aluminium rollers

MADE IN ITALY

ALUMINIUM ROLLERS

Alveolar aluminium rollers, diameter 60mm to 250mm (natural or anodized). Roller manufacturing will be completely based on customer's drawings. The rollers can be supplied with stainless steel heads or pins. Viable options: heat, galvanic, silicone treatments and on-request coatings.

PR

OD

UC

TIV

E

1 4

2 6 2.1 62.2 62.3 7

3 8 3.1 83.2 9

4 10 4.1 104.2 11

5 12 5.1 12

6 13 6.1 136.2 136.3 146.4 157 16 7.1 167.2 167.3 177.4 17

10 21 10.1 2110.2 2110.3 2110.4 21 22

11 24

8 18 8.1 198.2 198.3 198.4 19

9 20 9.1 209.2 20

IDLE ROLLERS WITH BEARING HOUSING DESCRIPTION HEADS ASSEMBLY

IDLE ROLLER WITH PLASTIC HEADS DESCRIPTION

SPECIAL APPLICATIONS ASSEMBLY OF PIN AND LOCKING SET MOUNTING WITH ZA TYPE LOCKING RING FOR 20/25/30 DIAMETER SHAFTS COOLED ROLLER SPECIAL ROLLER

ROLLBLOCK ROLLBLOCK TECHNICAL SHEET ADVANTAGES APPLICATIONS WEIGHTREQUEST/ORDER FORM

MATERIAL INFORMATION

SURFACE MACHINING SURFACE TURNING SPIRAL GROOVING RADIAL DRILLING SURFACE BRUSHING

SPECIAL STORAGE BEARING ASSEMBLY BEARING MOUNTING THROUGH-SHAFT DOUBLE-BEARING PINS

SURFACE TREATMENTS AND COATINGS SURFACE TREATMENTS SPECIAL COATINGS

IND

EX

PROFILES

TECHNICAL INFORMATION LOAD AS A FUNCTION OF ROLLER TENSION DEFLECTION AS A FUNCTION OF LOAD P LOAD AS A FUNCTION OF DEFLECTION

VERSIONS WITH FIXED PINS DESCRIPTION PINS ASSEMBLY

4 |

1

B

S3

A

6x60°

S2 S1

4 | 5

PR

OF

ILE

S

* ATTENTION! DIAMETER 60: 8 SLOTS.

- Roughness of natural surface Ra=3,2 µm- Roughness of anodized surface Ra=1,6 µm

D

E

F

C

1 2 3 4

B

A

321 5

C

D

4 6 7 8

A

B

DATA

DATA: 15/02/2018DISEGNATO

APPROVATO

TRATTAMENTO SUPERFICIALE (surface �nishing):

REVISIONI

MATERIALE (material):

DESCRIZIONE (Description)

N. DISEGNO (n° drawings)

SCALA:1:1 FOGLIO 1 DI 1

A3

PESO: kg

NOME CLIENTE

gg/mm/aaaa xx

QUOTE SENZA TOLLERANZA SPECIFICA UNI EN22768 -mK(dimension without speci�c indication UNI EN22768 - mK)raggi non quotati R=0.5(radius without indication r=0.5 mm)smussi non quotati 1x45°(edges without indication 1x45°)

Note:xx

B A

All the information refer to standard profile, supplied with anodized surface. On request, FAIT supplies the roller balanced, coated and with rubber coverings. FAIT supplies bars in length up to 7 meters. Upon request, FAIT manufactures them on customer's design.

f = Deflection (mm)P = Load equally distributed (daN) + own weight (daN)ℓ = Roller length (m)

Ø A mm 60 75 81 HD 85 100 100/5 120 140 160 L 160 200 250

Tolerance mm ± 0,2 ± 0,2 ± 0,15 ± 0,2 ± 0,2 ± 0,25 ± 0,3 ± 0,3 ± 0,3 ± 0,4 ± 0,5 ± 0,8

Ø B 27 40 45 40 45 45 60 60 46 70,2 108 108

S1 2,5 2,5 3 2,5 2,5 3 4 3,5 3,5 4 4 5

S2 2 2,2 3 2,5 2,5 5 3 3,5 3 4 4 5

S3 1,8 2 2 2,5 2,5 3 3 3,5 3 4 4 4

Weight Kg/m 2,101 2,687 3,61 3,277 4,040 6,200 6,302 7,862 7,970 10,357 13,900 19,190

