ldica semester:v year:2013-14 s.no date name ... - lbrce
Post on 26-Feb-2023
0 Views
Preview:
TRANSCRIPT
Faculty Name: G.Mahammed Rafi Subject Name: LDICA Semester:V Year:2013-14
S.No DATE NAME OF THE TOPIC NO.OF CLASSES REQUIRED
UNIT-1 OPERATIONAL AMPLIFIER 1 11/06/2013 Introduction to Op-Amp 1 2 12/06/2013 Basic information of Op-amp, Ideal and practical
Op-amp, 1
3 13/06/2013 Manufacturer designation, Ideal Op-Amp 1 4 14/06/2013 Op-Amp internal circuit, 1 5 14/06/2013 D.C Characterstics of Op-Amp 1 6 15/06/2013 A.C Characteristics 1 7 18/06/2013 Inverting Amp ,Non – Inverting Op-Amp , Voltage
follower 1
8 19/06/2013 Differential Amplifier,Inverting summing Amplifier 1 9 20/06/2013 Non-inverting summing Amplifier, Instrumentation
amplifier 1
10 21/06/2013 A.C amplifier, V to I and I to V converters 1 11 22/06/2013 Tutorial class 1 12 25/06/2013 Sample & hold circuits, Multipliers 13 26/06/2013 ,Divider,Discussing problems on applications of op-
Amp 1
14 27/06/2013 Basic,practical Differentiator, Basic Integrator, 1 15 28/06/2013 Basic Integrator,Comparators 1 16 29/06/2013 Tutorial class 1 17 02/07/2013 Applications of Comparator,Schmitt trigger 1 18 03/07/2013 Astable, monostable Multivibrators, 1 19 04/07/2013 Introduction to voltage regulators 1 20 05/07/2013 723 general purpose voltage regulator. 1 21 06/07/2013 Tutorial class 1
UNIT-II ACTIVE FILTERS 22 09/07/2013 Introduction,1st order LPF filters 1 23 10/07/2013 Introduction,1st order HPF filters 1 24 11/07/2013 Band Pass filters 1 25 11/07/2013 Band Reject filters, 1 26 12/07/2013 All pass filter ,Introduction to Oscillators 1 27 16/07/2013 RC,Wein bridge,Quadrature Oscillators 1 28 17/07/2013 Introduction to waveform generators, Triangular
Sawtooth waveform generators 1
29 18/07/2013 Square wave waveform generators 1 30 19/07/2013 Voltage controlled oscillator 1
UNIT-III TIMERS & PHASE LOCKED LOOPS &CONVERTERS
31 20/07/2013 Tutorial class 1 32 23/07/2013 , Introduction to 555 timer 1 33 24/07/2013 Functional diagram Description 1 34 25/07/2013 Monostable Operation of 555 timer 1 35 26/07/2012 , Applications of Monostable Operation of 555
timer 1
36 27/07/2012 Tutorial class 1 37 30/07/2012 Astable Operation of 555 timer 1 38 31/07/2012 Applications of astable Operation of 555 timer 1 39 01/08/2012 PLL - Introduction 1 40 02/08/2013 Analog, Digital phase detectors 1
41 03/08/2013 Tutorial class 1 42 06/08/2013 1st Mid Examinations 1 43 07/08/2013 1st Mid Examinations 1 44 08/08/2013 Principles and description of individual blocks
of 565. (Monolithic PLL) 1
45 13/08/2013 Monolithic PLL Capture range derivation 1 46 14/08/2013 Applications of PLL 1 47 16/08/2013 Introduction to basic DAC techniques 1 48 17/08/2013 Tutorial class 1 49 20/08/2013 , Weighted resistor DAC, R-2R ladder DAC,
Inverted R-2R DAC 1
50 21/08/2013 IC 1408 DAC 1 51 22/08/2013 Introduction to ADC techniques,comparator type
ADC,Counter type ADC 1
52 23/08/2013 Servo tracking ADC, Successive approximation ADC
