Chain SlidersModels GDS 630 CH, GDS 630 CH HD

GDS 630 CH HD (HEAVY DUTY)HEAVY DUTY CHAIN SLIDER WITH IDLER SHAFT

• 1.5Kw inverter with CB6 controls• 1.1Kw Drive motor• Cast iron gearbox with idler shaft• Includes chain mounting bracket & holders• Variable speed - up to 630mm per sec on opening• Normally 300mm/sec on closing• Latest technology in industrial gate controls• Reduced installation time

GDS 630 CHCHAIN SLIDER WITH IDLER SHAFT

• .75Kw inverter with CB6 controls• .75Kw Drive motor• Cast iron gearbox with idler shaft• Includes chain mounting bracket & holders• Variable speed - up to 630mm per sec on opening• Normally 300mm/sec on closing• Latest technology in industrial gate controls• Reduced installation time

For heavy large gatesGates with poor trackLong gates where bending may occur in hot weather

• The unit is easily fixed in position by bolting the mounting plate down with 4 of M12 masonry anchor bolts.• Chain supports are then fitted every 1000mm along the bottom rail of the gate.• The provided chain brackets are then bolted to either end of the gate and the chain is fitted to these brackets

and under each of the operator’s idler sprockets and over the drive sprocket.

240v Non earth leakage protected circuit

GENERAL INFORMATION

TECHNICAL DETAILS

SPECIFICATIONS

WIRING DETAILS

GDS 630 CH HD - GDS 630 CH

Manufactured by:

N14870

Manufactured by:

N14870

NOTE: All automation applications require external photo electric cell protection/induction loop and appropriate warning signs and/or devices.

Specifications subject to change without notice