Elasticitymodulus DaN mm2

6900 6900 6.900 6900 6900 6900 6900 6900 6900 6900 6900 6900

Max non-concentricitymax. mm

0,2 0,2 0,15 0,2 0,2 0,3 0,4 0,4 0,4 0,4 0,6 0,6

Linearitymm/m 0,2 0,2 0,2 0,3 0,3 0,3 0,4 0,4 0,4 0,4 0,6 0,6

Jx mm4 205.030 464.844 765.729 744.040 1.260.567 2.043.500 2.735.130 4.778.660 6.078.090 8.167.180 17.455.670 37.910.050

Deflection mm

p.ℓ3 / 110

p.ℓ3 / 250

p.ℓ3 / 390

p.ℓ3 / 400

p.ℓ3 / 670

p.ℓ3 / 981

p.ℓ3 /1400

p.ℓ3 /2495

p.ℓ3 / 2720

p.ℓ3 / 4330

p.ℓ3 / 8950

p.ℓ3 / 20140

6 |

10

100

1'000

10'000

250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000

Ø 60

Ø 60

Ø 75

Ø 75

Ø 85

Ø 100Ø 81 HD

Ø 100

Ø 81 HD

Ø 100/5

Ø 100/5

Ø 120

Ø 120

Ø 140

Ø 140

Ø 160

Ø 160 L

Ø 160

Ø 160 LØ 200

Ø 200

Ø 250

Ø 250

Carico [DaN]

Lunghezza[mm]

Ø 85

6 | 7

2.1

D

E

F

C

1 2 3 4

B

A

321 5

C

D

4 6 7 8

A

B

DATA

DATA: 15/02/2018DISEGNATO

APPROVATO

TRATTAMENTO SUPERFICIALE (surface �nishing):

REVISIONI

MATERIALE (material):

DESCRIZIONE (Description)

N. DISEGNO (n° drawings)

SCALA:1:1 FOGLIO 1 DI 1

A3

PESO: kg

NOME CLIENTE

gg/mm/aaaa xx

QUOTE SENZA TOLLERANZA SPECIFICA UNI EN22768 -mK(dimension without speci�c indication UNI EN22768 - mK)raggi non quotati R=0.5(radius without indication r=0.5 mm)smussi non quotati 1x45°(edges without indication 1x45°)

Note:xx

B A

FIGURA 21

FIGURA 23

FIGURA 21

FIGURA 23

2.2

2Load P related to tension T and angle of tension

Fig. 2.1

Angle α 10° 20° 30° 40° 50° 60° 70° 80° 90°

0,174 0,347 0,518 0,684 0,845 1 1,147 1,286 1,414

Angle α 100° 110° 120° 130° 140° 150° 160° 170° 180°

1,532 1,638 1,732 1,813 1,879 1,932 1,970 1,992 2

P = Load on the roller (daN); T = Tension of material (daN); α = Angle of tension (°)

TE

CH

NIC

AL

INF

OR

MA

TIO

N

Deflection as a function of load P

P = Load distributed on roller (daN) + own weight (daN); ℓ = Roller length; f = Deflection (mm).

Fig. 2.2

Deflection = 204,03 x (1,5)3 ≅ 2,75 mm 250

P = 200 x 1 = 200 daNWeight = 1,5 x 2,687 = 4,03 Kg = 4,03 daNPtot = 200 + 4,03 = 204,03Given the load Ptot acting on the roller, you can estimate deflection.

EXAMPLE

You want to know the deflection on a 1.5 meter long roller (diameter 75) carrying ribbon material whose tension is 200 daN set at a winding angle of 120° on the roller (Fig. 2.3).

Load Ptot on the roller; sum of the weight of the roller and the load of the ribbon material.This will be α = 60° and therefore = 1

Fig. 2.3

Determining load P as a function of tension T and of the angle of tension αP = T • The values of tension of material α in the following table.

Ø A mm 60 75 81 HD 85 100 100/5 120 140 160 L 160 200 250

Jx mm4 205.030 464.844 765.729 744.040 1.260.567 2.043.500 2.735.130 4.778.660 6.078.090 8.167.180 17.455.670 37.910.050Elasticitymodulus DaN mm2

