3010 3011 - linear motion & power transmission supplies section combined... · description this...
TRANSCRIPT
DescriptionThis gear unit is designed to be used for many different mechanical drive solutions. Applications of adjustment for: steppless height-adjustable desks, umbrellas, adjustable windows, partition walls, etc. and any kind of linear adjustment in the industrial machinery industry.
Special features ▪ Ratio 1.3:1 ▪ Glass fibre reinforced plastic housing ▪ Hardened steel gear cogs ▪ 1200 N load ▪ Output spindle for push force only
Customer specificBecause of the modular design it is possible to meet special customer requirements even for small quantities. The gear is available in various lengths and with various mounting brackets. Up to 4 input wheels are possible. The gear can be also driven from above.
CautionPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
30103011
3010.75-02/20160906
Support tube
Spindle
Table top
Mounting adapter
Input hex 6 mm
Bevel gear 3010/3011
3010.75-02/20160906
Technical Data
Model 3010 3011
Ratio 1.3:1 1.3:1
Input hex 6 mm hex 6 mm
Number of inputs max. 4 max. 4
Type of spindle Tr14x3 RH Tr14x3 LH
Stroke max. retracted height -99 mm retracted height -99 mm
Max. lifting force 1200 N 1200 N
Max. drive torque 3 Nm 3 Nm
Output spindleInputs
Retracted length E to customer specification
Stroke H to customer specification
Adapter to customer specification 4 mounting holes M5
Y
29.5
16
square 22
24 11
44
X
View X (Rotation stop)
View Y
number and position of inputs to customer specification
30
30 16.5
9M
6
hex 6
DescriptionThis gear unit is designed to be used for many different mechanical drive solutions. Applications of adjustment for: Steppless height-adjustable desks, umbrellas, adjustable windows, partition walls, etc. and any kind of linear adjustment in the industrial machinery industry.
Special features ▪ Ratio 1:1; 1.3:1 ▪ Glass fibre reinforced plastic housing at
angle 120° or 135° ▪ Hardened steel gear cogs ▪ 1200 N load capacity
▪ Output spindle for push force only
Customer specificBecause of the modular design it is possible to meet special customer requirements even for small quantities. The gear is available in various lengths and with various mounting brackets. Different input angles are available even in small quantities.
CautionPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
3014
3014.75-02/20151009
Mounting adapter
Support tube
Spindle
Input hex 6 mm
Table top
Bevel gear 3014
3014.75-02/20151009
Technical Data
Model 3014
Ratio 1:1; 1.3:1
Input hex 6 mm
Number of inputs 2
Type of spindle Tr14x3 RH
Stroke max. retracted length -99 mm
Max. lifting force 1200 N
Max. drive torque 3 Nm
Inputs Spindle
Stroke H to customer specification
Retracted length E to customer specification
square 22
24 11
44
Y X
View Y
Number and position of inputs to customer specification
hex 6
M6
9
16.5
View X (Rotation stop)
29.5
Adapter to customer specification 4 mounting holes M5
16
120°
Angle to customer specification
DescriptionThis gear unit is designed to be used for many different mechanical drive solutions. Applications of adjustment for: steppless height-adjustable desks, umbrella’s, adjustable windows, partition walls, etc. and any kind of linear adjustment in the industrial machinery industry.
Special features ▪ very slim size, square 25.8 ▪ Ratio 1:1 ▪ Housing made of reinforced glass-fibre ▪ Case hardened toothed wheels of steel,
reinforced teeth.
▪ Output bevel-wheel running in ball bearings. ▪ Support tube round Ø 20 mm; or square 22 mm ▪ Especially suitable for the driving with Ketterer
motors.
Customer specificThe gear can be supplied with various spindle lengths and spindle pitches. Different types of support tubes are available.
CautionPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
3034
3034.75-02/20160627
Table top
hex 6 mm
Support tube
Spindle
Mounting bolts
Bevel gear 3034
3034.75-02/20160627
Technical Data
Model 3034.00-V01EXXXHXXX 3034.00-V02EXXXHXXX 3034.00-V03EXXXHXXX
Ratio 1:1 1:1 1:1
Input hex 6 mm hex 6 mm hex 6 mm
Type of spindle SG12x16P4 RH SG14x16P4 RH TR14x3 RH
Support tube round Ø 20 mm square 22 mm square 22 mm
Stroke max. retracted length 90 mm retracted length 100 mm retracted length 100 mm
Max. lifting force 700 N 700 N 700 N
Max. drive torque 4 Nm 4 Nm 4 Nm
* in combination with motor drive 3133 and LogicData control box Compact-3
Stroke H to customer specificationfisch
Retracted length E to customer spezification
9.5
24
44
25.8
ø20
Y
View Y
Input
Output spindle
19
12
12.5
ø 4.1(2x)ø 4.6 max. 6 mm deepfor screw M5
25.8
8.5
ø8
hex
6
3034.00-V01EXXXHXXX
ø 3.6 max. 4.5 mm deepfor screw M4
DescriptionGear for stepless height adjustment for sit-sit or sit-stand workplaces. The gear is adapted for both, manual and motorized height adjustment.
