deep drawing & pressing lubricants

DEEP DRAWING & PRESSING LUBRICANTS

High Performance Oil for Drawing, Pressing and Bending Operations

Extends die/mandrel life and maintains fine machined surface due to presence of high performing chosen oil additives. Oil provides a high reduction ratio as it forms a strong lubricating film thereby reducing friction. Does not cause discoloration on the surface of metals and maintains a clean machined surface after annealing. Capable of withstanding high loads and stresses and helps avoid cracking during forming operations. Does not evolve any toxic fumes at high temperatures. An eco-friendly non toxic product that does cause eye or skin irritation.Contains chosen EP additive package.

SmoothPress 9020 (EP)

Benefits

Applications

Ferrous materials like carbon steel, alloy steel, stainless steel and non-ferrous. Applications like metal pressing/deep drawing/ tube or pipe bending. For various sheet metal applications in presses. Adheres well to surface and can be used by brushing or using pressurized lubrication system.

Medium Viscosity, Chlorinated, heavy duty forming fluid

Light amber coloured fluid. Recommended for heavy duty deep drawing applications using EDD, IF steel. Also suitable for S.S., Nickel, Alloy Steels as well as non ferrous metals. Suitable for severe operations including cold pilgering. Recommend use of ECOKLEEN alkaline cleaner.

SmoothDraw 2800 HD

Suitable for use on medium and heavy gauge steels including stainless steel and alloy steel as well as on ferrous metals.

Benefits

Applications

High Performance Oil for Drawing Operations

Extends die/mandrel life and maintains fine machined surface due to presence of high quality improvement agent. Does not cause discoloration on the surface of metals and maintains a clean machined surface after annealing. An eco-friendly non toxic product that does cause eye or skin irritation.

SmoothDraw 9020

Ferrous materials like carbon steel, alloy steel, stainless steel and non-ferrous. Applications like metal deep drawing/tube or pipe bending.

Benefits

Applications

Heavy Duty Paste for Severe Drawing Applications & Pressing

Very good load carrying capacity. Contains anti wear additives. Formulated with special friction modifiers. Help reduce friction and operating temperatures in formed components.

SmoothPress 4800 HD

Applications like metal pressing/deep drawing/cold forming. Multiple use as internal and external oil according to the processing requirement. For various sheet metal applications in presses. Adheres well to surface and can be used by brushing or using pressurized lubrication system.

Benefits

Applications

High Performance Forming oil/High Perfomance Forming Paste

Highly refined chlorinated paraffin oil blend. Contains extreme pressure and lubricating additives for high loads and optimum performance. Forms tenacious film providing excellent lubricity. Superior surface finish of components. Extends tool life thereby reducing valuable die life. Compatible with materials like steel, stainless steel, aluminum and its alloys.

SmoothForm 5000/SmoothForm 5000 HD

Heavy duty deep drawing components. Cold pilgering of tubes. Suitable for fine blanking and stamping of parts like latches, chain components and various other auto and engineering applications.

Benefits

Applications

Easily pumped and can be applied by brush, roller or spray system. May be applied through central lubricator or drip feed. Easily washed off using aqueous cleaners and is easily removed after storage of finished parts. E-coat compatible and can be used with confidence where parts must be electrocoated. Non-staining-can be used on most ferrous materials.

It is recommended for use in light to heavy metal forming operations where water-washable products are required and also for all sheet metal drawing operations including deep drawing of cold rolled and coated sheet strip.It is compatible with Electrocoat Paint Systems and phosphating systems. It can be used either in neat form or diluted with water for less arduous operations to adjust viscosity to desired level. It is specially recommended for applications like fuel tank forming using Zn-Ni coated steel or stainless steel. Drawing applications presently using polythene sheets dipped in soluble cutting oil, use of SmoothForm Aqua 2800 will avoid the usage of polythene sheets.

Benefits

Applications

To choose the MOLYGRAPH adapted to your requirements, do not hesitate to consult usProduct

Anand Engineers Pvt. Ltd.66 M.I.D.C., Road No.13, Andheri (E), Mumbai - 400 093. INDIA.Tel No: +91-22-28219292 \ 98 \ 99Fax No: +91-22-28379337

Email: sales@molygraph.comWeb: www.molygraph.com

Water Emulsifyable Forming FluidSmoothForm Aqua 2800