agitators brochure tacmina

General-purpose, Fixed Element Type

For reduced maintenance and energy and space savings in mixing processes

General-purpose, Removable Element Type

Sanitary Finishing Type

Corrosion-resistant Ceramic TypeCorrosion-resistant PVC Type

N10 Series N60 Series

N30 Series

N50 Series CSM Series

Both ends of the element are welded to the housing, with six elements provided for asingle module as standard. Select thenumber of modules according your speci�c requirements. This type is widely used for mixing, dispersion, neutralizing, extraction,and other general applications.

This type is used for the same applications as the N10 series. However, the element is only welded onto a ring so that it can be removed from the housing, making it ideal forprocesses that require disassembly for cleaning.

This sanitary type conforms to the same standards for sanitary piping used in food processing plants and supports CIP cleaning. The main unit and element can be easily removed and attached, making it ideal for processes that require disassembly for cleaning.

An element made of ceramic treated with special glaze is used. The surface of this element is smooth, making it dif�cult for scale to adhere and highly resistant to wear. Housings in various materials are alsoavailable so that you can select the material best suited to �uid characteristics. This typeis used both in water treatment processesand chemical processes.

On this static mixer, all of the element,housing and �ange are made of PVC. Thistype is used in applications where piping leading to and exiting the installation is madeof PVC, mainly in drinking water and purewater treatment. This type can also be madein impact-resistant PVC or heat-resistant PVC. It can also be reinforced with an FRP outer sheath.

Speci�cations

Shape and dimensions

Bottom shapeDimensions

Tank states

Tank

Liqu

idA

gita

tion

Properties

SolidsPowder

Liquid amount

Purpose

Time

Liquid (gas) contact materials

Motor

Square (V x H x H)Round (dia. x H)Base height

Flat bottomMirror bottom

Sealed

OpenPressure

TemperatureIndoor/outdoorLiquid nameViscositySpeci�c gravity

Liquid temperature

Solid particle nameSolid particle speci�c gravity

Solid particle diameter

Slurry concentration (%)

Spherical bottom

Precipitation speed (mm)Maximum/minimum

Decrease during agitationIdling

Uniform mixingDissolvingPrecipitation prevention

Heat transferReactionDispersionPolymerizationDepositionGas dispersion

OtherBatch type

Continuous access type

Flow speed

FlowrateRetention timeSelected materials at liquid contacting parts

Selected materials at gas contacting parts

Power supply (V, Hz)Motor type

Noritake Static Mixers with No Driven Parts

Static mixer and static mixer applied products are developed and manufactured by Noritake Company Limited. TACMINA sells these products on an engineering dealership basis.

Notify us of the following when inquiring about TACMINAagitators.

CAUTION● Do not use agitators that do not conform to

explosion-proof speci�cations in explosive or �ammable atmospheres. Doing so might result in explosion or �re.

● Before stopping agitators for inspection and maintenance, be sure to turn the power OFF.

Also, attach the "WORK IN PROGRESS. DO NOT TURN POWER ON" tag on the switch to prevent other personnel from turning the agitator ON by mistake.

● Never perform racing agitators on which racing is prohibited. Also, never perform racing agitators while the liquid level is rising above the

vanes. Doing so might damage the agitator.● Do not use agitators outside of speci�ed product

operating ranges. Doing so might result in electric shock.

www.tacmina.com

Agitators

EC-025 (5) 05

2015/1/ASS

C M Y K TM_00115517_H01_H04_1412_1_1

Model Code

M T O 0.1 1 S31 2 4

1 2 3 54 6

6

Models Suited to Speci�c On-site Needs

Vertical Agitators

Portable Agitators

Horizontal Agitators

5

Select from three types - vertical, portable, horizontal - to suit pre- and post-manufacturing processes and on-site conditions.

Extensive Applications

TACMINA Agitators for All Agitation and Mixing NeedsManufacturing processes not only in the food and chemical industries but also in all sectors of industry are diversifying. Agitators are now required to immediately meet varying on-site conditions. TACMINA's range of agitators has been further enhanced to cover agitation of liquids, slurry, kneaders, static mixers, and other related equipment.Select the ideal model to suit your on-side requirements as if you are ordering a custom-made machine.

1 2

These agitators are �xed at the top part of tanks, and their shafts are inserted vertically for use. Two features of these agitatorsis a long service life andlittle vibration.

Compact and lightweight, these highly portable agitators can be easily attached onto or removed from the top edge of tanks or support bases.

These agitators are mounted directly onto the side wall of tanks, and are used for large-capacity tanks ordeep liquid tanks, or when there are height or other restrictions.

Variable Speed Model (custom order)

Liquid contact materials1: SUS3042: SUS3163: Rubber lining4: PE lining5: PVC lining

TACMINA Agitators for All Agitation and Mixing Needs

Chemical industryUniform mixing of various raw materials, suspension, reaction, melting, promotion of heat transfer, dispersion, various chemical plants, etc. (soap, paint, etc.)

Food industryHigh-precision mixing of raw food materials, suspension melting, heat transfer, etc.(sugar, alcohol, tempura coating, etc.)

Chemical industryHigh-precision mixing of raw chemical materials, suspension melting, heat transfer, etc.

Petrol industryBlending, gas absorption, reaction, extraction, suspension of sludge, etc. (petrol, gasoline,re�ning, etc.)

Papermaking industryUnform agitation of chest and black liquor, etc.

Fermenting industryAeration, promotion of fermentation, mixing of solutions, etc.

Fat industryHeating, mixing, extraction, reaction, storage, etc.

Rubber industrySuspension polymerization, extraction, melting of rubber, etc.

Textile industryHigh-viscosity polymer mixing, melting of dye, mixing of glue materials, etc.

Coal relatedSlurri�cation, COM adjustment, prevention ofCOM precipitation, gasi�cation adjustment tanks, etc.

Water treatmentWaste water treatment, surface aeration, chemical adjustment, waste liquid treatment, etc.

Prevention of air pollution

Exhaust-gas desulfurization (plaster slurry tank), etc.

For medium speeds(gear reducer type)

GT

For medium/low speeds(geared motor reducer type)

M T

For medium/low speeds(cycloid reducer type)C1T (for processes)

For medium/low speeds(cycloid reducer type)

C2T (for water treatment and general use)

For medium speeds(belt reducer type)

BT

Belt reducertype

Agitators for bottom surfaces can also be controlled.

