320 4-side seals user manual

8/13/2019 320 4-Side Seals User Manual

1/38

CONTENTS

Foreword

Chapter1 Safety Information

1.1Safety Information and Signs.....................................................3

1.2 Install Site and Power Supply....................................................4

Chapter2 Parameter

2.1 Packaging machine parameter..................................................4

2.2 Options.......................................................................................5

Chapter3 Installation

3.1 eneral Installation !rawing......................................................"

3.2 #achine Spare Parts and !escription........................................$

3.2.1 Preparation........................................................................8

3.2.2 Film installation..................................................................8

3.2.3 Film installation schematic drawing..................................9

3.2.4 Photocell ye and Sensiti!ity "d#$stment........................1%

Chapter4 &perating F$nction4.1 %ouch Screen Structure and &unction !escription..................11

4.2 %ouch Screen !etail !escription...............................................11

4.2.1 Contact $s.........................................................................12

4.2.2 'ang$age..........................................................................12

4.2.3 (omepage........................................................................13

4.2.4 "$tomatic.........................................................................13

4.2.) *an$al..............................................................................14

4.2.+ F$nction............................................................................1+

4.2., Parameter -12/................................................................1,

4.2.8 Parameter -22/................................................................19

4.2.9 "larm ...............................................................................2%

Chapter) (eater Printer

5.1 'eat Printer (i))on..................................................................22

5.2 Parameter..................................................................................22

5.3 Structure...................................................................................22

5.4. Installation...............................................................................23

5.4.1 Install (i))on...................................................................23

5.4.2 *d+ust (i))on ,idth........................................................24

5.4.3 -ode um)er (eplacement.............................................245.4.4(i))on Step /alue ad+ustment 0factory Setting is

Single...........................................................................25

Chapter + Common Fa$lts and 0reatment................................................2+

Chapter , $ipment *aintenance

$.1 Spare Parts (eplacement.........................................................2

$.2 #aintenance..............................................................................2

Chapter 8 "ccessory 'ists........................................................................29


2/38

OREWORD0han yo$ for choosing o$r F$ll "$tomatic ertical Formfilmseal *achine5 in order to

ha!e a 6etter nowledge of $nderstanding and operating to the machine5 please read the

7ser *an$al caref$lly 6efore $sing it.

CF32% F$ll "$tomatic ertical Formfilmseal *achine is easy and safe to operate5 and

with strong practically5 high economic ret$rns. 0he operating way and str$ct$re of the

machine may different according to the prod$ct and pacaging material. Please reference

to appendi in order to ha!e a thoro$gh $nderstanding with the special points.

CF32% is designed 6asing on the high le!el safe reg$lation5 will not 6e damaged or

6roen down e!en when operating careless. :hen fa$lts are happened5 please reference

to the 7ser *an$al or contact o$r technician to adopt some necessary and reasona6le

meas$res to operate the machine effecti!ely.:e ha!e the caref$lly chec and test with all parts and electric circ$it of the machine

6efore efactory. "ny pro6lems please contact $s or o$r agents.

In order to operating the machine smoothly5 and a!oiding riss5 please o6ser!e the safety

information strictly.

For p$rpose of a!oiding riss5 please strictly comply with en!ironmental safety reg$lation.

"ll right reser!ed to F&S("; "&P"C< P"C


3/38

Chart 1 Safety Information

1.1 Safetyinformation and signs

%here are signs in the left of this page that indicating danger9 warning9 caution9 note. Make sure to have

thorough understanding with the foowing !ontents in order to running ma!hine safey

and !orre!ty"

#he !arefu o$eration of your ma!hine de$ends on everyone who o$erates% maintains%

ad&usts or works near it" 'ease read and understand these danger% warning and !aution

noti!es" (e sure you understand the foowing signa words whi!h wi )e seen throughout

this manua"

D*+,ER*erts you to an immediate ha-ard% it wi aways resut in severe $ersona in&ury and

$ossi)e death% if not avoided"

W*RMI+,


4/38

*erts you to an immediate ha-ard% it wi resut in a serious $ersona in&ury% or $ossi)e

death in some !ases% if not avoided"

C*.#IO+'oints out a $ro$er use wi avoid damage to the ma!hine% and wi e/tend ife of

ma!hine $arts"

