5.benchmarking of
TRANSCRIPT
Benchmarking of North Indianurban water utilities
Mamata R. Singh, Atul K. Mittal and V. UpadhyayIndian Institute of Technology-Delhi, New Delhi, India
Abstract
Purpose – The purpose of this paper is to develop a suitable benchmarking framework thatencompasses multiple criteria of sustainable water supply services for assessing the performance ofselect North Indian urban water utilities and also to arrive at potential for input reductions (or efficientinput levels).
Design/methodology/approach – The study considers 35 North Indian urban water utilitiespertaining to two union territories (Chandigarh and Delhi) and three states (Haryana, Punjab and UttarPradesh) for sustainability-based performance assessment using input-oriented variable returns toscale data envelopment analysis (DEA) model. Important criteria considered for sustainable watersupply services are service sufficiency, service reliability, resource conservation, staff rationalization,and business viability which in turn address the key sustainability dimensions (social, environmentaland financial).
Findings – The approach when applied to a sample of 35 North Indian urban water utilities showslow-performance levels for most of the utilities, with significant scope for reduction in operation andmaintenance expenditure, staff size and water losses. State/UT-wise analysis of sustainability-basedaverage efficiency presents the highest score for Chandigarh and the least score for Haryana, whereasthe rest of the three states/UT score in between them.
Research limitations/implications – Limited data availability has constrained the incorporationof other sustainability criteria (such as services to the poor, tariff design, customer services, revenuefunctions, etc.) for efficiency analysis of urban water utilities. Also, estimation of efficiency scores doesnot encompass the effect of exogenous environmental factors which are beyond utilities’ managerialcontrol (such as topography, population density, water source, ownership status, etc.).
Practical implications – This framework would be useful for the regulator or operator of the facilityto rank the utilities and devise performance-linked incentive mechanism or price cap regulation.
Originality/value – This paper is a significant departure from the other international benchmarkinginitiatives/studies as it develops a holistic framework for benchmarking in the water sector thatencompasses multiple criteria of sustainable water supply services using DEA as a tool.
Keywords India, Water industry, Urban regions, Benchmarking
Paper type Technical paper
1. IntroductionIndia has to support one-sixth of the world’s population with meager 1/50th of world’sland and only 1/25th of the world’s water supply. Although the world waterdevelopment report ranked India 127th out of 180 nations for fresh potable wateravailability to its citizens, India is the second largest consumer of water in the worldafter China (Kapadia, 2005). Exponential growth of population, industrialization andurbanization has resulted in progressive decline in the per capita availability of waterin Indian cities. In India, water supply to the consumer is inadequate, intermittent,generally for low duration and of poor quality. Considering the growing water scarcityand poor services to the consumers, Indian urban water utilities need to instillefficient practices for sustainable water supply services to the consumers. An attempt
The current issue and full text archive of this journal is available at
www.emeraldinsight.com/1463-5771.htm
BIJ18,1
86
Benchmarking: An InternationalJournalVol. 18 No. 1, 2011pp. 86-106q Emerald Group Publishing Limited1463-5771DOI 10.1108/14635771111109832
towards benchmarking of Indian water utilities would serve as an important step inthis direction.
Though several benchmarking initiatives have been undertaken internationally(Table I), Indian urban water sector has hardly witnessed any benchmarking study. Mostof such initiatives do not view performance from sustainability dimensions and computeefficiency with major focus on cost-saving aspect. Also such studies have not endeavoredto estimate potential for reduction in parameters other than cost (for example,unaccounted for water (UFW, i.e. water loss) reduction, staff reduction, etc.). Attempts toestimate utilities’ performance in totality that encompass important criteria (such asservice sufficiency, service reliability, resource conservation, staff rationalization,business viability, etc.) of sustainable water supply services (referred as “sustainabilitycriteria” hereafter in this study) have not been made so far in the water sector. This study,therefore, intends to fill this gap and evolves suitable benchmarking framework forsustainability-based performance assessment of 35 North Indian urban water utilitiesusing data envelopment analysis (DEA) approach. The efficiency scores obtainedthrough DEA model may be used to rank the utilities and estimate potential for costsavings and other input reductions (such as UFW, i.e. water loss, staff size and operationand maintenance (O&M) expenditure). The study uses secondary data of 35 urban waterutilities (hereafter referred as decision-making units, i.e. decision making unit (DMUs) asper DEA terminology) pertaining to three states (Haryana, Punjab and Uttar Pradesh)and two union territories (Delhi and Chandigarh) provided by National Institute ofUrban Affairs (NIUA Report, 2005). The data are of the year 1999.
This paper is divided into five sections including the present one. Section 2 discussesthe status and problems of Indian urban water sector and further reviews the literatureon benchmarking and DEA in water sector. Section 3 presents the methodology for thestudy. Section 4 discusses the benchmarking framework using DEA including the basisfor selection of input and output variables for assessment of technical and scaleefficiency (te and se) scores of the DMUs. Section 5 covers the analysis of DEA results for35 North Indian DMUs. Finally, Section 6 provides conclusions and recommendations.
2. Literature reviewThis section initially discusses the status and problems of Indian urban water sectorcovering a range of issues, namely: per capita water supply, revenue receipts, waterquality, UFW, staff size and O&M expenditure including examples of few internationalstudies. The second part of this section introduces DEA as a benchmarking tool andreviews the benchmarking studies undertaken in water sector by various authors indifferent countries using DEA.
2.1 Status and problems of Indian urban water sectorIn India about two-thirds of the cities have net per capita supply below the establishednorms as is evident from NIUA Report (2005). The status of revenue receipts is very poor.For example, in certain Maharashtra towns, average revenue per connection is Rs 120a year, as against expenditure of Rs 1,300 a year for each connection (Patwardhan, 1993).Though this study is old but the current situation has not yet improved. Also quality ofwater supplied to the consumers is often in question as more than 50 percent of urbancenters in India do not monitor raw water quality and have inadequate laboratoryfacilities for testing water quality. For the remaining Indian cities, periodicity of water
North Indianurban water
utilities
87
Cou
ntr
yA
uth
or(s
)In
pu
tsO
utp
uts
Su
stai
nab
ilit
ycr
iter
iaig
nor
ed/r
emar
ks
Pal
esti
ne
Als
har
ifetal.
