2- channel structure and function 26
TRANSCRIPT
-
8/3/2019 2- Channel Structure and Function 26
1/25
-
8/3/2019 2- Channel Structure and Function 26
2/25
Channel Structure andfunction
Version 3.00
ZTE CORPORATIONZTE Plaza, Keji Road South,Hi-Tech Industrial Park,Nanshan District, Shenzhen,P. R. China518057 Tel: (86) 755 26771900 800-9830-9830Fax: (86) 755 26772236URL:http://support.zte.com.cnE-mail: [email protected]
http://support.zte.com.cn/http://support.zte.com.cn/mailto:[email protected]:[email protected]://support.zte.com.cn/ -
8/3/2019 2- Channel Structure and Function 26
3/25
Contents
Chapter 1..................................................................1
Chanel structure........................................................1
Channels of UTRAN...........................................................1
Logical channels....................................................................2
Transport channels ...............................................................3
Physical channels .................................................................5
Channel Mapping.................................................................18
Physical layer porcedure..................................................20
Cell search procedure...........................................................20
Random Access Procedure....................................................20
-
8/3/2019 2- Channel Structure and Function 26
4/25
C h a p t e r 1
Chanel structure
No flammables:
mapping of logical channels onto transport channels
mapping of transport channels and physical channels
physical layer procedure
Channels of UTRANChannels of UTRAN are divided into
logical channels
transport channels
physical channels
In air interface protocol modele of UTRAN, MAC layer accomplishthe mapping of logical channels onto transport channels, PHY
layer accomplish the mapping of transport channels ontophysical channels. Figure 1 shows the position of logicalchannels and transport channels
Confidential and Proprietary Information of ZTE CORPORATION 1
-
8/3/2019 2- Channel Structure and Function 26
5/25
Channel Structure and function
F I G U R E 1 L O G I C A L C H A N N E L S A N D T R A N S P O R T C H A N N E L S
Du p l i c a t i o n Av o id a n c e
G C N t D C
G C N t D C
R L CR L C
R L CR L C
R L CR L C
R L CR L C
B M C
P D C PP D C P
C -p la n e s ig na llin g U -p lan e in fo rm a tio nU u S b o u n d a r
control
control
control
control
L 3
R a d io
B e a r e r s
L 2 / P D C P
L 2 / B M C
L 2 / R L C
L o g ic a l
C h a n n e l s
L 2 / M A C
T r a n sp o r tC h a n n e l s
L 1
c o n t r o lR R C
M A C
P H Y
Logical channels
MAC layer implement the mapping between logical channel andtransport channel and provide data transport service for logical.
Logical channels are divided into control channel and traffic
channel. Fig illustrates the structure of logical channels:
2 Confidential and Proprietary Information of ZTE CORPORATION
-
8/3/2019 2- Channel Structure and Function 26
6/25
Chapter 1 Chanel structure
F I G U R E 2 LO G I C A L C H A N N E L S T R U C T U R E
Control channels only used to transport control planeinformation. Including BCCH,PCCH,CCCH,DCCH,SHCCH.
Traffic channels only used to transport user plane information.Inculuding DTCH,CTCH.
Transport channels
Transport channels are services offered by Layer 1 to the higher
layersA transport channel is defined by how and with whatcharacteristics data is transferred over the air interface. A
general classification of transport channels is into two groups:
Dedicated channel: used by dedicated user.
Common channel: used by all users within one cell.
Show as Figure 3
Confidential and Proprietary Information of ZTE CORPORATION 3
-
8/3/2019 2- Channel Structure and Function 26
7/25
Channel Structure and function
F I G U R E 3 T R A N S P O R T C H A N N E L S
B C H
P C H
F A C H
D S C H
R A C H
C P C H
D C H
D C H
There exists only one type of dedicated transport channel, theDedicated Channel (DCH). The Dedicated Channel (DCH) is adownlink or uplink transport channel. The DCH is transmittedover the entire cell or over only a part of the cell using e.g.
beam-forming antennas.
There are six types of common transport channels: BCH, FACH,PCH, RACH, CPCH and DSCH.
Broadcast Channel -BCH
The Broadcast Channel (BCH) is a downlink transport channelthat is used to broadcast system- and cell-specific information.
The BCH is always transmitted over the entire cell and has asingle transport format.
