60& 3dqho 3urgxfwlrq
TRANSCRIPT
IDEAL of Clean Drinking Water
YSISERIM
Hi Tank
Various composite
material moldsSTS Tank
Zio Tank
HIGH QUALITY WATER TANK
SERIM MULSAN TRADING CO., LTD. has researched and made extraordinary efforts
to provide clean water for more than 15 years. We do our very best to contribute to
clean environments and works for improvement in national health.
SERIM MULSAN TRADING CO., LTD. is a specialized water treatment company focus-
ing on Hi Tank business, as well as water purifier and filter business. We will push
forward constantly for the realization of our business philosophy through the develop-
ment of new products and technology.
SERIM MULSAN TRADING CO., LTD. is taking on the challenge to become the world-
best specialized water treatment company with "be-the-top" spirit. Our company is
creating a new environmental culture through the combination of diverse technologies
and based on 'customer-first' philosophy.
Setting The World-ClassStandard of QualityAnd Technology
Contents 02 Introduction 10 Reinforcement System 12 Safety
14 Free Capacity Design 16 Compartment-type Hi Tank
20 Project Achievement of Hi-Tank 22 Global Network
HI TANK INTRODUCTION |
We deliver clean water as it is!
a Sheet Molding Compound (SMC) water tank
giving you 100% satisfaction in quality of hygiene,
water tightness, and durability.
In Singapore, one of the largest marketplaces for the SMC water tank business in the world,
very strict quality standards are applied to water tank products.
Only a few of world-renowned companies can pass the difficult tests given by the PSB on their technology
and quality. Hi Tank has acquired the PSB Certificate, which means Hi Tank demonstrates Korean technol-
ogy in water tanks to the world.
PSB Test for the Hydrostatic Pressure 2.4 Kgf/cm
(applied six times of hydrostatic pressure)
PSB Test for Distortion-resistance
(2mW X 2mL X 4mH)
PSB Test the Hydrostatic Pressure
Korea
Japan
United Kingdom
Japan
Japan
Japan
Country
4MH
4MH
4MH
3MH
3MH
3MH
Acquisition
SERIM
Bridgestone
Aquastow
Hitachi
Mitshibishi
Inax
CompanyCompany Country Acquisition
International Certificates
>ISO Certificate 9001 Product Liability Insurance
• Hi Tank enjoys the status of world-class quality and technology!
Hi Tank provides customers the most satisfaction through the highly accumulated
technique approved by the PSB Certificate of Singapore, the WRAS Certificate of
the UK. One-time installation brings you the lifetime satisfaction. We provide you
the best product in the light of your eyes and mind.
• PSB Certificate
A certificate issued by Productivity Standard Board (PSB) of Singapore.
The PSB quality standards are recognized internationally as the most authoritative
one among the international certificates related to water tank businesses. Specifi-
cally, these standards state that there shall not be any fine cracks in the panels of
a tank even when six times higher pressure of the hydrostatic pressure applied to
the panels. Therefore, this certificate guarantees the technology and quality of a
company that has passed the PSB test.PSB (Productivity Standard Board)
The WRAS Certificate
HI TANK INTRODUCTION |
Hi Tank pursues an optimal system through quality management with strict design standards and reliable structural stress analysis.
A critical aspect in structural ananlysis is the design according to safety factor at a threshold level.
Serim’s expertise lies in the design of optimal safety factor considering the expected external force
based on the physical properties of the SMC material after long-term use of more than 15 years.
High Quality
Free CapcityDesign
1.0~5.0m in height 1 ~ 3,000 tons (A tank with a capacity
exceeding 3,000 tons may be installed through individual design)
※ The corner-usage type system creates maintenance
space due to the fact that the tank is installed apart from
the piller, regardless of the location of the pillar.
※ In case the pillar takes the role of a wall when installing the tank
through lining-processing with FRP, it may cause inferiority in
the structure intensity of the body and the reinforcement system.