+O#E

01 3456Work $ ease kee$ out6


5/38

Suggest how to use or ad&ust the ma!hine for )est $rodu!t resuts"

1.2 Installation site and supply power

17 Choose suita)e site for ma!hine instaation"

89#he stru!ture must su$$ort the ma!hine and $rodu!tion a!tivities"

:9Suffi!ient iumination for the daiy o$eration and maintenan!e as we as the

aftersae servi!e"

; 9 Do not $ut ma!hine in the !om)usti)e $a!ement or near any !om)usti)e ore/$osive materias"


6/38

2.2 Options

Cha$ter : Instaation3.1 eneral Installation !rawing.

*# &;-%IO

14 heads com)ination weigher ;sed with packaging machine for high speed and precision measuring.

1: heads com)ination weigher ;sed with packaging machine9 for high precision measuring.

ucket lifting con/eyor ;sed with packaging machine and /olumetric cups de/ice9 for feedingautomatically.

= type )ucket con/eyor ;sed with packaging machine9 suita)le to artificial feeding fragile materials.

&inished product con/eyor ;sed with packaging machine9 for outputting automatically.

&inished product turnta)le ;sed with finish product con/eyor9 for easy selecting and packing.

Spiral con/eyor ;sed with *uger filler de/ice9 for feeding powder materials automatically.


7/38

3.2 Machine Spare parts and description


8/38


9/38

:"8"1 're$aration17 Conne!t ee!tri!ity% and toset /ertical and hori@ontal heating temperature according to film materials.

87-onnect the P 1: compressed air pipe to the entrance of diad at the )ack of packaging machine.

:"8"8 im Instaation1 Pull down the laminated )oard9 and then take off flei)le ais.

2 Aoad the film roll.


10/38

3 #ighten the s!rew to o!k the fim.


11/38


12/38

:"8": im Instaation and S!hemati! Drawing:"8"; Photocell eye and sensitivity adustmentotice6 It is used for detecting color code and determining the place to cut off. >ecause the film that clients use

may different from our factory uses for testing9 so under the efactory setting9 the electric eye may miss to detect

the photocell9 therefore it is necessary to reset the sensiti/ity.

17 oosen o!king hande of ee!tri! eye% move the ray to aim at the )a!kground of fim

the white side7" Shown as $i!ture :


13/38

PictureQ 3 987 Set )ackground of film6 (otate the kno) on electric eye toward anticlockwise till the end9 then the indicator

light will turn off. *fter that rotate the kno) slowly toward clockwise9 then the indicator light will change from

dark to light9 +ust this moment its sensiti/ity is the strongest. (otate the kno) toward clockwise to 173 circle is the

)est situation.

:7 !etect of photocell6 Pull the film forward9 let the ray of electric eye aim at the photocell 0the )lack point9

when the indictor light change from dark to light9 it means that the electric eye is functioning. %he )ag length

should )e set a)o/e BC2:mm.

f i l m p h o t o c e l l


14/38

Cha$ter ; O$erating un!tion

!.1 "ouch screen structure and function description

%he touch screen consists of eight functions as following.

1 9 -ontact us%here are contact information of our company9 including telephone9 fa9 email and we)site.

2 9 Aanguage%here are 2 choices9 TU -'IS U and VTU AIS' U .*nd also

time and setting display.

3 9 'omepage%here are *;%O#*%I- U #*;*A U &;-%IO U P*(*#%(U

*A*(#U -O%*-% ;S U A*;* U. *nd also time and setting display.

4 9 *utomatic%here are start and stop )uttons for &IAA >* U and %S% U 9hotkey for #*D

O >* U 9display of P*-DI SP! U and &IAAI -O;%(U (S% U .

) 9 #anual%here are start and stop )uttons for !AI* U O-

&IAA U * A%' U

SP! U&IA# P;AA !A*EU S(


15/38

PictureQ1G-G9

4.2.1 -ontact usthere are address9 telephone9 fa9 email9 we)site for you to contact with us someday9

press %(Uto go on. Shown as Picture 1G-G.


16/38

Pict$reQ 2ECE 9

4.2.2 'ang$age0here are C(I;S U T U and ;='IS( U 5and also

@ear*onth >ay0ime Udisplay. Shown as Picture 2G-G.