1
53 24/08/2013 DAC,ADC Specifications,Integrating type ADC’s 1 UNIT-IV LOGIC FAMILIES
54 27/08/2013 Introduction to Logic families 1 55 28/08/2013 Classification of Integrated Circuits 1 56 30/08/2013 Characterstics of Logic families 1 57 31/08/2013 Tutorial class 1 58 03/09/2013 Standard TTL NAND Gate – Analysis &
characteristics, Open collector O/P’s 1
59 04/09/2013 Tristate TTL 1 60 05/09/2013 MOS Characterstics ,CMOS open drain and
tristate outputs, CMOS transmission gate 1
61 06/09/2013 IC interfacing - TTL driving CMOS & CMOS driving TTL
1
62 07/09/2013 Tutorial Class 1 63 10/09/2013 Design using TTL-74XX & CMOS 40XX series
Encoder,priority encoder,multiplexers 1
64 11/09/2013 Priority generators/checker circuits Demultiplexers & their applications, Digital comparator circuits
1
65 12/09/2013 Digital arithmetic circuits-parallel binary adder/subtractor using 2’s Complement system
1
66 13/09/2013 Code Converters 1 67 14/09/2013 Tutorial Class 1 68 17/09/2013 Decoders&drives for LED&LCD display 1 UNIT-V SEQUENTIAL CIRCUITS&MEMORIES 69 18/09/2013 ROM Architecture, 1 70 19/09/2013 ROM types & applications 1 71 20/09/2013 RAM architecture, Static RAMs 1 72 21/09/2013 Tutorial Class 1 73 24/09/2013 Dynamic RAMs 1 74 25/09/2013 Synchronous DRAMs 1 75 26/09/2013 Introduction to IC counters 1 76 27/09/2013 74XX & CMOS 40XX series of IC counters 1 77 28/09/2013 Tutorial Class 1 78 01/10/2013 Beyond the syllabus-Special Types of Memories 1 79 02/10/2013 Beyond the syllabus- Higher order Filters 1 80 03/10/2013 OVERVIEW OF UNIT-I 1 81 04/10/2013 OVERVIEW OF UNIT-II 1 82 05/10/2013 OVERVIEW OF UNIT-III 1 83 08/10/2013 OVERVIEW OF UNIT-IV 1 84 09/10/2013 OVERVIEW OF UNIT-V 1 TOTAL NO OF CLASSES 84 TOTAL CLASSES REQUIRED TO COMPLETE THE SYLLABUS 77
Faculty Name: R.ANJANEYULU NAIK Subject Name: CONTROL SYSTEMS
Semester: V Year:2013-14
Sl.
No. Unit Topic(s)
Tentative
Date Actual Date
No of Lec
Hours
1
UN
IT –
I
C
ON
TR
OL
SY
ST
EM
MO
DE
LL
ING
Introduction to Control Systems 10/06/13 1
2 Open loop and feedback systems 11/06/13 1
3 Characteristics of feedback control systems 12/06/13 1
4 Modeling of mech trans systems and TF 13/06/13 1
5 Modeling of mech rotational systems and TF 14/06/13 1
6
Transfer Function of electrical systems 17/06/13 1
7 Transfer Function of electrical systems 18/06/13 1
8
F-V and F-I analogy of mechanical systems 19/06/13 1
9 T-V and T-I analogy of mechanical systems 20/06/13 1
10 TUTORIAL 21/06/13 1
11 Rules for Block Diagram Reduction 24/06/13 1
12 F-V and F-I, T-V and T-I examples explanation 25/06/13 1
13 Example for BDR method 26/6/13 1
14 Intro. to Stepper motors, AC servo motor 27/06/13 1
15 Tutorial 28/06/13 1
16 DC servo motor & Synchros. 01/07/13 1
17 Transfer Function of AC &DC servo Motors 2/07/13 1
18 Signal Flow Graphs 3/07/13 1
19 Signal Flow Graphs and Mason’s Gain Formula 4/07/13 1
20 Tutorials 5/07/13 1
21 Example for SFG explanation 8/07/13 1
22 Previous question paper discussion 9/07/13 1
Sl.
