NEW

807-0063_4p semoir NG+4:ribouleau 22/07/08 9:18 Page 1

MONOSEM

�

�

NGThe evolution of the NG Plus

Whether for intensive use, in difficult conditions or low till conditions, the NG Plus 3is known for being a heavy duty planterwhich is reliable with reinforced bearingsand interchangeable wearing parts.

The launching of the NG Plus 2 was markedby the introduction of the PRO wheel, a largediameter press wheel which improves plantemergence « the professional touch ».

Launched in the 70’s in the UnitedStates, the planting concept with a metering unit directly in line with the seed drop exists since 1989at MONOSEM. But since 20 years, the NG Plus has not ceased it’s evolution in order to meet with yourrequirements.

The metering unit is the major component of the Madded the operating comfort. Adjustments are mad

In 1989, MONOSEM revolutionized the precisionplanter by proposing planting with doublediscs «The American system of planting ».Together with a new pneumatic meteringsystem, the NG Plus was born.

NG Plus: The innovation

NG Plus 2: The PRO wheel

« Hose and cables perfectly in

The front facing of the metethe passage of the vacuum hmonitor and signal kit cables.

New front facing onunit

«Rapid declutching of a metering unit »

The new mechanical row cut-off systemwith lever is an economical solution for

declutching a metering unit(on option). For even morecomfort, an electro-magneticdeclutching system from thetractor cab is also available.

Row cut-off system (on option)

« Adjust clod removers or trash wheels in a flash »

The adjustment of the clod removers is precise (12 positions) and rapid due to theadjustment system with locking pins.

New clod remover bracket

NG Plus 3: Heavy duty planter

T h e p r e c i s i o n P l a n t e r s p e c i a l i s t

Adapt your accessories to planting conditionusing the rapidly interchangeable clo

removers / trash wheel

807-0063_4p semoir NG+4:ribouleau 22/07/08 9:18 Page 2

« Close the seed furrow in all conditions »

The new open rear press wheelunit gives better clearance in sticky conditions.

NG Plus 4: Plus the comfortthe MONOSEM planter. MONOSEM has conserved on the NG Plus 4 the best of the NG Plus units and hase made easier for a planter that is always perfectly adjusted enabling planting in optimal conditions.

ectly integrated »

e metering unit integratescuum hose and the seedcables.

g on the metering

«Always clearly visible »

The new depth adjustment index is visiblestraight away from the rear. It is weather-proof.

New open rear press wheel unit

Easier filling and emptying

The cover locks so will not close duringfilling, even in windy conditions.

« Simple and practical »

The new emptying trapdoor offers easier operating. Open thetrapdoor and it stays open enabling, with the emptying auger supplied as standardequipment, an even easier and more efficient emptying.

New depth index

The 1" wheels (instead of 2") are availableon option for improved pressing on hardground and / or low till conditions.

nditionsable clod h wheels.

The new off-set adjustments and the spacing of the 2 press wheels enableoptimal furrow closing no matter what the conditions (stones, trash, hardsoil, …).

807-0063_4p semoir NG+4:ribouleau 22/07/08 9:18 Page 3

MONOSEM

Ø 295 mm

COMPAGNIE COMMERCIALE RIBOULEAU8, rue de Berri - 75008 PARIS - FRANCE

Factories – Technique - Research - Information12, rue Edmond Ribouleau - 79240 LARGEASSE FranceTél. 00 33 5 49 81 50 00 - Fax 00 33 5 49 72 09 70

www.monosem.com

Distributor

Special pneumatic « low-till » planter NX with discs

All the data concerning the equipment, the general appearance, the weight and dimensions are current at the date of printing and vary according to countries.They may be modified without previous notice. This brochure cannot be considered as a binding document. Your Monosem partner will not hesitate in informingyou of any possible changes.

Réf.

: 902

02 E

N - 0

7/08

• Cr

éatio

n - R

éalis

atio

n : O

UEST

IMPR

ESSIO

NS E

urop

e - 0

5 49

65 0

1 75

PRO wheel « The professional

touch »

T h e p r e c i s i o n P l a n t e r s p e c i a l i s t

• Rests on the ground directly in line with the seed drop• Follows the ground contours• Exceptional performances in all conditions

• Large diameter PRO (Ø 295 mm) for perfect soil to seedcontact

• Pressure adjustment of the PRO wheel and integratedhooking up of the system

• Aluminium PRO wheel with stainless steel tyre andGreenflex scraper.

• Seed pressed into the soil directly on dropping

A designwhich makes all the

differenceIncomparable planting qualityOptimal depth control

Improved plant emergenceOptimal germinationBetter seed placement quality

Multi-purpose pneumatic planterwith NC shoes.

Mechanical planters for pelletedsugarbeet MECA V4

Special vegetable planter for mini-seeds MS

Cultivators

807-0063_4p semoir NG+4:ribouleau 22/07/08 9:18 Page 4