▲ ▲ ▲
Corner :
Since Hi Tank does not take account of the initial value (100%) of the SMC properties but only considers the minimum value (70%) and safety factor while designing, SERIM Hi Tank guaran-tees long-term durability.
※ Overseas quality certificates : Singapore(PSB), UK(WRAS)
※ Domestic quality certificates : GQ(Good Qualiy) Mark
Design standards :<
Designed external forcewater load in the tank, dead load,
snow load, wind load, live load,
seismic load
Horizontal seismic inensity Kh=2/3G
Water Level(Height in Meters) X
0.1kgf/cm2(0.01MPa)
60kg/m2
Below 60m/sec
Less than 0.1%
Cold and hot water is used up to 50℃
Guaranteed Load ConditionsItem
Allowable height for installation of the tank Allowable capacity for installation of the tank
SMC Degradation Process
HI TANK FEATURE
With the use of excellent corrosion-resistant panels, the surface of the tank is uni-formly smooth without any moss growth and therfore, enables long-term use as the panels inhibit the proliferation of bacteria and other various germs by perfectly blocking all the light from outside.
Best HygienicProperties
>> Products with lnferior Hygienic Properties
>> Hi Tank with Excellent Hygienic Properties >> Quality-guaranty certificates
As chlorine gas remains in the air area and this may corrupt the SUS and other metals, it is critical that anti-corrosion materials are selected.
>> Materials for Reinforced ComponentsStainless Steel(STS)
Plastic or corrosion-resistant material
Steel + hot galvanizing
H I G H Q U A L I T Y S M C P A N E L W A T E R T A N K
When light penetrates in the tank : Moss and microorganism grow.
When general STS bolts are used in the air area : Corrosion occurs due to chloride gas.
Welded type air area of the STS tank : Corrosion occurs due to chloride gas.
Insidefor Liquid part
for Air part
Outside
Outstanding Thermal EffectPrevents freezing and dew condensation as it demonstrates outstanding thermal effect due to the inherent thermal resistance of the SMC material and polyurethane heat-insu-lating materials.
Level Adjustable FoundationReplaces concrete foundationAllows to make easy and speedy construction Allows to adjust a very fine tolerance
WatertightnessMaintains perfect watertightness by using PVC foam sealing tape which is excellent for inhibiting the effects of weathering and for its restorative abililty.
※For side panel :
Hi Tank
H I G H Q U A L I T Y S M C P A N E L W A T E R T A N K
Air-Vent(ABS)With PE-mesh insect-guard
External Ladder (Aluminum)
Manhole Convenient & close struture
Special lock mounted
HI TANK FEATURE
Internal Ladder (UPVC)
Lower Water-discharging Panel Structure at the Bottom Area
Uses lowered drainage panel on the bottom so that it can collect and discharge the water.
IIIIIIIIIIInnnnnnnntttttttttteeeeeeeerrrrrrrrnnnnnnnaaaaalllllll LLLLLLaaadddddddddddddddeeeeeerrrrrrr
LLLLLowowowowerererer WWWW W tatatataterererer dd-d-ddiisisisis hchchchcharararar igigigigingngngngg PPPP Panananan lelelelel StStru tct
The Exterior Reinforcement System refers to a a system that
has been designed to support stress that occurs due to the
hydraulic pressure exerted on the outer part of the tank.
With minimized use of reinforcing materials inside the
tank, Hi Tank provides perfect hygiene and easy cleaning
convenience for customers.
※ As a substantial action for preventing corrosion due to chlorine gas,
the air area is designed without any internal reinforcing materials.
>> Reinforcement System at 1~2mH
Hi Tank offers an
Inside at 2mH Sectional view of the inside at 2mH
H I G H Q U A L I T Y S M C P A N E L W A T E R T A N K
REINFORCEMENT SYSTEM
>> Reinforcement System at 3.3~5mH
>> Reinforcement System at 2.3~3mH
Inside at 5mH Sectional view of the inside at 5mHInside at 5mH Sectional view of the inside at 5mH
Inside at 3mH Sectional view of the inside at 3mH
>> Stress Analysis of the Panel >> Hydrostatic Pressure Test
Optimal Structure Design
>> Structural Analysis Flow chart
>>
> >
FEM Stress
Analysis
Comparison
Study
Experiment to
Measure Strain gauae
Stress
CalculationWater-Filling
Sample
Construction
FEM Modeling
Review Drawing
Safety
Evaluation
With years of expertise in structure design, we provide perfect structure safety.