Forward Access Channel -FACH
The Forward Access Channel (FACH) is a downlink transport
channel. The FACH is transmitted over the entire cell. It isused to transmit control imformation after Basestation havereceived the random access requirement sent by UE. FACH isalso can be used to send paket data.
There is one or several FACH within one cell. One of them
must has low datarate so all terminals in this cell can receiveit. The others can have high datarate.
Paging Channel - PCH
The Paging Channel (PCH) is a downlink transport channel.The PCH is always transmitted over the entire cell. Thetransmission of the PCH is associated with the transmissionof physical-layer generated Paging Indicators, to support
efficient sleep-mode procedures.
Random Access Channel - RACH
The Random Access Channel (RACH) is an uplink transport
channel. The RACH is always received from the entire cell. It
4 Confidential and Proprietary Information of ZTE CORPORATION
-
8/3/2019 2- Channel Structure and Function 26
8/25
Chapter 1 Chanel structure
is used to carry control information (such as call setuprequest) sent by UE.The RACH is characterized by a collisionrisk and by being transmitted using open loop power control.
Commnon Packet Channel - CPCH
The Common Packet Channel (CPCH) is an uplink transport
channel. CPCH is associated with a dedicated channel on thedownlink which provides power control and CPCH Control
Commands (e.g. Emergency Stop) for the uplink CPCH. TheCPCH is characterised by initial collision risk and by being
transmitted using inner loop power control.
Downlink Shared Channel - DSCH
The Downlink Shared Channel (DSCH) is a downlinktransport channel shared by several UEs The DSCH isassociated with one or several downlink DCH. The DSCH istransmitted over the entire cell or over only a part of the cellusing e.g. beam-forming antennas.
Physical channels
Physical channels are defined by a specific carrier frequency,scrambling code, channelization code (optional), time start &stop (giving a duration) and, on the uplink, relative phase (0 or
/2). There is 2 types of physical channel. Uplink physical anddownlink physical.
Uplink physical channels
There are 2 types of uplink dedicated physical channels(UplinkDedicated Physical Data Channel and Uplink Dedicated PhysicalControl Channel) and 2 types of uplink common physicalchannels( Physical Random Access Channel and PhysicalCommon Packet Channel) illustrate as Figure 4
F I G U R E 4 U P L I N K P H Y S I C A L C H A N N E L S
Uplink dedicated physical channels
Confidential and Proprietary Information of ZTE CORPORATION 5
-
8/3/2019 2- Channel Structure and Function 26
9/25
Channel Structure and function
There are two types of uplink dedicated physical channels, theuplink Dedicated Physical Data Channel (uplink DPDCH) and theuplink Dedicated Physical Control Channel (uplink DPCCH).TheDPDCH and the DPCCH are I/Q code multiplexed within each
radio frameThe uplink DPDCH is used to carry the DCH transport channel.There may be zero, one, or several uplink DPDCHs on each radiolink.
The uplink DPCCH is used to carry control information generated
at Layer 1. The Layer 1 control information consists of knownpilot bits to support channel estimation for coherent detection,transmit power-control (TPC) commands, feedback information(FBI), and an optional transport-format combination indicator(TFCI). The transport-format combination indicator informs thereceiver about the instantaneous transport format combination
of the transport channels mapped to the simultaneouslytransmitted uplink DPDCH radio frame. There is one and only
one uplink DPCCH on each radio link.
Figure 5 shows the frame structure of the uplink dedicatedphysical channels. Each radio frame of length 10 ms is split into15 slots, each of length Tslot = 2560 chips, corresponding to one
power-control period.
F I G U R E 5 F R A M E S T R U C T U R E O F U P L I N K D E D I C A T E D P H Y S I C A L C H A N N E L
The parameter k in figure determines the number of bits peruplink DPDCH slot. It is related to the spreading factor SF of theDPDCH as SF = 256/2k. The DPDCH spreading factor may rangefrom 256 down to 4. The spreading factor of the uplink DPCCH isalways equal to 256, i.e. there are 10 bits per uplink DPCCHslot.
The exact number of bits of the uplink DPDCH and the differentuplink DPCCH fields (Npilot, NTFCI, NFBI, and NTPC) is configured byhigher layers and can also be reconfigured by higher layers.
The FBI bits are used to support techniques requiring feedback
from the UE to the UTRAN Access Point, including closed loop
6 Confidential and Proprietary Information of ZTE CORPORATION
-
8/3/2019 2- Channel Structure and Function 26
10/25
Chapter 1 Chanel structure
mode transmit diversity and site selection diversity transmission(SSDT).
