220vac input/24vdc (150ma) output 220vac input/24vdc...
TRANSCRIPT
220VAC Input/24VDC (200mA) Output
Non-Isolated AC/DC ConverterBP5048-24
Data Sheet
Absolute Maximum Ratings
Input voltageMaximum Output currentESD enduranceMaximum surface temperatureOperating temperature rangeStorage temperature range
Parameter Symbol Limits Unit
VccIoMAX
VsurgeTcMAX
ToprTstg
3582002
105−20 to +80
−25 to +105
VmApk
kV°C°C°C
Load RegulationLoad Regulation
25.024.824.624.424.224.023.823.623.423.223.0
0 50 100 150 200
(Ta=25°C, Vi=311V)
Output Current Io (mA)
Out
put V
olta
ge V
o (V
)
Conversion EfficiencyConversion Efficiency
10090807060504030201000 15010050 200
(Ta=25°C, Vi=311V)
Output Current Io (mA)
Con
vers
ion
Effi
cien
cy η
(%)
Surface Temperature IncreaseSurface Temperature Increase
40353025201510
50
500 200150100
(Ta=25°C, Vi=311V)
Output Current Io (mA)
Tem
pera
ture
Ris
ing
∆T (
°C)
Dimensions (Unit : mm)
Application Circuit
External Component Specifications
FUSE: Fuse Use a fuse of 1A.
Rated voltage 400V or higher, 22 to 820µF Permissible ripple current 0.13Arms or higher
Rated voltage 35V or higher 100 to 470µF Low impedance typeImpedance is 0.4Ω max at high frequencies.Permissible ripple current 0.25Arms or higherEvaluate under actual operating conditions.
C1: Input capacitor
C2: Output capacitor
Rated voltage 400V or higher 0.1 to 0.22µFFilm or ceramic capacitorEvaluate under actual operating conditions.
C3: Noise removal capacitor
Inductance = 1.5mHPermissible current value 450mA or higher
L1: Power inductor
A reverse surge voltage 800V or higherAn average rectifying current of 0.5AThe forward surge current should be 20A or higher
D1: Rectifier diode
10 to 22Ω 1/4WDetermine the ideal value through actual testing.
R1: Noise removal resistor
A varistor is required to protect against lightning surges and static electricity.
ZNR: Varistor
Pin No.123456789101112
FunctionOutput terminal Vo(24V)SkipChoke coil connectSkipChoke coil connectSkipCOMMONSkipSkipN.C.SkipInput terminal Vi(311VDC)
Please verify operation and characteristics in the customer's circuit before actual usage. Ensure that the load current does not exceed the maximum rating.
BP5048-24
Be sure to use fuse for safety.
DC motor
VoC2
FUSE
12 10 7 5 3 1
+− C1
ZNR
R1D1
Vi
Ii
C3L1
1.5mH
22.0
MA
X.
4±1.
0
35.0MAX.
2.5411=27.94
1 3 5 7 10 12
0.5±0.1
5.08 1.3±0.2
7.62
3.6MAX.
+−
Io
Mar
k S
ide
9.2MAX.
4.85MAX.
4.35MAX.
0.25±0.05
Unit Conditions
∗1
∗2
∗2∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curves.∗2 Please refer to Load regulation, Conversion efficiency.
VV
mAVV
Vp-p%
DCVi=311V, Io=100mAVi=311VVi=249 to 358V, Io=100mAVi=311V, Io=0 to 100mAVi=311V, Io=100mAVi=311V, Io=200mA
Electrical Characteristics
Input voltage rangeOutput voltageOutput currentLine regulationLoad regulationOutput ripple voltagePower conversion efficiency
Parameter Symbol Typ. Max.Min.