9 Chinese !ersion:hen t$rn on the machine and press or C(I;S U 5 it enters net

page-shown as pict$re 3EC/.If yo$ want to change it5 press '";=7"= U to pre!io$s page

shown as pict$re 2ECE5 and press VTU or ;='IS( U .


17/38

Pict$reQ 3EC9

X9 nglish /ersion:hen t$rn on the machine and press VTU or AIS' U to go on5

it will show net page-shown as pict$re 4EC/.If yo$ want to change it5 press A*;* U to

pre!io$s page shown as pict$re 2ECE5 and press TU or C(I;S U .


18/38

Pict$reQ 4EC9

4.2.3 'omepage%here are *;%O#*%I-U #*;*A U &;-%IO UP*(*#%(U

*A*(#U -O%*-% ;S U A*;* U 9also @ear*onth>ay 0ime U display and

setting. "s is shown in Pict$re -4C/

0ips *t the )ottom of e/ery page9 there are )uttons for 'O# P* U *;%O#*%I- U

#*;*A U &;-%IO UP*(*#%(U *A*(#U . Press any of the a)o/e )uttons9 and then

it will go to the corresponding page directly. %hey will enter pages as shown in Q 3EC 9GQ 4EC 9GQ )

EC9GQ +EC 9GQ ,EC 9GQ 8EC 9GQ 9EC 9

4.2.4 *utomaticPress *;%O#*%I-U 9it will enter net page9 shown as picture 5G-. %here are start and

stop )uttons for &IAA >* U %S% UG hotkey of #*D O >* UP*-DI SP! U

>* -O;%( U (S% U .*fter setting all parameters9 when press *;%O#*%I- U 9 the

machine will operate continuously at preset speed.


19/38

Pict$reQ )EC9

9 &IAA >*It is used with measuring system. ,hen packaging machine is connecting with measuring

system9 press S%*(% U 9E5 signal of PA- will keep outputting signal9 and dri/e other feeding system to

work together.E$ signal will send signal at preset speed ask for feeding. ,ith this function9 the machine can fill

and seal continuously. Press S%OP U or mergency switch to stop it.

X9 %S%It is only used for testing packaging machine. Press StartU 9packaging machine will make

empty )ag at preset )ag length and speed and other parameters. Press StopU or emergency switch to stop it.

Y9 P*-DI SP!It shows the actual packing speed of machine. It can not )e changed o/er here. Eou

can change it through setting P*(*#%(U 0page 172. *s is shown in Picture Q 8EC 9 .

Z9 #*D O >*It is used for making one empty )ag. Press #*D O >* U 9machine will

make an empty )ag at preset )ag length and other parameters. *fter it stops9 you can press the )utton again to

make one more )ag if necessary.


20/38

[9 FI''I;= "= and "= C&7;0AIt shows the num)er of packed )ags from start &IAA >* U

or %S% U until it stops.

+ / (S%It reset the num)er of >* -O;%( U 9 &IAAI -O;%(U .

4.2.) *an$alPress #*;*A U 9it enters net page0shown in picture "G- . %here are functionswitches !AI* U O- &IAA U 'O(I. S*A U


21/38

X9 #*D O >*Press it9 it makes one empty )ag at preset parameters. Press the )utton again if

necessary.

Y9 O- &IAAPress O- &IAA U9PA- sends E$ signal to measuring system to fill product once at

preset parameter. *t the same time9 the other functions donHt work. Press the )utton again if

necessary.

Z9 (&AI. S"'It is used for closing and opening hori@ontal sealing +aws. ,hen the machine is in stand)y

condition9 press 'O(I. S*A -AOSU 9PA- sends E3 signal to electromagnetic /al/e and cylinder9 making

hori@ontal sealing +aws close. ,hen press 'O(I.S*A OP U or emergency switch9 hori@ontal sealing

+aws will open. Other functions donHt work.

[9 U 5 P'C sends @4 signal to dri!e

electromagnetic !al!e and cylinder5 maing g$sset o$tstretch. Press =7SS0 7;0A"> U or

emergency switch5 g$sset will withdraw. &ther f$nctions dont wor.