No. Unit Topic(s)
Tentative
Date Actual Date
No of Lec
Hours
23
UN
IT –
II
TIM
E D
OM
AIN
AN
AL
YS
IS
Introduction to Time domain analysis
• Laplace Transformation Technique – Review
10/7/13 1
24 Standard Test signals 11/7/13 1
25 TUTORIAL 12/7/13 1
26 Time response of first order &second order
systems
15/7/13 1
27 Time Domain Specifications 16/7/13 1
28 Steady state error and static error coefficients 17/7/13 1
29 Concepts of stability 18/7/13 1
30 TUTORIAL 19/7/13 1
31 Routh Hurwitz criterion 22/7/13 1
32 Examples for RH C 23/07/13 1
33 Root Locus Concept 24/7/13 1
34 Root Locus Rules & problem solving 25/07/13 1
35 TUTORIAL 26/07/13 1 36
UN
IT –
III
FR
EQ
UE
NC
Y D
OM
AIN
A
NA
LY
SIS
Introduction to freq. domain analysis 29/7/13 1 37 Correlation between frequency domain and time 30/7/13 1 38 Stability analysis using Bode Plot Concept 31/07/13 1 39 Bode Plot – Problem Solving 01/08/13 1 40 Polar plot – Problem Solving 02/08/13 1 41 I MID EXAM 05/08/13 1 42 I MID EXAM 06/08/13 1 43 I MID EXAM 07/08/13 1
44 Problem on polar & nyquist plot 08/08/13 1
45 GM & PM –polar plot stability analysis 12/08/13 1
46 TUTORIAL 13/08/13 1
47 stability analysis – nyquist plot 14/08/13 1
48 Comparision b/n bode,polar & nyquist plots 16/08/13 1
49 Tutorial
19/08/13 1
50
UN
IT-
IV
CO
MP
EN
SA
TO
R
Introduction to COMPENSATTION
domain
20/08/13 1
51 Types of n/w - example 21/08/13 1
52 Lag compensator using RL &Bode plot 22/08/13 1
53 TUTORIAL 26/08/13 1
54 Lag compensator using RL &Bode plot-examples 27/08/13 1
55 Lead compensator using RL &Bode plot 30/08/13 1
56 Lag-lead compensator rules & construction 02/09/13 1
57 Comparision b/n lead-lag-lead-lag n/ws 03/09/13 1
58 Introduction to P-PI-PID controllers 04/09/13 1
59 TUTORIAL 05/09/13 1
60 introduction to the state variable concept &
methods
06/09/13 1
Sl.
No. Unit Topic(s)
Tentative
Date Actual Date
No of Lec
Hours
61 Build SSM from DE & TF 10/9/13 1
62 physical variable - phase variable and diagonal
forms from time domain
11/09/13 1
63 TUTORIAL/slip test
12/09/13 1
64
UN
IT-V
Solution of state equations - homogenous and non
homogenous cases
13/09/13 1
65 Properties of state transition matrix-&problems
on STM
16/09/13 1
66 Relation between transfer function and state
space models
17/09/13 1
67 Concept of Controllability& Observability & tests 18/09/13 1
68 TUTORIAL 19/09/13 1
69 SLIP-TEST 20/09/13 1
70 Beyond the syllabus: Discrete Control System 23/09/13 1
71 Introduction to Optimal & Robust control 24/09/13 1
72 Industrial automated systems & their applications 25/09/13 1
73 REVISION 26/09/13 1
74 REVISION 27/09/13 1
75 REVISION 30/09/13 1
76 REVISION 01/10/13
1
77 REVISION 2/10/13
1
78 REVISION 3/10/13
1
79 REVISION 4/10/13
1
80 REVISION 7/10/13
1
TOTAL NO. OF HOURS REQUIRED
TO COMPLETE THE SYLLABUS
68
Faculty Name: N.Prasad Subject Name: Computer Organization(Co) Semester: I Year: 2013-2014
S.No Date Name Of The Topic Unit No.