(200
8)C
ost
ofw
ater
bou
gh
tan
den
erg
yco
sts,
mai
nte
nan
cean
dot
her
exp
ense
san
dst
aff
sala
ryan
dw
ater
loss
es
Tot
alre
ven
ue
Ser
vic
esu
ffici
ency
and
serv
ice
reli
abil
ity
Per
uB
erg
and
Lin
(200
7)O
per
atin
gco
sts,
nu
mb
erof
staf
fan
dn
um
ber
ofco
nn
ecti
ons
Vol
um
eof
wat
erb
ille
d,
nu
mb
erof
cust
omer
s,se
rvic
eco
ver
age
and
con
tin
uit
yof
serv
ice
Res
ourc
eco
nse
rvat
ion
and
bu
sin
ess
via
bil
ity
Ug
and
aM
ug
ish
a(2
007)
Lab
our,
net
wor
kle
ng
th(a
sa
pro
xy
for
cap
ital
)an
dop
erat
ing
exp
ense
s(s
toch
asti
cfr
onti
eran
aly
sis
(SF
A)
tech
niq
ue
use
d)
Con
nec
tion
san
dw
ater
bil
led
asa
per
cen
tag
eof
wat
erd
eliv
ered
Ser
vic
ere
liab
ilit
y,
reso
urc
eco
nse
rvat
ion
and
bu
sin
ess
via
bil
ity
Can
ada
Ren
zett
ian
dD
up
ont
(200
7)
Lab
our
exp
end
itu
re,
mat
eria
lsex
pen
dit
ure
and
kil
omet
ers
ofd
istr
ibu
tion
net
wor
k
Wat
erd
eliv
ered
Ser
vic
ere
liab
ilit
y,
reso
urc
eco
nse
rvat
ion
and
bu
sin
ess
via
bil
ity
Ind
iaK
uls
hre
sth
a(2
005)
Op
erat
ing
exp
end
itu
rean
dU
FW
Nu
mb
erof
con
nec
tion
s,le
ng
thof
dis
trib
uti
onn
etw
ork
and
wat
erp
rod
uce
d,
pop
ula
tion
cov
ered
and
nu
mb
erof
hou
rsof
sup
ply
Sta
ffra
tion
aliz
atio
nan
db
usi
nes
sv
iab
ilit
y
Bra
zil
Tu
pp
eran
dR
esen
de
(200
4)
Lab
our
exp
ense
s,op
erat
ion
alco
sts
and
oth
erop
erat
ion
alco
sts
Wat
erp
rod
uce
d,
trea
ted
sew
age,
pop
ula
tion
serv
edb
yw
ater
and
pop
ula
tion
serv
edb
ytr
eate
dse
wag
e
Res
ourc
eco
nse
rvat
ion
and
bu
sin
ess
via
bil
ity
UK
Th
anas
sou
lis
(200
0)O
PE
X(o
per
atin
gex
pen
dit
ure
)W
ater
pro
du
ced
,n
um
ber
ofco
nn
ecti
ons
and
len
gth
ofd
istr
ibu
tion
net
wor
kS
erv
ice
reli
abil
ity
,re
sou
rce
con
serv
atio
n,
staf
fra
tion
aliz
atio
nan
db
usi
nes
sv
iab
ilit
yJa
pan
Aid
aet
al.
(199
8)N
um
ber
ofem
plo
yee
s,op
erat
ing
exp
ense
sb
efor
ed
epre
ciat
ion
,n
etp
lan
tan
deq
uip
men
tan
dp
opu
lati
onan
dle
ng
thof
pip
es
Op
erat
ing
rev
enu
esan
dw
ater
bil
led
(net
ofle
akag
e)S
erv
ice
reli
abil
ity
and
reso
urc
eco
nse
rvat
ion
Gh
ana
Ak
osaet
al.
(199
5)T
ech
nic
al,
fin
anci
al,
econ
omic
,in
stit
uti
onal
,so
cial
and
env
iron
men
tal
fact
ors
Rel
iab
ilit
y,
uti
liza
tion
and
con
ven
ien
cefa
ctor
sV
aria
ble
sar
eat
ver
yab
stra
ctle
vel
US
AL
amb
ertetal.
(199
3)A
nn
ual
lab
our,
ener
gy
use
d,
mat
eria
lsin
pu
tan
dv
alu
eof
cap
ital
Tot
alw
ater
del
iver
edS
erv
ice
reli
abil
ity
,re
sou
rce
con
serv
atio
n(U
FW
con
trol
)an
db
usi
nes
sv
iab
ilit
y
Table I.Benchmarking studiesusing DEA in watersector
BIJ18,1
88
quality monitoring (raw water or water at treatment plant or at distribution network)varies from daily basis to once in a month to once in six months (NIUA Report, 2005).
For water supply systems, UFW are attributed to line losses, fire hydrant losses, firefighting and evaporation, free supply to slum/J.J areas, billing and collection inefficiencies,theft, etc. In India, on an average about 40 percent of the consumers are not charged for thewater supply services due to poor billing and collection practices which eventuallyencourage them to use water liberally and waste it. UFW in Indian cities range between20 and 40 percent and is gradually increasing indicating substantial revenue loss(Singh et al., 2005). An international study for UFW by Tynan and Kingdom (2002) for top25 percent of developing countries recommend a target of 23 percent (or less). The meanfor developed countries is 16 percent. Average UFW in Singapore, Japan, the USA andFrance are 6, 11, 12 and 15 percent, respectively, (Yepes and Dianderas, 1996).
Currently, most of the government organisations responsible for water supply areoverstaffed where number of employee per 1,000 connections ranges from 15 to 25(Singh et al., 2005) whereas the recommended ratio of the developing countries is in therange of five to ten (Kaaya, 1999). Owing to overstaffing, staff expenditure for Indiancities is also very high (about 30 percent). A larger share of expenditure on establishmentconsiderably reduces the funds available for operation and maintenance of water supplysystem. Expenditure on electricity, consumables, repairs and replacements and otherrelated expenses together constitute the operation and maintenance head. In India, abouthalf the total expenditure on water supply service is spent on O&M in most of the urbancenters (NIUA Report, 2005). O&M costs per cubic meter of water are Rs 13, 16 and 17 forChennai, Bangalore and Hyderabad, respectively, whereas typical prices charged toconsumers in India is about Rs 1.5-2.00 per cubic meter (Raghupathi and Foster, 2002).Thus, consumers are charged for water supply below cost and many a times revenuegenerated is not sufficient even to cover manpower cost.
