Description
Specifications
ApplicationsFlashPoint
KBValue
EvaporationRate
Di-ElectricStrength
6. # 6030PEN OIL
Heavy duty rust penetratorfor quick re-opening ofheavily rusted/ seizedassemblies & fasteners.
Seized/Jammed threadedfasteners & fittings.........
>160 F0
NA NA 35 KV
CASE PACKING12 X 500ml / 11.2 oz Aerosol sprays
# 415OFF-LINECONTACTCLEANER H. D.CO2
4.Fast drying, fully plastic &varnish safe, residueless, nonchlorinated, economicallypriced electrical & electronicequipment cleaner.
Quick penetrating action,effectively removes grease,oil, dirt & other contaminants.
Unique “moisture & water”displacing action, yetresidueless.
0°F 31 8.1 Notapplicable.(use “off-line” onde-energisedsystems.)
Electrical components,connectors, contacts,magnetic tape heads, semi-conductor assemblies,computer components,precision instruments, PCB'Srelays & controls…….
Uniquely useful forequipments in moisture proneenvironments as both cleans& displaces moisture withouta residual film.CASE PACKING
12 X 700ml / 15.0 oz Aerosol sprays
5. # 7340ALL- 4 CO2
MOISTUREDISPLACINGDI-ELECTRICCLEANER
Universal electrical cleaner.
Displaces moisture &restores resistance values,instantly of insulatingmaterials & preventsdeterioration of electricalproperties.
Provides protection againstelectrical leakage, arcing &short circuits.
Penetrative cleaner-loosensdirt, scale, rust..... improveselectrical conductivity.
Excellent electricalproperties & non-flammableCO propellant enables "IN-
SITU" maintenance ofelectrical equipment, withoutthe need for longshutdowns, dismantling,baking, drying...
2
Cleaning:
Moisture displacement:
Restoration of electricalproperties & "IR" Values.
Re-opening rusted & seizedparts.
Di-electric Lubrication:
Dielectric rust & corrosionprevention:
contactors,generator/motor windings,circuit breakers, insulatorbushings, electrical &electronic assemblies, batteryterminals.....
Busbars, bus bar supports, coils,"make-break" contactors,insulator bushings, terminalstuds.....
Circuit breaker levers, gangoperated devices,Isolators......
Earthing bolts,electrical spares......
>155 F0
30 NA 33 KV
CASE PACKING12 X 700ml / 14.0 oz Aerosol sprays
7. WEICON TFT/LCDSCREEN-CLEANER
�
�
�
�
On Foam basis.
Anti-static. Provides a dust& dirt reducing surface.
Anti reflective.
Safe on sensitive Plastic& Glass.
Cleans, dirt, dust, grease,nicotine.... Without leavingresidues - LCD'S, Plasticscasings
CASE PACKING12 X 500ml / 17.5 oz Aerosol sprays
Protects
Penetrates
Lubricates
Cleans
Displaces moisture
Prevents rust
Silicone free
Especially effectivein high humidity
360 spray action0
8.# Z136SUPERELECTROSAFE
Odorless, non-chlorinated,di-electric, residueless,electrical safe solvent.
Safe for all metals,plastics, varnishes,rubbers…
Slow drying (30-45 minutes) forenhancedpenetration &superior cleaningpower.
Cleaning electrical &electronic systems, in diptank, wipe-off or by coarsespray. (For more rapid dryingtime, apply forced air with a"blow-off" nozzle).
144°F 27 38KV
CASE PACKING4 X 5 Ltr. Poly jars
�
�
�
�
�
�
�
�
"In - situ" restoration of electrical “IR” values - motor windings, insulators……… even in “New” motors
Tight, conformal electrical insulation & weather proofing of exposed wires & electrical windings as
well as, surfaces otherwise difficult to tape/ insulate & protect.
Varnish uniquely penetrates thoroughly & forms a tough, flexible film with high adhesion, arc
resistance & non-tracking properties.
Anti-track coatings with superior gloss, weathering & tracking resistance.
Ultra long lasting protection & prevention of electrical insulation failures.
Class 'F' & 'H' epoxy type varnishes uniquely allow for motor heat expansion & contraction & thus
also have excellent utility as secondary "finishing varnishes" especially for failure/breakdown prone
motors installed in extreme conditions, working under heavy loading & frequent "start-stop"
Easy “spray-on” “brush-on” or “dip” electrical insulation.
Tough, synthetic rubber insulation & weather proofing coatings in multiple colors.
S.No. Product Description
Specifications
ApplicationsFlashPoint
KBValue
EvaporationRate
Di-ElectricStrength
Dries within 5- 10minutes, allowingtime for solventcleaning action.
9. # Z137QUICK SOLV
Quick drying, highdielectric strength, non-chlorinated solvent.
Safe for all metals/plastics, varnishes,rubbers….
Cleaning electric motors,electric cables, otherelectrical & electronicequipments……..
Usable as a coarsespray, wipe on/ wipe offsolvent or in a dip tank.
104°F 27 38KV
CASE PACKING4 X 5 Ltr. Poly jars
II. DI-ELECTRIC INSULATION COATINGSII. DI-ELECTRIC INSULATION COATINGSAEROSOL- ELECTRICAL INSULATION & PROTECTION
MOTORS &FRAYED
INSULATION
INSULATORS &BUS BARS
BUS BARS & CABLESHEATHING/ JOINTS
(P) 931 A STRIPPEX(Rubber Insulation )
(Proprietary)
- High grip- Multiple colors- Long lasting protection- 2 KV BDV 4 Layers- Strippable/ Non strippable
(Primer)
(S) SP98E15 Plasti-Dip
BATTERIES
IN-SITU SULFATIONPROTECTION
(P) 6006 B.T.C. (Waxy film)(Proprietary)
- Heavy duty- Long lasting protection
(S) SP98E12 Battery Protect (IMP)
JUNCTIONBOXES
(P) Z201 PUFSEAL(Sealing)
(P) Z927 RUBBEX(Overcoating)
(Also 712 CRS High glossepoxy)
(P) 8078 DGCS(Proprietary)
(11KV Plus Bi-metalliccorro protection)
(S) SP98E14Conductive Sealant
(P) 6084 RED INSULATINGVARNISH
(IR Value increase)(Proprietary)
- Non drip, Fast Grip- High build- Flexible- 2KV BDV 4 Layers
(P) 906 PROVAR ANTITRACK(Surface resistivity enhancement )
(Proprietary)
- High gloss- Smooth- Class H- 2KV BDV 4 Layers- 121 KV Surface resistivity.