Special featuresThe housing is made of zinc die-casting and there is a ball-bearing at the output side. The output can be loaded on pull or push force.
Customer specificThe gear can be supplied with various spindle lengths and spindle pitches.
CautionPlease take into account that depending on the spindle pitch, the systems could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
30353036
3035.75-02/20151009
Bevel gear 3035/3036
3035.75-02/20151009
Technical Data
Model 3035 3036
Ratio 1.5:1 1:1
Input hex 6 mm hex 6 mm
Type of spindle Tr14x3 RH Tr14x3 RH
Stroke max. retracted length -105 mm retracted length -105 mm
Max. lifting force 1000 N 1000 N
Max. drive torque 4 Nm 4 Nm
45
27
37
Stroke H to customer specification
square 22
Retracted length E to customer specification
Output
ø 3.65 (4x) View Y
Y
hex
6 m
m
3535 16
.5
M6
9
X
View X(Rotation stop)
DescriptionThis gear unit is designed to be used for many different mechanical drive solutions. Applications of adjustment for: steppless height-adjustable desks, umbrellas, adjustable windows, partition walls, etc. and any kind of linear adjustments in the industrial machinery industry.
Special features ▪ Ratio 1:1 ▪ Housing made of reinforced glass-fibre ▪ Case hardened toothed wheels of steel ▪ Reinforced tooth system ▪ Ball bearing output wheels
▪ Particularly suitable for the driving with Ketterer motors
Customer specificThe gear can be supplied with various spindle lengths and spindle pitches.
CautionsPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
3039
3039.75-02/20151009
hex 6mm
Table top
Support tube
Spindle
Bevel gear 3039
3039.75-02/20151009
Technical data
Model 3039.00-V01EXXXHXXX 3039.00-V02EXXXHXXX
Ratio 1:1 1:1
Input hex 6 mm hex 6 mm
Type of spindle Tr 14x3 RH SG 14x16P4 RH
Stroke max. retracted length - 99 mm retracted length - 99 mm
Max. lifting force 1200 N 800 N*
Max. drive torque 4 Nm 4 Nm
* in combination with motor drive “KTS 3143”
Stroke H to customer specification
Retracted length E to customer specification
7,6
24
44
30
4kt22
30
Y
View Y
Input
Output spindle
19
12
14,4
ø 4,1(4x)
ø 4,6 max. 7 mm deepfor screw M5
24
View X (Rotation stop)
16,5
9M
6
X
hex6
DescriptionGear for stepless height adjustment for sit-sit- or sit-stand workplaces. The gear is adapted for both manual and motorized height adjustment.
Special features ▪ Ratio 1:1 ▪ Housing made of die-cast zinc ▪ Hardened, bearing seated steel gear cogs ▪ Particularly suitable for motorized solutions ▪ Up to two inputs are possible
Customer specificBecause of its modular design it is possible to meet special customer requirements even for small quantities. The gear is available in various spindle lengths and pitches.
CautionPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
30423043
3042.75-02/20151009
hex 7mm
Support tube
Spindle
Table top
input
input
one input
two opposite inputs
Number and position of the inputsVersions:
output spindle
output spindle
Bevel gear 3042/3043
3042.75-02/20151009
Technical Data
Model 3042 3043
Ratio 1:1 1:1
Input hex 7 mm hex 7 mm
Number of inputs max. 2 max. 2
Type of spindle SG12x12P4 RH **clockwise
SG12x12P4 RH **counter-clockwise
Stroke max. retracted length -105 mm retracted length -105 mm
Max. lifting force 1200 N 1200 N
Max. drive torque 6 Nm 6 Nm
* in connection with motor drive “KTS 3143”** System self-locking in connection with motor drive “KTS 3143”
Output spindle
Stroke H to customer specification
Retracted length E to customer specification
View X (Rotation stop)
View Y
50
Input
50
20
square 22
16.5
M6
9
50 30
ø 4.75 (4x)for self-tapping screws DIN 7500
Y
X
40
40
ø 5.5 (4x)
DescriptionGear for stepless height adjustment for sit-sit- or sit-stand workplaces. The gear is adapted for both, manual and motorized height adjustment.