There are two types of uplink dedicated physical channels; those
that include TFCI (e.g. for several simultaneous services) and
those that do not include TFCI (e.g. for fixed-rate services). It isthe UTRAN that determines if a TFCI should be transmitted andit is mandatory for all UEs to support the use of TFCI in theuplink.
Npilot34567and 8The shadowed column part of pilotbit pattern is defined as FSW and FSWs can be used to confirm
frame synchronization. (The value of the pilot bit pattern otherthan FSWs shall be "1".)
TPC is corresponding to power contrl command.
Multi-code operation is possible for the uplink dedicated physicalchannels. When multi-code transmission is used, several parallelDPDCH are transmitted using different channelization codes.However, there is only one DPCCH per radio link.
Uplink common physical channels
Physical Random Access Channel (PRACH)
The random-access transmission is based on a Slotted
ALOHA approach with fast acquisition indication. The UE canstart the random-access transmission at the beginning of anumber of well-defined time intervals, denoted access slots.There are 15 access slots per two frames and they arespaced 5120 chips apart Information on what access slots
are available for random-access transmission is given byhigher layers.The random-access transmission consists ofone or several preambles of length 4096 chips and a
message of length 10 ms or 20 ms.
F I G U R E 6 F R A M E S T R U C T U R E O F R A N D O M A C C E S S C H A N N E L
Confidential and Proprietary Information of ZTE CORPORATION 7
-
8/3/2019 2- Channel Structure and Function 26
11/25
Channel Structure and function
Pilot
Npilot bits
Data
Ndata bits
Slot #0 Slot #1 Slot #i Slot #14
Tslot = 2560 chips, 10*2kbits (k=0..3)
Message part radio frame TRACH = 10 ms
Data
ControlTFCI
NTFCI bits
Each preamble is of length 4096 chips and consists of 256repetitions of a signature of length 16 chips. There are amaximum of 16 available signatures.
The 10 ms message part radio frame is split into 15 slots, eachof length Tslot = 2560 chips. Each slot consists of two parts, adata part to which the RACH transport channel is mapped and acontrol part that carries Layer 1 control information. The dataand control parts are transmitted in parallel.
A 10 ms message part consists of one message part radio
frame, while a 20 ms message part consists of two consecutive10 ms message part radio frames. The message part length isequal to the Transmission Time Interval of the RACH Transportchannel in use. This TTI length is configured by higher layers.
The data part consists of 10*2k bits, where k=0,1,2,3. Thiscorresponds to a spreading factor of 256, 128, 64, and 32respectively for the message data part.
The control part consists of 8 known pilot bits to support channel
estimation for coherent detection and 2 TFCI bits. Thiscorresponds to a spreading factor of 256 for the message control
part. The pilot bit pattern is described in table 8. The totalnumber of TFCI bits in the random-access message is 15*2 =30. The TFCI of a radio frame indicates the transport format ofthe RACH transport channel mapped to the simultaneouslytransmitted message part radio frame. In case of a 20 msPRACH message part, the TFCI is repeated in the second radio
frame. Physical Common Packet ChannelPCPCH
The Physical Common Packet Channel (PCPCH) is used tocarry the CPC. The CPCH transmission is based on DSMA-CD
approach with fast acquisition indication. The UE can starttransmission at the beginning of a number of well-defined
time-intervals, relative to the frame boundary of the receivedBCH of the current cell.
The PCPCH access transmission consists of one or severalAccess Preambles [A-P] of length 4096 chips, one Collision
Detection Preamble (CD-P) of length 4096 chips, a DPCCH
Power Control Preamble (PC-P) which is either 0 slots or 8
8 Confidential and Proprietary Information of ZTE CORPORATION
-
8/3/2019 2- Channel Structure and Function 26
12/25
Chapter 1 Chanel structure
slots in length, and a message of variable length Nx10 ms.
F I G U R E 7 F R A M E S T R U C T U R E O F CPCH
Pilot
Npilot bits
TP C
NTPC bits
Data
Ndata bits
Slot #0 Slot #1 Slot #i Slot #14
Tslot = 2560 chips, 10*2k
bits (k=0..6)
1 radio frame: Tf = 10 ms
Data
ControlFBI
NFBI bitsTFCI
NTFCI bits
CPCH access preamble part
Similar to RACH preamble part. The RACH preamble signaturesequences are used. The number of sequences used could be
less than the ones used in the RACH preamble. The scramblingcode could either be chosen to be a different code segment of
the Gold code used to form the scrambling code of the RACHpreambles or could be the same scrambling code in case the
signature set is shared.