(S) SP98E11 Insulating Varnish
NOTE:
(P):- Premium Series
(S):- Superior Series
(E):- Economy Series
HT JOINTS
CLEANING
(P) 911CORROCLEAN(Non drip Foam)
(Proprietary)
- Foaming- Alkaline- Acid Indicator dye
(S) SP98E13 BatteryKlens
2100 V/Mil11. # 6084RED INSULATINGVARNISH
Class F, flexible, tough, highdielectric strength arc &tracking resistant finishingelectrical varnish.
Penetrates, coats, insulates &seals in one step. Restores“IR” values, “in-situ” allowingmotor operation till a suitableshutdown.
Resists oil, water, acids &alkalis.
Enhances electrical equipmentlife spans, prevents failuresbreakdowns,& “IR” valuedroppages.
Electric motors, coils, LTbus-bars, frayedinsulation, LT & HTinsulators…. anything thatcan be spray coated canbe insulated &protected.
For the BestEnhancing of "IR" values,Removal of alreadyPenetrated moisture (VVAHeat Lamps / #8070Electrical 88) is firstnecessary
Imp. Note:
F
Dielectric Strength:a) in air at RT : 98Kv/mmb) after
immersionin waterfor 24 hrs : 58Kv/mm
c) at 155°C : 23Kv/mm
Air Dries : 15 min.Useable : 60 min.Full cure : 24 hrs.
CASE PACKING12 X 700ml / 15.0 oz Aerosol sprays
10. # 6004KLEER KOTE
Fast drying, transparent acrylicplastic protective coating.
Resistant to heat, cold, salts,alkalies & acids.
Will not crack, peel or discolor.
Solder through.
Electronic PCB'S, dials,guages……..
-10°F to+350°F(TempRange)
1346 V/Mil Air dries: 10- 20 min
Useable: 60 min
S.No.
Product Description
Specifications
ThermalClass
Di-electricStrength
Useable /Cure time
Applications
12. # Z906PROVARANTI-TRACK (SP)
(Available in threecolors- Red,Black & Clearboth in Aerosolspray's & inBulk )
Class H high gloss, highdielectric strength, flexibletough epoxy anti- track coatingwith excellent resistance toabrasion, wear, oil, water acids& alkalis.
Restores “IR” values &prevents breakdowns
H 2270 V/Mil
a) Dielectric Strength
at 28 C : 121Kv/mm
b) Dielectric Strength
at 180 C : 81 Kv/mm
(still retains
a smooth,glossy finish)
c) Breakdown
Voltage : 5.7Kv
(0.05 mm coating
thickness)
O
O(NB)
(NB)
Air dries : 15 minUsable : 60 minFull cure : 24 hours
CASE PACKING12 X 500ml / 12.5 oz Aerosol sprays
CASE PACKING12 X 500ml / 13.0 oz Aerosol sprays
Ceramic & epoxyinsulators, bus-bars,bakelite sheets, junctionbox interiors, cableterminations.......
6085 Also available #Green Insulating Varnish for superior chemical resistance.
S.No.
Product Description
Specifications
ThermalClass
Di-electricStrength
Useable /Cure time
Applications
14. # Z906 (B)PROVARANTI-TRACK(BULK- RED,CLEAR & BLACK)
Class H, air drying, "finishing"brushable varnish, speciallydesigned for the protection ofexposed wires & electricalwindings.
Penetrates coats & seals inone step.
Resists abrasion & wear. Willnot chip, peel crack/ becomebrittle.
Electric motors,coils, LT bus-bars, frayedinsulation, LT & HTinsulators…. anything thatcan be coated, can beinsulated & protected.
Uniquely - single part &air drying.
H 2270V/Mil Air Dries : 15 min.Useable : 60 min.Full cure : 24 hrs.
15.
13.
16.
# Z1311INSULCOAT(HIGH BUILDEPOXYINSULATIONCOATING)
# 715CERAMICKOTE (RED)(BRUSHABLECERAMICINSULATORCOATING).
# Z931STRIPPEX(E)(HIGH GLOSSEPOXYINSULATIONCOATING)
Solventless, high build twocomponent epoxy protectiveinsulation coating. Excellentresistance to outdoorweathering. Tough, flexiblecoating with superb adhesionto properly prepared metalsurfaces.
High gloss abrasion resistant,two-part, anti-trackinginsulation coating.
Ultra high gloss self-levellingdi-electric, two part epoxycoating with excellentInsulation, anti-tracking, anti-abrasion, temperature &chemical resistance.
Especially designed as anoverlay on ceramicinsulators, for “In-situ”reconditioning & anti-tracking…….
Insulating & protectingnaked conductors &weather exposedinsulators....
- 20°F To+210°F
-10°C to+125°C
Continousupto 400°F
22KV break down voltageas per IS:2584-1963
Di-Electric Constant: 3.0
>23KV break down voltage/0.85mm coating thickness(no puncture observedupto 19KV)
Pot Life : 20 minSet Time : 4-6 hrsFull Cure : 120 hrs
Pot Life: 10- 15 minSet time : 90 min.Full Cure : 24 hrs.
Pot life : 20minSet Time : 6HrsFull Cure : 100Hrs
17. # Z730STEELWELD(DI-ELECTRICEPOXY COATINGCUM PUTTY)
Permanent water proofinginsulating overlay onunderground joints &connections… power,telecom…. Simply mix up& overlay for a lifetime ofprotection.
Repairing / joining brokeninsulators, keyways....
Volume resistivity
-10°C to300°C
500V/Mil
3.16 X 10 OHM/CM15
Pot life : 25 min.Set time : 4 6 hrs.Full Cure: 12-15 hrs.Shelf life : 20 years
400V/Mil
CASE PACKING4 x 1 kg Sets
CASE PACKING
4 x 1 Gal.