Special features ▪ Ratio 1:1 or 1:2 ▪ Housing made of reinforced glass-fibre ▪ Case hardened toothed wheels of steel,
reinforced tooth system. ▪ Particularly suitable for the driving with motor
system KTS 3143.
Customer specificThe gear can be supplied with various spindle lengths and spindle pitches.
CautionPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
3045
3045.75-02/20151009
hex 7 mm
Table top
Support tube
Spindle
Bevel gear 3045
3045.75-02/20151009
Technical Data
Model3045.00-
V01EXXXHXXX3045.00-
V02EXXXHXXX3045.00-
V03EXXXHXXX
Ratio 1:1 1:1 1:2
Input hex 7 mm hex 7 mm hex 7 mm
Type of spindle SG 14x16P4 RH ** Tr 14x3 RH Tr 14x3 RH
Stroke max. retracted length -110 mm retracted length -110 mm retracted length -110 mm
Max. lifting force 1200 N * 1200 N 1200 N
Max. drive torque 6 Nm 6 Nm 6 Nm
* in connection with motor drive “KTS 3143” ** System self-locking in connection with motor drive “KTS 3143”
Stroke H to customer specification
Retracted length E to customer specification9
55
ø 42
square 22
35.8
Input Output spindle
M6
22ø 5 (2x) max. 7 mm deep
ø 4.1 (2x)
25.6
ø 9
27
7
35.8
hex 7
16.5
View X(Rotation stop)
View Y
XY
ø 5
Optional:With mounting nut M8
DescriptionGas spring supported spindle lift drive with mechanical blocking unit. The manual lift drive for two-leg tables is actuated by a manual release with Bowden cables.The travel of 500 mm meets the requirements of the new standards for sitting/standing tables. The safety actuator prevents the user from actuating the table unintentionally.
Special featuresThe system is modular in design, and the table is therefore easy to assemble on-site for the end customer. The connecting tube between the table legs and the manual actuator is only fitted during final assembly. This means that the table can be sent in the
normal way to any part of the world with the minimum package dimensions.
Customer specificThe connecting tube is adjusted for the specific distance between the legs on your table. Spring forces and the length of the lifting unit can be customized according to needs.
Safety instruction:The gas spring develops large acceleration forces unless these are counteracted by a corresponding counter- weight designed into the table. The brakes must not be released unless there is an adequate counterweight to slow the movement of the gas spring.
Gas spring spindle actuator 3051
Gas spring spindle actuator
Man
ual S
pind
le D
rives
3051
3051.75-02/20160520
Technical Data
Gas spring spindle actuator 3051 3051 Connecting tube Manual actuator with
Bowden cable
Stroke 500 mm customerspecification
Gas spring F1 200 N customer specification
Retracted length 643 mm 643 mm customer specification
for tables1200x800 mm
to 1600x800 mm
Item number 3051.00-V01H500F200
3051.00-V01HXXXFXXX
3052.40-V01LXXXX
3051.49-0001
Connecting tube3052.40-V01LXXXX
Manual actuator with Bowden cable3051.49-0001
3051.00-V01H500F200
Gas spring spindle actuator 3051
3051.75-02/20160520Dimensions in mm
A
View Y
Ret
ract
ed le
ngth
E =
643
58
44
E +
500
(m
ax. l
engt
h 11
43)
50.5
6.5
Y
500
(Stro
ke m
ax.)
25
28
39.8
L= B + 4
ø15
Connecting tube3052.40-V01LXXXX
Manual actuator with Bowden cable 3051.49-0001
9
24
Ø11.6
16.5
4
34.6
ø4.4/12.5 deepmounting hole
ø4 (2x)
Pin ø5.2/4 high
Pin ø5,2/4 high
View A
5.9
ø4.4/12.5 deepmounting hole
B
ø20
Technical Data
Crank lifting system Lifting unit Connecting
tube Brake unit Deflection gear Deflection gear with brake unit
Ratio 1:1 ø 15 1:1 1:1
Stroke 500 mm
Recommended table load
0 – 40 kg
Retracted length 625 mm customized customized customized customized
Item number 3052.00-0002 3052.40- V01LXXXX
3052.09-V01AXXX
3052.00- V01AXXX
3052.00- V02AXXX
Fast crank lifting system 3052
DescriptionCrank lifting system for fast height adjustment of sit- stand workplaces. Mechanical synchro-nization of two spindle lift drives with crank, brake unit, deflection gear and connecting tube. The system is suitable for 2-leg table frames with high efficiency of the guide units. Convenient adjustment with up to 40 kg table loads is ensured. The lift of 500 mm meets the requirements of the new standard for sitting-standing workplaces.