Ring cone reducer type

Cycloid reducertype

For medium/low speeds(geared motor reducer type)

M S

For medium speeds (belt reducer type)BL

For medium speeds(gear reducer type)

GS

Transmission methodG: Gear reducerM *: Geared motor reducer typeB: Belt reducer typeC1: Cycloid reducer type (for processes)C2: Cycloid reducer type (water treatment, general

purpose)

TypeS: Portable typeT: Vertical typeL: Horizontal type

Shaft seal methodO: OpenP: Sealed (gland

packing seal)* Mechanical seals,

vapor seals, and water seals can be produced.

Motor output (kW)Single-phase motors are appended with "A".(Example: 0.1 A)

OthersS: StandardX: Special

• 6-pole motor• Other special

speci�cations

* Gear ratio is indicatedin only in the caseof transmissionmethod M.

M10 : 1/10 M30 : 1/30 M15 : 1/15 M50 : 1/50 M20 : 1/20 CS8 : 1/8 CS15: 1/15 CS11: 1/11

TM_00115517_P01_P02_1412_1_1C M Y K

3-vane propellerStandard Speci�cations

Special Speci�cations

Paddles

Stabilizer

Spiral ribbon

Gate type

Anchor

Gate type vane(bobbin vane)

3-vane propeller(standard)

Paddle (4-45˚ paddle)


Stabilizer ring

Spiral ribbon

Anchor paddle

Gland packing seal

Agitation

Agitation

Agitation

Agitation

{

0 20 40 60 80 100 500 1000 1500Revolution speed (rpm)

Vane shape

Vane dia.Tank dia. >0.5 0.3 to 0.5 <0.3

Disk turbine

T-3A-4-vane paddle

2-vane paddle

Anchor spiral ribbon

Propeller

Low liquid viscosity High liquid viscosityOutput

kW15117.55.5

3.7

2.21.5

0.75

0.4

0.2

0.10.1 0.2 0.3 0.5 1 2 3 5 10 20 30 50 70 100

Agitated liquid volume m3 Agitated liquid volume m3

OutputkW

1511

7.55.5

3.7

2.21.5

0.75

0.4

0.2

0.10.1 0.2 0.3 0.5 1 2 3 5 10 20 30 50 70 100

3.7

2.21.5

0.75

0.4

0.2

0.1

A

B

C

Strongagitation

Mediumagitation

Weakagitation

Strongagitation

Mediumagitation

100 to 1000 mP•a

Weakagitation

1000 to 3000 mP•a

3 4

3-vane propeller

3-vane propeller(Marine type)

Marine typeThis 3-dimensionally twisted propeller is extremely ef�cient.It is used mostly in the 200 to 350 rpm medium rotationspeed range.

This axial �ow propeller is the most widely used to obtain a large circulation volume.

Disk turbine

Disk turbine(6-45˚ disk turbine)

6-45˚ disk turbineAxial �ow, radial �ow andshearing �ow that are used for every kind of application is uniformly obtained by thisturbine. The disk turbine is ideal for high-viscosity (5000 to 20000 mPa•s) liquid-liquid agitation and high concentration solid-liquid agitation.

4-45˚ paddleThis paddle produces a high agitation effect �ow by thecombined action of radial �ow and axial �ow. It is ideal foragitation of large volumes of comparatively high-viscosity liquids, (500 to 20000mpA•s) liquids at slow speeds, and is used atrotation speeds of vane outer peripheral speeds of 3m/sec orless.

2-45˚ paddleThis paddle is used for the same applications as the 4-45˚paddle except that it is used for bringing the effect of agitation closer to the inner wall of the tank depending on thecharacteristics of the liquid.

This horse show shaped vane matches the surface of tank bottoms. It can also be madeto user speci�cations forspecial applications.

This is used for slow agitationin large tanks.

Stabilizer ringThis is particularly effective for preventing vibration of the mounting agitation shaft whena longer than standardagitation shaft is required and agitation down to the bottom of the tank is required.

The inner screw stirs the liquid upwards while the outer ribbon pushed the liquid down toscrew a powerful vertical circulatory �ow. The spiralribbon is used for mixing of high-viscosity liquids, melting, and heat transfer.

Agitation Force Impeller

Motor Drive

Shaft Seal Unit

Agitation Force

Tank bottom bearings are also available

Foot bearing Simple type

4-45˚ paddle

Flow patterns

T-3A impeller

T-3A

T-3AThis propeller can be substituted for almost all 4-45˚ paddles. The same performance can be achieved by half the motor power. T-3A generates a more powerful axial �ow than the 4-45˚ paddle, and does not allow dead space even at large bottom clearances.

Model Selection

Strong Medium Weak

This area is aspecial agitation area. For details, contact your dealer.

0.1 0.2 0.3 0.5 1 2 3 5 10 20

How to interpret selection chartsFind the agitated volume on the horizontal axis, and read the required motor output on the vertical axis inside the agitation strength range on the line extending upwards from the horizontal axis.

(Example) When agitating non-viscous liquid of volume 3m3, (A) is strong agitation range, (B) the medium agitation range, and (C) the weak agitation range.

Open (standard)

Sealed (gland packing seal)100˚C, 0.1 MPa or less* At 100˚C or higher, a water jacket is provided. (custom order product)

Special (mechanical seal)Simple mechanical seal250˚C, F.V to ATMDouble mechanical seal250˚C, 0.8 to 2 MPa or lessDry mechanical seal150˚C, 0.2 MPa or less

* Vapor seals and water seals can also be produced. 100˚C, 1 kPa or less (External intrusion of dust and vapor from the tank at

low temperatures and pressures can be prevented.)

Mechanical seal

Vapor (oil) seal

When selecting the type of agitator and motor drive, it is important that you fully understand speci�cations and operating conditions.

Your dealer will select the ideal agitator model matched to your particular requirements for you. Check each of the following items, �ll in the table on the rear of this catalog, and inform your dealer of this information.

Check your particular agitation requirements and physical conditions of the liquid you are going to agitate before checking the agitation force.

Con�rm that the motor drive matches the volume of liquid.

Select a seal unit that matches the operating conditions. For horizontal agitators, select the glandpacking seal or mechanical seal.

• Uniform mixing and agitation of high-viscosity liquids

• Uniform mixing of insoluble liquids having different phases

• Agitation such as mixing, dispersion and melting of liquids containing high-viscosity liquids, high speci�c gravity liquids and solid particles having a large

grain size

• Gas absorption/reaction/culture agitation of medium- to high-

viscosity liquids

• Uniform heating of high-viscosity liquids inside tanks

• When fast agitation of medium- to low-viscosity liquids

• Short-term agitation of soluble liquids• Mixtures of medium- to high-viscosity

liquids that may be agitated gently

• Agitation such as mixing, dispersion and melting of solid particles

Particle true speci�c gravity:2.3 or lessParticle grain size:200 mesh or lessParticle concentration:10 to 20 wt% or less

• Gas absorption/reaction/culture agitation of low-viscosity liquids

• Uniform heating of medium- to low- viscosity liquids inside tanks

• Gentle agitation of low- viscosity soluble liquids• Storage tank for low- viscosity products

{• Prevention of precipitation of solid

particlesParticle true speci�c gravity:2.3Particle grain size:200 mesh (74μm)Particle concentration: 10 wt% or less

• Simple temperature regulation, etc.