_9 F>I;=It is used for feeding product when connecting with meas$ringsystem. ,hen machine is in

stand)y condition9 feeding system doesnHt work. Press S%*(% U 9PA- sends E5 signal to dri/e

intermediate relay9 making feeding system supply product for measuring system. ,hen it is fill with product9

feeding system stops working automatically. Press StopUor emergency switch9 feeding system stops. Other

functions donHt work.

4.2.+ &;-%IOPress &;-%IO U 9it will enter net page 0shown as picture $G- .%here are

E #*(D U &IAA *I(U ;SS% U &!I -O;%( U .So that user can choose

multiple or single package freely.


22/38

Pict$reQ ,EC9

9 E #*(DIt is used for tracking photocell on the film to identify )ag length 0specific )ag length is

related to the design of the using film.. Press O&&U 9it turns to O U condition. Please reference to

P*(*#%(U 0172 to know how to set )ag length. Press O U 9it turns to O&&U condition.

X9 &IAA *I(It applies to fill air or nitrogen into )ag for )reakageproof or preser/ing freshness . Press

O&& U 9it turns to O U condition9 the machine will fill air or nitrogen into

)ag0Please reference to P*(*#%(U 0272 to know how to set parameter of flush

delay.. >e sure that there is enough air or nitrogen. Please ad+ust the throttle /al/es to meet

different saturations. Press O U 9it turns to O&& U condition9 in this case the

packaged )ag is filled with natural air.

Y9 ;SS%It applies to making )lock )ottom )ag or stand pillow )ag. ,hen with gusset de/ice0optional

de/ice9 press O&&U 9it turns to O U condition. In this case9 the )ag type is )lock )ottom )ag0Pleasereference to P*(*#%(U 0272 to know how to set parameter of gusset. ,hen press O U 9it turns to

O&&U condition9 in this case the )ag type is pillow )ag.


23/38

Z9 F>I;= C&7;0AIt is $sed for controlling to feed once or twice5 and the defa$lt !al$e

is &;C F>I;= U .:hen material weight is in ecess of metering systems maim$m range5 yo$

can choose feeding twice. Press &;C F>I;= U5 it t$rns to 0:IC F>I;=U 5 it means

meas$ring system feeding twice5 and the machine pacing once.

4.2., P*(*#%( 0172 Press P*(*#%(U 9it enters net page0shown as picture -.%here are

>* A%' U SP! U &IA# P;AA !A*E U S(


24/38

Pict$reQ 9EC9

1/ P(O(*# O. It is used for storing different specifications. !ifferent products re?uire different

parameters. *ll programs are preset at =(O )efore efactory. *s long as the program no. is set up9 you can

switch functions through pressing the program no. directly.

(ange 60 1

2/% ,I'% 0gIt shows the net weight of current program o.9 so that users can get to know the current

packaging specification. Eou can choose to set the parameter manually or not. 'owe/er the net weight here can

not )e seen as actual packaging weight. %he specific packaging weight is su)+ect to the measuring system.

(ange 6 Q%E99999 g

3/ "= ';=0(It is $sed for setting 6ag length thro$gh two patterns5 fied 6ag length and tracing

6ag length. 7nder the order of fied 6ag length5 it is ad!ised to set the parameter as 2%mm. Foreample5 if 6ag length is 2%%mm5 then parameter sho$ld 6e set at 2%%2%G18%mm. :e change

parameter of ser!o motor dri!er 6efore efactory in case of slipping5 which will ca$se a6o$t 2%mm

longer than preset. Please set 2%mm shorter or else according act$al sit$ation $ntil it is accepta6le.


25/38

7nder the order of tracing 6ag length5 the parameter sho$ld 6e set as H2%mm.For eample5 if

distance 6etween two color codes is 2%%mm5 the 6ag length sho$ld 6e set at 2%%H2%mm or more. 0he

f$nction is $sed for tracing eye mar.

Aange ?- 1%)%%mm/ Aecommend ?- )%2%%mm/

4/ SP!It is used for setting package speed. ,hen testing9 the machine will work at preset speed. ,hen

filling package with measuring system9 the package speed is su)+ect to the actual com)inati/e speed.(ange 60 1 )ags7min (ecommend 60 1:55 )ags7min

)/ 'O(I. S*A !A*EIt is used for outputting hori@ontal sealing signal. Eou can set the parameter here to

a/oid crashing product. %he smaller you set the slower the machine pack.