Special featuresThe system consists of a modular design allowing trouble-free assembly of the table by the end customer.
Connecting tube and deflection gear are attached only during final assembly. This permits shipping the tables in the customary manner worldwide with minimum package dimensions.
Customer specificThe length of the connecting tube is adjusted indi- vidually, depending on the spacing of the table legs. The units can also be furnished with other spring forces.
Safety instuctionGas springs can develope high acceleration forces. Please handle the assembly and this disassembly with care and diligence.
Fast crank lifting system
Man
ual S
pind
le D
rives
3052
3052.75-02/20160520
3052.00-0002
Crank handle5187.00-0032
Brake unit3052.09-V01AXXX
Connecting tube3052.40-V01LXXXX
Deflection gear3052.00-V01AXXX
Fast crank lifting system 3052
3052.75-02/20160520Dimensions in mm
39,8
Inst
alla
tion
leng
th E
= 6
2550
0 (to
tal s
troke
)Plug-in crank 5187.00-0032
Brake 3052.09-V01AXXX
Adapter (optional) 3052.19-05
View Y
Y
Sheet metal frame 100041.35-0001
(optional)
Deflection gear 3052.00-V01AXXX View X 25
39.4 33.3
23.4
39.8ø 4(2x) Trough holes for mounting screw M4
50,533
Lifting unit 3052.00-0002
ø 3.6x6.5 deep (4x)for srew M4 DIN 7500
View Z
12
9ø20
24
X
Pin ø 5.2/4 high (2x)
ø 4.4/12.5 deepMounting hole (2x)
for screw WN1452 K50x12
a
b
18
16.5
Brake 3052.09-V01AXXX
Deflection gear 3052.00-V01AXXX
Deflection gear with brake 3052.00-V02AXXX (optional)
hex
6
39.8
A
hex
6
39.4
ø10
39.8
33 25
10
16.5
ø 15
Connecting tube 3052.40.-V01LXXXX
L1= a + 4L2= b + 4
square 33
25.5
hex
9
Y
65.5
ø12
ø 3.6 x 6.5 deep (4x) for screw M4 DIN 7500 A
A
26
ø12
Z
E +
500
(max
. len
gth
1125
)
hex
6
ø 4.1(2x)
25.5
square 33
ø 4(2x) Trough holes for mounting screw M4
DescriptionCompact gear for big umbrellas, dividing wall systems and industrial applications.
Special featuresA special toothing ensures a smooth running of the gear. ▪ Ratio1:2 ▪ Housing made of die-cast zinc ▪ Case-hardened bevel wheels
Customer specificInput and output can be modified to a customer specific appliance.
Bevel gear
Bev
el G
ears
3056
3056.75-02/20160715
40.6
33.8
6
15
110.
6
65.5
33.2
ø 3.65 (2x)
15.9
ø47
1.8
6
45.2
99
Bevel gear 3056
3056.75-02/20160715
Technical Data
Model 3056
Ratio 1 : 2
Input hex 7 mm
Output hex 9 mm
Number of bevel wheels 2
Housing material die-cast zinc
Max. drive torque 6 Nm
Max. traction load static 8000 N
Max. pressure load static 5000 N
hex1
2
hex9
Output
Inputhex 7
12 mm deep for screw
DIN 7500 M4
Application example
Attention: Spindle is not in scope of delivery; can be produced to customer requirements.
DescriptionCompact gear for big umbrellas, dividing wall systems industrial applications.
Special featuresA special toothing ensures a smooth running of the gear. ▪ Ratio 1:2 ▪ Housing made of die-cast zinc ▪ Case-hardened bevel wheels ▪ Simple mounting
Customer specificInput and output can be modified to a customer specific appliance. Gear can be combined with various spindles.
Bevel gear
Bev
el g
ears
3057
3057.75-02/20160715
Bevel gear 3057
3057.75-02/20160715
Technical Data
Model 3057.00-0010
Ratio 1 : 2
Input hex 6 mm
Output hex 9 mm
Number of bevel wheels 2
Housing material die-cast zinc
Max. drive torque 2.5 Nm
Max. traction load static 8000 N
Max. pressure load static 5000 N
hex
9
hex
6
49.2
125.