The status and problems discussed so far indicate the overall position of Indian urbanwater sector. The present study, however, focuses on urban water utilities of North Indianregion. The states (Punjab, Haryana and Uttar Pradesh) and union territories (Delhi andChandigarh) selected in the study fall in the north central part of India and are borderedwith mountains (Himalayas) on its north side and great plateau on its south side. Thisregion is almost dead flat, very fertile and one of the largest food producing basketsaccommodating a sizeable part of the Indian population. Water supply being a statesubject in India, the states and union territories considered for the analysis may have slightdifferences in their policies; institutional arrangements, tariff structures, etc. but have greatsimilarities in terms of climatic conditions, topography, water supply practices and urbaninhabitants’ lifestyles and cultural values. Considering the similarities and the importanceof this region in terms of high population density and water resources availability(due to abundance of rivers Satluj, Beas, Ravi, Ganga, Yamuna, Ramganga, Gomati,Ghagra and Gandak) and also the want of reasonable sample size, the present study dealswith benchmarking of 35 North Indian urban water utilities using DEA approach.
2.2 Benchmarking using DEAAccording to Tupper and Resende (2004), efficiency measurement studies have been“relatively scarce” in the water supply sector. Lin (2005) and Berg (2006) also acknowledgethe fact that water sector has been given less attention and limited data availability is oneof the reasons for the same. For benchmarking, Berg (2006) has categorized many
North Indianurban water
utilities
89
alternative models into 11 analytic techniques arrayed in terms of the technical andquantitative skills required for implementing the different approaches. Jamasb and Pollitt(2001) have suggested that benchmarking methods should be treated as a decision aid tool,need to be applied with care and regard to the context in which they are used and their rawresults should not be regarded as replacements for decision makers and their judgments.A good review of benchmarking methods is available in Coelli et al. (1998, 2003).
Most international initiatives on benchmarking limit themselves toindicator-by-indicator comparisons and do not employ standard quantitativetechniques. Only very few studies have dealt with the most recent benchmarkingmethods which use the most efficient utilities to form an efficiency frontier with respectto which rest of the utilities are compared. These methods are called frontier methods.One of the most used frontier method is DEA which stemmed from the concept of Paretooptimality and states that, within the given limitations of resources and technology,there is no way of producing more of some desired commodity without reducing outputof some other desired commodity (Zeleny, 1982). Charnes, Cooper and Rhodes (CCR) firstintroduced the term DEA and received wide attention as it defined a simple measure offirm efficiency accounting for multiple inputs and outputs (Charnes et al., 1978).
DEA in essence is a linear programming technique that converts multiple inputs andoutputs into a scalar measure of efficiency. The most efficient utilities are rated to havean efficiency score of one, while the less efficient utilities score between zero and one. Theutilities lying on efficient frontier are identified as best practice utilities by DEA. CCRconsidered constant returns to scale (CRS) model with input orientation whereassubsequent works by Banker, Charnes and Cooper (BCC) proposed a variable returns toscale (VRS) model with either input or output orientation (Banker et al., 1984). Both CCRand BCC are most commonly used DEA formulations in the utility sector. After CCR andBCC, there have been a large number of papers which have extended the application ofDEA methodology. Table I summarises few benchmarking studies undertaken in watersector by various authors in different countries using DEA. It also lists the input andoutput variables used for DEA in these studies along with the identification ofsustainability criteria that has been ignored under these studies.
3. MethodologyThe study uses DEA as a benchmarking tool to estimate efficiencies of 35 DMUs underconsideration. Figure 1 presents the methodological sequence for the present study. Thefirst step consists of selection of DMUs that enter the analysis. Important criteria forsustainable water supply services (namely, service sufficiency, service reliability,resource conservation, staff rationalization, business viability, etc.) that address the keysustainability dimensions (social, environmental and financial) are then identifiedagainst which efficiencies of the selected 35 DMUs are to be evaluated. Next crucial stepfor DEA consists of model specification and selection of input and output variables(Table II) that address the above-identified sustainability criteria. DEAP (Version 2.0)software is run to obtain te and se scores for each DMU. The study finally analyses theDEA results to assess performance status of 35 DMUs.
3.1 DEA formulationsFor water utilities input minimization is generally preferred option as output isoften exogenous and beyond managerial control at least in short to medium term.
BIJ18,1
90
Also, the analysis in the paper intends to suggest input benchmarks. Hence, the basicDEA model discussed below has an input orientation. This section describes the DEAformulation employed in the paper for analysis.
In case of CRS hypothesis as developed by Charnes et al. (1978), a proportionalincrease of all input levels produces equi-proportional increase in output levels. TheCRS assumption is only appropriate when all firms are operating at an optimal scale.Imperfect competition, constraints on finance, etc. may cause a firm to not operate atoptimal scale. Banker et al. (1984) suggested an extension of the CRS DEA model toaccount for VRS situations, by adding a convexity constraint as shown in equation (3).
The efficiency score in the presence of multiple input and output factors is defined as:
Efficiency ¼weighted sum of outputs
weighted sum of inputsð1Þ
Assuming that the chosen sample has z DMUs, each with m inputs and n outputs, therelative efficiency score of a test DMU p is obtained by solving the model proposed byCharnes et al. (1978):
max
Pnk¼1vkykpPmj¼1ujxjp
s:t:
Pnk¼1vkykiPmj¼1ujxji
# 1 ;i ð2Þ
Figure 1.Methodology
Identification of important criteria for sustainablewater supply services
Model specifications and selection of input/outputvariables representing the above criteria for DEA
Results using DEA software
Analysis of DEA results
Selection of 35 waterutilities (DMUs) for DEA
Inputs/outputs Sustainability criteria Sustainability dimensions
Inputs1. UFW Resource conservation Environmental2. Total staff Staff rationalization Financial3. O&M expenditure Resource conservation EnvironmentalOutputs1. Net per capita supply Service sufficiency Social2. Total revenue receipts Business viability Financial3. Water treated Service reliability Social
Table II.Inputs, outputs and
sustainability
North Indianurban water
utilities
91
where:
i ¼ 1 to z;
j ¼ 1 to m;
k ¼ 1 to n;
yki ¼ amount of output k produced by DMU i;
xji ¼ amount of input j utilized by DMU i;
vk ¼ weight given to output k; and
uj ¼ weight given to input j.