• In the case of soluble liquid-liquid agitation• Specific gravity range of liquid is 1.0 to 1.05.

• When the weak agitation range is for gentle agitation.• Agitation time set between 15 to 25 minutes• Cylindrical agitation tank with tank diameter (D)/height (H) ratio (H/D) within range 0.8 to 1.1

Selection of the optimum impellershape is vital. (Your dealer will select the impeller matched toyour speci�cations.)

TM_00115517_P03_P04_1412_1_1C M Y K

3-vane propellerStandard Speci�cations

Special Speci�cations

Paddles

Stabilizer

Spiral ribbon

Gate type

Anchor

Gate type vane(bobbin vane)

3-vane propeller(standard)



Stabilizer ring

Spiral ribbon

Anchor paddle

Gland packing seal

Agitation

Agitation

Agitation

Agitation

{

0 20 40 60 80 100 500 1000 1500Revolution speed (rpm)

Vane shape

Vane dia.Tank dia. >0.5 0.3 to 0.5 <0.3

Disk turbine

T-3A-4-vane paddle

2-vane paddle

Anchor spiral ribbon

Propeller

Low liquid viscosity High liquid viscosityOutput

kW1511

7.55.5

3.7

2.21.5

0.75

0.4

0.2

0.10.1 0.2 0.3 0.5 1 2 3 5 10 20 30 50 70 100

Agitated liquid volume m3 Agitated liquid volume m3

OutputkW

1511

7.55.5

3.7

2.21.5

0.75

0.4

0.2

0.10.1 0.2 0.3 0.5 1 2 3 5 10 20 30 50 70 100

3.7

2.21.5

0.75

0.4

0.2

0.1

A

B

C

Strongagitation

Mediumagitation

Weakagitation

Strongagitation

Mediumagitation

100 to 1000 mP•a

Weakagitation

1000 to 3000 mP•a

3 4

3-vane propeller

3-vane propeller(Marine type)

Marine typeThis 3-dimensionally twisted propeller is extremely ef�cient.It is used mostly in the 200 to 350 rpm medium rotationspeed range.

This axial �ow propeller is the most widely used to obtain a large circulation volume.

Disk turbine

Disk turbine(6-45˚ disk turbine)

6-45˚ disk turbineAxial �ow, radial �ow andshearing �ow that are used for every kind of application is uniformly obtained by thisturbine. The disk turbine is ideal for high-viscosity (5000 to 20000 mPa•s) liquid-liquid agitation and high concentration solid-liquid agitation.

4-45˚ paddleThis paddle produces a high agitation effect �ow by thecombined action of radial �ow and axial �ow. It is ideal foragitation of large volumes of comparatively high-viscosity liquids, (500 to 20000mpA•s) liquids at slow speeds, and is used atrotation speeds of vane outer peripheral speeds of 3m/sec orless.

2-45˚ paddleThis paddle is used for the same applications as the 4-45˚paddle except that it is used for bringing the effect of agitation closer to the inner wall of the tank depending on thecharacteristics of the liquid.

This horse show shaped vane matches the surface of tank bottoms. It can also be madeto user speci�cations forspecial applications.

This is used for slow agitationin large tanks.

Stabilizer ringThis is particularly effective for preventing vibration of the mounting agitation shaft whena longer than standardagitation shaft is required and agitation down to the bottom of the tank is required.

The inner screw stirs the liquid upwards while the outer ribbon pushed the liquid down toscrew a powerful vertical circulatory �ow. The spiralribbon is used for mixing of high-viscosity liquids, melting, and heat transfer.

Agitation Force Impeller

Motor Drive

Shaft Seal Unit

Agitation Force

Tank bottom bearings are also available

Foot bearing Simple type

4-45˚ paddle

Flow patterns

T-3A impeller

T-3A

T-3AThis propeller can be substituted for almost all 4-45˚ paddles. The same performance can be achieved by half the motor power. T-3A generates a more powerful axial �ow than the 4-45˚ paddle, and does not allow dead space even at large bottom clearances.

Model Selection

Strong Medium Weak

This area is aspecial agitation area. For details, contact your dealer.

0.1 0.2 0.3 0.5 1 2 3 5 10 20

How to interpret selection chartsFind the agitated volume on the horizontal axis, and read the required motor output on the vertical axis inside the agitation strength range on the line extending upwards from the horizontal axis.

(Example) When agitating non-viscous liquid of volume 3m3, (A) is strong agitation range, (B) the medium agitation range, and (C) the weak agitation range.

Open (standard)

Sealed (gland packing seal)100˚C, 0.1 MPa or less* At 100˚C or higher, a water jacket is provided. (custom order product)

Special (mechanical seal)Simple mechanical seal250˚C, F.V to ATMDouble mechanical seal250˚C, 0.8 to 2 MPa or lessDry mechanical seal150˚C, 0.2 MPa or less

* Vapor seals and water seals can also be produced. 100˚C, 1 kPa or less (External intrusion of dust and vapor from the tank at

low temperatures and pressures can be prevented.)

Mechanical seal

Vapor (oil) seal

When selecting the type of agitator and motor drive, it is important that you fully understand speci�cations and operating conditions.

Your dealer will select the ideal agitator model matched to your particular requirements for you. Check each of the following items, �ll in the table on the rear of this catalog, and inform your dealer of this information.

Check your particular agitation requirements and physical conditions of the liquid you are going to agitate before checking the agitation force.

Con�rm that the motor drive matches the volume of liquid.

Select a seal unit that matches the operating conditions. For horizontal agitators, select the glandpacking seal or mechanical seal.