Test forverification
Color Stress
·
·
·
·
·
·
·
·
·
·
·
·
·
·
H I G H Q U A L I T Y S M C P A N E L W A T E R T A N K
HI TANK SAFETY
>> Long-term Durability Test (Field test)
Generally, there is more than one water depletion and filling up a water tank per day on the average. Therefore, if the tank is used for
15 years, approximately 4000 times of water circulation would occur and the tank would sustain about 4000 repetitive loads. Before
launching new product into the market, Hi Tank undergoes field tests to check for water leakage and other defects by applying the
expected actual repetitive loads of water circulation to two tanks every day and night for about 6 months. Such tests make us possible
to guarantee the safety and endurance of Hi Tank.
Test for verification
▲ FIELD TEST
·
·
·
·
·
·
·
·
·
·
·
·
·
·
>> Stress Analysis of the Panel (FEM)
By modeling the entire system of the basic design, we evaluate the
levelof stress when inputting loads and find out the part where the
maximum stress occur. With repetitive complementation of designing,
we establish an optimal system of high reliability.
Color Stress
Strain Gauge Test
Composition of the Panels
Provides effective utilization of space through the use of panels of various sizes.
>> Side Panel Composition Standards by Height
>> Types and Shapes
1000x2000 500x2000 1000x1500 500x1500 300x1000 1000x1000 500x1000 500x500
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
M
1000x1000
H I G H Q U A L I T Y S M C P A N E L W A T E R T A N K
FREE CAPACITY DESIGN
1000x1000 500x1000 500x5001000x1000 1000x1000 500x1000 500x500
Note
W
L
H
Actual size
>> Characteristics
>> Installation Example
Compartment-type Hi Tank
• Can be installed in Maximum Capacity of a Same-Sized Place When installing tanks for different usage in a narrow space such as underground rooms, partitions
can be installed for the maximum capacity.
• Diversification of Usage By installing partitions, you can use one tank for drinking and the other for other purposes
(e.g. fire hydrant, etc.)
• Easy Maintenance As two tanks are installed in one-piece, it is easy to maintain the tank. Even during cleaning,
suspension of water supply can be avoided owing to the use of compartments.
• Low Price Compared with installing each tank for a different usage, the entire price is lower, including
installation expenses.
※
Rear view of the partition Front view of the partition
H I G H Q U A L I T Y S M C P A N E L W A T E R T A N K
COMPARTMENT TYPE
>> Type and Size of the Fittings
Socket-type
Flange-type65A
80A
100A
125A
150A
200A
D
140
150
175
210
240
290
175
185
210
250
280
330
D
20A
25A
30A
40A
50A
50A
65A
75A
100A
D D1 D2
55
65
79
85
98
98
120
132
170
33.5
40
49
55
66.5
66.5
84
97
120
24.1
30.3
39
45
56.7
56.7
72.2
85
110
38
46
55
61
72
72
93
105
127
D3
>> Size and Number of Attachable Fittings by Panels
Specifications for Hi Tank
Section Size of the panel Fitting size Number of fittingsSection Size of the panel Fitting size Number of fittings
Sidepanels
Exclusive-fit panels
1000 X 2000
500 X 2000
1000 X 1300
500 X 1300
1000 X 1000
500 X 1000
500 X 500
500 X 1000
up to 200A
up to 150A
up to 125A
up to 125A
up to 125A
up to 100A
up to 300A
up to 300A
2
2
4
2
4
2
1
1※
Fitting Location
Wall Panel
65A~125A
Wall Panel
20A~100A
Wall Panel
20A~200A
Wall Panel
20A~200A
Wall Panel
20A~100A
※ Female Flange
Applied
600 mm in each direction(1000 mm at the top) is required for installation, construction,
inspection, and maintenance of the tank.
