brochure nooteboom osd-73-04
Post on 01-Apr-2016
333 Views
Preview:
DESCRIPTION
TRANSCRIPT
OSD-73-04(S)
HIGH PAYLOAD - MAXIMUM MANOEUVRABIL ITY
4-AXLE SEMI LOW-LOADER FOR THE TRANSPORT OF PLANT MACHINERY
T R E N D S E T T E R S I N T R A I L E R S
OSD-73-04 (S) non-extendible incl. excavator trough (DESIGN) WEIGHTS Excl. options (in tonnes) 80 km/h 30 km/h EG (40t) GB(cat. 3) Fifth wheel load max. 25,0 31,2 25,0 32,5 Axle bogie load max. 44,0 54,5 32,0 57,2 Gross (GVW) 69,0 85,7 ~33,0 89,7 Dead weight, app. 13,5 13,5 13,5 13,5 Net payload, app. 55,5 72,2 ~19,0 76,2
CONFIGURATIONS
spare wheel clamp on headboard easy to operate
OSD-73-04V (S) extendible, incl. excavator trough (DESIGN) WEIGHTS Excl. options (in tonnes) 80 km/h 30 km/h EG (40t) GB(cat. 3) Fifth wheel load max. 25,0 31,2 25,0 32,5 Axle bogie load max. 44,0 54,0 32,0 57,2 Gross (GVW) 69,0 85,7 ~33,0 89,7 Dead weight, app. 14,5 14,5 14,5 14,5 Net payload, app. 54,5 71,2 ~18,0 75,2
easy to operate excavator trough (only S and V(S) models) loadfloor width extension
OSD-73-04(S)4-AXLE SEMI LOW-LOADERS
HYDRAULIC RAMPSDue to the low inclination angle ofthe 4 metre folding ramps, loading and unloading is safe and secure.
STEERING AXLES2 self-tracking rear axles for improved
manoeuvrability and to reduce tyre wear.
EXCAVATOR TROUGH IN LOADFLOORExcavator trough at the rear of the load fl oor to
reduce the height of the dipper arm whentransporting excavators.
TÜV CERTIFIED LASHING RINGSFully load-bearing in
all directions: Horizontal 360º -
Vertical 150º.
EXTENDIBLE LOADFLOOR
LOADFLOOR WIDTH EXTENSIONSliding outrigger brackets to increase the width of the loading deck to 3240mm, supplied with outrigger timber enlargement beams.
EXTREMELY DURABLE DUE TO METAL SPRAYING
TÜV CERTIFIED LASHING RINGSFully load-bearing in
all directions: Horizontal 360º -
Vertical 150º.
LOADING ON GOOSENECKU-channel with timber protection and hook on gooseneck hop-up ramps.
OSD-73-04(S)4-AXLE SEMI LOW-LOADERS
As an option, the vehicle can be metal-sprayed. A corrosion-resistant alumi-
nium-zinc alloy is applied by means of thermal spraying. After this treatment
the surface is left slightly rough, which is ideal for the primer to adhere to.
After the anti-corrosion treatment follows the application of two layers of PUR
primer, the adhesive coat and corrosion-prevention for the paint.
The trailer is sprayed– wet on wet in two coats – with high-quality
polyurethane (PU) paint that provides an extremely hard, durable gloss and
excellent scratch resistance. The coating will keep the trailer looking good for
the next 10 to 12 years.
OSD-73-04V (SN) extendible (DESIGN) WEIGHTS Excl. options (in tonnes) 80 km/h 30 km/h EG (40t) GB(cat. 3) Fifth wheel load max. 25,0 31,3 25,0 32,5 Axle bogie load max. 44,0 54,4 32,0 57,2 Gross (GVW) 69,0 85,8 ~33,0 89,7 Dead weight, app. 14,5 14,5 14,5 14,5 Net payload, app. 54,5 71,3 ~18,0 75,2
certified TÜV lashing rings rear end slope to maximise loading space
CONFIGURATIONS
INCLUDED AS STANDARD
• 2” or 3.5” interchangeable kingpin • Detachable steel Headboard, 400mm high• Aluminium boards on the front half of gooseneck,
400mm high, 3 pieces• Spare wheel mounted on a headboard carrier• 300mm Detachable Sliding Bolster• Sliding width enlargement brackets, 250mm per side• 80mm hardwood enlargement beams, with securing
angle brackets • Steel EC Side guards underneath, from the
landing gear till the foremost axle• Gooseneck: 2 pairs Nooteboom droprings,
TÜV certified (LC 5.000 daN) in the side raves• Loading bed: Nooteboom droprings, TÜV certified
(LC 10.000 daN) in the side raves every app. 1,3m• Loading bed: lashing hooks 20mm thick under the side
raves every app. 1m• Loading bed: ferry rings 18mm thick under the side
raves every app. 1,3m• SAF axles, with modern compact hub design• Air suspension with raise/lower control• Tyres Michelin 245/70R17,5 on steel rims, twin mounted• Spray suppression with side plates at each axle and
spray flaps behind each tyre• U-channel against the gooseneck’s rear with timber
protection• 2 Steel hook-on hop-up ramps to the gooseneck, 1,50m
x 0,55m. Cap. 1,75 tonnes wheel load• 2 telescopic legs under the rear beavertail to improve the
stability during loading/unloading• 2 complete mounting provisions for flashing beacons at
rear left and right (1 beacon included)• 4 extension marker signs red/white striped, with LED
lights. Storage provision on the headboard for the rear pair• 1 pair of stake pockets between 3rd and 4th axle, plus 2
clamps to mount the marker signs over the loading floor• The mounting ramps have provisions to mount the rear
extension marker signs
(Standard equipment basic execution, excl. options)
rear end slope to maximise loading space
WWW.NOOTEBOOM.COM
Nooteboom Trailers B.V. Nieuweweg 190 - P.O. Box 155 - 6600 AD Wijchen - Netherlands - Tel. +31 24 64 888 64 - info@nooteboom.com
T R E N D S E T T E R S I N T R A I L E R S
top related