The fractional program in equation (2) is subsequently converted to a linearprogramming format and a mathematical dual is employed as shown in equation (3), tosolve the linear program. The dual reduces number of constraints from z þ m þ n þ 1in the primal to m þ n in the dual; thereby rendering the linear problem easier to solve:
minu;lu s:t: uxjp 2Xz
i¼1
lixji $ 0 ;j 2 ykp þXz
i¼1
liyki $ 0 ;k
Xz
i¼1
li ¼ 1 ! Convexity constraint li $ 0 ;i
ð3Þ
where:
u efficiency score; and
li dual variables (weights in the dual model for the inputs and outputs of thez DMUs).
The above problem is run z times for calculating the relative efficiency scores (u) of all theDMUs. Each individual DMU in the sample requires the solution of linear program.Distance of a DMU from the frontier measures its efficiency scores. A DMU is efficient ifit operates on the frontier and also has zero associated slacks. The slacks are outputshortfalls and input surpluses associated with the examined DMU, in addition to theincrease of all outputs or the decrease in all inputs by a factor equal to the efficiencyscore. The technique also computes input and output targets that would turn aninefficient unit into an efficient one.
Note that the convexity constraintPz
i¼1li ¼ 1� �
essentially ensures thatbenchmarking of an inefficient firm is only against firms of a similar size. That is,the projected point (for that firm) on the DEA frontier will be a convex combination ofobserved firms. CRS case has no convexity restriction imposed. Hence, in a CRS-DEA,benchmarking of an inefficient firm may be against firms of substantially larger(smaller) size and the “l” weights will sum to a value greater than (less than) one.
The use of the CRS specification when not all firms are operating at the optimal scale,results in measures of te confounded by se. The use of the VRS specification permits thecalculation of te devoid of these se effects and is most commonly used in the serviceor utility sector. As the CRS contains VRS within its envelope, VRS model provides tescores which are greater than or equal to those obtained under CRS model. If there is adifference in the CRS and VRS te scores for a particular firm, then this indicates
BIJ18,1
92
that the firm has scale inefficiency. The DEA model solved may be useful to identifywhether a DMU on the VRS efficient boundary operates with constant, increasing ordecreasing returns to scale (CRS, IRS or DRS).
4. Benchmarking framework using DEAThe important sustainability criteria incorporated into analysis are service sufficiency,service reliability, resource conservation, staff rationalization and business viability.Most of the output variables considered for analysis in the water sector are generallyexogenous and are beyond managerial control at least in short to medium term renderingthe exercise on output-oriented DEA model futile. Input orientation has, therefore, beenconsidered for DEA as the objective of the analysis is to suggest input benchmarks toproduce a given level of output. This is useful to estimate the potential for reduction ininputs – O&M expenditure, UFW and staff size and hence potential for cost savings.
Percentage cost-saving potential (% CSP) of each DMU has been calculated as:
% CSP ¼Actual Exp:2 projected Exp:
Actual Exp:£ 100
Or, potential for input reduction (%) of each DMU has been calculated as:
¼Actual input 2 projected input
Actual input£ 100
where, inputs may be O&M expenditure or UFW or staff size.For utility or service sector, output levels cannot be raised equi-proportional to input
levels and hence VRS-DEA model is more appropriate. This paper, therefore, considersinput-oriented VRS-DEA model for analysis.
4.1 Selection of input and output variablesThe input and output variables chosen for DEA have been determined on the basis of:
. reference to the standard literature on whatever scarce work on benchmarkinghas been carried out so far in the water sector (Table I);
. analogy drawn from the variable selection in electricity sectors (as both waterand electricity sectors are essentially network industries with natural monopolycharacteristics);
. ideas drawn from the variable selection for benchmarking by other servicesectors (namely, hospital, educational institutions, tourism, banks, etc.); and
. data availability for the 35 DMUs under consideration from NIUA Report.
Suitability of the chosen input and output variables are further affirmed using Pearsons’correlation method which checks the compliance with isotonicity relationship(i.e. increase in input should result in increase in output). Number of input and outputvariables is so determined that their sum total is less than one-third of the total number ofDMUs selected for DEA (Banker et al., 1989) in order to strengthen the discriminatorypower of DEA and avoid “degree of freedom” problems to occur.
Utilities which are not subjected to competition may compromise its service quality(or reliability) for reducing costs and to increase profits. Service reliability criteriontherefore needs to be incorporated for efficiency estimation in order to effectively align
North Indianurban water
utilities
93
incentives with the reliability factors. UFW if controlled would enhance environmentalquality and assure long-term availability of water. This is of special significance as thegovernment policy now accords major emphasis on resource conservation.Rationalisation of staff size and adequate revenue generation are the two most criticalissues which need to be given due consideration for business viability of water utilities.The present study therefore considers UFW (in million litres’ per day (MLD), total staff(nos) and operation and maintenance (O&M) expenditure (in Indian rupees, INRmillions/year) as three inputs and net per capita supply (in liters per capita per day – lpcd),total revenue receipts (in INR millions/year) and water treated (as percentage of waterproduced) as three outputs. Service sufficiency and service quality criteria address socialsustainability dimension and is represented by outputs net per capita supply and watertreated. Resource conservation criterion address environmental sustainability dimensionand is represented by inputs UFW and O&M expenditure (O&M expenditure serves as aproxy for energy consumption in the absence of exclusive data on energy consumption forthe 35 DMUs). Staff rationalization and business viability criteria address financialsustainability dimension and are represented by an input total staff and output totalrevenue receipts, respectively. The inputs and outputs chosen for DEA are shown inTable II.
5. Results and analysisThis section covers the results of efficiency analysis in terms of te scores, se scores,returns to scale (RTS), benchmark DMUs, input and output slacks, percentage CSPs,etc. for each DMU; ranking position, number of DMUs under different efficiency rangesand cost-recovery analysis. This section further explores the scope for reduction inO&M expenditure, UFW and staff size (Tables III and IV).