(ange6 0:.::. S (ecommend6 0:.:5:.15 S

+/ 'O(I. S*A %I#It is used for setting hori@ontal sealing time. Eou can reduce temperature to prolong

sealing time or raise temperature to reduce sealing time to meet different demands.

(ange6 0:.::. S (ecommend6 0:.5:1.5: S

$ 9


26/38

Pict$reQ ,ECE2 9

1/ P(O(*# O. It is used for storing different packaging specifications. !ifferent products re?uire

different parameters. *ll programs are preset at =(O )efore efactory. *s long as the program no. is set up9 you

can switch functions through pressing the program no. directly.

(ange6 011:

2/ % ,I'% 0gIt shows the net weight of current program o.9 so that the user can get to know the

current packaging specification. Eou can choose to set the parameter manually or not. >ut the parameter here can

not )e seen as actual packaging weight. %he specific packaging weight is su)+ect to the measuring system.

Aange? -%9999/ g

3/ &A;S' !A*EIt is used for controlling the saturation inside the )ag. ;sually speaking9 keep the distance)etween two hori@ontal sealing +aws at 5mm is the )est. %oo soon or too late may cause underinflated.

(ange6 0:.::. S (ecommend 0:.::.15 S


27/38

4 &A;S'I %I#It is used for controlling the saturation inside the )ag. %oo soon or too late may cause

underinflated or e/en )lowed out of crashing product.

(ange6 0:.::. S (ecommend6 0:.1::.15 S

5 P(I%I !A*EIt is used for controlling the printer. %oo soon or too late to print may cause printing

o)scurely.

(ange6 0:.::. S (ecommend6 0:.:::.15 S

" P(I%I %I#It is used for controlling the printer.

(ange6 0:.::. S (ecommend6 0:.15:.2: S

,/ S(


28/38

Pict$reQ 8EC9

*A*(#It is the main switch of all alarms9 when it is O&&U 9 all options )elow are in/alid. ,hen it is

O U 9all options )elow are /alid.

1 'O(I. * Uor %S%I U 9 it will go to

another page and showing -'-DI 'O(I. >O SES%# O(#*A,hen it is O U9when print ri))on is run out9 please press

&IAAI >* Uor %S%I U9it will go to another page showing that P(I% (I>>O IS (;

O;% U .Press (S% U to ?uit9 and replace with new print ri))on. ,hen it is O&& U 9the

function is in/alid.

3/ !AI


29/38

normally. ,hen it is O&&U 9the function is in/alid.

4 &IA# P;AA SES%# O(#*A,hen it is O U 9when the film is run out9 please press

&IAAI >* U or %S%I U 9it will go to another page showing that &IA# (OAA (;

O;% U .Press (S% U to ?uit9 and replace with new film roll. ,hen it is O&&U9the function is

in/alid.

)/ S%O( P(O!;-% SES%# O(#*A,hen it is O U 9if it detects that the product in the store is

not enough9 please press &IAAI >* U or %S%I U 9it will go to another page showing that

P(O!;-% (; O;% U .Press (S% U to ?uit9 and then fill product in store. ,hen it is

O&&U 9the function is in/alid.

" A*SS !OO( -OAS! -O#PA%AE ,hen press &IAA >* Uor %S% U9 if the glass door

is not close completely9 it will go to another page showing -AOS %' A*SS !OO( PA*SU .Press

any key to ?uit9 and close the glass door9 the machine will work normally.

$ A-%(I- !OO( -AOS! -O#PA%AE,hen press &IAA >* U or %S% U 9 if the

electric door is not close completely9 it will go to another page showing -AOS %' A-%(I- !OO(

PA*S U .Press any key to ?uit9 after the glass door is close9 the machine will work normally.

#(-E S,I%-' (PA*-#% S%*%,hen press &IAA >* U or %S% U 9if

emergency switch is locked9 it will go to another page showing (S% #(-E S,I%-'

PA*S U .Press any key to ?uit9 and reset emergency switch.