ViVoIoVrVlVpη
31124.0
−0.050.050.0778
35825.82000.200.200.15
−
22823.0
0−0.20−0.20
−65
Derating CurveDerating Curve
Operation Range
250
200
150
100
50
00 10-20 -10-30 20 4030 80706050 90
Ambient Temperature Ta (°C)
Out
put C
urre
nt Io
(m
A)
220VAC Input/24VDC (150mA) Output
Non-Isolated AC/DC ConverterBP5047A24
Data Sheet
Absolute Maximum Ratings
Input voltageMaximum output voltageESD enduranceOperating temperature rangeStorage temperature range
Parameter Symbol Limits Unit
ViIoMAX
VsurgeToprTstg
3581502
−20 to +80−25 to +105
VmApk
kV°C°C
Load RegulationLoad Regulation
30
25
20
15
10
5
00 50 100 150 200
(Ta=25°C, Vi=311V)
Output Current Io (mA)
Out
put V
olta
ge V
o (V
) Conversion Efficiency
Conversion Efficiency
10090807060504030201000 60 1401004020 12080 160
(Ta=25°C, Vi=311V)
Output Current Io (mA)
Con
vers
ion
Effi
cien
cy η
(%)
Surface Temperature IncreaseSurface Temperature Increase
30
25
20
15
10
5
0500 150100
(Ta=25°C, Vi=311V)
Output Current Io (mA)
Tem
pera
ture
Ris
ing
∆T (
°C)
Dimensions (Unit : mm)
Application Circuit
External Component Specifications
FUSE: Fuse Use a fuse of 1A.
Rated voltage 400V or higher 22 to 820µFPermissible ripple current is 0.13Arms or higher
Rated voltage 35V or higher, 100 to 470µF Low impedance typeImpedance is 0.4Ω max at high frequencies.Evaluate under actual operating conditions.
C1: Input capacitor
C2: Output capacitor
Rated voltage 400V or higher 0.1 to 0.22µFFilm or ceramic capacitorEvaluate under actual operating conditions.Ripple current 0.25Arms or greater.Capacitor impedance affects the output ripple voltage.
C3: Noise removal capacitor
Inductance : 1.5mH Permissible current value 300mA or higher
L1: Power inductor
A reverse surge voltage 800V or higherAn average rectifying current 0.5A or higherThe forward surge current should be 20A or higher.
D1: Rectifier diode
10 to 22Ω 1/4WDetermine the ideal value through actual testing.
R1: Noise removal resistor
A varistor is required to protect against lightning surges and static electricity.ZNR: Varistor
Pin No.123456789
101112
FunctionOutput terminal Vo(24V)SkipChoke coil connectSkipChoke coil connectSkipCOMMONSkipSkipN.C.SkipInput terminal Vi(311VDC)
Please verify operation and characteristics in the customer's circuit before actual usage. Ensure that the load current does not exceed the maximum rating.
BP5047A24
Be sure to use fuse for safety.
DC motor
VoC2
FUSE
12 10 7 5 3 1
+− C1
ZNR
R1D1
Vi
Ii
C3L1
19.1
MA
X.
4±1.
0
34.5MAX.
2.5411=27.94
1 3 5 7 10 12
0.5±0.1
5.08 1.3±0.2
7.62
3.25MAX.
+−
IoM
ark
Sid
e
9.2MAX.
4.65MAX.
4.55MAX.
0.25±0.05
Unit ConditionsVV
mAVV
Vp-p%
Vi=311V, Io=100mAVi=311VVi=249 to 358V, Io=100mAVi=311V, Io=0 to 100mAVi=311V, Io=100mAVi=311V, Io=150mA
Electrical Characteristics
Input voltage rangeOutput voltageOutput currentLine regulationLoad regulationOutput ripple voltagePower conversion effciency
Parameter Typ. Max.Min.Symbol
ViVoIoVrVlVpη
31124.0
−0.050.050.0778
35825.81500.200.200.15
−
24923.0
0−0.20−0.20
−65
∗2
∗2
∗1
∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve.∗2 Please refer to Load regulation, Conversion effciency.
Derating CurveDerating Curve
Operation Range
250
200
150
100
50
00 10-20 -10-30 20 4030 80706050 90
Ambient Temperature Ta (°C)
Out
put C
urre
nt Io
(m
A)
1/1 2010.01 - Rev.Awww.rohm.com©2010 ROHM Co., Ltd. All rights reserved.
R1010Awww.rohm.com© 2010 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support Systemhttp://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us.
No t e s
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information.
The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, commu-nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.