CASE PACKING4 x 1.5 kg Sets
CASE PACKING4 x 1 kg Sets
CASE PACKING4 x 284 Gms. Tube sets
SQUEEZE - OUT MIX APPLY
Non shrinking, 1:1 mixing,convenient tube packed nonconductive high mechanicalstrength epoxy coating cumputty.
Provides indefinite insulation &overlay protection with ultrahigh strength & ease of use
Naked high voltageconductors on which aninsulation coating isdesired to prevent outages& flashovers especially inhigh voltage powerdistribution systems.
Also an excellentalternative toDi-electric floor matting inSub-stations/HT Panels.
# Z730 STEELWELD (DI-ELECTRIC EPOXY COATING CUM PUTTY)
S.No.
Product Description
Specifications
ThermalClass
Di-electricStrength
Useable /Cure time
Applications
�
�
�
�
�
�
Self-amalgamating-maintains tight insulation build up for void free
electrical stability & permanent resistance to dust & moisture
penetration.
Multiple layers fuse together to form single layer as will not "unravel" or
"loosen" with time-long lasting reliable electrical & telecommu-
nications insulation & protection.
Especially suited for hot, high amperage, outdoor & underground
applications....
Outstanding corona & ozone resistance.
UV resistant. Excellent for outdoor applications.
Excellent moisture, corrosion & chemical resistance.
III. DI-ELECTRIC SELF FUSING INSULATING,CABLE SHEATHING REPAIR & SPECIAL PURPOSE TAPES
III. DI-ELECTRIC SELF FUSING INSULATING,CABLE SHEATHING REPAIR & SPECIAL PURPOSE TAPES
1700V/Mil18. # 931STRIPPEX(SYNTHETICRUBBERCOATING SERIES)
a) 931(A): Aerosol
b) 931(B):Bulk Brushable
c) 931(P): Primer
Color coding cumprotection.
Power & telecom cablesheath repair &protection, junction boxsealing, bus bar sealing &insulation, cableterminations & electricaljoints….
Available in multiplecolors R, Y, B, BL & G.
30F°to 250F
a) 931(A):2kv breakdown voltagewhen applied alone in 3 - 4layers. 64Kv/mm dielectricstrength
b) 931(A) (B) & (P)Combination:12Kvbreakdown voltagewhen used correctlyin combination.
Air Dries : 30 min.
Full cure : 24 hrs.(Build-up in 3-4multiple layers)
CASE PACKING12 x 500 ml / 11.0 oz Aerosol Sprays
CASE PACKING4 x 1 GAL
CASE PACKING4 x 1 GAL
Unique air dry, dielectric, non -ageing, single component,synthetic rubber coating fortight, conformal electricalinsulation, weather proofing &color coding.
Excellent weatherability,chemical resistance &mechanical strength.
Easy to apply & remove.
Functions like a "LiquidElectrical tape"
Passes 2000 hours salt spraytesting & provides 10 year plusweatherablity protection.
650% elongation with over3000 psi tensile strength &excellent resistance to acids,alkalies & pollutants.
Won't crack, peel or harden. Evenunder extreme conditions, it remainsflexible.
Insulates, protects and color codes.
Seals out moisture and preventscorrosion.
Acid and Salt Resistant.
Stops terminal screws from vibratingloose.
S.No.
Product Description
Specifications
ApplicationsDi-electricStrength
Temp. Range Tape Size(W x TH x L)
22. GLF JACKETREPAIR WRAP
Abrasion & resistant jacket repairwrap.Excellent abrasion, flame & UVresistance & superior moisture seal.Adheres to all types of cablejackets.
Durable repairs on mine,power & telecom cables aswell as a splice/ joint/conduit wrap especially forunderground applications,wet environments....
550 V/mil Max. cabletemp. 130 C
o
51mm X1.27mm X 2.6m
CASE PACKING12 Rolls
20. # W 963PLYSAFEHIGH VOLTAGETAPE
Ethylenepropylene rubber, selfamalgamating, moisture proof, highvoltage tape suitable for insulation& jacketing from 600 V to 69000V.
Waterproof, permanentsplices on power cables,repairing damaged cablesheaths, protecting highvoltage bus components...
800 V/Mil
600 V/Mil
BreakdownVoltage: 33KV(50mm width)
-40° to +130°C 19, 25, 38& 50 mm
× 0.76 mm× 9.1 M
21. # Z955STRIPPEX (SL)HIGHTEMPERATURETAPE
Silicone rubber, self amalgamating,high temperature resistant tape,especially designed for insulating &jacketing heavily loaded / highamperage connections &components from 600 V to 35000V.
Bus bars, heavily loadedelectrical joints, LT & HTmotor connections,terminals, splices in hot &cold applications…
BreakdownVoltage: 12KV(0.50mmthickness)
-54° to +300°C 25 mm ×0.50mm× 15 mtrs.
CASE PACKING12 Rolls
CASE PACKING12 Rolls
19. "PIB" MEDIUMVOLTAGE TAPE
Polyisobutylene rubber,self amalgamating,moisture proof, mediumvoltage tape suitable forinsulation & jacketingfrom 600 V to 35000 V.
Water proof permanentsplices on power &telecom cables, protectingbus components, heavyduty motor & powerconnections...
900 V/Mil -40° to+90°C 25 mm &50 mm ×0.50 mm× 10mtrs.
CASE PACKING12 Rolls
IV. MOISTURE DISPLACER, CONTACT LUBRICANTS,FLASH-OVER CARBON CLEANER, ELECTRICAL KITS....IV. MOISTURE DISPLACER, CONTACT LUBRICANTS,
FLASH-OVER CARBON CLEANER, ELECTRICAL KITS....
23. # 8070ELECTRICAL88 CO2
Di-electric, penetrative cleaner cumfast action, heavy duty hydrophobicwater & moisture displacer cumprotective coating.
Safe for plastics, varnishes,rubbers…
Use in combination-Flush with#8060/#902 - spray 8070 - Wait 10-15 minutes (Max.) - Reflush with#8060/ #902-moisture will beeffectively removed.