>> Space for Installation
Specification for Foundation Concrete Work
>> PAD Manufacturing Standard
• Width More than 400 mm
• Height More than 600 mm (Including basic frame)
• Interval Less than 1 m in maximum
• Size of outer part W, L + 400 mm
• Floorplan Less than 1/500 in gardient (maintains even surface of the upper part)
SERIM MULSAN Trading Co.,Ltd. warrants that HI TANK shall be
free from defects under the following terms and conditions.
Purchaser warrants and undertakes that it shall use the goods
strictly in accodance with the technical documents of the supplier.
This warranty is not applicable to damage of failure that may oc-
cur as the result of incorrect or caseless storage, incorrect or
careless service, excessive duty or incorrect usage of the com-
modity, incorrect assembling, or nonobservance by the purchaser.
• This warranty is waived if1. Damages are caused by natural disasters including (but not limited to) flood,
fire, lightning, thunderbolt or landslide or by any other external circumstances
such as building collapse.
2. In situations where the tank has been used to store anything other than nor-
maltemperature drinking water in excess of 50℃.
3. In situations where faulty concrete (including, but not limited to, unleveled or
insufficient strength of the concrete) has caused damage.
• Foundation concrete :•
•
4. In situations where the foundation frame is excessively deflected or lakcs flex-
ural strength, which leads to defects in the bottom panel.
•
• Flexural strength :
5. In situations where the tank is deformed due to concussion or compression
damage.
6. In situations where there has been a structural change without our approval
(including arbitrary changes in internal or external components).
7. In situations where facilities, including pipes, which have been installed without
fixtures, around the Hi-Tank have directly or indirectly applied loads to the tank.
5. In situations where failure to follow the cleaning guidelines has led to damage.
• Cleaning frequency :
•
•
9. In situations where the customer has not followed with "Management Instruc-
tions for Hi-Tank Users".
10. In situations where the tank installation has not followed the stated standards
suggested in the construction manual.
H I G H Q U A L I T Y S M C P A N E L W A T E R T A N K
HI TANK FEATURE
Reference Data Warranty>> Construction
1. Foundation Work Foundation work should be done by the demander based on
the designed specifications and considering ground durability
of the site where the tank is to be located
SERIM MULSAN Trading Co., Ltd.
shall do the anchor bolt construction.
The strength of concrete for the foun-
dation work should have physical
properties of over 180 kg/cm2
The thickness of mortar for the finish-
ing work on the concrete base should
be less than 20 mm.
2. Piping Work We will provide sockets for piping in advance at the designated
location by the demander. Therefore, the customer should de-
cide the location and size precisely of the inlet and the outlet for
the water overflow valve and drainage before ordering the tank.
1. DeliveryDo not put an intensive load or impact in
any way while moving the tank. Be sure
to use buffers for the part that the tank
comes in contact with, such as ropes or
the contact with the vehicle.
2. Piping Install a prop while installing piping
and take care not to put an excessive
load on the distributors.
Install pipes from the site where the
tank is located and take care not to
put on a biased load.
Take precautions to avoid fire or other
occurrences/accidents while welding
3. Maintenance and Repair If it is not used for a long time, be sure
to drain the water from the tank.
As the tank is a reservoir of water
for consumption by people, regu-
lar inspection should be done for
safety(more than twice a year)
>> Precautions in Handling
>> Places where Hi Tank is Installed
Trade Center LG Gangnam TowerSeoul National UniversityIncheon International Airport Lotte World
CONSTRACTION NAME OF THE PROJECT TANK SIZECAPACITY
(TON)
>> Korea (2008~2010)
Project Achievements of Hi Tank
CONSTRACTION
GS E&C
DAEWOO E&C
GS E&C
Hyundai Development Co.
Hansin Engineering &Co
DAEWOO E&C
Lotte Engineering &Const.
Lotte Engineering &Const.