• Uniform mixing and agitation of high-viscosity liquids

• Uniform mixing of insoluble liquids having different phases

• Agitation such as mixing, dispersion and melting of liquids containing high-viscosity liquids, high speci�c gravity liquids and solid particles having a large

grain size

• Gas absorption/reaction/culture agitation of medium- to high-

viscosity liquids

• Uniform heating of high-viscosity liquids inside tanks

• When fast agitation of medium- to low-viscosity liquids

• Short-term agitation of soluble liquids• Mixtures of medium- to high-viscosity

liquids that may be agitated gently

• Agitation such as mixing, dispersion and melting of solid particles

Particle true speci�c gravity:2.3 or lessParticle grain size:200 mesh or lessParticle concentration:10 to 20 wt% or less

• Gas absorption/reaction/culture agitation of low-viscosity liquids

• Uniform heating of medium- to low- viscosity liquids inside tanks

• Gentle agitation of low- viscosity soluble liquids• Storage tank for low- viscosity products

{• Prevention of precipitation of solid

particlesParticle true speci�c gravity:2.3Particle grain size:200 mesh (74μm)Particle concentration: 10 wt% or less

• Simple temperature regulation, etc.

• In the case of soluble liquid-liquid agitation• Specific gravity range of liquid is 1.0 to 1.05.

• When the weak agitation range is for gentle agitation.• Agitation time set between 15 to 25 minutes• Cylindrical agitation tank with tank diameter (D)/height (H) ratio (H/D) within range 0.8 to 1.1

Selection of the optimum impellershape is vital. (Your dealer will select the impeller matched toyour speci�cations.)

TM_00115517_P03_P04_1412_1_1C M Y K

Vertical type

5 6

GTOFor medium speeds (gear reducer type)As this vertical agitator is a high-precision gear unit, it emits little sound during operation, is compact, and demonstrates high performance.

BTOFor medium speeds (belt reducer type)As this compact and easy-to-maintain model is designed in a simple mechanism, it will hardly malfunction, and will emit little sound during operation. At motor drives of 5.5 kW or more, shaft diameter, length and other mechanical parts can be set to match the operating environment.

M TFor medium/low speeds (geared motor reducer type)This model emits little sound during operationas it is a high-precision gear unit. The desired revolution speed can also be selectedaccording to applications such as the agitationof viscous liquids.

D

H

1 to

2d

1 to

2d

1 to

2d

1 to 1.5d

(0.2 to 0.25D)

d

D

H

1 to

2d

1 to

2d

1 to

2d

0.08D to 0.1D

Baf�e plates 3 or 4 locations

L

d

D

H

1 to

2d

1 to

2d

1 to

2d

1 to 1.5d

(0.2 to 0.25D)

Corner0.07 to 0.1D

d

External Dimensions

External Dimensions

External Dimensions

Mounting procedure for vertical agitators

In this example, the agitator is mounted eccentrically in the tank to obtain vertical convection and turbulence in the direction of axial �ow.

In this example, the agitator is mounted at the center of the tank,and baf�e plates are attached on the inner wall of the tank to createvertical convection and turbulence.

In this example, the agitator is mounted eccentrically in a �at bottom tank. Corners are provided at the bottom of the tank to prevent settling and retention when there is a particularly large difference inspeci�c gravities in melting slurry, mixing, and liquid-liquid agitation.

Speci�cation Dimensions

ModelMotorOutput

Max. Agitation CapacityDilutedLiquids

MediumViscosity Liquid

Approx. Weight

W/ motor

０.１０.２０.４０.７５１.５２.２３.７５.５

８００１０００１２００１４００１６００１８００

２４kW

Main BodyStandardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft

２５０２００

２５

２０００２２００

２２３２３２４０５０

１６１３

２２３００３７３５０ 47

３０００１００００１５００５０００８００２５００４００１２００

１２０００３００００８０００２００００５０００１５０００

２００６００

４００ 76４５０ 87５００ 143

２６９１００A１００A１２５A１２５A１５０A１５０A２００A２５０A

１５０２７０２１０１７５１９４２６９１５０２７０２１０１７５１９４３４７１５０３６０２５０２１０２３４３４７１５０３６０２５０２１０２３４４２８２１０４２０２８０２４０２３４４２８２１０４２０２８０２４０２３４５０８２１０４７０３３０２９０２３４６５８２８５５４０４００３５５２５６ 285

２００１６０

２５０３００３５０４００４５０480

50Hz 60Hz

RevolutionSpeed (min-1) 1st stage

dia.2nd stage

dia.mm mm

3-vane propeller

L L kg(A) (B)(H)

２９５(4-pole motor)１９０

(6-pole motor)

３５０(4-pole motor)２３０

(6-pole motor)

Mounting FlangeNominal dia.

JIS-10Kmm mm mm PCS

O.D.(OD)

Pitch(PCD)

Hole(Z) (N)

BTO - 0.1BTO - 0.2BTO - 0.4BTO - 0.75BTO - 1.5BTO - 2.2BTO - 3.7BTO - 5.5

* Up to 0.75 kW, 1 stage, 3-vane propeller is standard* The shape varies slightly at 5.5 kW or more.

• The 2-stage, 3-vane propeller is optional.• Idling is prohibited.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type.

JIS10K100AJIS10K125AJIS10K150A

α45˚45˚45˚

E131618

JIS10K200A 45˚ 22JIS10K250A 30˚ 25

A B

fOD

fd

fD

Sealed type(gland packing seal)

H

L

E

Mounting seat

N-fZα

PCD

0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameterand propeller diameter dimensions increase by one more rank.

５５０


ModelMotorOutput

Main Body Max. Agitation CapacityDilutedLiquids


Approx. Weight

W/ motor

０.０６５０.１０.１０.２０.２０.４０.７５

６００８００８００１０００１０００１２００

kW

Standardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft

２００１６０

１４００

１６１６２２２２

１３１３

１３２００２５０

４００１２００４００１２００２００６００２００６００

１５００５０００８００２５００

１００４００

２５０３００３５０

３５２１００A１００A１００A１００A１００A１２５A１２５A

７３７０２１０１７５１９４３６７７３７０２１０１７５１９４３２９７３７０２１０１７５１９４４０４７３７０２１０１７５１９４３６３７３７０２１０１７５１９４４２６９８９３２５０２１０２３４449 ９８９３２５０２１０２３４

１６０１２０

１６０２００２００２５０３００

50Hz 60Hz


dia2nd stage

dia.mm mm

3-vane propeller

L L kg(A) (B)(H)

295(4-pole motor)

190(6-pole motor)

350(4-pole motor)

230(6-pole motor)


JIS-10Kmm mm mm PCS

O.D.(OD)

Pitch(PCD)

Hole(Z) (N)

0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameter andpropeller diameter dimensions increase by one more rank.

* Dimension H varies slightly according to motor manufacturer.

* Please contact us for details.


• The 2-stage, 3-vane propeller is optional.• Idling is prohibited.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. However, the single phase motor 0.065A and 0.1A is the

totally enclosed indoor type, and 0.2A is the totally enclosed fan cooled indoor type.