No. of Hours
Teaching
Method
Remarks
Register Transfer Language And Micro operations
I 17 BB,OHP
1 11-06-13 Introduction ,Overview of Syllabus 1
2 12-06-13 Basic Concepts related to Computers 1
3 12-06-13 Register Transfer language 1 4 13-06-13 Register Transfer, Bus and Memory
Transfer 1
5 14-06-13 Arithmetic Micro Operations 1 6 17-06-13 Logic Micro Operations 1
7 18-06-13 Shift Micro Operations 1 8 19-06-13 Shift Micro Operations 1 9 19-06-13 Tutorial 1
10 21-06-13 Arithmetic Logic Shift Unit 1
S.No Date Name Of The Topic Unit No.
No. of Hours
Teaching
Method
Remarks
11 24-06-13
Basic Computer Organization And Design: Instruction Codes
I 1 BB,OHP
12 25-06-13
Computer Registers, Computer Instructions Instruction Cycle
1
13 26-06-13 Computer Instructions- Instruction Cycle
1
14 26-06-13 Memory-Reference Instructions 1
15 28-06-13 Memory-Reference Instructions 1
16 1-07-13 Input-Output and Interrupt 1 17 2-07-13 Tutorial 1
Micro Programmed Control: II 17 BB,OHP
18 3-07-13 Control Memory 1
19 3-07-13 Address Sequencing 1
20 05-07-13 Micro Program Example 1 21 8-07-13 Micro Program Example 1
22 9-07-13 Design of Control Unit: Hard Wired Control
1
23 10-07-13 Design of Control Unit: Hard Wired Control
1
24 10-07-13 Micro Programmed Control 1 25 12-07-13 Tutorial 1
26 15-07-13 Central Processing Unit: 1
27 16-07-13 STACK Organization 1 28 17-07-13 Instruction Formats 1 29 17-07-13 Addressing Modes 1 30 19-07-13 Addressing Modes 1 31 22-07-13 DATA Transfer and Manipulation 1 32 23-07-13 Program Control 1 33 24-07-13 Reduced Instruction Set Computer 1 34 24-07-13 Tutorial 1
Pipelining and Vector Processing III 18 BB,OHP 35 26-07-13 Parallel Processing 1 36 29-07-13 Pipelining, Arithmetic Pipeline 1 37 30-07-13 Instruction Pipeline 1 38 31-07-13 RISC Pipeline 1 39 31-07-13 Vector Processing 1 40 2-08-13 Tutorial 1 41 5-08-13 MID I EXAMINATIONS 42 6-08-13 MID I EXAMINATIONS 43 7-08-13 MID I EXAMINATIONS 44 Computer Arithmetic 45 13-08-13 Fixed Point Representation 1 46 14-08-13 Floating-Point Representation 1
S.No Date Name Of The Topic Unit No.