Dongil Construction
Hansin Engineering &Co
DAEWOO E&C
DAEWOO E&C
GS E&C
GS E&C
Lotte Engineering &Const.
Daewoo Moters Sales
Daewoo Moters Sales
DAEWOO E&C
DAEWOO E&C
DAEWOO E&C
Seohea Const.
Byucksan E&C
GS E&C
DAEWOO E&C
DAEWOO E&C
Booyoung
NAME OF THE PROJECT
Sinbong 1st APT
Gangwon Land
Sinbong 2nd APT
Cheongju Bongmyung
Incheon Gajwa Rebuilding
Ansan Gojan 7th APT
Incheon First City
Gumi LH Rebuilding Project
Dongil Sweet APT
Incheon Gajwa Rebuilding
Daegu Walsung Prugio APT
ILSAN Gaja Daewoo APT
Baebang Xi 1st APT
Gimpo Wondang
Gumi LH Rebuilding Project
Kangleng IAN
Kimhae Sangkeodong
Ansan Gojan 6th APT
Ansan Gojan 6th APT
Ulsan Prugio APT
Samsan Site
Cheonan Cheongdang APT
Baebang Xi 1st APT
Gangwon Land
Walseong Prujio APT
Booyoung Kimhae 1-1
TANK SIZE
18.5 x 35 x 5mH
15 x (20+20) x 5mH
35 x 19 x 4.5mH
(10+11) x 29 x 4mH
22.5 x (13.5+17) x 3.3
23 x (13+12) x 4.3
28 x (8+5) x 5.8mH
5 x (50+50+50) x 2.5mH
29 x (10+10) x 3.5mH
30 x (13+13) x 2.5mH
14 x 29 x 4.5mH
(4.5+8.5) x 42.5 x 3.3mH
18 x (10.5+9.5) x 5mH
14.5 x (12+14) x 5mH
5 x 150 x 2.5mH
21 x (12+15) x 3mH
17.5 x (13+13) x 3.8
(8+8) x 26.5 x 4mH
14 x (14+13) x 4.5mH
24 x (11+8) x 3.8mH
12 x (17+14) x 4mH
20.5 x 20.5 x 4mH
18.5 x (13.5+11.5) x 5mH
15 x 9.5 +9.5 x 5mH
13 x 29.5 x 4.5mH
11 x 18+18.5 x 3.5mH
CAPACITY (TON)
3,237
3,000
2,776
2,436
2,368
2,334
2,093
1,862
1,820
1,790
1,773
1,770
1,748
1,725
1,715
1,629
1,599
1,568
1,557
1,509
1,488
1,484
1,466
1,425
1,419
1,405
Lotte Engineering &Const.
DAEWOO E&C
Hyundai Development Co.
DAEWOO E&C
Byucksan E&C
DAEWOO E&C
DAEWOO E&C
GS E&C
DAEWOO E&C
Daewoo Moters Sales
Donggwang Const.
DAEWOO E&C
Hyundai Development Co.
Hyundai Development Co.