"Unique - heavier than waterformulation".
S.No.
Product Description
Specifications
ApplicationsTemp.Range
Di-electricStrength
ProtectionLife
Prevention of arcing /sparking in HT/LT bus barsdue to moisture.
Electric motors, withweakened “IR values” due towater / moisture ingress,solenoids, control terminals,capacitors, transformers,electrical subassemblies,PCB's…
Pre-monsoon protectivespray coating for preventingmoisture caused leakage /flash overs "throughout theseason".
-50°F To400°F
31 KV a) Indoors : Over 2 yrs.
b) Outdoors : 6 months -1yr.
CASE PACKING12 X 700ml / 18.0 oz Aerosol sprays
Use of a contact lubricant will fill gaps and
eliminate micro arcingOnce separated the contacts continue to be
protected by a thin film of contact lubricant
27. # 8480CARBONCLEANER
Foam gel type heavy duty,"thick-film" penetrative bondeddeposit remover especiallysuitable for thick layers.
Especially useful for DC motorcommutator cleaning, Post flashover carbon cleaning....
User friendly. Does notcontain any harmfulsolvents, acids, andcaustics. All metal &plastics safe.
Especially designed forthicker, heavier layers ofcarbon / varnish /bonded deposits...Gradually penetratesthrough the microscopicpores in the coating,reaches the final surface& completely “lifts off” thecoating / deposit.
SpecificGravity
0.83-0.87
VOCContent
44-45
Vapour Density
>1
25. ELECTROLUBESYNTHETICCONTACTGREASE
# 8078DGCS DRYGRAPHITECONDUCTIVESEALANT
Non-ageing, non-drip weatherproof tenacious long lastingcontact grease.
Reduces friction & enhanceselectrical performance.
In thick film is electricallyinsulative, preventing tracking &in ultra thin film i.e. betweenclosed metal contacts infactimproves current flow (Quantumtunneling effect).
Prevents arcing, tracking,heat generation, highmechanical wear& jamming in:-a) Gang operating devices
(G. O. D's)b) Bus barjoints/connectionsc) Isolatorsd) Heavy duty circuitbreakers.e) Switchyardequipments….
Specificelectric
resistance:
9.8 X 10
/CM
9
�
- 25°C TO+205°C
2 Years plus evenoutdoors.
Will not dry-up or wash-off.
26. Pure, fully dry graphite coatingdesigned to prevent bi-metalliccorrosion, improve lowconductivity & prevent arcing,overheating, jamming…. In 11KV & higher voltage systems
Heavy duty bus-bars,cable terminations, bus-bar isolator jaws, circuitbreakers……..
upto 85 F0
NA Indefinate
CASE PACKING
6 X 500 Gms. Polyjars
CASE PACKING12 X 500ml / 12.0 oz Aerosol sprays
CASE PACKING12 X 700ml / 14.0 oz Aerosol sprays
24. # Z983KONTACTLUBE (SP)
Di-electric, fully dry film, anti-tarnish & anti-carbonisation,contact lubricant.
Improves current flow, reducescontact resistance & preventsarcing, sparking, pitting &carbonisation
Contactors, relays,switches, pcb connectors,circuit breakers, exposedelectrical conductors......
-75°F To+360°F
24 KV a) Indoors- 12 months
b) Outdoors- 6 months
CASE PACKING12 X 700ml / 13.0 oz Aerosol sprays
S.No.
Product DescriptionSpecifications
Applications
FlashPoint
Temp.Range
Color & Odor
29.
30.
WEICONFREEZ ON
ELECTRICAL CLEANING KITS:
IMP:
8 aerosols at the same price as per each aerosol spray plus 500/- extra for accessories: kit box, a pair of latex
gloves, an EN 1661.F clear ultralight protective polycarbonate safety lens spectacle & 02 FFP2 odor class particulate respiratory protection masks:-
Customers can infact select any 8 products from the electrical MTC products range & make a convenient kit of their choice, with the above
accessories @ Rs. 500/- per set remaining the same.
Ultra rapid evaporation, ozonefriendly rapid surface cooling/freezing mixture for fault findingin electronics.
To identify intermittentfaults in PCB circuits &electronic components.
None NAAlmost odorless
28. WEICON LEAKDETECTORSPRAY
Non flammable, non-corrosivecompound used for fast,convenient & reliable location ofeven the smallest leaks in SF 6gas filled circuit breakersFree of chlorides & halogens.
"Chiorine Free"
Ultra safe detection ofleakages in gas filledSF-6 circuit breakers.
None 0 - 50°C Milky, Almost odorless
CASE PACKING12 X 400ml Aerosol sprays
CASE PACKING12 X 500ml Aerosol sprays
V. BATTERY MTC PRODUCTS�
�
�
�
�
Prevent current losses & battery failures.
Ensure optimum life & battery power output.
Cleaner-for regular battery maintenance.
Coating-for preventing sulfation in applications whereregular terminal cleaning is not feasible.
Sulfuric acid resistant anti-corrosion coating for long term
metal & concrete protection.
31. # Z911CORROCLEAN(SP)
Foam type battery terminalsulfation cleaner cum acidneutraliser. Incorporatesunique "Acid Indicator"dye.
S.No.
Product Description
Specifications
Applications
TYPE SAFETY
Regular battery cleaning as well as surfaceconditioning prior to application of batteryterminal coating. Thick foaming actionenables "in-situ" usage.
Alkaline foam All metal, plastic &rubber safe.
32. # 6005 (R)BATTERYTERMINALCOATING(RED EPOXY)
Conformal, acid resistant dryfilm epoxy protective coatingfor long lasting protection.
Will not crack, peel-off orpick-up dust.
Prevents sulfation & acid corrosion onbattery terminals, battery boxes….especially where regular cleaning is notfeasible.
Prevents battery damage & ensures batterylife & output reliability
Chemical resistantepoxy coating.
All metal, plastic &rubber safe.
33. # 6006BATTERYTERMINALCOATING(WAXY FILM)
Air tight, water proof & acidresistant waxy coating thatprevents sulfation &corrosion on batteryterminals, especially thosewhere terminal“dismantalling” prior tocoating application is notpossible.