CPCH collision detection preamble partSimilar to RACH preamble part. The RACH preamble signaturesequences are used. The scrambling code is chosen to be adifferent code segment of the Gold code used to form thescrambling code for the RACH and CPCH preambles
CPCH power control preamble part
The power control preamble segment is called the CPCH PowerControl Preamble (PC-P) part. The Power Control Preamblelength is a higher layer parameter, Lpc-preamble, which shall take
the value 0 or 8 slots. The TFCI field is filled with "1" bits.
CPCH message part
Confidential and Proprietary Information of ZTE CORPORATION 9
-
8/3/2019 2- Channel Structure and Function 26
13/25
Channel Structure and function
Similar to uplink dedicated channel, Each 10 ms frame is splitinto 15 slots, each of length Tslot = 2560 chips. Each slot consistsof two parts, a data part that carries higher layer informationand a control part that carries Layer 1 control information. The
data and control parts are transmitted in parallel. The sf ofCPCH message part is 256
Downlink physical channel
Downlink physical channels include Detedicated physical channel\ one Shared Physical Channel\ five Commnon Control Channel
downlink Detedicated physical channel -DPCH
primary and secondary Commnon Pilot Channel - CPICH
primary and secondary Common Control Physicl Channel -CCPCH
Synchronous Channel - SCH
Physical Downlink Shared Channel - DSCH
Acquisition Indication Channel - AICH
Paging Indication Channel - PICH
downlink physical are illustrated as Figure 8
F I G U R E 8 D O W N L I N K P H Y S I C A L C H A N N E L S
There is only one type of downlink dedicated physical channel,the Downlink Dedicated Physical Channel (downlink DPCH).
Within one downlink DPCH, dedicated data generated at Layer 2and above, i.e. the dedicated transport channel (DCH), istransmitted in time-multiplex with control information generatedat Layer 1 (known pilot bits, TPC commands, and an optionalTFCI). The downlink DPCH can thus be seen as a time multiplexof a downlink DPDCH and a downlink DPCCH.
Each frame of length 10 ms is split into 15 slots, each of length
10 Confidential and Proprietary Information of ZTE CORPORATION
Downlink DedicatedPhysical Channel
-
8/3/2019 2- Channel Structure and Function 26
14/25
Chapter 1 Chanel structure
Tslot = 2560 chips, corresponding to one power-control period.
F I G U R E 9 F R A M E S T R U C T U R E O F DL DPCH
The parameter k in figure 9 determines the total number of bitsper downlink DPCH slot. It is related to the spreading factor SFof the physical channel as SF = 512/2k. The spreading factormay thus range from 512 down to 4.
The exact number of bits of the different downlink DPCH fields
(Npilot, NTPC, NTFCI, Ndata1 and Ndata2) is given in table 11. What slotformat to use is configured by higher layers and can also bereconfigured by higher layers.
There are basically two types of downlink Dedicated Physical
Channels; those that include TFCI (e.g. for several simultaneous
services) and those that do not include TFCI (e.g. for fixed-rateservices). It is the UTRAN that determines if a TFCI should betransmitted and it is mandatory for all UEs to support the use ofTFCI in the downlink.
Npilot248 & 16
TPC symbol is corresponding to transimission power controlcommand T 0or1
Downlink Common Physical Channel
Common Pilot Channel (CPICH)
The CPICH is a fixed rate (30 kbps, SF=256) downlink physical
channel that carries a pre-defined bit sequence. There are twotypes of Common pilot channels, the Primary and Secondary
CPICH. They differ in their use and the limitations placed ontheir physical features.Fig show the frame structure of CPICH.
Confidential and Proprietary Information of ZTE CORPORATION 11
-
8/3/2019 2- Channel Structure and Function 26
15/25
Channel Structure and function
Pre-defined bit sequence
Slot #0 Slot #1 Slot #i Slot #14
Tslot = 2560 chips , 20 b it
1 radio frame: = 10 ms
s l o t #1
F r a m e # i + 1F r a m e # i
s l o t #14
A n t e n n a 2
A n t e n n a 1
s l o t #0
F r a m e B o u n d a r y
0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0
1 1 1 1 0 0 0 0 1 1 1 10 0 0 0 1 1 0 0 1 1 1 1 0 0 0 0 1 11 1 0 0 0 01 1 1 1 0 0 0 0 1 1 1 1
The Primary Common Pilot Channel (P-CPICH) has the following
characteristics:
- The same channelization code is always used for the P-CPICH, see [4];
- The P-CPICH is scrambled by the primary scrambling
code, see [4];- There is one and only one P-CPICH per cell;
- The P-CPICH is broadcast over the entire cell.