6900 6900 6900 6900 6900 6900 6900 6900 6900 6900 6900 6900

Deflection mm

p.ℓ3 / 110

p.ℓ3 / 250

p.ℓ3 / 390

p.ℓ3 / 400

p.ℓ3 / 670

p.ℓ3 / 981

p.ℓ3 /1400

p.ℓ3 /2495

p.ℓ3 / 2720

p.ℓ3 / 4330

p.ℓ3 / 8950

p.ℓ3 / 20140

10

100

1'000

10'000

250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000

Ø 60

Ø 60

Ø 75

Ø 75

Ø 85

Ø 100Ø 81 HD

Ø 100

Ø 81 HD

Ø 100/5

Ø 100/5

Ø 120

Ø 120

Ø 140

Ø 140

Ø 160

Ø 160 L

Ø 160

Ø 160 LØ 200

Ø 200

Ø 250

Ø 250

Carico [DaN]

Lunghezza[mm]

Ø 85

2.3

10

100

1'000

10'000

250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000

Ø 60

Ø 60

Ø 75

Ø 75

Ø 85

Ø 100Ø 81 HD

Ø 100

Ø 81 HD

Ø 100/5

Ø 100/5

Ø 120

Ø 120

Ø 140

Ø 140

Ø 160

Ø 160 L

Ø 160

Ø 160 LØ 200

Ø 200

Ø 250

Ø 250

Carico [DaN]

Lunghezza[mm]

Ø 85

Length(mm)

Load(daN)

Load in daN for 0,1% deflections of the length between supportsEXAMPLE L = 1500 Deflection = 1,5 mm

Deflection is proportional to the applied load. For example, if there is a double deflection compared to that shown in the table, you will get a double load and so on.

EXAMPLE

You want to know the load generating a max. deflection of 4 mm on a 1.5 meter Ø 100 roller, cut across diameter 100 curve with the 1500 mm axis, you will get a value just under 300 daN.

At this load, you will get a deflection of 0.1% of the overall length. The requirement was having a deflection of 4 mm, therefore the load will be P = 300 ÷ 1,5 ∙ 4 ≅ 800 daN.

Calculating any deflection for the final load, you will get 4.06mm.Note: the graph is in a base-10 logarithmic scale and considers the weight of the roller.

Fig. 2.4

Load as function of deflection

8 |8 |8 |

3.1

9

3V

ER

SIO

NS

WIT

H F

IXE

D P

INS

Upon request, FAIT supplies pecial pins (i.e. browning or galvanized ones).

Upon request, key-grooved rollers can be supplied.

Caps can be suitable up to 120 diameter, in aluminium or stainless steel (when clearly declared).

Upon request, FAIT performs a statical/dynamic balancing (6.3 balancing grade). If the number of turns is not declared, dynamic balancing is 300 RPM.

Description

Fig. 3.1

Fig. 3.2

disegno con traccia 0,5

disegno con traccia 0,416 per il catalogo che ha il disegno inserito al 120%

A-A

A

A

3.2

Pin + plastic cap, suitable forØ 60, Ø 75, Ø 85, Ø 100, Ø 120.

Fig. 01.01

Pin + aluminum cap, suitable for all diameters.

Pin + seeger-blocked aluminium caps. Option for balanced and/or coated rollers.

Fig. 01.02 Fig. 01.03

Pins assembly.

Fig. 01

Fig. 01.04

Pin with aluminum cap and fixing screws. Option for rollers working in environment whose temperature is more than 100 degrees.

Pins assembly

10 |10 |10 |

4.1

Fig. 4.1 Testata norma le

E

FD

B

Fig. 4.2 Testata ridotta

F

2,5

E

11

4

IDLE

RO

LLE

RS

WIT

H B

EA

RIN

G H

OU

SIN

G

MATERIAL: STEEL OR ALUMINUMThe smaller head, for diameter larger than 100mm, is aimed at reducing roller weight. Natural option can be supplied upon request for all diameters.

Customer's requirement with burnished or galvanic-plated treatments. If not clearly declared, head will not have any surface treatment.

FAIT performs housing heads according to customer's drawing.


Bearing 620215x35x11

620317x40x12

620420x47x14

620525x52x15

600630x55x13

620630x62x16

620735x72x17

620840x80x18

620945x85x19

621050x90x20

B mm 15 18 18 (Ø 60)22 for others Ø 22 22 22 22 25 (Ø 100-120-140)

18 (Ø 200-250) 18 18

D mm SAME AS EXTERNAL DIAMETER OF ROLLERE mm 11 12 14 15 13 16 17 18 19 20Ø F mm 35 H7 40 H7 47 H7 52 H7 55 H7 62 H7 72 H7 80 H7 85 H7 90 H7

Fig. 4.1 Normal head. Fig. 4.2 Smaller head. Fig. 4.3

Description

Type of head Normal Smaller

Ø roller 60 75 - 85 81 HD - 100 - 100/5 - 120 - 140 81 HD - 100 - 100/5 - 160 L 120 - 140 160 200 250

Recommended bearings

620262036204

620462056206

62056206620762086006

62026203

6204620562066006

62056206

620862096210

6208620962106212

A

A

SI ESEGUONO SOLUZIONI SPECIFICHE A DISEGNO DEL CLIENTE



A

A


4.2

A

A


Standard head.

