beeco acv presentation
Post on 25-Feb-2016
31 Views
Preview:
DESCRIPTION
TRANSCRIPT
BEECO ACV PRESENTATION
Main Applications
Level Control Pressure Control Pump Control
Flow Control Safety ValvesElectronic Control
LADWP Project
What are Beeco’s ACV main differentiators?– Better Performance:
• Better pressure control at very low flows and at very high flows. Larger flow range.
– Lower Cost of Ownership:• Reliability – Better materials being used as standard.• Maintainability – Simpler structure than competitors.• Shelf Life – More resistance to cavitation, where others fail.
– Wider Control Solutions Range– Extensive Support:
• Design phase: consultation in control application selection and valve type selection
• After sale support
a
b > a
b
Small diam.By-Pass
V-Port(V or U shape)
Reduced Port
Performance: Stable regulation at low flows
Our competitors use inferior solutions at low flows:
Beeco uses a patented and superior solution for low flow regulation which:– Does not requires by-pass – Does not affect the valve when fully open (like V-port)
Beeco ACV Low-Flow stability solution:
Low pressure-losses when fully open
FULLY OPEN REGULATING
Able to regulate at near zero flow rate.
• No need for V-Port
• No need for by-pass
These two valves can regulate the same low flow!
Performance: Cavitation Index
Low cavitation index will enable safe operation under high pressure differential and low operation noise.
Beeco ACV valves were tested for cavitation by the hydraulic laboratory of Utah State university.
Low Cost of Ownership:– Easy maintenance and service
(trim is pulled upwards)– Low weight internal trim– No need for special tooling– No periodic parts replacement, greasing etc.– Self-flushing control filter– Same standard valve used for low and high flow– Standard internal SST internal trim (up to 200mm)– No preventive maintenance (just periodic inspection at long
intervals)
Long term operation with minimal operational costs!
Hyd. Control Solutions
Control Solutions:– A full range of hydraulic control solutions using a wide variety
of control devices– Pressure Control applications– Flow control application– Water level control solutions– Safety and protection devices for water-supply systems,
pumping systems etc.– Water hammer\Surge prevention & attenuation– Automated & Remote control of the hydraulic parameters
Support
Pre-Sale Support:
Design phase assistance in:
– Hydraulic control solution selection
– Supplying computerized, Water-Hammer\Surge analysis
– Tailoring the solution to the specific requirements
Enquiry (end customer or engineer/designer)
Intake, Questionnaire, Gathering of Information
Technical Considerations,Data Calculations,
Software Simulation
Solution Specification & Draft Layout
Provision of Valve Solution
Support
Additional Support:– Training programs– Technical back-up – One stop shop for a wide variety of supplementary
devices
top related