5.1 Efficiency analysiste for 35 DMUs ranges from 0.268 to 1 with its average value as 0.814. se for 35 DMUsranges from 0.279 to 1 with its average value as 0.879 (Table III and Figure 2).
Percentage CSP for 35 DMUs ranges from 0 to 73 percent. Total CSP of all DMUs isINR 410 millions/year (US$1.00 < 45.00 Indian rupees, INR) and is 10.65 percent of theactual annual expenditure of all DMUs (Table IV).
For 14 DMUs se . te whereas for 13 DMUs te . se and for rest of the eight overallefficient DMUs te ¼ se (Table III and Figure 2). DMUs with te . se need to place majoremphasis on improving their operational scale whereas the DMUs with se . te need tofocus on productivity and technology improvement. These measures would enhancethe operational efficiency of the DMUs.
Data on RTS show that 11 DMUs have se ¼ 1. More than 50 percent of the DMUs(18 nos.), mostly large sized with higher population exhibit DRS and need to strive foroptimization of operational scale and productivity enhancement. Unbundling of watersupply functions may also help in optimal allocation of resources. On the other hand, lessthan 20 percent of the DMUs (six nos. – Gurgaon, Pathankot, Faizabad, Mathura,Rae Bareli and Rampur), mostly small sized with lesser population exhibit IRS and needto focus on resource expansion. Also possibility may be explored to transfer theresources from the DMUs operating at DRS to those operating at IRS within a state.
For the outputs, out of all DMUs, 14 DMUs have slack for net per capita supplywhereas only four DMUs have slack for total revenue receipts and three DMUs have
BIJ18,1
94
Table III.DEA results: efficiencies,
ranking and targets for35 DMUs
North Indianurban water
utilities
95
Table III.
BIJ18,1
96
(con
tinu
ed)
Table IV.DEA results: cost-savings
potential, cost recoveryand slacks for 35 DMUs
North Indianurban water
utilities
97
Table IV.
BIJ18,1
98
slack for percentage water treated. For the inputs, out of all DMUs, 14 DMUs haveslack for UFW whereas three DMUs have slack for total staff and one DMU has slackfor O&M expenditure. Thus, there is a scope for increasing average net per capitawater supply provision by 9.4 percent and reducing UFW by 10.74 percent of theirrespective actual values of all the DMUs due to slacks, in addition to the decrease in allinputs by a factor equal to the efficiency score. However, scope for increase in rest ofthe outputs and decrease in rest of the inputs of all the DMUs is almost negligible onaccount of slacks.
Average of projected net per capita water supply of all DMUs is 121.7 lpcd as againsttheir actual average value of 111.3 lpcd. This would require an additional 381 MLD ofwater to meet the projected demand for all the DMUs.
Agra is found to be the most frequent benchmark DMU (for nine inefficient DMUs)followed by Haldwani and Chandigarh (for seven inefficient DMUs each) (Table III).The inefficient DMUs are of similar size and scale as of their respective efficientbenchmark DMUs (i.e. Agra, Haldwani and Chandigarh).
5.2 Ranking position and number of DMUs under various efficiency rangesAbout 18 DMUs rank first on te scores whereas 12 DMUs rank first on se scores. All eightoverall efficient DMUs rank first on te and se scores. Delhi, Karnal Ambala andJalandhar rank first on te score whereas they rank 35th (last), 34th, 33rd and 31st,respectively, on se score. These four DMUs need to focus on improving their operationalscale in order to be overall efficient. Jhansi, Gorakhpur and Ghaziabad rank first on sescores but they rank 31st, 30th and 22nd, respectively, on te scores. These three DMUsneed to shift their focus towards productivity enhancement and technology upgradationin order to be overall efficient. Pathankot, Mathura and Muzaffarnagar rank close toeach other on te and se scores.
More than 50 percent DMUs (18 nos.) have 100 percent te and only 14 percent DMUs(five nos. – Ludhiana, Faridabad, Gurgaon, Faizabad and Jhansi) have te , 50 percent.About 70 percent of the DMUs have te . 75 percent. Approximately, one-thirdDMUs (11 nos.) have 100 percent se and only two DMUs (Delhi and Karnal) havese , 70 percent and for rest of the 22 DMUs, se ranges between 70 and 100 percent.
5.3 Cost-recovery analysisFaridabad, Gurgaon, Faizabad and Jhansi have higher potential for increasing (by morethan 60 percent) their actual cost recovery (Table IV and Figure 3).
Figure 2.te and se of 35 DMUs
00.10.20.30.40.50.60.70.80.9
11.1
Del
hiK
anpu
rL
uckn
owL
udhi
ana
Var
anas
iA
mba
laFa
rida
bad
Gur
gaon
His
arK
arna
lR
ohta
kA
mri
tsar
Bat
hind
aH
oshi
arpu
rJa
land
har
Mog
aPa
than
kot
Patia
laA
gra
Alig
arh
Alla
haba
dB
arei
llyFa
izab
adG
hazi
abad
Gor
akhp
urH
aldw
ani
Hap
urJh
ansi
Mat
hura
Mor
adab
adM
uzaf
farn
aR
ae B
arel
iR
ampu
rSa
hara
npur
Cha
ndig
arh
Cities
Eff
icie
ncie
s
te se North Indianurban water
utilities
99
Projected annual revenue receipts of all DMUs as obtained from DEA show only0.15 percent increase in the actual annual revenue receipts of all DMUs whereasprojected cost recovery (49.8 percent) of all the DMUs when calculated using projectedexpenditure data shows 5.4 percent increase in actual cost recovery (44.4 percent) of allDMUs. Thus, actual cost recovery can be increased by 5.4 percent (if all inefficientutilities reach efficient frontier) though potential for increasing actual annual revenuereceipts is only by 0.15 percent. Increased cost recovery would help in improvingservice coverage and hence increased consumer satisfaction.
5.4 UFW analysisProjected UFW is maximum for Kanpur and Allahabad (30 percent each) though theyare 100 percent technically efficient and is #5 percent for 17 DMUs (Table IV andFigure 4).
Actual UFW of all utilities is 23.23 percent whereas projected UFW is 18.05 percentof the total water produced of all utilities.