Battery terminals, connections, connectorplates……
Waxy film air dries to form a dry outersurface that will not pick up dust/ dirt)
Chemical resistantsynthetic waxycoating
All metal, plastic &rubber safe.
34. # 6007ACID PROACID RESISTANTEPOXYCOATING
High build two partsolventfree epoxy coatingwith exceptional resistanceto sulfuric acid.
Excellent resistance tovibration, shock & hightemperature (upto 90°C).
Battery metal cases, stands,compartments…….
Solvent free acid &chemical resistantepoxy coating
Exceptionaladhesion toproperly preparedsubstrates.
5yrs Plus protectionlifespan minimum
Pot Life : 20minSet Time : 4-6 hrsFull Cure : 120 hrs
CASE PACKING12 X 700ml / 18.0 oz Aerosol sprays
CASE PACKING12 X 500ml / 13.0 oz Aerosol sprays
CASE PACKING12 X 700ml / 14.0 oz Aerosol sprays
CASE PACKING4 x 1.5 Kg. Sets
V. BATTERY MTC PRODUCTS
VI. JUNCTION BOX SEALING & ANTI-CORROSION PRODUCTSVI. JUNCTION BOX SEALING & ANTI-CORROSION PRODUCTS
�
�
�
�
�
�
�
Excellent adhesion & gap / cavity sealing of most materials (except PE & PP)
Puf self expanding : one component high thermal & sound insulation. Verygood cavity filling capacity. Excellent stability (no shrink or post expansion)
Silicone RTV : neutral oxime curing, elastical one component joint sealant.Low modulus. Low odor & non-corrosive to metal.
Di-electric industrial paints in OSHASafety colors.
Super tough acid & alkali resistant di-electric synthetic rubber coating.
U. V. curing fiber glass sealing cum repair patch.
Standard version as well as unique "360" spray action multi position foam.
35.(a)
(b)
Self-expanding CFC free, one componentpolyurethane foam sealant.
S.No.
Product DescriptionSpecifications
Applications
SkinFormation
CuringTime
Temp.Range
Sealing cable penetrations & joints,gap filling, pipe sealing, roof repair,thermal and sound insulation, telecom& AC duct sealing, sealing arounddoors & windows, machinery gap &cavity sealing / filling…
8-10minutes
8-10minutes
- 40° to+ 90°C
- 40° to+ 90°C
30-45minutes
20-25minutes
# Z201PUFSEAL (1K-S)
# Z2206360 PUF 3X
CASE PACKING12 X 500ml / 294 gms nett Aerosol sprays
CASE PACKING12 X 700ml / 589 gms nett Aerosol sprays
FILL CAVITIES BETWEEN
PIPES AND WALLS
INSTALLATION OF ELECTRICAL
WIRING
INSTALL AND SEAL ELECTRICAL &
TELECOM EQUIPMENT
FILLING OF CAVITIES FILLING OF OPENINGS IN WALLS
AND PARTITIONS
FILL GAPS BETWEEN WALLS AND
CORRUGATED ROOFS
THERMAL INSULATION OF PANELS FILL JOINTS BETWEEN WALLS AND
WALLS PANELS
SEAL AND FILL CONNECTION JOINTS INSTALL WINDOW FRAMES
APPLICATIONS
HOW TO USE
APPLY ADAPTOR TO CAN SHAKE CAN THROUGHLY
(KNOCK STEM IF NECESSARY)
SPRAY SURFACE WITH WATER
PRIOR TO APPLYING PU FOAM
APPLY FOAM REMOVE EXCESS CURED FOAM
WITH CUTTER KNIFE
#Z2206
#Z201
Multi-position "360 Spray Action" CFC Freeone component polyurethane foam sealant.
O
�
�
Provides easy gap filling, dust & moisturesealing as well as thermal & noiseinsulation.
Can be over painted, over coated withepoxies & fire retardant coatings.
�
�
Liquid PU foam, in contact withair expands, bonds & fillscavities of practically anymaterial shape & size.
Extremely easy to use.
S.No.
Product Description
Specifications
Applications
SkinFormation
CuringTime
Temp.Range
37.
38.
Di-electric, long lasting industrial paint inOSHA safety colors for the protection ofelectrical equipments
Super tough dielectric, thick flexible rubbercoating with excellent, chemical, abrasion& corrosion resistance.
Junction boxes, panel boards,electric motors & other electricalequipment….
Protecting cable trays, junctionboxes, cable terminations especiallyin marine & other highly corrosionprone environments.
15 Minto touch.
30Minto handle
1100V/Mil120minutes
- 16° to+149°C
0 - 300°F
72hours
# Z968SUPREMERUST SHIELD
# Z927RUBBEX
36.
Neutral oxime cure, elastical onecomponent RTV joint sealants.
Non shrinking, UV. Resistant & lowmodulas.
Excellent adhesion & long sealing lifespan.
# Z217 SILICOSEAL(AR);(unique aerosol packed for long shelf life &easier re-use. Available in red, black & clear)
# Z219 SILICOSEAL SILIRUB 2;(Cartridge packed).
Sealing joints, gasketing, thin gapfilling ......
Pre-monsoon sealing of junctionboxes, control panels....
5minutes
- 60° to+ 180°C
24hours
# Z219SILICOSEALSILIRUB 2(TRANSPARENT)
# Z217SILICOSEAL(AR)
39. U.V Curable fiber glass re-inforced polyesterrapid repair patches.
No messy mixing - simply cut open pouch,remove backing from adhesive side & press/wrap firmly into place. Bonds firmly & within60 minutes of exposure to either natural orartificial u.v. light. Cures into an ultra tough,non flammable, weather proof, virtually rotproof permanent plastic patch.
Junction box repair & sealing.
Cable sheathing, cable tray &conduct repair.
Upto200°C
60 Minutes 22 KV# Z880KWIK PATCH
CASE PACKING12 X 310ml Cartridges
CASE PACKING12 X 225ml / 7.25 oz Aerosol
CASE PACKING12 X 700ml / 15.0 oz Aerosol sprays
CASE PACKING12 X 700ml / 15.4 oz Aerosol sprays
CASE PACKING
6 Patches150mm x 75mm x 1.5mm
(Available in Red, Yellow, Black, Blue, Green, White, Light Grey & Meter Grey Color)
S.No.