GTO-0.065AGTO-0.1AGTO-0.1GTO-0.2AGTO-0.2GTO-0.4GTO-0.75

A B

Mounting seatfOD

fd

fD


N-fZα

H

L

E

PCD


α45˚45˚45˚

E131618

１６１８１７２０１９３０39


ModelMotor/Gear ReducerOutput


JIS-10K

Max. Agitation CapacityDilutedLiquids


Approx. Weight

W/ motor

０.１

• Contact your dealer when idling may occur.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. However, the single phase motor

0.1A is the totally enclosed indoor type, and 0.2A is the totally enclosed fan cooled indoor type.

１／１０２００kW

Gear Ratioi

Standardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft Main Body

１５０１８０１／１５２５０１００１２０１／２０

１０００１６

３００

４１００A ２１０１７５１９

７５９０１／３０３５０

３００７００

５０６０１／５０５００３０３６１／１０２００１５０１８０１／１５２５０１６９１００１２０１／２０３００４６８２９９

４１０２４１

７５９０１／３０３５０５０６０１／５０５００３０３６

０.２

１／１０２５０１５０１８０１／１５３００１００１２０１／２０

１２００２２

１２００２２

３５０

４１２５A ２５０２１０２３

７５９０１／３０４５０５０６０１／５０

１０００１６

５５０

４１００A ２１０１７５１９

３０３６１／１０２５０１５０１８０１／１５３００５０２３３３１６９

４８０

４５１２８２

２９６１８４

１００１２０

０.４

１／２０３５０

１２００２５００

６００１３００

７５９０１／３０４５０

４１２５A１８４２５０２１０２３

５０６０１／５０５５０３０３６１／１０３５０１５０１８０

０.７５

１／１５４００１００１２０１／２０４５０７５９０１／３０５５０

４１５０A ２８０２４０２３

５０６０１／５０６５０６１８３８７

５５８３７４

５３１３４７

６44 413 ２５００５０００

３０３６１／１０４００２３１１５０１８０１／１５５００

３２１５００１００１２０

１／２０６００７５９０

５０Hz ６０Hz

Revolution Speed (min-1)

Dia. (Dia. D)mm mm mm mm PCS

2-vane Paddle2-stage O.D.

(OD)Pitch(PCD)

Hole(Z) (N)

L L kg

M□T□ - 0.1A

M□T□ - 0.2A

M□T□ - 0.4

M□T□ - 0.1

M□T□ - 0.2

M□T□ - 0.75

(H) (A) (B)

A

B

fODfd

fD


H

L

E

Mounting seat

N-fZα

PCD


α45˚45˚45˚

E131618

* Can be made up to 0.75 kW1/20.* Dimensions H and A vary slightly according

to motor manufacturer.* Paddle, 3-vane propeller and turbine

impellers are also available.* Agitators having a gear ratio other than the

above are also available.

１８１８１８１９２０２１２１２２２２２４１９１９２０２７２９２２２２２３３０３２３３３３３３５１５３596061

＊ In case of propeller

C1TFor medium/low speeds (cycloid reducer type)(for processes)

This model has been designed to be rigid for use in processes. Select the model to suit your particular requirements. A high-precisioncyclo, Bayel-Cyclo, ring cone, and other adjustable speed reducers can also bemounted. A mechanical seal type is also available.

C2TFor medium/low speeds (cycloid reducer type)(for water treatment and general use)

This model is designed to have highlyapplicable functions. Select the model to suit your particular requirements. A high-precision cyclo, Bayel-Cyclo and other adjustable speed reducers can also be mounted.

GTO

M T

BTO

C1T

C2T

TM_00115517_P05_P06_1412_1_1C M Y K

Portable Type

Horizontal Type

External Dimensions

External Dimensions

7 8

GSMounting procedure for portable agitators

d

1 to

2d

1 to

2d

1 to

2d

1 to

2dd

5 to 20˚

0 to 20˚

0 to 20˚

The agitator is clamped to the support base or top edge of the tank. Though the shaft is mounted at an angle with respect to the horizontal and vertical directions, it should be �xed so that its vanes do not exceed beyond the center of the tank. When there is piping in the tank, the agitator must be mounted so that the vanes are positioned at the center of the tank. Also, mount so that the top and bottom propellers become multiples ofthe number of vanes.

M S

For medium speeds (gear reducer type)As this portable agitator is a high-precisiongear unit, it emits little sound during operation,is compact, and demonstrates high performance. This handy multi-type model can also be used as a vertical type (GT model) ifthe clamp is removed and a �ange isattached.

For medium/low speeds(geared motor reducer type)This model emits little sound during operation as it is a high-precision gear unit. The desired revolution speed can also be selected according to applications such as theagitation of viscous liquids. This handy multi-type model can also be used as a verticaltype (MT model) if the clamp is removed anda �ange is attached.

M S

BLFor medium speeds (belt reducer type)

Features1. V-belt drive results in low noise and little

vibration.2. Small drive power can also be applied to

agitation of large volumes. Considerable agitation effect and economical

3. Outstanding gland seal minimizes leaks. Models using mechanical seal systems are also available for pressure- and corrosion-

resistant applications.

Speci�cation Dimensions0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameter andpropeller diameter speci�cations increase by one more rank.

ModelMotor

OutputPart Dimensions Max. Agitation Capacity

DilutedLiquids


Approx. Weight

W/ motor

０.０６５

• The 2-stage, 3-vane propeller is optional.• Idling is prohibited.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SSU316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. However, the single phase motor 0.065A and 0.1A is the totally enclosed indoor type, and 0.2A is the totally enclosed fan cooled indoor type.

０.１０.１０.２０.２０.４０.７５

１００６００８００８００１０００１０００１２００

kWVoltage

V

Standardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft

１００２００１６０

２００

１４００

１６１６２２２２

１３１３

１３２００１００２５０

４００１２００４００１２００２００６００２００６００

１５００５０００８００２５００

１００４００

２００２５０２００３００２００３５０

３２５１２７５０ -４１０１３８４７３４０１２７５０ -４１０１３８４７３０２１２７５０ -４１０１３８４７３７７１２７５０ -４１０１３８４７３３６１２７５０ -４１０１３８４７３９９１６８５０２３１２８３８４７422 １６８５０２３１２８３８４７

１６０１２０

１６０２００２００２５０３００

５０Hz ６０Hz


dia2nd stage

dia.mm mm mm mm mm mm

3-vane propeller

L L kgGS - 0.065AGS - 0.1AGS - 0.1GS - 0.2AGS - 0.2GS - 0.4GS - 0.75

(A) (B) (C) (H) (I) (E) (U)

２９５(4-pole motor)１９０

(6-pole motor)

３５０(4-pole motor)２３０

(6-pole motor)

１３１５１４１７１６２２31

* The 1-stage, 3-vane propeller is standard.* Dimension A varies slightly accordingly to motor manufacturer.