Youngwang Engineering
DAEWOO E&C
GS E&C
GS E&C
DAEWOO E&C
GS E&C
DAEWOO E&C
DAEWOO E&C
DAEWOO E&C
GS E&C
Dadaedong APT
Incheon Dangha APT
Hwaseong Dongtan site
Ansan Gojan 8th APT
Cheonan Cheongdang APT
Bucheon Jundong Prujio
Ansan Gojan 8th APT
Baebang Xi 2nd APT
Jinhae Seokdong Prujio
Chuncheon IAN
Kangleng Yeongok 3 Block
Kimhae Jangyou 5-10 Block
Gunpo Daeyami
Ilsan Pungdong I-Park
Daejon
Daejon Jangdae Prujio
LG Const, Mapo
Mapo
Kilum Daewoo APT
Busan Yeonji Xi APT
Busan Bukok Daewoo APT
Kimhae North 2th
Busan Trumph Centerm
Jinhae Xi APT
(11.5+7.5) x 27 x 3.5mH
9.5 x (15+19) x 4.5mH
14 x (11+11) x 4.8mH
12.5 x 24.5 x 4.5mH
18 x 20 x 4mH
13 x 19.5x 5mH
11.5 x 24.5 x 4.5mH
17 x (10+9) x 4mH
(7+8) x 21.5 x 4mH
14 x (15+11) x 3.5mH
(10+10) x 21 x 3mH
11.5 x (18+17) x 3mH
11 x (14+13.5) x 4mH
7+7 x 215 x 4mH
25.5 x (9.5+9) x 2.5mH
18 x 11+11 x 3mH
9 x (17+17) x 3.5mH
9 x (17+17) x 3.5mH
26 x 13 x 3.5mH
12.5 x (11+11) x 4mH
15 x (14+11) x 5mH
13.5 x 23 x 3.3mH
11.5 x (11+10) x 4.5mH
17.5 x (6+6.5) x 4.5mH
1,345
1,327
1,324
1,324
1,283
1,227
1,213
1,196
1,194
1,190
1,188
1,147
1,146
1,108
1,099
1,080
1,071
1,071
1,071
1,068
1,020
998
996
984
GS E&C
DAEWOO E&C
GS E&C
Hyundai Development Co.
Hansin Engineering &Co
DAEWOO E&C
Lotte Engineering &Const.
Lotte Engineering &Const.
Dongil Construction
Hansin Engineering &Co
DAEWOO E&C
DAEWOO E&C
GS E&C
GS E&C
Lotte Engineering &Const.
Daewoo Moters Sales
Daewoo Moters Sales
DAEWOO E&C
DAEWOO E&C
DAEWOO E&C
Seohea Const.
Byucksan E&C
GS E&C
DAEWOO E&C
DAEWOO E&C
Booyoung
CONSTRACTION
Lotte Engineering &Const.
DAEWOO E&C
Hyundai Development Co.
DAEWOO E&C
Byucksan E&C
DAEWOO E&C
DAEWOO E&C
GS E&C
DAEWOO E&C
Daewoo Moters Sales
Donggwang Const.
DAEWOO E&C
Hyundai Development Co.
Hyundai Development Co.
Youngwang Engineering
DAEWOO E&C
GS E&C
GS E&C
DAEWOO E&C
GS E&C
DAEWOO E&C
DAEWOO E&C
DAEWOO E&C
GS E&C
CONSTRACTION
(11.5+7.5) x 27 x 3.5mH
TANK SK IZE
9.5 x (15+19) x 4.5mH
14 x (11+11) x 4.8mH
12.5 x 24.5 x 4.5mH
18 x 20 x 4mH
13 x 19.5x 5mH
11.5 x 24.5 x 4.5mH
17 x (10+9) x 4mH
(7+8) x 21.5 x 4mH
14 x (15+11) x 3.5mH
(10+10) x 21 x 3mH
11.5 x (18+17) x 3mH
11 x (14+13.5) x 4mH
7+7 x 215 x 4mH
25.5 x (9.5+9) x 2.5mH
18 x 11+11 x 3mH
9 x (17+17) x 3.5mH
9 x (17+17) x 3.5mH
26 x 13 x 3.5mH
12.5 x (11+11) x 4mH
15 x (14+11) x 5mH
13.5 x 23 x 3.3mH
11.5 x (11+10) x 4.5mH
17.5 x (6+6.5) x 4.5mH
18.5 x 35 x 5mH
15 x (20+20) x 5mH
35 x 19 x 4.5mH
(10+11) x 29 x 4mH
22.5 x (13.5+17) x 3.3
23 x (13+12) x 4.3
28 x (8+5) x 5.8mH
5 x (50+50+50) x 2.5mH
29 x (10+10) x 3.5mH
30 x (13+13) x 2.5mH
14 x 29 x 4.5mH
(4.5+8.5) x 42.5 x 3.3mH
18 x (10.5+9.5) x 5mH
14.5 x (12+14) x 5mH