The Primary CPICH is a phase reference for the followingdownlink channels: SCH, Primary CCPCH, AICH, PICH AP-AICH,CD/CA-ICH, CSICH, DL-DPCCH for CPCH and the S-CCPCH. Bydefault, the Primary CPICH is also a phase reference fordownlink DPCH and any associated PDSCH. The UE is informed
by higher layer signalling if the P-CPICH is not a phase referencefor a downlink DPCH and any associated PDSCH.The Primary
CPICH is always a phase reference for a downlink physical
channel using closed loop TX diversity.
A Secondary Common Pilot Channel (S-CPICH) has the followingcharacteristics:
- An arbitrary channelization code of SF=256 is used for theS-CPICH, see [4];
- A S-CPICH is scrambled by either the primary or asecondary scrambling code,
- There may be zero, one, or several S-CPICH per cell;
- A S-CPICH may be transmitted over the entire cell or onlyover a part of the cell;
12 Confidential and Proprietary Information of ZTE CORPORATION
-
8/3/2019 2- Channel Structure and Function 26
16/25
-
8/3/2019 2- Channel Structure and Function 26
17/25
Channel Structure and function
Slot #0 Slot #1 Slot #i Slot #14
Tslot = 2560 chips, 20*2kbits (k=0..6
Pilot
Npilot bits
Data
Ndata1 bits
1 radio frame: Tf = 10 ms
TFCI
NTFCI bits
The parameter k in figure 17 determines the total number of bitsper downlink Secondary CCPCH slot. It is related to thespreading factor SF of the physical channel as SF = 256/2k. Thespreading factor range is from 256 down to 4. The FACH and
PCH can be mapped to the same or to separate Secondary
CCPCHs.
If FACH and PCH are mapped to the same Secondary CCPCH,they can be mapped to the same frame. The main differencebetween a CCPCH and a downlink dedicated physical channel isthat a CCPCH is not inner-loop power controlled. The main
difference between the Primary and Secondary CCPCH is thatthe transport channel mapped to the Primary CCPCH (BCH) can
only have a fixed predefined transport format combination, whilethe Secondary CCPCH support multiple transport format
combinations using TFCI.
Synchronous Channel (SCH)
The Synchronisation Channel (SCH) is a downlink signal used forcell search. The SCH consists of two sub channels, the Primary
and Secondary SCH. The 10 ms radio frames of the Primary andSecondary SCH are divided into 15 slots, each of length 2560chips. Figure illustrates the structure of the SCH radio frame.
PrimarySCH
SecondarySCH
256 chips
2560 chips
One 10 ms SCH radio frame
acs,
acp
acs,
acp
acs,
acp
Slot #0 Slot #1 Slot #14
The Primary SCH consists of a modulated code of length 256chips, the Primary Synchronisation Code (PSC) denoted cp infigure , transmitted once every slot. The PSC is the same for
every cell in the system.
The Secondary SCH consists of repeatedly transmitting a length15 sequence of modulated codes of length 256 chips, theSecondary Synchronisation Codes (SSC), transmitted in parallelwith the Primary SCH. The SSC is denoted cs
i,k in figure , where i
= 0, 1, , 63 is the number of the scrambling code group, and k
14 Confidential and Proprietary Information of ZTE CORPORATION
-
8/3/2019 2- Channel Structure and Function 26
18/25
Chapter 1 Chanel structure
= 0, 1, , 14 is the slot number. Each SSC is chosen from a setof 16 different codes of length 256. This sequence on theSecondary SCH indicates which of the code groups the cell'sdownlink scrambling code belongs to.
Physical Downlink Shared Channel (PDSCH)
The Physical Downlink Shared Channel (PDSCH) is used to carrythe Downlink Shared Channel (DSCH).
A PDSCH corresponds to a channelisation code below or at aPDSCH root channelisation code. A PDSCH is allocated on a radioframe basis to a single UE. Within one radio frame, UTRAN mayallocate different PDSCHs under the same PDSCH rootchannelisation code to different UEs based on code multiplexing.Within the same radio frame, multiple parallel PDSCHs, with thesame spreading factor, may be allocated to a single UE. This is aspecial case of multicode transmission. All the PDSCHs are
operated with radio frame synchronisation.