Fig. 02.01

Standard head and internal seeger.

Fig. 02.02

Heads assembly.

Fig. 02

Smaller head + plastic cap, suitable for Ø 60, Ø 75, Ø 85, Ø 100, Ø 120.

Fig. 02.03

Smaller head + aluminum cap, suitable for all diameters.

Fig. 02.04 Fig. 02.05

Smaller head + seeger-blocked aluminium cap. Option for balanced and/or coated rollers.

Fig. 02.06

Embed head.

Fig. 02.07

Plastic head. Up to diameter Ø 120.

Fig. 02.08

Smaller head with aluminum cap and fixing screws. Option for rollers working in environment whose temperature is more than 100 degrees.

As described on page 12.

Fig. 02.09

Custom-designed smaller head.

A-A

Heads assembly

12 |


disegno con traccia 0,297 e 0,06per il catalogo che ha il disegno inserito al 168%

5.1

D F

GB

Fig. 5.1

D F

GB

Fig. 5.1

13

5ID

LE R

OLL

ERS

WIT

H P

LAST

IC H

EAD

S

Fig. 5.1

MATERIAL Heat stabilised combination of polyamide 6 reinforced with the addition of 30% glass fibre. Technopolymer heads can be up to 80% lighter than standard options. They have been designed for double bearings option.Warning! They work properly up to 110 degrees.

HEAD WEIGHTØ 60 Ø 75 Ø 85 Ø 100 Ø 100/5 Ø 120

gr. each 40 80 100 130 130 220


Description

Housing Ø 60 Ø 75 Ø 85 Ø 100 - 100/5 - 120Bearing 6204 - 6303

20x47x14 - 17x47x146205 - 6304

25x52x15 - 20x52x156205 - 6304

25x52x15 - 20x52x156206 - 6305 - 6007

30x62x16 - 25x62x17 - 35x62x14

B mm 23 24 25 25

D mm SAME AS EXTERNAL DIAMETER OF ROLLERF mm 47 52 52 62G mm 14 19 19 20


disegno con traccia 0,297 e 0,06per il catalogo che ha il disegno inserito al 168%

6.1

6.2

6 S

PE

CIA

L S

TO

RA

GE

Idle roller with bearings and ABU ring. Suitable for through shaft.

Idle pin with double bearings.

Fig. 6.1 Fig. 6.2

SECTION A-A

DETAIL BDETAIL A


Bearing assembly

Bearings option

BA

Ø 60 Ø 75 - 85 Ø 81 HD - 100 - 100/5 - 160 L Ø 120 - 140 Ø 160 Ø 200 - 250

Bearing

6001(12x28x8)

6004(20x42x12)

6204(20x47x14)

6206(30x62x16)

6306 (30x72x19)

6408(40x110x27)

6902(15x28x7)

6302 (15x42x13)

6005(25x47x12)

6305(25x62x17)

6207 (35x72x17)

6310(50x110x27)

6905(25x42x9)

6303(17x47x14)

6007(35x62x14)

6910 (50x72x12)

6212(60x110x22)

6906(30x47x9)

6908(40x62x12)

14 |

ASSIEME ASTA PASSANTE




A

A

15





6.3

Standard head.

Fig. 03.01

Through-shaft.

Fig. 03

Fig. 03.02

Smaller head + plastic cap, suitable for Ø 60, Ø 75, Ø 85, Ø 100, Ø 120.

Smaller head + aluminum cap, suitable for all diameters.

Fig. 03.03

Smaller head + aluminium cap seeger-blocked. Option for balanced and/or coated rollers.

Fig. 03.04

Embed head.

Fig. 03.05

Plastic head. Up to diameter Ø 120.

Fig. 03.06

Bored roller.

Fig. 03.07

A-A

Fig. 03.08

Smaller head with aluminum cap and fixing screws. Option for rollers working in environment whose temperature is more than 100 degrees.

Seeger-blocked shaft.

Fig. 03.S

Through-shaft



6.4

Double bearings assembly.

Fig. 04

Double bearings and standard head.

Fig. 04.01

Double bearings and smaller head + aluminum cap, Ø 200, Ø 250.

