รายชื่อเอกสารใหม่ 2560) acceptance (approval)...

รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 1

รายชอเอกสารใหม (เมษายน-มถนายน 2560)

ACCEPTANCE (APPROVAL) IEC

IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ACCEPTANCE INSPECTION IEC

IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ADHESIVES ISO ISO/TS 11405 2015 Dentistry - Testing of adhesion to tooth structure /By

International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.

AIRCRAFT COMPONENTS IEC IEC TS 62686-1 2015 Process management for avionics - Electronic components

for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ALTERNATING CURRENT IEC IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital

communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.


ALUMINIUM ISO

ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

AMPLIFIERS IEC

IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

ANALOGUE SIGNALS IEC

IEC 62014-5 2015 Quality of electronic and software intellectual property used in system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

APPROVAL ORGANIZATIONS ISO

ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.

ARC-WELDING EQUIPMENT IEC

IEC 60974-10 2014 Are welding equipment - P.10: Electromagnetic compatibility (EMC) requirements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2014.

ARTIFICIAL WEATHERING TESTS IEC

IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.


ASSESSED QUALITY IEC IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product

requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing

audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.

ATOMIC ABSORPTION SPECTROPHOTOMETRY IEC

IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

AUDIO EQUIPMENT IEC IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia

systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

AUTOMATIC CONTROL SYSTEMS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and

communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

AXIAL STRESS IEC IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices -

P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


BATTERY CHARGERS IEC

IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.

BATTERY-POWERED DEVICES IEC


BETA-PARTICLES ISO

ISO 9697 2015 Water quality - Gross beta activity in non-saline water - Test method using thick source /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.

BIOFUELS ISO


ISO 16968 2015 Solid biofuels - Determination of minor elements /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

BIOMASS ISO






BUS NETWORKS

IEC

IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

BUSHES (MECHANICAL COMPONENTS) IEC

IEC 60940 2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

CALCIUM ISO


CALIBRATION IEC

IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

CAPACITORS IEC



CAPS (CLOSURES) IEC IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps

(excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

CATERING EQUIPMENT IEC IEC TS 62835 2015 Electric toasters for household and similar use - Methods and

measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

CERAMICS ISO ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for

Standardization (ISO). 4th ed. Geneva: ISO, 2015. CERTIFICATION (APPROVAL) ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing


CERTIFICATION BODIES ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing


CHEMICAL ANALYSIS AND TESTING ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16968 2015 Solid biofuels - Determination of minor elements /By

International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and

chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,

sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray

fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.


ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2015.

CHEMICAL COMPOSITION ISO ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray


CHEMICAL-RESISTANCE TESTS IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for

measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

CHLORIDES ISO ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,

sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

CHLORINE ISO ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and

chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

CLEARANCE DISTANCES IEC IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2:

d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015. COAXIAL CONNECTORS IEC IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for

radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω; (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


COMBUSTION TEST METHODS ISO ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and


COMMERCE ISO ISO 14533-1 2014 Processes, data elements and documents in commerce, industry

and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.

COMMUNICATION CABLES

IEC

IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

IEC 61196-1-100 2015 Coaxial communication cables - P.1-100: Electrical methods - General requirements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

COMMUNICATION EQUIPMENT

IEC


COMMUNICATION NETWORKS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and


COMMUNICATION PROCEDURES IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and



COMPUTER HARDWARE IEC IEC 62014-5 2015 Quality of electronic and software intellectual property used in

system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

COMPUTER NETWORKS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and


COMPUTER PERIPHERAL EQUIPMENT IEC IEC 62014-5 2015 Quality of electronic and software intellectual property used in

system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

COMPUTER SOFTWARE

IEC


COOKING APPLIANCES

IEC

IEC TS 62835 2015 Electric toasters for household and similar use - Methods and measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

COPPER

IEC

IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.


CUTTING TOOLS IEC

IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.

DATA ELEMENTS ISO

ISO 14533-1 2014 Processes, data elements and documents in commerce, industry and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.

DATA PROCESSING IEC


DATA TRANSMISSION IEC

IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


DENTAL MATERIALS ISO


ISO/TS 11405 2015 Dentistry - Testing of adhesion to tooth structure /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.


DENTAL PROSTHESIS ISO



DENTISTRY ISO



DETECTORS (CIRCUITS) IEC

IEC 61243-3 2014 Live working - Voltage detectors - P.3: Two-pole low-voltage type /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2014.

DIAMOND TOOLS IEC


DIELECTRIC DEVICES IEC

IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

DIGITAL SIGNALS IEC



DIGITAL SIGNATURES ISO


DIRECT CURRENT IEC


DISCHARGE LAMPS IEC

IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

DISPLAY DEVICES IEC

IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection - Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

DISPLAY DEVICES (COMPUTERS) IEC

IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


DRILLING MACHINES IEC


DRY-TYPE TRANSFORMERS IEC

IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ECONOMIC DEVELOPMENT ISO

ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

ELECTRIC CABLES IEC IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic

optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

IEC 61196-1-100 2015 Coaxial communication cables - P.1-100: Electrical methods General requirements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ELECTRIC CHARGE IEC



ELECTRIC CONDUCTORS IEC



ELECTRIC CONNECTORS IEC




IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ELECTRIC CONVERTORS IEC IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International

Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ELECTRIC ENCLOSURES IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control

and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.