Potential for UFW reduction of all DMUs is 305 MLD and is 22.3 percent of the actualtotal UFW of all DMUs, if all inefficient DMUs reach efficient frontier. Thus, 305 MLD ofadditional water may be made available to the consumers of all DMUs if UFW is brought
Figure 3.Actual vs projectedpercentage cost recovery
0102030405060708090
100110120
Del
hiK
anpu
rL
uckn
owL
udhi
ana
Var
anas
iA
mba
laFa
rida
bad
Gur
gaon
His
arK
arna
lR
ohta
kA
mri
tsar
Bat
hind
aH
oshi
arpu
rJa
land
har
Mog
aPa
than
kot
Patia
laA
gra
Alig
arh
Alla
haba
dB
arei
llyFa
izab
adG
hazi
abad
Gor
akhp
urH
aldw
ani
Hap
urJh
ansi
Mat
hura
Mor
adab
adM
uzaf
farn
aR
ae B
arel
iR
ampu
rSa
hara
npur
Cha
ndig
arh
Cities
%
Actual cost recovery (%)Projected cost recovery(%)
Figure 4.Actual vs projected UFW(in percentage)
0
5
10
15
20
25
30
35
40
45
50
Del
hiK
anpu
rL
uckn
owL
udhi
ana
Var
anas
iA
mba
laFa
rida
bad
Gur
gaon
His
arK
arna
lR
ohta
kA
mri
tsar
Bat
hind
aH
oshi
arpu
rJa
land
har
Mog
aPa
than
kot
Patia
laA
gra
Alig
arh
Alla
haba
dB
arei
llyFa
izab
adG
hazi
abad
Gor
akhp
urH
aldw
ani
Hap
urJh
ansi
Mat
hura
Mor
adab
adM
uzaf
farn
aR
ae B
arel
iR
ampu
rSa
hara
npur
Cha
ndig
arh
Cities
%
Actual UFW (%)Projected UFW (%)
BIJ18,1
100
down to the projected level as obtained from DEA model. This would help in achievingthe target for average net per capita water supply provision to a great extent.
Annual additional revenue receipts potential of all DMUs when percentage UFW isbrought down to projected level (through additional water sale) is INR 109.9 millions/yearand is 6.4 percent of the actual annual revenue receipts of all DMUs and 2.85 percent ofthe total annual expenditure of all DMUs. Thus, reducing the UFW would improveservice coverage and revenue receipts status.
5.5 Staff analysisPotential for reducing staff size of all DMUs is 2,999 nos. and is 8.42 percent of the totalnumber of actual staff of all DMUs (Table III), if all inefficient utilities reach efficientfrontier. This would result in cost saving of INR 156.27 millions/year and is 9.5 percentof the actual annual staff expenditure of all DMUs and 4.1 percent of the total annualexpenditure of all DMUs.
Actual average of staff per 1,000 connections of all DMUs is 7.72 as against projectedaverage of 5.82. Though the analysis shows potential for reducing staff size, averagestaff per 1,000 connections is well within the range (five to ten) obtained frominternational average of developing countries (Kaaya, 1999). Thus, focus may be shiftedtowards reducing staff expenditure and not on staff size at the initial instance.
5.6 O&M expenditure analysisCSP of all DMUs on account of reduction in O&M expenditure, if all inefficient DMUsreach efficient frontier, is INR 253.8 millions/year and is 11.52 percent of the actualannual O&M expenditure of all DMUs and 6.6 percent of the total annual expenditureof all DMUs (Tables III and IV). Cutting down the electricity expenditure would reduceO&M expenditure to a greater extent and therefore suitable measures are required tobe taken in this direction.
Thus, it is evident that there is significant scope for cost savings on account of UFWcontrol, staff rationalization and O&M cost reduction.
5.7 State-wise performance analysisThis section carries out performance analysis for the two union territories (Delhi andChandigarh) and three states (UP, Haryana and Punjab). Calculations of efficienciesand other variables (staff size, UFW, O&M expenditure, etc.) for each of the three states arebased on the respective average values of variables of all the utilities belonging to the stateunder consideration. Out of 35 utilities under consideration, two utilities are of unionterritories (Chandigarh and Delhi), seven utilities belong to Haryana, seven utilities belong toPunjab and rest of the 19 utilities belongs to UP. The analysis highlights the following facts:
. Delhi and Chandigarh have 100 percent te. te of UP, Punjab and Haryana are,respectively, 0.92, 0.81 and 0.67. Thus, Haryana has to relatively focus more onimproving its technical efficiency.
. Chandigarh has 100 percent overall efficiency and Delhi has the least overallefficiency (0.28). Overall, efficiencies of UP, Punjab and Haryana are,respectively, 0.76, 0.78 and 0.51.
. Chandigarh has 100 percent se and Delhi has the least se (0.28). se of UP, Punjab andHaryana are, respectively, 0.93, 0.85 and 0.84. Thus, Delhi has to place major emphasison improving its se which in turn would also improve its overall efficiency.
North Indianurban water
utilities
101
. Delhi exhibits DRS and Chandigarh has 100 percent se. In Haryana, all the utilitiesexcept Gurgaon (with IRS) exhibit DRS. In Punjab, Bhatinda and Moga have100 percent se, Pathankot exhibits IRS and rest of the four utilities exhibit DRS.In UP, eight utilities have 100 percent se, four utilities exhibit IRS and rest of theseven utilities exhibit DRS. Suitable strategies need to be evolved to transfer theresources from utilities operating at DRS to those utilities operating at IRS withinthe state in order to optimize the operational scale.
. CSP[1] is nil for Delhi and Chandigarh, highest for Haryana (58.4 percent), veryless for Punjab (6 percent) and 23.4 percent for UP. Within Haryana, Faridabad,Gurgaon and Ludhiana have very high CSP (.65 percent). Within Punjab,Pathankot and Hoshiarpur have higher CSP (.35 percent) and withinUP, Faizabad, Jhansi and Bareilly have higher CSP (.50 percent).
. Potential for UFW reduction (as a percentage of water produced) is nil for Delhiand Chandigarh and is highest for Haryana (14.59 percent) followed by Punjab(13 percent) and UP (8.2 percent).
. Potential for staff reduction (as a percentage of total number of actual staff) is nilfor Delhi and Chandigarh and is highest for Haryana (54.87 percent) followed byUP (19.9 percent) and Punjab (10.9 percent).