PDSCHs allocated to the same UE on different radio frames mayhave different spreading factors.
The frame and slot structure of the PDSCH are shown on figure .
Slot #0 Slot #1 Slot #i Slot #14
Tslot = 2560 chips, 20*2kbits (k=0..6)
Data
Ndata1 bits
1 radio frame: Tf= 10 ms
For each radio frame, each PDSCH is associated with one
downlink DPCH. The PDSCH and associated DPCH do notnecessarily have the same spreading factors and are not
necessarily frame aligned.
All relevant Layer 1 control information is transmitted on the
DPCCH part of the associated DPCH, i.e. the PDSCH does notcarry Layer 1 information. To indicate for UE that there is data
to decode on the DSCH, the TFCI field of the associated DPCH
shall be used.The TFCI informs the UE of the instantaneous transport formatparameters related to the PDSCH as well as the channelisation
code of the PDSCH.
Acqusition Indication Channel(AICH)
The Acquisition Indicator channel (AICH) is a fixed rate(SF=256) physical channel used to carry Acquisition Indicators
(AI). Acquisition Indicator AIs corresponds to signature s on thePRACH.
Figure illustrates the structure of the AICH. The AICH consists
of a repeated sequence of 15 consecutive access slots (AS),
Confidential and Proprietary Information of ZTE CORPORATION 15
-
8/3/2019 2- Channel Structure and Function 26
19/25
Channel Structure and function
each of length 5120 chips. Each access slot consists of twoparts, an Acquisition-Indicator (AI) part consisting of 32 real-valued symbols a0, , a31 and a part of duration 1024 chips withno transmission that is not formally part of the AICH. The part of
the slot with no transmission is reserved for possible use byCSICH or possible future use by other physical channels.
The spreading factor (SF) used for channelisation of the AICH is256.
The phase reference for the AICH is the Primary CPICH.
1024 chips
Transmission Of
AS #1 AS #0 AS #1 AS #i AS #1 AS #0
a1 a2a0 a31a30
AI part =4096 chips, 32 real-valued symbo
20 ms
CPCH Access Preamble Acqusition IndicationChannel (AP-AICH)
The Access Preamble Acquisition Indicator channel (AP-AICH) isa fixed rate (SF=256) physical channel used to carry APacquisition indicators (API) of CPCH. AP acquisition indicator APIscorresponds to AP signature s transmitted by UE.
AP-AICH and AICH may use the same or different channelisationcodes. The phase reference for the AP-AICH is the Primary
CPICH. Figure illustrates the structure of AP-AICH.
1024 chips
Transmission Off
AS #1 A S #0 AS # 1 AS #i AS #1 A S #0
a1 a2a0 a31a30
API part =4096 chips, 32 real-valued sym
20 ms
The AP-AICH has a part of duration 4096 chips where the APacquisition indicator (API) is transmitted, followed by a part ofduration 1024chips with no transmission that is not formally partof the AP-AICH. The part of the slot with no transmission isreserved for possible use by CSICH or possible future use byother physical channels.
CPCH Collision Detection/Channel Assignment Indicator
Channel (CD/CA -ICH)
The Collision Detection Channel Assignment Indicator
channel (CD/CA-ICH) is a fixed rate (SF=256) physical
16 Confidential and Proprietary Information of ZTE CORPORATION
-
8/3/2019 2- Channel Structure and Function 26
20/25
Chapter 1 Chanel structure
channel used to carry CD Indicator (CDI) only if the CA is notactive, or CD Indicator/CA Indicator (CDI/CAI) at the sametime if the CA is active. The structure of CD/CA-ICH is shownin figure .
1024 chips
Transmission Of
AS #1 AS #0 AS #1 AS #i AS #1 A S #0
a1 a2a0 a31a30
CDI/CAIpart =4096 chips, 32 real-valued sy
20 ms
CD/CA-ICH and AP-AICH may use the same or different
channelisation codes.
The CD/CA-ICH has a part of duration of 4096chips where theCDI/CAI is transmitted, followed by a part of duration 1024chipswith no transmission that is not formally part of the CD/CA-ICH.
The part of the slot with no transmission is reserved for possibleuse by CSICH or possible future use by other physical channels.