30/38

-hapter 5 'eat Printer

5.1 'eater printer ri))on

%he machine uses heater printer ri))on9 and the standard ri))onHs inner diameter is 1 inch9 #a width is 35mm9

Aength is 1::m. %he width and color is according to your re?uirement

#.2. Parameter

1 Speed6 #a 15:times7min 0-ontrolled )y host

2 Print area6 Single row ma 4J35mm2. It can put 15 characters on printer.

3 Print area6 !ou)le row ma 1:J35mm2. It can put 3: characters on printer

4 um)er9 nglish9 -hinese can )e accepted.

5 (i))on ma width6 35mm

" Power supply6 Single phase 22:


31/38

PictureQ 1 9

5.4 Installation

1 9 Install ri))on

&irst9 loosen the nut on ri))on aisQ !o not ha/e to take off the nut 9 9 and take off pleiglass. Secondly9 input

the heater ri))on9 and put )ack the )affle 0the )affle should close to the ri))on side. *nd finally9 fi ri))on

according to instructed direction.

Aoosen nut on ais9 and take off the mo/a)le )affle9 then input the empty tu)e9 on which stick a )it ri))on

according to the instructed direction. *nd then put )ack the mo/a)le )affle9 and finally tighten the nut.

*ttention6 %he ink

0rough side of the

ri))on should

toward the material

which is to )e

printed.


32/38

PictureQ 2 9

2 *d+ust ri))on width

*d+ust the location of

eternal circlip plier9 and

let internal circlip plier

stay. *S shown in Picture

03. #ake sure the

alignment )etween internal

plier and fied )affle 0lay

the pleiglass. *d+ust the

eternal plier to keep the

distance )etween the )oth

)affles at 1mm wider thanri))on width.


33/38

PictureQ 3 9

3 -ode num)er replacement

Push inward the handle on printer lightly Q 1.) N 2mm 9 and rotate :Kat the same time9 and then take off

printer head. Shown as Picture 04. Aay the code num)er flatly on the work)ench. Aoosen the nut on the printer

head9 now you can replace or uninstall num)er code. ;sing alcohol to clean the dust and using copper )rush toclean the ink. #ake sure those num)er codes are keep alignment and clean9 do not knock them with metal.

%hen tighten the nut9 install the printer head as the in/erse installation9 push the handle inward lightly

01.5L2mm.

PictureQ 4 9

4 9 (i))on step

/alue ad+ustment.

"s shown in

pict$re -)/5

with the

lowing of the

printer head5

the step gear

will t$rn 6ac

to its position

$nder theaction of step

spring. *d+ust

ri))on step /al/e

through the

)utterflyshaped

nut which is at the )ack of the host. #o/e it up and down to change the /i)ration of the step gear. For the

p$rpose of sa!ing ri66on5 it is ad!ised to eep the distance 6etween the two code n$m6ers at

1mm. Finally5 tighten the 6$tterflyshaped n$t after ad#$stment.


34/38

PictureQ 5 9

-hapter " -ommon &aults and %reatments


35/38

%he film can

not )e cut off.

1. -utter is damaged.

2. %he two sealing +aws are not matched

well.

3. -utter delay and cutting time donHt

match well

1. Sharpen the cutter or replace with a new

one.

2. *d+ust symmetry of the sealing +awsM let the

cutter fit the groo/e properly.

3. (eset the parameter of cutter delay and

cutting time.

ear motordoesnHt run or

it keeps

1. -apacitor for starting gear motor isdamaged.

2. Solid state relay or intermediate relay

1. (eplace capacitor of same model.2. (eplace solid state relay or intermediate

relay.

&ault (eason %reatment

circuit)reakertripping

1. Insulated ca)le is damaged and contactswith frame of machine.

2. 'ori@ontal and /ertical seal heatingsystem uses the 22:< power.

1. -heck the ca)le and replace the warn one.2. (eplace with new sealing heater9 and check

other electric components.

o display intouch screen.

1. o output from 24< !- powertransformer.2. &use of touch screen is )urn out.

1. -heck the fuse or replace power transformerof machine.2. (eplace the fuse of touch screen or touchscreen itself.

ut whenmachine is off9 the ca)le is connecta)le.,hen it is working9 the ca)le isdisconnecting.

(eplace ca)le that connecting sealing with

heater solid state relay.

Sealing effect isnot good9 ore/en eist airleakage.