Fig. 04.02Double bearings and smaller head + aluminum cap, Ø 200, Ø 250. Option for balanced and/or coated rollers.

Fig. 04.03

Double bearingsand bored roller.

Fig. 04.04

Double bearings pins

16 |

7.2

7.1

17

SEEGER ZA***

A disegno con traccia 0,5


CL800



CL700

7


disegno con traccia 0,2 per il catalogo che ha il disegno inserito al 200%d

SPEC

IAL

APP

LIC

ATI

ON

S

Mounting of the locking set.

Fig. 7.1

* Please, ask to FAIT's technical department.

Assembly of pin and locking set

Mounting with ZA type locking ring for 20/25/30 diameter shafts

***Self locking ZA type ring for d=20/25/30 diameter shafts. Mounted via pressure. It cannot be removed.

DETAIL A

7.3

7.4

Mounting with ZA type locking ring for 20/25/30 diameter shafts

CONNECTION FOR ROTARY COUPLING

CONNECTION FOR ROTARY COUPLING

Cooled roller

Special roller

18 | 19

8.3

8.4

8.1

8.2

2.8/3.0 0.3

2.8/3.0 0.3

8SU

RFA

CE

MA

CH

ININ

G

Upon request, FAIT performs surface turnings to improve roller concentricity and linearity.

Upon request, FAIT performs also grooves(pitches: 25mm).

FAIT performs radial drillls according to customer's design drawing.

Upon request, FAIT performs surface brushing for natural rollers. It makes roller surface more regular and slightly opaque.

* Please, ask to FAIT's technical department for not-standard pitches.

Radial drilling

Surface brushing

Surface turning

Spiral groove

Fig. 8.2

STANDARD GROOVE 25/50

20 |

9.2

9.1

21

9SU

RFA

CE

TREA

TMEN

TS A

ND

CO

ATI

NG

S

Special coatings for rollers include Rollstrip rubber coverings or natural/synthetic rubber.

FAIT performs also:

- Hard anodising;- Teflon coating;- Plasma coating;- Vulcanized rubber-coating.

Rubber strip "ROLLSTRIP"

Special Coatings

Surface treatments

Fig. 9.3

10.1

10.2

10.4

10.3

Ø d

L2 L L3L1

BLOCK 10

RO

LLB

LOC

K‹ P

ATEN

TED

›

Safety chuck.

Fig. 10.1

Self-locking bar for cardboard tubes measuring 3'' ( Ø int. 76).

Less Weight No Compressed airCustom made pins

Kg 2,900 for meter, 3'' length.

Textile IndustryTanning IndustryPaper IndustryPackaging Industry

Rollblock technical sheet

Advantages

Weight

Applications

CARDBOARD TUBES

22 |

ØE

ØD

ØE

ØD

L

L

Ø =

BC B C

Ø Ø ØØ =

Ø

ØE

ØD

ØE

ØD

L

L

Ø =

BC B C

Ø Ø ØØ =

Ø

23

ORDER

STANDARD SIZED JOURNALS

FORMS

CUSTOM-DESIGNED PINS

FEATURES

SURFACETREATMENT NORMAL ANODIZED OTHER

BALANCING YES NO

COATING NONE

RPM REVS/MINUTE

CUSTOMER INFORMATION

CUSTOMER

QUANTITY

PRICE

DELIVERY

NOTE

Ø 60 Ø 75 Ø 81 HD - 85 Ø 100 - 100/5 Ø 120 - 140 Ø 160 L - 160 Ø 200 - 250

B (mm) 20 30 30 30 30 30 20

C (mm) 40 120 120 120 120 120 60

D (mm) 17-20-25 20-25 20-25-30 25-30 30-35 30-35 30-35-40

E (mm) 25 40 40 40 50 50 50

L tot =

L cilindro =

Ø Ø

Ø

L

Ø

L tot =

L cilindro =

Ø Ø

Ø

L

Ø

ORDER FORMS

CUSTOM-DESIGNED HEADS

FEATURES

SURFACE TREATMENT NORMAL ANODIZED OTHERBALANCING YES NOCOATING NONEHEAD NORMAL SMALLERLOCK SEEGER ABURPM REVS/MINUTE

CUSTOMER INFORMATION

CUSTOMER

QUANTITY

PRICE

DELIVERY

NOTE

BEARING HOUSING STEEL ALUMINIUM TECHNOPOLYMER

TYPE OF HEAD NORMAL SMALLERBEARING Ø AXLE BEARING Ø AXLE

Ø 60 6202 - 6203 - 6204 15 - 17 - 20Ø 75 - 85 6204 - 6205 - 6206 20 - 25 - 30

Ø 81 HD - 100 - 100/5 - 160 L 6205 - 6206 - 6207 - 6208 25 - 30 - 35 - 40 6202 - 6203 15 - 17Ø 120 - 140 6205 - 6206 - 6207 - 6208 25 - 30 - 35 - 40 6204 - 6205 - 6206 20 - 25 - 30

