converting machinery - arque · info@arque.com · carretera del mig, 54 · 08907 l’hospitalet de...

Machine speed

Tolerance

Energy supply:

Compressed air:

Net weight

Maximum roll width

Minimum label width

Minimum label length

Ø max. unwinding labels

Ø max. rewinding labels

Core labels inner diameter

Dispensing speed

Label material

Max. 50 mt. / min (Depending on Pitch)

Converted self – adhesive label material with adhesive

Maximum width (including backing paper)

Up to 160 mm

Label length

Label roll unwinder outer diameter

Label roll rewinder outer diameter

Core labels inner diameter

5 to 600 mm

Up to 300 mm

Uo to 200 mm

3”

Max. 70 mt. / min(Depending on the type of work to be fulfilled)

+-1 mm

3 – N/PE, 400V, 50HZ, 5A

6 Bar

600 Kg

Up to 180 mm

25 mm

Dispensing label pitch x 1,3

400 mm

400 mm

3”

TECHNICAL INFO

LABEL DISPENSER

MAIN LABEL SPECIFICATIONS

Main material Auxiliary label(ex. RFID tags)

Sefl-adhesive material

Finished label(ex. Pocket-tags)

TYPE OF JOB

info@arque.com · www.arque.comCarretera del Mig, 54 · 08907 L’Hospitalet de Llobregat

+34 932 615 300

SIMPLE DISPENSATION & LAMINATION

C180 SDLCONVERTING MACHINERY

Main material label roll

Guidance system

Label dispenser

Vision system control

Self-adhesive material

Self-adhesive material waste

Lamination zone

Slitting zone

Slitting waste rewinding system

RFID verification system

Data display

Finished material Roll

1

1

7

4

10

2

8

5

11

3

9

6

12

2

3

4

56

7

9

8

10

12

11

Main material label roll is unwinded passing through the guidance system to ensure accurancy during the process.

Pre-printed marks on main label are required.

Lamination system add a self-adhesive material to the labeled main material.

Right after, two adjustable blades trim the leftover edges.

Trims are rewinded in a waste roll shaft while finished material is perfectly rewinded in the finished roll material shaft.

Additionally, we offer the possibility to install a RFID verification system.

Material pass to the labeling system which dispense the auxiliary label (ex. RFID tags) when detects the pre-printed marks.

Right after labeling, we offer the possibility to install a vision system control. Empowered with a camera and powerfull but “easy to use” software, allows to control the quality of the work regarding position of labeling. Recommended for high speed working uses.

C180 SDLCONVERTING MACHINERY