1. %emperature of sealing +aws it too low.2. %ime of sealing is too short.3. %here are some other things in sealing+aws.4. %he two sealing +aws match not well.5. *ir pressure is too low.". &ilm ?uality is not good.

1. Increase temperature of /ertical or hori@ontalsealing +aws.2. tend sealing time.3. -lean sealing +aws )y copper )rush.4. *d+ust two sealing +aws to make them connectwith each other tightly.5. Increase air pressure. *)o/e "D pressure is)etter.". (eplace film.

!e/iation of)ag length istoo high.

1. Pulling )elt does not run enough.2. %he setting )ag length is shorter than

the distance )etween the two colorcodes on the film.

3. Sensiti/ity of photocell eye is not setcorrectly.

4. %here is stain or pattern in the colorcode.

5. %he laminated )oard under photocelleye is damaged so that it can not detect

the color code correctly.". ye mark and ray shifts during the

operation of eye mark.

1. Switch off tracking function of photocell eye.#ake 5 empty )ags continuously to check )aglength 0Aonger than 1:##. -lean the pulling)elt until it is normal.2. If distance )etween two color codes is B9 setthe )ag length parameter as BC5:mm.3. (eference to photocell eye ad+ustmentmanual.4. (eplace the film.5. *d+ust the laminated )oard to keep the

distance as it can +ust pass a piece of film.". *d+ust the location of photocell eye and colorcode.


36/38

running when

it is on.

of controlling gear motor is

damaged.

3. ear motor is damaged.

3. (eplace gear motor.

Pulling )elt

and )ucket

con/eyor

doesnHt work.

1. Ser/o motor or ser/o dri/er sends

alarm sign.

2. %ransducer alarming or o/erload

thermal error.

1. Switch off host9 and restart one minute later.

-heck the alarm signal code display on ser/o

dri/er9 or inform us.

2. Switch off host9 and restart one minute later.-heck the alarm signal code on transducer9 or

inform us.

%he machine

doesnHt work

when it is on.

1. %he emergency switch is off.

2. Parameters are not set correctly.

3. PA- error.

1. (eset emergency switch.

2. (eset parameters.

3. (eplace PA-.

Print illegi)ly

or airleakage

at printing

place.

1. Setting temperature is inappropriate

so that the ri))on can not )e printed.

2. %he distance )etween printer and

laminated )oard is o/erlarge.3. %emperature or air pressure of printer

is too high.

4. (i))on pro)lem.

1. (ise the temperature.

2. *d+ust the distance )etween printer and

laminated )oard9 making it touch the film

eactly.3. Aower the temperature9 or decrease the

cylinder pressure.

4. (eplace ri))on.

-rash product 1. %ime of feeding is inappropriate.

2. Packaging speed is too fast9 and

product is too light.

3. Preset )ag length is too short.

4. Packaging machine parameter and

weigher parameter donHt match

correctly.

1. (eset feeding time.

2. Aessen packaging speed.

3. (eset )ag length.

4. (eset parameter of packaging machine and

weigher.

-hapter $ #aintenance

@"1 S$are $arts re$a!ement17 If $uing )et is si$$ing or damaged% $ease re$a!e with the new one" Firsty remove

the e/terna !overing% oosen the M18 s!rew and rotate M> nut% et the a/is of drove

whee move down% take off the $uing )et% and re$a!e with the new one% finay fasten

the s!rew"

*ttentionA Don`t ad&ust the $uing )et too tight or too oose"

87 CutterA oosen 8$!s M< nuts% and take off od !utter" *ttention not to )e s!aded

when the verti!a &aws are heating" *nd re$a!e with the new one" Make sure to kee$

aignment of the two !utters"

:7 When ri))on is run out% remove the od ri))on from $rinter% and re$a!e with new one"

Referen!e to 'rinter Manua7


37/38

@"8 Maintenan!e

17 ee$ the ma!hine running without oad for :=< mins )efore o$erates"

87 Che!k the surfa!e oi of diad to make sure it is a)ove 1: )efore o$erates" If it is

under 1:% add 8B $ure engine oi unti it is a)ove 1:"

:7 (efore ma!hine starts to work% add 8B $ure oi to the moving $arts of it"

;7 #ake off the fim after work in !ase of )ending down the a/is"


38/38

320 4-side seals user manual

Documents