Ø 160 6205 - 6206 - 6007 25 - 30 - 35Ø 200 - 250 6208 - 6209 - 6210 40 - 45 - 50

24 | 25

11

AUTO

GENO

US:

GOO

D

HETE

ROGE

NEO

US:

GOO

D

ELEC

TRIC

AL A

RESI

STAN

CE:

GOO

D

INDU

STRI

AL:

FRO

M S

UFFI

CIEN

T

URBA

N-RU

RAL:

GOO

D

MA

TE

RIA

L IN

FO

RM

AT

ION

GENERAL PHYSICAL FEATURES OF ALLOY (APPROXIMATE VALUES)

SPECIFIC WEIGHT 2,70 Kg/dm3 LINEAR COEFFICIENT OF THERMAL EXPANSION

INFINITE MELTING POINT 600° C from 20 to 100°C 23x10-6 °K -1

SPECIFIC HEAT AT 100° C 890 J/Kg °K from 20 to 200°C 24x10-6 °K -1

THERMAL CONDUCTIVITY AT 20° C from 20 to 300°C 25x10-6 °K -1

R VALUE 0,50 cal s -1 cm -1 °C -1 RESISTIVITY AT 20°C

TA VALUE 0,42 cal s -1 cm -1 °C -1 R VALUE 3,14μΩ•cm

TA VALUE 3,25μΩ•cm

ELASTIC MODULUS 6900 Kg/mm2

EXTRUSIONS

AS DELIVERED CONDITION CROSS SECTION THICKNESS

TENSILE STRENGTH

INR Kg/mm2

MECHANICAL FEATURES

BRINELL HARDNESS

Kg/mm2NAME SYMBOL Max mm3 5 mmYIELD POINT

INR Kg/mm2

ELONGATIONA - X

RAW EXTRUSION MATERIAL

RAP

1200012000

--

9-1412-18

5-87-12

20-3016-25

30-4530-45

ToN RECOVERED ToN 12000 - 14-18 8-14 16-20 35-50

ToA RECOVERED ToA - Up to 12Up to 8

19-2621-27

15-2117-20

11-1812-18

50-7060-80

TA16 RECOVERED TA16 - Over 8 and

up to 12 20-26 16-22 12-18 60-80

TECHNOLOGICAL FEATURES

ALLOY 6060 PLASTICITY FEATURES

MACHININGFEATURES

POLISHINGFEATURES

WELDINGFEATURES

RESISTANCE TO THE ELEMENTS

REACTION TO ANODIC

OXIDISATION

R GOOD POOR POOR GOOD*HP GOOD POOR POOR GOOD*TN GOOD POOR POOR GOOD**ToN GOOD POOR POOR GOOD**ToA POOR GOOD GOOD GOOD**TA16 POOR GOOD GOOD GOOD**

CHEMICAL COMPOSITION PERCENTAGE

CUmax

FEmax Mg SI Mn

maxZn

maxTI

maxCr

maxOVERALL IMPURITY

excludingFe e Ti max

ALREMAINDER

HYPOTHETICAL ALLOY - - 0,45 0,45 - - - - - -

IN SEMI-FINISHED PRODUCTS 0,10 0,35 0,38 - 0,5 0,35 - 0,5 0,1 0,1 0,1 0,1 0,3 REMAINDER

HeadquartersFAIT Group SpAVia Scarpettini, 367-369

59013 Oste Montemurlo (PO) Italy

Tel. +39 0574 68121

Fax +39 0574 681262

[email protected]

Filiale di MilanoFAIT Group SpAVia Talamoni, 57

20861 Brugherio (MB) Italy

Tel. +39 02 26708477

Fax +39 02 26708887

[email protected]

GermanyFAIT De GmbHGerd Schäfer (Vertretung D/AT/CH)

Tel. +49 (0) 7151-33011

Fax. +49 (0) 7151-33063

Mobile: +49 (0) 151-25307794

[email protected]

MAGGIO - MAY - KANN 2020

aluminium rollers

Documents