Product Description
Specifications
ApplicationsActiveMaterial
5% SaltSpray Test
TempResistance
40. WEICON FEPROTECT-2000
CASE PACKING12 X 500ml / 14.0 oz Aerosol Sprays
VII. TRANSFORMER, TRANSMISSION &SWITCHYARD EQUIPMENT ANTI-CORROSION COATINGS
VII. TRANSFORMER, TRANSMISSION &SWITCHYARD EQUIPMENT ANTI-CORROSION COATINGS
FE-Protect is a special corrosionand weathering resistant surfacecoating made on the basis of iron-III-oxide (hematite).By using highly-purified iron oxidepigments in a flake-like structure,a permanent weathering andwater resistant surface protectionis achieved.
FE-Protect is used wherevermetal constructions andinstallations, which are exposed toextreme ambient and weatheringconditions, have to be protectedwith a long-lasting and opticallyattractive layer.
Long term protection against weatheringrust & corrosion
>90% Iron -III-oxide
99.9% PurityZinc/AL
>2.000hours
>550 hours
Approx.-50 C to+300 C
0
0
-50 C to+500 C
0
0
UNIQUE FEATURES
�
�
�
�
�
Even when the particles are shifted, the contact, conductivity andcathodic corrosion protection are maintained, as the pigments lieclosely on each other in sheets. This is, among other things, alsoespecially apparent due to the improved weldability of the coated metalsurface.
The penetration of water and moisture is considerably reduced, as theflakes have a strongly hydrophobic (water repelling) surface.
The surface of the coating is smoother and harder, resulting inimproved adhesion and greater strength of the coating.
The quality of the pigments in the new WEICON Zinc Spray meets thedemanding requirement profile of renowned industrial users. Long-term corrosion protection that even withstands a salt-spray test (DIN53167 and DIN 50021) of more than 550 hours is the result.
The use of the new WEICON Zinc Spray also results in advantages forthe appearance. The previous dull grey colour has been replaced by abright metallic appearance (similar to that of „slightly weathered“ hotgalvanising).
41. WEICONZINC SPRAY(New Improved)
CASE PACKING12 X 500ml / 13.0 oz Aerosol Sprays
The zinc flakes used in the newWEICON Zinc Spray have a large,specific surface geometry, andtherefore a high barrier effect(shingle effect).
Final layer with WEICON FE-Protect -Charcoal - Grey / Silver Grey
Intermediate layer with WEICON FE-Protect - Charcoal Grey / Silver Grey
Primer layer with WEICON Zinc Spray
Bright as wellas matt finish
5 - 10 yearsprotection
Applications : Transformers, Switchyards,Transmission Towers ....
Bright Finish3-5 years protection
�
�
Oxygen, humidity and other media cannot reach themetal surface - corrosion is prevented
S.No.
Product Description
Specifications
ApplicationsWorking Life FullCure
Hardness Temp.Range
43. # Z801FAST STEELEPOXY STICK
Hand mixable, steel reinforcedcomposite epoxy putty in stickform. Part A & Part B in oneconvenient to use form. Simply"cut-off" a piece as necessary,hand mix/knead & apply.
Fast setting. Very suitable foremergency repairs & rebuilds.
High strength, machinableindustrial strength polymercompound.
Excellent chemical resistance.
Seal leaks, fill cracks &voids, repair equipments,ducts, pipelines, rebuildsmall parts…
3-5 minutes 60 minutes Upto 150°C85Shore D
44. # Z711 (P)QUICKSTEELEPOXY PUTTY(PART A + B)
Fast setting di-electric 1:1mixing steel filled epoxy putty insoft easy to spread consistencywith excellent temperature,vibration & chemical resistance.
Cures underwater & in fluids.Imperious to most chemical,water, gas, diesel, fuel, oils,battery acids...non rusting finish.
Excellent as “an overlayepoxy” in leak sealingapplications as well as inall repair applicationsneeding a fast setting,high strength epoxyputty.
5 minutes Sets up in15 minutes.
Full cure/Machinablein 60 minutes
Upto 260°C87Shore D
45. LEAK REPAIR KITS CONTENTS
A) Z982IndustrialLeak RepairKit- Large
# Z711(P)Quicksteel
Epoxy Putty(1 X 1Kg)
# Z824Glass
Fiber Tape(2 X 2.5Mtr )
Roll
# SP98S4Strip It
(1 X 700Ml)Aerosol
Teflox HD1 X 200Gm
Tube
# Z801Faststeel
Epoxy Stick(4 X 4.Oz) Stick
# Z814One Minute
Putty(2 X 24Ml)Syringe
Kit1 Set Gloves
1 Set Applicator
# SP98E1Safety Solv
CO
(1 X 700Ml)Aerosol
2
B) Z983(K)Industrial LeakRepair Kit-Medium
# Z711(P)Quicksteel
Epoxy Putty(1 X 1Kg)
# Z801Faststeel
Epoxy Stick(2 X 4.Oz) stick
# Z814One Minute Putty
(1 X 24Ml)Syringe
# SP98E1Safety Solv CO
1 X 700MlAerosol
2
Kit1 Set Gloves
1 Set Applicator
# SP98S4Strip It
1 X 700MlAerosol
___ ___
C) Z984 IndustrialLeak RepairKit-Small
# Z711(P)Quicksteel
Epoxy Putty(1 X 1Kg)
# Z939Bearing Solvent
(1 X 700Ml)Aerosol
# Z711(S)Quicksteel
Epoxy Stick(1 X 4.Oz)
# Z814One Minute Putty
(1 X 24Ml)Syringe
Kit1 Set Gloves
1 Set Applicator
______ ___
CASE PACKING6 x 4 oz Stick
CASE PACKING4 x 1 Kg Sets
VIII. OIL FILLED TRANSFORMER LEAK REPAIRVIII. OIL FILLED TRANSFORMER LEAK REPAIR�
�
�
�
Steel reinforced-high strength epoxy putties.