U

U

GS2.2

A

B

EI

C

φd

φD

H

When outdoor coveris attached

L

ModelMotor/Gear ReducerOutput

Part Dimensions Max. Agitation CapacityDilutedLiquids


Approx. Weight

W/ motor

• Contact your dealer when idling may occur.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SSU316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. However, the single phase motor 0.1A is the totally

enclosed indoor type, and 0.2A is the totally enclosed fan cooled indoor type.

０.１

０.２

０.４

０.７５

１／１０

１０００

kWGear ratio

i

Standardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft

１／１５１／２０１／３０１／５０１／１０１／１５１／２０１／３０１／５０１／１０１／１５１／２０１／３０１／５０１／１０１／１５１／２０１／３０１／５０１／１０１／１５１／２０１／３０１／５０１／１０１／１５１／２０

１６

１０００１６

１２００２２

１２００２２

１５００３２

３００７００

６００１３００

１２００２５００

２５００５０００

３８３

４４１１４２５０２５９８３８４７

１４２５０２５９８３８４７

１５７７４１４１１２６６７２

１５７７４１４１１２６６７２

１８７７４４３１２３６６１４４

４２４

４５３

５３１

５７４

600

４７５

５０４

２５０２００１５０１８０

１００１２０７５９０５０６０３０３６１５０１８０１００１２０７５９０５０６０３０３６１５０１８０１００１２０７５９０５０６０３０３６１５０１８０１００１２０７５９０５０６０３０３６１５０１８０１００１２０７５９０

１５０１８０１００１２０７５９０

５０６０３０３６

３００３５０５００

５００

２００２５０

２５０

３００３５０

２５０３００３５０

３５０４００

４００５００６００

３００３５０４５０５５０

４５０

４５０

５５０

５５０６５０

50Hz 60Hz

RevolutionSpeed (min-1)

Diameter (dia.D)mm mm mm mm mm

2-vane paddle2 stages

L L kg

M□S - 0.1A

M□S - 0.1

M□S - 0.2A

M□S - 0.2

M□S - 0.4

M□S - 0.75

(A) (B) (C) (H) (I) (E) (U)


１５１５１５１６１７１８１８１８１９２０１６１６１７２２２４１９１９２０２５２７２７２７２７４４４５495152

* Can be made up to 0.75 kW1/20.* Dimension A varies slightly according to motor

manufacturer.* Paddle, 3-vane propeller and turbine impellers

are also available.* Agitators having a gear ratio other than the

above are also available.

U

U

MS0.4: and onlyMS0.75: all models

301／ 50

1／

A

B

E

I

C

φd

φD

H

L


GS

BL

TM_00115517_P11_P12_1412_1_1C M Y K

Agitator AppliedDevices


Agitator Mounting Bases

Metering Pumps

PeripheralDevices Various Devices for Supporting Agitator Applications

Safety Pumps

SP60-P Series

A

B

C

D

H

9 10

FeaturesIn addition to standalone use, this tank can be used in various combinations for various applications: with a metering pump, with an agitator, or with a metering pump and agitator.An extensive range of range sizes are available: 50, 100, 200, 300, 500 and 1000 liters.

FeaturesCompact. Ideal for small volumesCombining with Solution Tank fully demonstrates performance.

External DimensionsModel H

Standard Dimensions

700 to 1030930 to 1310

1200 to 1650

A

425370

560

PGS-1PGS-2PGS-3

B

400350

470

C

680600

800

D

363313

420

LoadLimits

50 kg30 kg

85 kg880 to 1330950 to 1450

1500 to 2250605475

700

PHS-1PHS-2PHS-3

365340

650515480

1000305290

52550 kg30 kg

75 kg950 to 1430

1070 to 15701500 to 2250

645475

700

PHC-1PHC-2PHC-3

490340

650690480

1000415290

52550 kg30 kg

75 kg* Shapes of bases may vary slightly from the photographs.* Dimensions can be changed by user request.

Base for portable agitatorPGS model

A wide range of stands portable agitatorsis available. When ordering, notify your dealer of size, base height, stroke andtank size.• Bases with hydraulically driven, motor-

driven or pneumatically drivenautomatic elevator can also be made.

• For details on cantilever type and gate type elevated bases for verticalagitators, consult with your dealer.

Various lift-basesPHS model

H

C B A

D

PHC model

H

C BA

D

Chemical dissolving tank with metering pump and base for agitator

Solution Tank

Agitator for Solution Tank

Solenoid-Driven Metering Pump PZ series

FeaturesStrong acids and alkalis through to solventsPumps are made in two types of main materials, polypropylene and stainless steel,accommodating a wide range of chemicals.Thermal protectorThe thermal protector prevents motor seizure caused by overloads, eliminating the need forthe troublesome replacement of fuses and repair.* Excluding SP40-P and MSP seriesMotor can be selected for pressure-resistant, explosion-proof applications.Flowrate 2-stage selector switchThe discharge volume can be selected by one-touch switch operation.* SP40-P series and SP40-S series (excluding pressure-resistant, explosion-proof

speci�cations)Lightweight, compact designLittle residual liquid in containerImpeller has been designed to position as low as possible.

Applications• Transfer and sub-division of

liquids in chemical plants and chemical warehouses

• Hygienic feeding of drinks and brewed liquids in foodprocessing plants

• Transfer and replenishment of chemicals in steelworks, and water and waste water treatment facilities/ water works facilities

• Replenishment of chemicals in laboratories and hospitals

• Transfer of sodium hypochloritein swimming pools

• Transfer of sodium hypochloritein simple water works facilities

• Transfer of various industrial waste liquids

MSP SeriesSmall, lightweight type having pump diameter of 32 cm for insertion in oil cans and polyethylene cans

• Reliable metering performance and repeatability at alow price

• Delivers stable discharge volume hardly effected bythe discharge-side pressure.

• Capable of microscopic amounts, high-pressureinjection.

• Capable of racingProduct variations ranging from 30 mL/min to 43 L/min* in capacity *Per pump head

FeaturesWide voltage range power supply (AC90V to AC264V)

Outdoor speci�cationsEquivalent to IEC speci�cations; IP95Dust-proof, jet stream-proof structure

Simple structureReduced number of parts allows easy maintenance.