The spreading factor (SF) used for channelisation of the CD/CA-ICH is 256.
Paging Indication Channel (PICH)
The Paging Indicator Channel (PICH) is a fixed rate (SF=256)
physical channel used to carry the paging indicators. The PICH isalways associated with an S-CCPCH to which a PCH transportchannel is mapped.
Figure 24 illustrates the frame structure of the PICH. One PICH
radio frame of length 10 ms consists of 300 bits (b0, b1, , b299).Of these, 288 bits (b0, b1, , b287) are used to carry pagingindicators. The remaining 12 bits are not formally part of thePICH and shall not be transmitted (DTX). The part of the framewith no transmission is reserved for possible future use.
b1b0
288 b i ts for paging indication12 b i ts ( t ransmissi
off)
One radio f rame (10 ms)
b28 7b28 8 b29 9
In each PICH frame, Np paging indicators {P0, , PNp-1} are
transmitted, where Np=18, 36, 72, or 144.
The PI calculated by higher layers for use for a certain UE, isassociated to the paging indicator Pq, where q is computed as afunction of the PI computed by higher layers, the SFN of the P-
CCPCH radio frame during which the start of the PICH radio
Confidential and Proprietary Information of ZTE CORPORATION 17
-
8/3/2019 2- Channel Structure and Function 26
21/25
Channel Structure and function
frame occurs, and the number of paging indicators per frame(Np):
( )( )( ) NpNp
SFNSFNSFNSFNPIq mod144
144mod512/64/8/18
++++=
Further, the PI calculated by higher layers is associated with the
value of the paging indicator Pq. If a paging indicator in a certainframe is set to "1" it is an indication that UEs associated with
this paging indicator and PI should read the corresponding frameof the associated S-CCPCH.
The PI bitmap in the PCH data frames over Iub containsindication values for all higher layer PI values possible. Each bit
in the bitmap indicates if the paging indicator associated withthat particular PI shall be set to 0 or 1. Hence, the calculation in
the formula above is to be performed in Node B to make theassociation between PI and Pq..The mapping from {P0, , PNp-1}
to the PICH bits {b0, , b287} are according to Table 1
TA B L E 1 M A P P I N G O F P A G I N G I N D I C A T O R S P Q T O PICH B I T S
Number of paging
indicators perframe (Np)
Pq = 1 Pq = 0
Np=18{b16q, , b16q+15} ={1, 1,, 1}
{b16q, , b16q+15} ={0, 0,, 0}
Np=36{b8q, , b8q+7} = {1,1,, 1}
{b8q, , b8q+7} = {0,0,, 0}
Np=72 {b4q, , b4q+3} = {1,1,, 1} {b4q, , b4q+3} = {0,0,, 0}
Np=144 {b2q, b2q+1} = {1, 1} {b2q, b2q+1} = {0, 0}
Channel Mapping
Mapping between logical channels and transportchannels
Figure 10 illustrates the mapping between logical channel andtransport channels.
18 Confidential and Proprietary Information of ZTE CORPORATION
-
8/3/2019 2- Channel Structure and Function 26
22/25
Chapter 1 Chanel structure
F I G U R E 10 M A P P I N G B E T W E E N L O G I C A L C H A N N E L A N D T R A N S P O R T C H A N N E L S
Figure 11illustrates the mapping between transport channel and
physical channels.
F I G U R E 11 M A P P I N G B E T W E E N T R A N S P O R T C H A N N E L A N D P H Y S I C A L C H A N N E L S .
In addition to the transport channels introduced earlier, there
exist physical channels tocarry only information relevant tophysical layer procedures. The Synchronisation Channel(SCH),the Common Pilot Channel (CPICH) and the Acquisition
Indication Channel (AICH)are not directly visible to higher layersand are mandatory from the system function point ofview, to be
transmitted from every base station. The CPCH Status IndicationChannel(CSICH) and the Collision Detection/Channel Assignment
Indication Channel (CD/CA-ICH) are needed if CPCH is used.
Confidential and Proprietary Information of ZTE CORPORATION 19
-
8/3/2019 2- Channel Structure and Function 26
23/25
Channel Structure and function
Physical layer porcedure
Cell search procedure
During the cell search, the UE searches for a cell and determinesthe downlink scrambling code and frame synchronisation of thatcell. The cell search is typically carried out in three steps:
Step 1: slot synchronous
During the first step of the cell search procedure the UE uses the
SCHs primary synchronisation code to acquire slotsynchronisation to a cell. This is typically done with a single
matched filter (or any similar device) matched to the primary
synchronisation code which is common to all cells. The slottiming of the cell can be obtained by detecting peaks in thematched filter output.