Reliable performance. Easy to ensure correct ratios & mixing. Provide flawless, consistent
performance.
Excellent mechanical properties & resistance to vibrations, temperature, acids, alkali's,
chemicals... suitable for long lasting repairs especially in tough applications.
Superior “on-line” oil leak sealing. Easy to use kits.
42. # Z814"ONE- MINUTE"PUTTY
Steel filled, ultra fast settingepoxy putty.Extremely fast set-up high bond strength &surface adhesion foremergency leak sealing .
Ideal for emergency leakrepair, crack filling,joining, thread locking/repairing….
2 -3 minutes 60 minutes Upto 120° C88Shore D
CASE PACKING6 x 24ml Syringes
“THERE IS NO SECOND CHANCE WITH FIRE - DO IT RIGHT THE FIRST TIME”
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
Flammadur A77 is a Fire Suppression Coating especiallydesigned for protecting electric power cables, communicationcables, junction boxes - both against ignition as well aspropogation of fire.…
High solids, intumescent firestop coating is specificallydesigned to prevent fire ignition & spread of flame alongcombustible cables, cable tubing & cable trays as well as toprotect electrical junction boxes & control panels......from fire.
Coated surfaces will neither ignite nor propagate fire. Electricalsparks & short circuits can thus be prevented from convertinginto fires and thereafter spreading along vertical & horizontalcable ways. Fire can thus both be kept restricted to its sourceas well as also prevented all together.
Meets German standard DIN 4102.
Uniquely tested & approved as a fire retardant cable coating for "Grouped electrical cables" by Factory Mutual (FM)USA.
Tested & approved to IEEE standard 383- flame retardant coating for electric cables, field splices & connections fornuclear power generating stations.
Tested & approved to IEC 332-3 international electro technical commission- protection of electric cables under fireconditions. Fire on vertical cableways can spread @ 20 Mtrs/Minute. Flame spread on flammadur A77, in the 40minutes IEC 332-3 test has been restricted to less than 10 cms/40 minutes.
Highest % of solids, highest density heat insulation & best seal against fire ingress & fire propagation -. Flame initiation in junction
boxes & fire spread on cables & resulting fire damage is prevented better than any other product currently available onthe market today, as a comparative “BURN” test will easily confirm.
Current rating of coated electrical cables is not reduced. Thermal conductivity is better than that of PVC. Surface areaincrease created by coating application, thus infact enhances heat dissipation.”No derating” is thus required.
Besides fire proofing ability, chemically binds the nitrogen oxide & chlorine decomposition products released byPVC/Rubber combustible jacketed cables/tubing, thus also suppresses the generation of toxic combustion by- products<400%. Prevents the development & emission of HCL & other thick & poisonous toxic gases.
Long Lasting-Tested & Approved minimum 15 years (For outdoor applications or in wet areas needs to be overcoatedwith a suitable water/moisture resistant epoxy coating of a thickness of upto 50 um - as will not reduce the intumescentprotection properties of FLAMMADUR A77.)
Flexibility - unlike cheaper “cementatious type-thick film” fire protection coatings, PVC Cables of 12mm diameter coatedwth Flammadur - A77 may be bent to a 3cm radius without cracking. Results in reliable long term protection.
Prevents flame spread & fire propogation as well as heat damage. The intumescence (expansion) & heat insulationproperties are superior to most other such products & thus the quality & extent of fire protection is superior. Thinnercoatings are needed to achieve the desired protection goals.
Toxicity : Non Toxic. Free of asbestos & solvents.
#Z460 Flammadur A77 - Gray Water Resistant intumescent top coat for applications in areas of high humidity /weathering.
Solids > 70%.
Temperature Resistance : 1315 C.
Coating dries to touch in 4-8 hours & cures in 24-48 hours.
“UNIQUE PAINT LIKE, THIN FILMAPPLICATION-ULTRA HIGH INTUMESCENCE - HEAVYDUTY, LONG TERM, 100% RELIABLE FIRE PROTECTION"
"HIGHESTINTUMESCENCE / FIRE PROTECTION LEVEL AMONGST COATINGS OF THIS CLASS"
0
IX. WORLD CLASS FIRE SUPPRESSION SYSTEMSFROM M/S AIK-FLAMMADUR BRANDSCHUTZ
GMBH, GERMANY
IX. WORLD CLASS FIRE SUPPRESSION SYSTEMSFROM M/S AIK-FLAMMADUR BRANDSCHUTZ
GMBH, GERMANY
What is Fire and How Does it Work?
Product Features:
• Coating for Smoke and Fire Prevention
• Flame proofing of Consumable-Jacketed Cables
• A paint-like, intumescent substance which expands a minimumof 65 times by volume
• Does not melt or drip when exposed to the flame
• Highest % of solids, highest density heat insulation & best sealagainst fire ingress & propagation.
• Flexible "THICK-FILM PROTECTION". Will not cause cablesheath ageing unlike conventional "THIN-FILM". cementatioustype fire protection coatings.
• Current rating of cable is not reduced.
• Long Lasting Protection - Tested & approved minimum 15years.
Applications :
Flammadur A77 is typically applied as a continuous coating on power & communication cables but can also be appliedintermittently to serve as a “Fire Break” within a cable run - both interior & exterior applications (either top coat or useweather resistant - “WR” grade), for both vertical & horizontal cable runs on both single & grouped electrical &communication cabling, within cables trays as well as outside of cable trays.
Also effectively used in junction boxes, control panels..... any flammable substrate on which fire ignition/propogationare to be prevented.
The Physics of FireCables are a rich source of FUEL!
One FOOT of Loaded Tray = 150,000 BTUs*
*Fully Loaded 33 cm x 10 cm Tray
Equivalent to 4.2 liters of Petrol!
For Penetation Fire Stops.Consult the Factory Mutual
ResearchCorporation Approval Guide.
Flammadur A77 coating is applied by:
INSTALLATION METHOD
Tests:
• In 1991, tested ; and approved byINIEX in Beligium according to IEEEStandard 383, Paragraph 2.5.4 (1980)for “Flame Retardant Coating for ClassIE Electric Cables, Field Splices andConnections for Nuclear PowerGenerating Station.”