4
38.1
56.2
Output
ø 31
56.2
Input
square 30
ø 3.65 mm / max. 8.5 mm deep (2x on both sides) for screws DIN 7500 M4
ø 4.45 mm / max. 8 mm deep (2x on both sides) for screws DIN 7500 M5
hex
12
X
View X
Application example
Attention: Spindle is not in scope of delivery; can be produced to customer requirements.
DescriptionCompact gear for big umbrellas, industry applications.
Special featuresA special toothing ensures a smooth running of the gear. ▪ Ratio1:4 ▪ Housing made of aluminium ▪ Case-hardened bevel wheels
Customer specificInput and output can be modified to a customer specific appliance.The bevel gear can be combined with any spindle type.
Bevel gear
Bev
el G
ears
3058
3058.75-02/20160713
Bevel gear 3058
3058.75-02/20160713
Technical data
Model 3058.00-0005
Ratio 1:4
Input hex 9 mm
Output hex 9 mm
Number of bevel wheels 2
Housing material aluminium
Max. drive torque 10 Nm
Max. traction load static (temporary)
10,000 N
Max. pressure load static (temporary)
12,000 N
Output
Input
ø15
53,4
hex12
hex9
ø51
45°
ø59
10-32 UNF-2B/13 deep (2x on both sides)
View X
3,5
square51
52,1
hex9
133,
7
27
X
Application example
Attention: Spindle is notin scope of delivery;canbe produced to customer requirements.
DescriptionGear for stepless height adjustment on sit-sit- or sit-stand workplaces. The gear is adapted for both, manual and motorized height adjustment.
Special features ▪ Ratio 1.83:1 ▪ Housing made of die-cast zinc ▪ Hardened, bearing seated steel gear cogs ▪ Particularly suitable for motorized solutions ▪ Up to four inputs are possible
Customer specificBecause of its modular design it is possible to meet special customer requirements even for small quantities. The gear is available in various lengths and with various pitches.
CautionPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
3070 3071
3070.75-02/20151009
Input hex 7 mm
Support tube
Spindle
Table top
one input
two inputs 90°
two opposing inputs
three inputs
four inputs
Number and position of the inputsVersions:
input
input
input
input
input
output spindle
output spindle
output spindle
output spindle
output spindle
Bevel gear 3070/3071
3070.75-02/20151009
Technical Data
Model 3070 3071
Ratio 1.83:1 1.83:1
Input hex 7 mm hex 7 mm
Number of inputs max. 4 max. 4
Type of spindle SG12x12P4 RH **clockwise
SG12x12P4 RH **counter-clockwise
Stroke max. retracted length -105 retracted length -105
Max. lifting force 1200 N 1200 N
Max. drive torque 6 Nm 6 Nm
* in connection with motor drive “KTS 3143”** System self-locking in connection with motor drive “KTS 3143”
Stroke H to customer specification
View Y
View X (Rotation stop)
Output spindle
Input
M6
Retracted length E to customer specification
50
square 22
16.5
9
20
3050
ø 4.75 (4x)
50
Y
X
40
40 20
30
ø 5.5 (4x)
ø 4.75 (4x) max.12.6 mm deep
DescriptionThese gears are suitable for installations in tubes with an internal diameter of 31 mm. The diameter of the housing can be modified to other tube diameters if the order size is sufficient.
Special features ▪ Ratio 1:1 ▪ Housing made of die-cast zinc ▪ Case-hardened gear-wheels ▪ Spindle nut made of glass-fibre reinforced
plastic ▪ Complete bevel-gear drive unit, with a spindle,
spindle nut and support tube.
Customer specificThe gear can be supplied with various spindle lengths and spindle pitches.
CautionPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
3824
3824.75-02/20151009
Support tube
Spindle
hex 6mm
Table top
Bevel gear 3824
3824.75-02/20151009
Technical Data
Model 3824.00-V01EXXXHXXX
Ratio 1:1
Input hex 6 mm
Type of spindle Tr 14x3 RH
Stroke max. retracted length - 98 mm
Max. lifting force 1000 N
Max. drive torque 3 Nm
InputOutput spindle
Stroke H to customer specification
Retracted length E to customer specification
square 22 mm
11 14
42.1
Y X
View Y
hex 6mm
M6
9
16.5
View X(Rotation stop)
33.1
ø30.7
M5x6 mm-DIN 7984 (2x)
9M5
6 7.5
View Z
Z
DescriptionGear for stepless height adjustment for school furniture, office furniture and workplaces. The gear is suitable for the mounting in tubes with an inside diameter of 25 mm.