No. of Hours
Teaching
Method
Remarks
47 14-08-13 Addition 1 BB,OHP 48 16-08-13 Subtraction 1 49 19-08-13 Multiplication Algorithms 1 50 20-08-13 Multiplication Algorithms 1 51 21-08-13 Division Algorithms 1 52 21-08-13 Floating-Point Arithmetic
Operations 1
53 23-08-13 Decimal Arithmetic Unit 1 54 26-08-13 Decimal Arithmetic Operations 1 55 27-08-13 Tutorial 1
Memory Organization IV 09 BB,OHP 56 28-08-13 Memory Hierarchy 1 57 30-08-13 Main Memory 1 58 2-09-13 Auxiliary Memory 1 59 3-09-13 Auxiliary Memory 1 60 4-09-13 Associative Memory 1 61 4-09-13 Cache Memory 1 62 6-09-13 Cache Memory 1 63 9-09-13 Virtual Memory 1 64 10-09-13 Tutorial 1
Input-Output Organization V 13 BB,OHP 65 11-09-13 Peripheral Devices 1
66 11-09-13 Input-Output Interface 1 67 13-09-13 Asynchronous Data Transfer 1 68 16-09-13 Asynchronous Data Transfer 1 69 17-09-13 Tutorial 1 70 18-09-13 Modes of Transfer 1 71 18-09-13 Modes of Transfer 1 72 20-09-13 Modes of Transfer 1 73 23-09-13 Priority Interrupt 1 74 24-09-13 Priority Interrupt 1 75 25-09-13 Direct Memory Access 1 76 25-09-13 Direct Memory Access 1 77 27-09-13 Input-Output Processor(IOP) 1 78 30-09-13 Serial Communication 1
79 1-10-13 Tutorial 1 80 2-10-13 UNIT 1 Revision 1 81 2-10-13 UNIT 1 Revision 1 82 4-10-13 UNIT 2 Revision 1 83 7-10-13 UNIT 2 Revision 1 84 8-10-13 UNIT 3 Revision 1 85 9-10-13 UNIT 4 Revision 1 86 9-10-13 UNIT 5 Revision 1
Faculty Name: B V N R SIVA KUMAR Subject Name: Microprocessor And Interfacing
Semester: V Year:2013-14
S.No. DATE
TOPIC
1 10-Jun-13
UN
IT I
Introduction - Microprocessor & Hexadecimal system
2 11-Jun-13 Architecture - Registers
3 13-Jun-13 Memory Segmentation, Registers usage
4 14-Jun-13 Instruction Format, Addressing Mode
5 15-Jun-13 MOV, XCHG instructions, Programs
6 17-Jun-13 Addressing Modes
7 18-Jun-13 Data Transfer Group, Programs
8 20-Jun-13 Data Transfer Group, Flags
9 21-Jun-13 Tutorial - 1
10 22-Jun-13 ADD & ADC instructions
11 24-Jun-13 Arithmatic Group, programs
12 25-Jun-13 Arithmatic Group, programs
13 27-Jun-13 Logical Group, Programs
14 28-Jun-13 Tutorial - 2
15 29-Jun-13 Logical Group, Programs
16 1-Jul-13 String instructions, Programs
17 2-Jul-13 Branching & Control group, Programs
18 4-Jul-13 Branching & Control group, Programs
19 5-Jul-13 Tutorial - 3
20 6-Jul-13 Assembler directives
21 8-Jul-13 Procedures & MACROs
22 9-Jul-13
UN
IT I
I
8086pin configuration, Memory interfacing
23 11-Jul-13 8086pin configuration, I/O interfacing
24 12-Jul-13 Tutorial - 4
25 15-Jul-13 Timing diagram
26 16-Jul-13 DMA Data Transfer
27 18-Jul-13 8237 Block Diagram & Interfacing
28 19-Jul-13 Tutorial - 5
29 20-Jul-13
UN
IT I
II 8255 PPI - Mode 0, Programs
30 22-Jul-13 DAC Interfacing, Programs
31 23-Jul-13 Stepper motors & Actuators
32 25-Jul-13 Modes 1&2, ADC Interfacing
33 26-Jul-13 Tutorial - 6
34 27-Jul-13 Key Board & Display interfacing
35 29-Jul-13 8279 Block diagram
36 30-Jul-13
Revision - Unit I
37 1-Aug-13
Revision - Unit II
38 2-Aug-13
Revision - Unit II
39 3-Aug-13
Revision - Unit III
40 8-Aug-13
I Mid Paper Discussion
41 12-Aug-13 U
NIT
IV
Interrupts, IVT
42 13-Aug-13 Interrupt Response, DOS Interrupts
43 16-Aug-13 Tutorial - 7