In 1991, tested and approved by ISEPIn Belgium according to internationalElectro-technical Commission IEC332-3 (1992-3) on electric cablesunder fire conditions.
In 1999, passed gamma radiationexposure of 200 millions rads atPhoenix Memorial Laboratory ofUniversity of Michigan, USA andsubsequent vertical burn test atFactory Mutual Research Corporation,USA.
New name Factory Mutual InsuranceCompany (FM Global TechnologiesLLC)
•
•
•
1999 Factory Mutual Tests:
Fiammadur® A77 Cable Coating meets Factory Mutual Approvalrequirement as per class 3971 for “Flame Retardant Coating for GroupElectric Cables.”
Passed flame test in an vertical exposure of 2 minutes. Flames didnot impinge or scorch the specimen above 5 inches (127 mm) fromthe flame and without degradation above 3 inches (76mm).
No. coating breakdown occurred when exposed to high voltage of1000 V for 1 minute before and after exposure to the fire.
A horizontal cable with A77 satisfied the Approval requirement thatleakage current shall not exceed 5.0 milliamperes when measuredbetween the conductor and the outer jacket during this high potentialtest of 1,000 volts.
A cable coated with A77 was subjected to saltwater test. There wasno disintegration or deterioration of the coating.
The cable sample then passed the fire tests and the applied highpotential test.
The Cable coated with A77 passed ampacity test, i.e., there was noelectrical derating necessary when a cavle was sprayed with A77.
•
•
• A horizontal cable coated with A77 satisfied the Factory MutualApproval requirement that burning shall not continue loger than oneminute after flame cutoff and electric shutdown and the burn(exposed) area shall not exceed 9 inches (128 mm) in length.
•
•
•
•
After
After
After
I. DI-ELECTRIC SOLVENT CLEANERSI. DI-ELECTRIC SOLVENT CLEANERS
SCREEN/ DISPLAY CLEANER(P) Weicon TFT/LCD Display
Cleaner
FLASHOVER CARBON CLEANER
(P) 8480 Carbon Cleaner
BATTERY TERMINAL
(P) #Z911 Corroclean
HEAVIER THAN WATER(Proprietary)
(P) #8070 Electrical 88 Co2(Long term protection)
(S) SP98E4 De-Moist.
HIGH FLASH POINT
(P) 8140 HFP CLEANER/ DEGREASER(140
OF Flash point)
GENERAL USE
(E) # 3070 Super 5(Alternate to CRC 2.26)
FLAMMABLE
(E) 1020 Super Spra-Nit
(Heavy duty/ “Kli-Nit” type)
GENERAL USE
(P) #415 Off Line Contact Cleaner (HD) Co2(Mild moisture displacing ability)
(S) #7075 Off Line E&E cleaner Co2 (F)(High Discharge)
(E) 1010 Super E-Kleen Co2(Light duty)
PARTIALLY PLASTIC SAFE
HEAVY DUTY
(P) #8060 Safety solvent Co2(High KB Value)
(S) #7030 Online powerjet Co2(High Discharge)
(S) Safety solv Co2(360
O)
PARTAL PLASTIC SAFETY
(P) 7066 Contact Cleaner Co2 (OKS 2621)(High discharge)
(S) SP98E3 Safe Klens (ELC) Co2
(S) SP98E5 Contact Cleaner (NF) Co2(360
o)
100% PLASTIC SAFE
(P) #Z902 Electrosafe Co2(Proprietary)
Weicon Compressed Air
HEAVY DUTY
(S) #7340 All 4 Co2(360
O)
AEROSOLS- ELECTRICAL CLEANERS(Note: All products are Di-Electric i.e. 100% non conductive
except foam based)
NON FLAMMABLE
DRY COMPRESSED AIR
FOAM BASED
PLASTIC SAFE
RESIDUAL PROTECTIVERESIDUELESS
LIGHTER THAN WATER
New
(P) #Z902 Electrosafe Co2(Proprietary)
AEROSOLS- ELECTRONIC MAINTENANCE
RESIDUELESS CLEANERS
FLAMMABLE100% Plastic safe low odor,dielectric precision solvent.
(P) 8376 Electronic Component Cleaner Co2 (F)(Ultra Safe)
(S) SP98E2 Safe Klens ELT Co2 (F)(Economic)
NON FLAMMABLE
Plastic safe, low odor.
PROTECTION- CLEARACRYLIC COATING
(P) #6004 Kleer Kote
(S) SP98E8 Plastikote
(E) Superon Plastikote
NOTE:
(P):- Premium Series
(S):- Superior Series
(E):- Economy Series
OTHER TECHNOLOGIES - FIRE STOP PRODUCTSOTHER TECHNOLOGIES - FIRE STOP PRODUCTS
FLAMMADUR MW FIRESTOP SYSTEMFLAMMADUR MW FIRESTOP SYSTEM
Flammadur A150 – Properties
Applications
• Mineral Wool density: 150 kg/m3 = 0.15 g/cm3 = 9.2 pcfMelting point; = 1000° C (1832° F)Board Dimensions: 1.2m x 60cm x 6cm (47.2” x 23.6” x 2.36”),for an opening area of 0.72m2 (7.75ft2), with 4boards/box.Max. opening, wall W x H = 1.2mx1m (47.2 inch x 39.3 inch)Max. opening, floor W x L = 1 m (3.9 inch) x unlimitedFire Rating of F = 2 hrs, T = 0, 1, 2 hour expected in testing byUL (Fire tested in Germany according to DIN standards, etc. Tobe tested for UL approval)
• In concrete walls and floors and in drywall and masonry wallswith the following penetrants:Cables (individual or grouped) power, control, data,communication, fiber opticCable trays, or racks (aluminum, steel, plastic)PipesDucts
••
•••
•
•••
• Fire and smoke resistant• Water based materials• Easy to install, remove and to re-install• Fair acoustical properties• No ampacity derating in cables• Free of asbestos, halogens, lead solvents, noxious vapors
Advantages
Flammadur A150
Flammadur A77
FlammadurE-473
top related