Special featuresThe bevel gear will be delivered completely with inputspindle and the suitable spindle nuts. ▪ Ratio 1:1 ▪ Housing made of zinc die-casting ▪ Case hardened steel cog wheels
Customer specificThe gear can be supplied with various spindle lengths, spindle pitches and suitable nuts.
CautionPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
3826
3826.75-02/20151009
Bevel gear 3826
3826.75-02/20151009
Technical Data
Model 3826
Ratio 1:1
Input hex 5 mm
Stroke max. customer specific
Retracted length customer specific
Max. lifting force 400 N with Tr10x3
Max. drive torque 1.5 Nm
Output
hex
5 m
m
M516
28.7
Measure to customer specification
ø25
Y
View Y
ø22
Retracted length E to customer specification
Input48.3
DescriptionBevel gear for through-going, not rotating, spindle for push and pull movements. Gear particularly suitable for machine construction and lifting systems for skylights, winter gardens and green houses.
Special featuresA special toothing ensures a smooth running of the gear. ▪ Ratio 1.44:1; 1.5:1 ▪ Housing made of die-cast zinc ▪ Case hardened, bearing seated steel cog
wheels
Customer specificThe gear can be supplied in combination with various types of threads.Spindles can be produced to customer requirements.
CautionPlease take into account that depending on the spindle pitch, the system could back-drive.
Bevel gear
Man
ual S
pind
le D
rives
39003901
3900.75-02/20160906
Bevel gear 3900/3901
3900.75-02/20160906
Technical Data
Model 3900 3901
Ratio 1.44:1 1.5:1
Input hex 7 mm hex 7 mm
Type of thread Tr12x3 RH Tr12x3 RH
Max. lifting force 800 N 800 N
50
4
40
8.5
50
40
40
Output(for through-going spindle Tr12x3 RH)
ø 3.65 bore hole (10 deep) self-tapping screws DIN 7500 M4
Input hex 7
e-Motor
mounting flange for e-motor Item-No.- 3960.15-00
spindle is not in scope of delivery;can be produced to customer requirements
20
5030
ø 4.6 bore hole (8.5 deep) self-tapping screws DIN 7500 M5
ø 4.6 (4x) 8.5 deep
ø 5.5 (4x)
30
20
DescriptionCost-efficient solution for the individual sit-stand workplaces. Smooth running, stepless height adjustment with high crank speed.
Special featuresSmall and compact design, simple mounting, Synchronous motion of the spindle elements, double stroke speed. ▪ Stroke per crank rotation 14 mm
Customer specificBecause of the modular design it is possible to meet special customer requirements even for small quantities.
Fast crank adjustment
Man
ual S
pind
le D
rives
4139
4139.75-02/20151009
Fast crank adjustment 4139
4139.75-02/20151009
Technical Data
Model 4139.00-V01EXXXHXXX
Movement 14 mm/rev.
synchronous spindle movement
Ratio 1:1
Input hex 7 mm
Type of spindle SG12x7P3.5 LH
SG25x7P3.5 RH
Stroke max. (retracted lenght -110 mm) x 2
Max. lifting force 800 N
Max. drive torque 6 Nm
E + H
Retracted length E to customer specification (min. length 437 mm)
X
synchronous stroke 1 = stroke 2
Z
Stroke H to customer specification(max. length 630 mm)
ø44
hex 7mm
16.5
M6
9
View XView Z
ø56
22
bearing bush for fixingby screws DIN 915-M6mounting depth max. 8 + 0.5 mm
Your partner in quality engineering products since 1986
Thank you for viewing product information on TEA’s range of engineering components. Now please contact us at the nearest office to you for any further information, prices and availability: AUSTRALIA & New Zealand USA, South America & Canada T.E.A. Transmissions Pty Ltd T.E.A. Machine Components Inc. Tahiti Road 2281-F Dabney Road Tiaro Qld 4650 Richmond Virginia 23230 Australia USA Ph: 61-(0)7 4129 2533 Ph: 1-804-342-0004 Fax: 61-(0)7 4129 2437 Fax: 1-804-342-0006 Email: [email protected] Email: [email protected] www.tea.net.au www.teausa.net
You are assured of prompt and efficient service at all time.