5 x 150 x 2.5mH
21 x (12+15) x 3mH
17.5 x (13+13) x 3.8
(8+8) x 26.5 x 4mH
14 x (14+13) x 4.5mH
24 x (11+8) x 3.8mH
12 x (17+14) x 4mH
20.5 x 20.5 x 4mH
18.5 x (13.5+11.5) x 5mH
15 x 9.5 +9.5 x 5mH
13 x 29.5 x 4.5mH
11 x 18+18.5 x 3.5mH
TANK SK IZE
H I G H Q U A L I T Y S M C P A N E L W A T E R T A N K
HI TANK FEATURE
>> Overseas (2008~2011)
NAME OF THE PROJECT
Burj Residential
Palm Jumeirah Sofitel Resort
City of Lights
DWTC
International City Packag-5International City Packag-8Qaffay Island Resory
Dubai Heritage Vision ResortWaterhouse at umm Al QiwanDown Town Jebel Ali Zone 1Indes Tower Res Bldg on Plot
Aquasan FactoryAl Adasini VillaQattan Villa
PAAET - Lab & Workshp Extn
HT11010QBritish Printing Press
Qurain Waste Dump SiteGD-4Vehicle Wash Station at NavalEgaila Pumping StationUS Army CampAl Shayiy HQ at Al RaiJahra&subhan ICE FactoryJahra&subhan ICE FactoryGUSTAl Yasra Cold StoresMinister of Defence DiwaniyaKOC MaintenanceUdairi CanpDera Tower
TANK SIZE
5 X 10(5+5) X 3mH5 X 7.5(3.5+4) X 4mH 1 x 1 x 1mH1 x 2 x 1mH2 x 2 x 1mH1 x 3 x 1mH2 x 3 x 1mH2 x 4 x 1mH2 x 2 x 2mH5 x 9 x 2.3mH5 x 6 x 3.5mH5 x 7 x 3.3mH8 x 11 x 2mH5 x 11 x 2mH7 x 8 x 2mH2 x 5 x 1.5mH2 x 4 x 2mH6 x 18 x 3.5mH10 x 10 x 3mH10 x 15 x 2mH1 x 5 x 2mH4 x 6 x 2.54 x 6 x 4mH6 x 16 x 2mH
6 x 11 x 3mH2 x 2 x 1.8mH5 x 4 x 1mH4 x 3 x 2mH4 x 4 x 1.5mH6 x 2 x 2mH(8x7) - (4x4) x 1mH11 x 9 x 2.5mH{(5.5 x 11.5) - (3 x 4.5)} x 2.511 x 8 x 4mH4 x 3 x 2mH7 x 9(4+5) x 3.5mH2 x 2 x 2.5mH10 x 11 x 311 x 11.5 x 310 x 10 x 4mH7 x 7 x 3mH4 x 10 x 2mH4 x 7 x 2mH10 x 10 x 4mH10 x 10 x 2mH6 x 16 x 4mH[(7x5)+(2x2)+(2x2)+(7x5)]x42 x 4 x 2mH1 x 3 x 2mH4.5 x 14 x 4.3mH7 x 8 x 2mH
QUANTITY
114961221422642322911124421
11111111116
442472911111112
150150
1243688
103.5105
115.51,056
440224480464378300300240240192192
1987.22024242472
247.549.835224
220.510
3301518800588560464400200336312300271271224
SINGAPORE
TAIWAN
QATAR
OMAN
LEBANON
JORDAN
JEC
Chinatown PlazaDe La Salle SchoolChangi Business Park Chen.1 Hotel Block
Farnhill CrescentSeletar CampUPS
Nan Chiau Pri SchChinatown PlazaExtg.10 Stry WarehouseWorld Trade CentreEunoslink Thchnology ParkExtg.10 Stry WarehouseSupreme CourtKeat Hong CampParkwest CondoPulau Ubin - NPPC Camp SiteInstitute of Technical Education(ITE)Tesearch Techono PlazoGurkha Cantonment Phase 3Parkway Parode
SR-01 STS444
Ras Laffan RefineryQIOCO Twin TowerDoha City Center Phase IIFashion ShowroomDoha ZooM TowerQatar Navigation TowerDurat Al Sahil
MOD Mobella
Ras Laffan Refinery
Hilton Dead Sea Resort
DAMAC
9(4+5) x 11 x 4mH