Step 2: frame synchronous and code-group identification
During the second step of the cell search procedure, the UE usesthe SCHs secondary synchronisation code to find framesynchronisation and identify the code group of the cell found inthe first step. This is done by correlating the received signal withall possible secondary synchronisation code sequences, and
identifying the maximum correlation value. Since the cyclic shiftsof the sequences are unique the code group as well as the frame
synchronisation is determined.Step 3: scrambling-code identification
During the third and last step of the cell search procedure, theUE determines the exact primary scrambling code used by thefound cell. The primary scrambling code is typically identifiedthrough symbol-by-symbol correlation over the CPICH with allcodes within the code group identified in the second step. Afterthe primary scrambling code has been identified, the Primary
CCPCH can be detected.And the system- and cell specific BCHinformation can be read.
Random Access Procedure
At each initiation of the physical random access procedure,Layer 1 shall receive the following information from the higherlayers (MAC):
The Transport Format to be used for the PRACH messagepart.
The ASC of the PRACH transmission.
The data to be transmitted (Transport Block Set).
The physical random-access procedure shall be performed as
20 Confidential and Proprietary Information of ZTE CORPORATION
-
8/3/2019 2- Channel Structure and Function 26
24/25
Chapter 1 Chanel structure
follows:
1. Derive the available uplink access slots, in the next fullaccess slot set, for the set of available RACH sub-channels
within the ASC Randomly select one access slot among the
ones previously determined. If there is no access slotavailable in the selected set, randomly select one uplinkaccess slot corresponding to the set of available RACH sub-channels within the given ASC from the next access slot set.The random function shall be such that each of the allowedselections is chosen with equal probability.
2. Randomly select a signature from the set of availablesignatures within the given ASC. The random function shallbe such that each of the allowed selections is chosen withequal probability.
3. Set the Preamble Retransmission Counter to Preamble
Retrans Max.
4. Set the parameter Commanded Preamble Power to
Preamble_Initial_Power.
5. In the case that the Commanded Preamble Power exceedsthe maximum allowed value, set the preamble transmissionpower to the maximum allowed power. In the case that the
Commanded Preamble Power is below the minimum levelrequired in [7], set the preamble transmission power to a
value, which shall be at or above the Commanded PreamblePower and at or below the required minimum power specified
in [7]. Otherwise set the preamble transmission power to the
Commanded Preamble Power. Transmit a preamble using theselected uplink access slot, signature, and preambletransmission power.
6. If no positive or negative acquisition indicator (AI +1nor 1) corresponding to the selected signature isdetected in the downlink access slot corresponding to theselected uplink access slot:
1) Select the next available access slot in the set of available
RACH sub-channels within the given ASC.
2) Randomly select a new signature from the set of availablesignatures within the given ASC. The random function shall
be such that each of the allowed selections is chosen withequal probability.
3) Increase the Commanded Preamble Power by P0 = PowerRamp Step [dB]. If the Commanded Preamble Powerexceeds the maximum allowed power by 6dB, the UE maypass L1 status ("No ack on AICH") to the higher layers (MAC)
and exit the physical random access procedure.
4) Decrease the Preamble Retransmission Counter by one.
5) If the Preamble Retransmission Counter > 0 then repeatfrom step 5. Otherwise pass L1 status ("No ack on AICH") to
the higher layers (MAC) and exit the physical random access
Confidential and Proprietary Information of ZTE CORPORATION 21
-
8/3/2019 2- Channel Structure and Function 26
25/25
Channel Structure and function
procedure.
7. If a negative acquisition indicator corresponding to theselected signature is detected in the downlink access slot
corresponding to the selected uplink access slot, pass L1
status ("Nack on AICH received") to the higher layers (MAC)and exit the physical random access procedure.
8. Transmit the random access message three or four uplink
access slots after the uplink access slot of the lasttransmitted preamble depending on the AICH transmission
timing parameter. Transmission power of the control part of
the random access message should be P p-m [dB] higherthan the power of the last transmitted preamble.
9. Pass L1 status "RACH message transmitted" to the higherlayers and exit the physical random access procedure.
22 Confidential and Proprietary Information of ZTE CORPORATION
GSM 1800