. Potential for reduction in O&M expenditure (as a percentage of total expenditure)is nil for Delhi and Chandigarh and is highest for Haryana (41 percent) followedby UP (12 percent) and Punjab (3 percent).
. Potential for increasing the annual cost recovery is nil for Delhi and Chandigarhand is highest for Haryana (36 percent) followed by UP (23 percent) and Punjab(4.3 percent).
6. ConclusionsPresently, most of the utilities have failed to provide adequate service and connectioncoverage with wide supply demand gap. UFW of most of the utilities are very high alongwith high O&M expenditure and oversized and untrained staff. The range of problemsprevalent in Indian urban water sector clearly establishes the need for benchmarking.A “benchmark” is a reference or measurement standard used for comparison whereas“benchmarking” is the continuous activity of identifying, understanding and adaptingbest practice and processes that will lead to superior performance. Benchmarking can bea useful mechanism to help each utility focus on improvement opportunities bycomparing its practices with the other utilities and accordingly make suitable changes tosome of its procedures and working methods which in turn will lead to continuousimprovement. However, commitment for improvement at the top level is the necessaryprerequisite to realize the benefits of benchmarking.
To fulfill the commitments of the millennium development goals which incorporate thetarget of “reducing by half the proportion of people without sustainable access to safedrinking water by year 2015” (Johanesburg Summit, 2002), governments will need todevelop suitable sustainability-based benchmarking framework for assessing the relativeperformance of utilities which in turn would facilitate efficient practices by water utilitiestowards sustainable water supply services to its consumers. Hardly any benchmarkinginitiative has been undertaken systematically in Indian urban water sector.
BIJ18,1
102
Benchmarking framework developed in the present study therefore serves as animportant milestone in this direction.
Efficiency analysis of the selected 35 urban water utilities using DEA approachshows substantial scope for reduction in UFW, staff size and O&M expenditure andhence, significant potential for cost savings. The study projects the percentage CSP onaccount of reduction in UFW, staff size and O&M expenditure as 2.85, 4.1 and 6.6 percent,respectively, of the total annual expenditure of all DMUs. Such results may be useful forthe water utilities to prioritize their improvement strategy. Though potential foradditional revenue receipts is almost negligible, the study shows potential for increasedcost recovery due to potential for cost savings (or reduced expenditure). The additionalwater available through UFW control (305 MLD) would help in meeting projected percapita water requirement (381 MLD) to a great extent. As average number of staff per1,000 connections is within the international range (five to ten) of developing countries asfound by Kaaya (1999), utilities may place more emphasis on reducing the staffexpenditure than staff downsizing to curtail operating expenses. Possibility needs tobe explored by the utilities to minimize electricity expenses in order to bring down O&Mexpenditure. The study also suggests that 50 percent (14 nos.) of the inefficient utilities(with te . se) need to focus on improving their operational scale whereas about rest50 percent (13 nos.) of the inefficient utilities (with se . te) need to strive for productivityand technology improvement (Table III). Thus, the utilities striving to reach the efficientinput levels as projected by DEA model would eventually lead to sustainable watersupply services.
State/UT-wise performance analysis as regards efficiencies and other variables(staff size, UFW, O&M expenditure, etc.) broadly present their status from best to worst inthe order of Chandigarh, Delhi, Punjab, UP and lastly Haryana. The analysis, thus, showsmaximum scope for improvement in Haryana. Chandigarh exhibits the best performancein spite of the fact that water supply services in Chandigarh are managed by municipalbodies. On the other hand, Haryana exhibits relatively worst performance though watersupply services in Haryana are managed by state government body (Public HealthDepartment). Water supply services in Delhi, Punjab and UP are managed by specialistagencies (autonomous body/water boards) and their performance is in the middle order.
The benchmarking framework developed in the present study would be useful for theregulator or operator of the facility to rank the utilities under their control for theirperformance and accordingly devise suitable incentive mechanism or price capregulation. As water supply is essentially a state subject in India, setting up of anindependent regulatory body at state level will almost certainly become a mandatoryrequirement to execute such benchmarking scheme. The scheme would also help watermanagers to identify suitable benchmarks, estimate performance targets and deviseappropriate measures to remedy underperformance. Governments need to developuniformly acceptable template for data collection and its standardization in order tofacilitate effective implementation of such benchmarking scheme. The results ofbenchmarking exercise, whenever attempted should be made public which in turnwould enable concerned stakeholders to act as pressure groups and facilitate efficientpractices by non-performing utilities. Internal efficiencies of water supply services whenimproved would effect internal savings for greater expansion of service coverage,reduced UFW, reduced electricity consumption and therefore increased revenuegeneration. This would eventually lead to sustainable urban water supply services.
North Indianurban water
utilities
103
The scope of the present analysis could not be widened to incorporate additionalsustainability criteria (such as, services to the poor, tariff design, customer services,revenue functions, etc.) due to limited data availability. Also efficiency analysis did nottake into account the impact of non-controllable environment factors (such astopography, population density, water source, ownership status, etc.). However, there isconsiderable scope for further research on this subject. Urban water utilities of otherdeveloping as well as developed countries may also be included for DEA in order to drawuseful lessons from the international best practices. Also availability of data on resources(materials, manpower, etc.) and their respective prices would enable cost efficiencyanalysis of the utilities. Similar benchmarking studies may be undertaken using othertechniques, such as SFA, regression analysis, etc. and results may be compared with thecurrent analysis to gain greater insights. Efficiency analysis can also be performed usingtime series data to estimate change in productivity levels of the utilities.
Note
1. Cost-saving potential of Haryana, Punjab and UP is calculated as difference between thetotal actual and total projected expenditure divided by total actual expenditure of all theutilities belonging to that state.
References
Aida, K., William, W.C., Jesus, T.P. and Toshiyuki, S. (1998), “Evaluating water supply servicesin Japan with RAM: a range-adjusted measure of inefficiency”, Omega, InternationalJournal of Management Science, Vol. 26 No. 2, pp. 207-32.
Akosa, G., Franceys, R., Barker, P. and Jones, T.W. (1995), “Efficiency of watersupply and sanitation projects in Ghana”, Journal of Infrastructure Systems, Vol. 1 No. 1,pp. 56-65.