ON-OFF control is possible by the external operationsignal. (Model PZL)

Intelligent PZi series models are also available:PZi8: I/O signal control typePZi4: Input signal control type

Speci�cations and Performance TableSpeci�cation Model

Maximum discharge volume L/H (mL/min)Maximum discharge pressure bar (MPa)Stroke frequency (pulses/min)

Connection PVC braided hoseaperture (mm) PE tubeWeight (kg)

PZ -31 PZ -61 PZ -12 1.8 (30) 3.6 (60) 6.0 (100) 10 (1.0) 8 (0.8) 4 (0.4) Max. 300: Adjustable from 15 to 300 dia.4 x dia.9 dia.6 x dia.11 dia.6 x dia.11 dia.6 x dia.9 or 1/4" x 3/8" 1.7 1.7 1.7

Direct-Drive Diaphragm Metering Pump

Model

１／８

１／１５

１／８

１／１５

１／８

１／１５

１／８

１／１５

１／８

１／１５

１／１１

１／５

２１９

１１７

２１９

１１７

２１９

１１７

２１９

１１７

２１９

１１７

１５９

１１７

CS８TV‐０.０４-１-S

CS１５TV‐０.０４-１-S

CS８TV‐０.０６-１-S

CS１５TV‐０.０６-１-S

CS８TV‐０.０９-１-S

CS１５TV‐０.０９-１-S

CS８TV‐０.１-１-S

CS１５TV‐０.１-１-S

CS８TV‐０.２-１-S

CS１５TV‐０.２-１-S

CS１１TV-０.４

CS１５TV-０.４

JIS５K６５A

JIS５K６５A

JIS５K６５A

JIS１０K６５A

JIS１０K６５A

JIS１０K６５A

４０

６０

９０

１００

２００

０.４

４５０

６００

７００

７００

８００

１２００

２

２

２

２

２

２

１５０

１５０

１８０

２００

２００

３００

２２０

３００

２６０

３８０

３８０

４５０

１３．０

１３．０

１４．０

１４．０

１４．０

１４．０

１６．０

１６．０

１８．０

１８．０

２３.０

２３.０

１６

１６

１６

１６

１６

２２

５０

１００

２００

３００

５００

１０００

１６４

１６４

１６４

１７８

２２０

２４５

７１２

８６２

９６２

９７６

１１１８

１５４３

AB

C

D

E

１８1

96.7

１８1

96.7

１８1

96.7

１８1

96.7

１８1

96.7

１３２

９６.７

CS

Motor

Output

(W)

Body

Hight (mm)

A

Main Body

Hight (mm)

B

GearReducer

GearRatio

Revolution

speed (rpm)

50 Hz 60 Hz

Agitation Shaft Applicable

Tank

Approx.Weight

Impeller(2-Vane Paddle)

W/ motor

(kg)Nominal Dia.Number(L)

Mounting FlangeDia. (mm)Dia. (mm)Length (mm)

EDC

• Idling is prohibited.

• The standard paint color is Munsell 10GY-6/6.

• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.

• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type.

TM_00115517_P13_P14_1412_1_1C M Y K

Agitator AppliedDevices


Agitator Mounting Bases

Metering Pumps

PeripheralDevices Various Devices for Supporting Agitator Applications

Safety Pumps

SP60-P Series

A

B

C

D

H

9 10

FeaturesIn addition to standalone use, this tank can be used in various combinations for various applications: with a metering pump, with an agitator, or with a metering pump and agitator.An extensive range of range sizes are available: 50, 100, 200, 300, 500 and 1000 liters.

FeaturesCompact. Ideal for small volumesCombining with Solution Tank fully demonstrates performance.

External DimensionsModel H

Standard Dimensions

700 to 1030930 to 13101200 to 1650

A

425370

560

PGS-1PGS-2PGS-3

B

400350

470

C

680600

800

D

363313

420

LoadLimits

50 kg30 kg

85 kg880 to 1330950 to 14501500 to 2250

605475

700

PHS-1PHS-2PHS-3

365340

650515480

1000305290

52550 kg30 kg

75 kg950 to 14301070 to 15701500 to 2250

645475

700

PHC-1PHC-2PHC-3

490340

650690480

1000415290

52550 kg30 kg

75 kg* Shapes of bases may vary slightly from the photographs.* Dimensions can be changed by user request.

Base for portable agitatorPGS model

A wide range of stands portable agitatorsis available. When ordering, notify your dealer of size, base height, stroke andtank size.• Bases with hydraulically driven, motor-

driven or pneumatically drivenautomatic elevator can also be made.

• For details on cantilever type and gate type elevated bases for verticalagitators, consult with your dealer.

Various lift-basesPHS model

H

C B A

D

PHC model

H

C BA

D

Chemical dissolving tank with metering pump and base for agitator

Solution Tank

Agitator for Solution Tank

Solenoid-Driven Metering Pump PZ series

FeaturesStrong acids and alkalis through to solventsPumps are made in two types of main materials, polypropylene and stainless steel,accommodating a wide range of chemicals.Thermal protectorThe thermal protector prevents motor seizure caused by overloads, eliminating the need forthe troublesome replacement of fuses and repair.* Excluding SP40-P and MSP seriesMotor can be selected for pressure-resistant, explosion-proof applications.Flowrate 2-stage selector switchThe discharge volume can be selected by one-touch switch operation.* SP40-P series and SP40-S series (excluding pressure-resistant, explosion-proof

speci�cations)Lightweight, compact designLittle residual liquid in containerImpeller has been designed to position as low as possible.

Applications• Transfer and sub-division of

liquids in chemical plants and chemical warehouses

• Hygienic feeding of drinks and brewed liquids in foodprocessing plants

• Transfer and replenishment of chemicals in steelworks, and water and waste water treatment facilities/ water works facilities

• Replenishment of chemicals in laboratories and hospitals

• Transfer of sodium hypochloritein swimming pools

• Transfer of sodium hypochloritein simple water works facilities

• Transfer of various industrial waste liquids

MSP SeriesSmall, lightweight type having pump diameter of 32 cm for insertion in oil cans and polyethylene cans

• Reliable metering performance and repeatability at alow price

• Delivers stable discharge volume hardly effected bythe discharge-side pressure.

• Capable of microscopic amounts, high-pressureinjection.

• Capable of racingProduct variations ranging from 30 mL/min to 43 L/min* in capacity *Per pump head

FeaturesWide voltage range power supply (AC90V to AC264V)

Outdoor speci�cationsEquivalent to IEC speci�cations; IP95Dust-proof, jet stream-proof structure

Simple structureReduced number of parts allows easy maintenance.