44 17-Aug-13 PIC 8259, Modes
45 19-Aug-13 Interfacing & Cascading
46 20-Aug-13 Serial data Transfer
47 22-Aug-13 8251 Architecture
48 23-Aug-13 Tutorial - 8
49 24-Aug-13 8251 Interfacing
50 26-Aug-13 Data Transfer programs,
51 27-Aug-13 USB
52 30-Aug-13 Tutorial - 9
53 31-Aug-13
UN
IT V
80286 & 80386 Specifications
54 2-Sep-13 Real & Protected mode
55 3-Sep-13 Features
55 5-Sep-13 paging
56 6-Sep-13 Tutorial - 10
57 7-Sep-13 Pentium features,
58 10-Sep-13 Branch Prediction
59 12-Sep-13 Overview
60 13-Sep-13 Tutorial - 11
61 16-Sep-13 8051 family specifications
62 17-Sep-13 Architecture
63 19-Sep-13 Pin configuration & Interfacing
64 20-Sep-13 Tutorial - 12
65 21-Sep-13 Timer operation
66 23-Sep-13 Timer modes
67 24-Sep-13 Serial Port
68 26-Sep-13 Interrupt structure
69 27-Sep-13 Tutorial - 13
70 28-Sep-13 8051 Overview
71 30-Sep-13
Revision - Unit I
72 1-Oct-13
Revision - Unit II
73 3-Oct-13
Revision - Unit III
74 4-Oct-13
Revision - Unit IV
75 5-Oct-13
Revision - Unit IV
76 7-Oct-13
Revision - Unit V
77 8-Oct-13
Revision - Unit V
Faculty Name: Prof.G.Mallikarjuna Rao Subject Name: Process control Instrumentation Semester:V Year:2013-14
Subject: Process control Instrumentation Faculty:
Sl.NO. Topic to be covered Hours Date 1 Block diagram of Process control system 1 2 Liquid level system-Laminar& Turbulent flows 1 3 Interacting system 1 4 Non-Interacting system 1 5 Pressure system 1 6 Temperature Process 1 7 Flow Process 1 8 Continuous & Batch Process 1 9 Self-Regulation, Problems 1 10 Tutorial 1 11 Discontinuous control modes 1 12 Discontinuous control modes 1 13 P,PI,PD Control modes 1 14 PID Control mode, Problems 1 15 Problems 1 16 Problems 1 17 Servo & Regulator operation 1 18 Proportional control of a single-capacity process 1 19 Proportional control of a Two capacity process 1 20 Integral & PI control of a process 1 21 PID control of a process, Frequency Response 1 22 Flapper Nozzle Arrangement, Pneumatic
proportional controller 1
23 Pneumatic PI,PD,PID Controllers 1 24 Hydraulic controllers 1 25 Hydraulic controllers 1 26 Electronic controllers 1 27 Electronic controllers 1 28 Electronic controllers 1 29 Evaluation Criterion(1/4th decay ratio) 1 30 IAE,ISE,ITAE 1 31 Problems 1 32 Problems 1 33 Continuous oscillation &PRC methods 1 34 Problems 1 35 I/P&P/I Converters 1 36 Pneumatic Actuators 1 37 Pneumatic Actuators 1
38 Hydraulic &Electro-pneumatic Actuators 1 39 Electric motor Actuators,Two position Actuators 1 40 Control valve 1 41 Various types of control valves, Problems 1 42 Globe& Ball valves 1 43 Diaphragm& Butterfly valves 1 44 Control valve sizing, Problems 1 45 Cavitations & Flashing, Problems 1 46 Cascade control 1 47 Cascade control 1 48 Cascade control 1 49 Feed forward control 1 50 Feed forward control 1 51 Feed forward control 1 52 Ratio control, Problems 1 53 Split range control 1 54 Multivariable control 1 55 Revision 1 56 Revision 1 57 Revision 1 58 Revision 1 59 Revision 1 60 Revision 1
Faculty Name:Mrs.B.Swathi Subject Name:PE Semester:V Year:2013-14
S.No. Date Topics to be covered 1 10-06-13 Introduction to Professional Ethics
2 12-06-13 Unit 1: Scope & Objectives of Engineering Ethics.