Alsharif, K., Feroz, E.H., Klemer, A. and Raab, R. (2008), “Governance of water supply systems inthe Palestinian Territories: a data envelopment analysis approach to the management ofwater resources”, Journal of Environment Management, Vol. 87 No. 1, pp. 80-94.
Banker, R.D., Charnes, A. and Cooper, W.W. (1984), “Some models for estimating technical andscale inefficiencies in data envelopment analysis”, Management Science, Vol. 30 No. 9,pp. 1078-92.
Banker, R.D., Charnes, A., Cooper, W.W., Swarts, J. and Thomas, D.A. (1989), “An introduction todata envelopment analysis with some of its models and their uses”, Research inGovernmental and Nonprofit Accounting, Vol. 5, pp. 125-63.
Berg, S.V. (2006), “Survey of benchmarking methodologies: executive summary”,working paper, World Bank, Public Utility Research Centre, Washington, DC, available at:www.purc.org
Berg, S.V. and Lin, C. (2007), “Consistency in performance rankings: the Peru water sector”,Journal of Applied Economics, Vol. 40 No. 6, pp. 93-805.
Charnes, A., Cooper, W.W. and Rhodes, E. (1978), “Measuring the efficiency of decision makingunits”, European Journal of Operational Research, Vol. 2 No. 6, pp. 429-44.
Coelli, T., Rao, D.S.P. and Battese, G.E. (1998), An Introduction to Efficiency and ProductivityAnalysis, Kluwer, London.
Coelli, T.J., Estache, A., Perelman, S. and Trujillo, L. (2003), A Primer on Efficiency Measurementfor Utilities and Transport Regulators, The World Bank, Washington, DC.
BIJ18,1
104
Jamasb, T. and Pollitt, M. (2001), “Benchmarking and regulation: international electricityexperience”, Utilities Policy, Vol. 9, pp. 107-30.
Johanesburg Summit (2002), “Johanesburg Summit – Secretary General calls for global action onwater issues”, available at: www.johanesburgsummit.org/html/media_info/pressrelease_prep2/global_action_water_2103.pdf (accessed 2002).
Kaaya, J.A. (1999), “Experience of autonomous water and sewerage authorities in Tanzania”,Proc. 25th WEDC Conference, Addis Ababa, Ethiopia, 30 August-3 September.
Kapadia, K. (2005), “Sustainable water supply in urban development: case studies of Gurgaon,Dwarka and Greater Noida”, Journal of Indian Buildings Congress ( IBC ), Vol. 12 No. 1.
Kulshrestha, M. (2005), “Performance assessment and efficiency evaluation for the urban wateroperations of Indian utilities”, PhD thesis, Indian Institute of Technology, Delhi.
Lambert, D., Dichev, D. and Raffiee, K. (1993), “Ownership and sources of inefficiency inprovision of water services”, Water Resources Research, Vol. 29, pp. 1573-8.
Lin, C. (2005), “Incorporating service quality & prospects of benchmarking: evidence from thePeru water sector”, Utilities Policy, Vol. 13, pp. 230-9.
Mugisha, S. (2007), “Effects of incentive applications on technical efficiencies: empirical evidencefrom Ugandan water utilities”, Utilities Policy, Vol. 15 No. 4, pp. 225-33.
NIUA Report (2005), “Status of water supply, sanitation and solid waste management in urbanareas for year 1999”, Main Report & Statistical Volume I (Water Supply & Water Tariff),MoUD, Government of India, New Delhi.
Patwardhan, S.S. (1993), “Financing urban water supply scheme”, Journal of IWWA,October-December.
Raghupathi, P.U. and Foster, V. (2002), “A scorecard for India : Paper 2”, Water Tariff &Subsidies in South Asia, December.
Renzetti, S. and Dupont, D. (2007), “Measuring the technical efficiency of municipal watersuppliers: the role of environmental factors”, Journal of Land Economics, Vol. 85 No. 4,pp. 627-36.
Singh, M.R., Upadhyay, V. and Mittal, A.K. (2005), “Urban water tariff structure & cost recoveryopportunities in India”, Water Science and Technology, Vol. 52 No. 12, pp. 43-51.
Thanassoulis, E. (2000), “The use of data envelopment analysis in the regulation of UK waterutilities: water distribution”, European Journal of Operational Research, Vol. 126,pp. 436-53.
Tupper, H.C. and Resende, M. (2004), “Efficiency and regulatory issues in the Brazilian water andsewage sector: an empirical study”, Utilities Policy, Vol. 12, pp. 29-40.
Tynan, N. and Kingdom, B. (2002), “A water scorecard: setting performance targets for waterutilities”, Public Policy for the Private Sector, Group Private Sector and InfrastructureNetwork, Public Policy Journal, Note No. 242, The World Bank, Washington, DC.
Yepes, G. and Dianderas, A. (1996), Indicators, Water and Waste Water Utilities, 2nd ed.,Water and Sanitation Division of the Transportation, Water and Urban DevelopmentDepartment, TWUWS, The World Bank, Washington, DC (published informally byInternational Bank of Reconstruction and Development).
Zeleny, M. (1982), Multiple Criteria Decision Making, McGraw-Hill, New York, NY.
About the authorsMamata R. Singh is a Master of Engineering (Building Engineering and Management) andsubmitted a PhD thesis in July 2008. She is a Research Scholar at the Indian Institute
North Indianurban water
utilities
105
of Technology-Delhi, New Delhi, India and a Lecturer at the Directorate of Training and TechnicalEducation, New Delhi, India. Her areas of specialization include urban infrastructure (water),project management and quality management systems (including ISO-9000 series).Mamata R. Singh is the corresponding author and can be contacted at: [email protected]
Atul K. Mittal holds a PhD (in Waste Water). He is Associate Professor, EnvironmentalEngineering, in the Department of Civil Engineering at the Indian Institute of Technology-Delhi,New Delhi, India. His areas of specialization include water and wastewater design and treatment,urban infrastructure, environmental engineering and management.
V. Upadhyay holds a PhD in Economics. He is Professor in the Department of Humanities andSocial Sciences, Indian Institute of Technology-Delhi, New Delhi, India. His areas ofspecialization include development economics, economic theory and econometrics.
To purchase reprints of this article please e-mail: [email protected] visit our web site for further details: www.emeraldinsight.com/reprints
BIJ18,1
106