ON-OFF control is possible by the external operationsignal. (Model PZL)

Intelligent PZi series models are also available:PZi8: I/O signal control typePZi4: Input signal control type

Speci�cations and Performance TableSpeci�cation Model

Maximum discharge volume L/H (mL/min)Maximum discharge pressure bar (MPa)Stroke frequency (pulses/min)

Connection PVC braided hoseaperture (mm) PE tubeWeight (kg)

PZ -31 PZ -61 PZ -12 1.8 (30) 3.6 (60) 6.0 (100) 10 (1.0) 8 (0.8) 4 (0.4) Max. 300: Adjustable from 15 to 300 dia.4 x dia.9 dia.6 x dia.11 dia.6 x dia.11 dia.6 x dia.9 or 1/4" x 3/8" 1.7 1.7 1.7

Direct-Drive Diaphragm Metering Pump

Model

１／８

１／１５

１／８

１／１５

１／８

１／１５

１／８

１／１５

１／８

１／１５

１／１１

１／５

２１９

１１７

２１９

１１７

２１９

１１７

２１９

１１７

２１９

１１７

１５９

１１７

CS８TV‐０.０４-１-S

CS１５TV‐０.０４-１-S

CS８TV‐０.０６-１-S

CS１５TV‐０.０６-１-S

CS８TV‐０.０９-１-S

CS１５TV‐０.０９-１-S

CS８TV‐０.１-１-S

CS１５TV‐０.１-１-S

CS８TV‐０.２-１-S

CS１５TV‐０.２-１-S

CS１１TV-０.４

CS１５TV-０.４

JIS５K６５A

JIS５K６５A

JIS５K６５A

JIS１０K６５A

JIS１０K６５A

JIS１０K６５A

４０

６０

９０

１００

２００

０.４

４５０

６００

７００

７００

８００

１２００

２

２

２

２

２

２

１５０

１５０

１８０

２００

２００

３００

２２０

３００

２６０

３８０

３８０

４５０

１３．０

１３．０

１４．０

１４．０

１４．０

１４．０

１６．０

１６．０

１８．０

１８．０

２３.０

２３.０

１６

１６

１６

１６

１６

２２

５０

１００

２００

３００

５００

１０００

１６４

１６４

１６４

１７８

２２０

２４５

７１２

８６２

９６２

９７６

１１１８

１５４３

AB

C

D

E

１８1

96.7

１８1

96.7

１８1

96.7

１８1

96.7

１８1

96.7

１３２

９６.７

CS

Motor

Output

(W)

Body

Hight (mm)

A

Main Body

Hight (mm)

B

GearReducer

GearRatio

Revolution

speed (rpm)

50 Hz 60 Hz

Agitation Shaft Applicable

Tank

Approx.Weight

Impeller(2-Vane Paddle)

W/ motor

(kg)Nominal Dia.Number(L)

Mounting FlangeDia. (mm)Dia. (mm)Length (mm)

EDC

• Idling is prohibited.

• The standard paint color is Munsell 10GY-6/6.

• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.

• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type.

TM_00115517_P13_P14_1412_1_1C M Y K

General-purpose, Fixed Element Type

For reduced maintenance and energy and space savings in mixing processes

General-purpose, Removable Element Type

Sanitary Finishing Type

Corrosion-resistant Ceramic TypeCorrosion-resistant PVC Type

N10 Series N60 Series

N30 Series

N50 Series CSM Series

Both ends of the element are welded to the housing, with six elements provided for asingle module as standard. Select thenumber of modules according your speci�c requirements. This type is widely used for mixing, dispersion, neutralizing, extraction,and other general applications.

This type is used for the same applications as the N10 series. However, the element is only welded onto a ring so that it can be removed from the housing, making it ideal forprocesses that require disassembly for cleaning.

This sanitary type conforms to the same standards for sanitary piping used in food processing plants and supports CIP cleaning. The main unit and element can be easily removed and attached, making it ideal for processes that require disassembly for cleaning.

An element made of ceramic treated with special glaze is used. The surface of this element is smooth, making it dif�cult for scale to adhere and highly resistant to wear. Housings in various materials are alsoavailable so that you can select the material best suited to �uid characteristics. This typeis used both in water treatment processesand chemical processes.

On this static mixer, all of the element,housing and �ange are made of PVC. Thistype is used in applications where piping leading to and exiting the installation is madeof PVC, mainly in drinking water and purewater treatment. This type can also be madein impact-resistant PVC or heat-resistant PVC. It can also be reinforced with an FRP outer sheath.

Speci�cations

Shape and dimensions

Bottom shapeDimensions

Tank states

Tank

Liqu

idA

gita

tion

Properties

SolidsPowder

Liquid amount

Purpose

Time

Liquid (gas) contact materials

Motor

Square (V x H x H)Round (dia. x H)Base height

Flat bottomMirror bottom

Sealed

OpenPressure

TemperatureIndoor/outdoorLiquid nameViscositySpeci�c gravity

Liquid temperature

Solid particle nameSolid particle speci�c gravity

Solid particle diameter

Slurry concentration (%)

Spherical bottom

Precipitation speed (mm)Maximum/minimum

Decrease during agitationIdling

Uniform mixingDissolvingPrecipitation prevention

Heat transferReactionDispersionPolymerizationDepositionGas dispersion

OtherBatch type

Continuous access type

Flow speed

FlowrateRetention timeSelected materials at liquid contacting parts

Selected materials at gas contacting parts

Power supply (V, Hz)Motor type

Noritake Static Mixers with No Driven Parts

Static mixer and static mixer applied products are developed and manufactured by Noritake Company Limited. TACMINA sells these products on an engineering dealership basis.

Notify us of the following when inquiring about TACMINAagitators.

CAUTION● Do not use agitators that do not conform to

explosion-proof speci�cations in explosive or �ammable atmospheres. Doing so might result in explosion or �re.

● Before stopping agitators for inspection and maintenance, be sure to turn the power OFF.

Also, attach the "WORK IN PROGRESS. DO NOT TURN POWER ON" tag on the switch to prevent other personnel from turning the agitator ON by mistake.

● Never perform racing agitators on which racing is prohibited. Also, never perform racing agitators while the liquid level is rising above the

vanes. Doing so might damage the agitator.● Do not use agitators outside of speci�ed product

operating ranges. Doing so might result in electric shock.

www.tacmina.com

Agitators

EC-025 (5) 05

2015/1/ASS

C M Y K TM_00115517_H01_H04_1412_1_1

agitators brochure tacmina

Documents

heatresistant pvc

fixed element typefor

madein impactresistant

madeof pvc

sanitary type

various materials

sanitary piping

cip cleaning