4(2+2) x 4 x 3mH4(2+2) x 4 x 3mH13.5(6.5+7) x 3 x 4mH4(2+2) x 2 x 4mH4(2+2) x 2 x 2mH4(2+2) x 2 x 2.5mH1.5 x 1.5 x 1mH4(2+2) x 4 x 1mH{(11x3)m+(3m x 5m)}x 2.5mH15m x 3m x 2.5mH11m x 2m x 2.5mH2(1+1)m x 1m x 4mH3(1+2)m x 3m x 3.5mH3(1+2)m x 3m x 3mH4(2+2)m x 4m x 2mH4m x 1m x 2mH(9+9+9) x 5 x 3mH17 x 6 x 3 mH(10+9) x 7 x 4mH(5+5) x 7 x 3mH(11+11) x 7.5 x 2mH(2+2) x 3 x 2mH5 x 4x 2.5(5+5) x 6 x 3(4+4) x 10 x 3(8+6) x 6 x 2(3+3) x 9 x 36 x 4.5 x 3
1.5 x 6 x 2.5mH2 x 1x 2mH4 x 3 x 2mH4.5 x 3 x 2mH
11 x 12 x 4mH6 x 10 x 2mH4 x 7.5 x 2.5mH8 x 8 x 3mH4 x (7+7) x 3mH4 x 4 x 2mH3.5 x 6 x 2.5mH5 x 7 x 3mH
6 x 9 x 4mH
5 x 9.5 x 2.5mH
4 x 4 x 2mH8 x 4 x 2mH7 x 3 x 2mH3.5 x 4 x 2mH5 x 22 x 2mH4 x 9 x 2mH
1
1111111111111111221219411112
1111
13411421
2
1
211111
396
4848
1623216202.316
120112.5
558
31.527328
810612532420330216200180204168162162
22.54
2427
528360330194168128105105
432
119
32644228
22072
COUNTRY
UAE
KUWAIT
NAME OF THE PROJECT TANK SIZE QUANTITY CAPACITY
(TON) CAPACITY
(TON) COUNTRY
WORLD-BEST QUALITY AND TECHNOLOGY
>> Overseas Distribution Network
TIWANSingapore Kuwait
RUSSIA
CHINA
TIWAN
SINGAPORE
IRAN
KUWAIT
LIBYA
IRANNARARI
LLLLLLLLIIIIBB
ITTTI
Hi Tank is the most ideal water tank that is har-
monized with world-class technology in water tank
design and with perfect construction based on long
experience. You can store clean water for a long
time and be assured of the use with the Hi Tank and
rest assured with systematic quality management.
H I G H Q U A L I T Y S M C P A N E L W A T E R T A N K
HI TANK FEATURE
>> To prevent dew condensation in the water tank...
Technical Help
Checklist for checking dew condensation thought the calculation of dew point temperature▲
To check the dew condensation in the tank, identify the difference between the inside of water temperature and the outside of tank temperature. Draw a line vertically at the point and mark the point (A) where the line meets the curve representing the relative humidity inside the tank. Draw an oblique line to the dew point temperature curve and mark it contact point (B). Point (B) is the dew point temperature at which dew condensation may occur.
Occurrence of dew condensation Dew point temperature < the temperature inside the tank : Dew condensation does not occur.
Dew point temperature > the temperature inside the tank : Dew condensation occurs.
Handling of dew condensation It is important to lower the relative humidity in the tank.
It is important to complement the ventilation/duct system that corresponds to the size of the tank.
Dew point temperature
Relative humidity
Temperature difference curve between the inside and outside
25°C
15°C
Head Office
Tel Fax. E-mail.
Factory Ⅰ
Factory Ⅱ
> A Sales Agency
HI TANK YSISERIMM
w w w . h i t a n k . c o . k r