3 15-06-13 Approaches, Senses of 'Engineering Ethics'
4 17-06-13 Variety of moral issues, Types of inquiry
5 19-06-13 Moral dilemmas ,Moral autonomy
7 22-06-13 Kohlberg's theory & Gilligan's theory
8 24-06-13 Consensus and controversy, Models of Professional Roles
9 26-06-13 Utilitarian theory
10 29-06-13 Duty ethics Theory.
11 01-07-13 Right theory, justice theory
12 03-07-13 Virtue theory & Self realization ethics
13 06-07-13 Self interest
14 08-07-13 Customs & religions
15 10-07-13 Unit 2: Introduction, Morals, Values and Ethics,
16 15-07-13 Integrity, Work Ethics
17 17-07-13 Service Learning, Civic Virtue
18 20-07-13 Respect for Others, Courage, Living Peacefully
19 22-07-13 Caring, Sharing, Honesty
20 24-07-13 Valuing time Empathy, Self Confidence
21 27-07-13 Co-operation, Commitment
22 29-07-13 Character
23 31-07-13 Spirituality
24 03-08-13 Unit3: Engineering as experimentation
25 12-08-13 Engineering projects (vs.) standard projects
26 14-08-13 Engineers as responsible experimenters
27 17-08-13 The challenger case study
28 19-08-13 Codes of ethics, a balanced outlook on law
29 21-08-13 Unit 4: Introduction to Safety and risk assessment of safety and risk.
30 24-08-13 risk benefit analysis and reducing risk, Collegiality and loyalty
31 26-08-13 Respect for authority collective bargaining
32 28-08-13 Confidentiality, conflicts of interest
33 31-08-13 Conflicts of interest types, Occupational crime
34 02-09-13 Professional rights, employee rights.
35 04-09-13 Intellectual Property Rights (IPR) discrimination.
36 07-09-13 Intellectual Property Rights (IPR) discrimination
37 11-09-13 The Three Mile Island and Chernobyl case studies
38 16-09-13 Unit 5:Introduction, Multinational organisations
39 18-09-13 Computer ethics
40 21-09-13 computer crimes ,privacy &anonymity
41 23-09-13 Environmental ethics
42 25-09-13 Weapons development
43 28-09-13 Consulting engineers,
44 30-09-13 Engineers as managers
45 05-10-13 Engineers as expert witnesses and advisors
46 07-10-13 Moral leadership
47 09-10-13 Sample code of Ethics in general & specific to EIE
Faculty Name: D.V.LAKSHMI & J.BHARATHI Subject Name: LICA - LAB Semester: V Year:2013-14
S.No. Week Date Experiment Remarks
1. Thursday 14/06/2013 Introduction
2. Tuesday 18/06/2013 Introduction
3. Thursday 20/06/2013 OP-Amp applications-Adder, Subtractor Comparator circuits.
4. Tuesday 25/06/2013 Integrator & Differentiator circuits using IC 741.
5. Thursday 27/06/2013 Active filter applications-LPF&HPF (First order).
6. Tuesday 2/07/2013
7. Thursday 04/07/2013 IC 741 Oscillator circuits-Phase shift &Wien Bridge oscillator.
8. Tuesday 09/07/2013
9. Thursday 11/07/2013
Function generator using OP-Amp.
10. Tuesday 16/07/2013
11. Thursday 18/07/2013 IC 555 Timer- Monostable & Astable Multivibrator
12. Tuesday 23/07/2013
13. Thursday 25/07/2013
Schmitt Trigger using IC 741 & IC 555
14. Tuesday 30/07/2013
15. Thursday 01/08/2013 Voltage Regulator using IC 723.
16. Tuesday 13/08/2013
17. Thursday 22/08/2013
Three terminal voltage regulators-7805,7809&7912
18. Tuesday 20/08/2013
19. Thursday 29/08/2013 3-bit DAC using OP-Amp.
20. Tuesday 2/09/2013
top related