ELECTRIC INSULATORS

IEC


ELECTRIC MOTORS

IEC


ELECTRIC POWER SYSTEMS

IEC

IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2: d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ELECTRIC POWER TRANSMISSION

IEC


ELECTRIC SUBSTATIONS

IEC


ELECTRIC TERMINALS

IEC



ELECTRIC WIRES IEC


ELECTRICAL COMPONENTS IEC



IEC 61010-2-051 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.








ELECTRICAL CONDUCTANCE IEC


ELECTRICAL CONNECTIONS

IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control



ELECTRICAL ENGINEERING

IEC

IEC 60079-5 2015 Explosive atmospheres - P.5: Equipment protection by powder filling "q" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.

IEC 60079-6 2015 Explosive atmospheres - P.6: Equipment protection by liquid immersion "o" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.

IEC 60364-7-722 2015 Low-voltage electrical installations - P.7-722: Requirements for special installations or locations - Supplies for electric vehicles /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ELECTRICAL EQUIPMENT IEC IEC 60079-32-2 2015 Explosive atmospheres - P.32-2: Electrostatics hazards - Tests

/By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.







IEC TS 60079-40 2015 Explosive atmospheres - P.40: Requirements for process sealing between flammable process fluids and electrical systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ELECTRICAL HOUSEHOLD APPLIANCES IEC IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia



ELECTRICAL INSTALLATIONS IEC




ELECTRICAL INSULATION IEC IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2:

d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ELECTRICAL INSULATION DEVICES IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass

insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ELECTRICAL MEASURING INSTRUMENTS IEC



ELECTRICAL SAFETY IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for





ELECTRICAL TESTING IEC




ELECTRICALLY-OPERATED DEVICES

IEC




ELECTROMAGNETIC COMPATIBILITY (EMC)

IEC

IEC 60974-10 2014 Are welding equipment - P.10: Electromagnetic compatibility (EMC) requirements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2014.

IEC 61000-4-30 2015 Electromagnetic compatibility (EMC) - P.4-30: Testing and measurement techniques - Power quality measurement methods /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.


ELECTROMECHANICAL DEVICES IEC

IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices - P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ELECTRONIC EQUIPMENT AND COMPONENTS IEC

IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.















ELECTRONIC SIGNATURES ISO ISO 14533-1 2014 Processes, data elements and documents in commerce,

industry and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.

ENAMELLED WIRES IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided

resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.


ENDURANCE TESTING IEC IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL

dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


ENVIRONMENTAL MANAGEMENT ISO


ENVIRONMENTAL TESTING IEC




EQUIPMENT SAFETY IEC


EXPLOSIVE ATMOSPHERES IEC IEC 60079-5 2015 Explosive atmospheres - P.5: Equipment protection by powder

filling "q" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.


IEC 60079-6 2015 Explosive atmospheres - P.6: Equipment protection by liquid immersion "o" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.

IEC 60079-32-2 2015 Explosive atmospheres - P.32-2: Electrostatics hazards - Tests /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

IEC TS 60079-40 2015 Explosive atmospheres - P.40: Requirements for process sealing between flammable process fluids and electrical systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

EXTRACTION METHODS OF ANALYSIS ISO ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,


FIBRE OPTIC CABLES IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test

procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.



FIBRE OPTIC CONNECTORS IEC IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components

- Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


FIBRE OPTICS IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test




IEC


FIELD TESTING ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by

near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.

FIELDBUS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and


FREQUENCY CONTROL IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control



FUELS ISO





GAIN CONTROL IEC IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain

parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

GLASS FIBRES IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided


GRADES (QUALITY)

IEC


GROUND WATER

ISO

ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.


HALIDE LAMPS

IEC


HIGH VOLTAGE

IEC


HIGH-VOLTAGE INSTALLATIONS

IEC



HIGH-VOLTAGE TESTS

IEC


HOUSEHOLD EQUIPMENT

IEC


INDUSTRIAL ELECTRICAL INSTALLATIONS

IEC



INSULATED WIRES

IEC


INTEGRATED CIRCUITS

IEC


INTENSITY

IEC


INTERFACES

IEC


INTERFACES (DATA PROCESSING)

IEC





IONIZATION IEC IEC 61010-2-061 2015 Safety requirements for electrical equipment for

measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

IRON ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. LABORATORY EQUIPMENT IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for



LASERS IEC IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain


LIGHTING EQUIPMENT IEC IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps


LIQUID CRYSTAL DEVICES IEC IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection -

Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


LIQUID CRYSTAL DISPLAYS IEC IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection -

Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

LOW VOLTAGE IEC IEC 60364-7-722 2015 Low-voltage electrical installations - P.7-722: Requirements

for special installations or locations - Supplies for electric vehicles /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

MACHINE TOOLS IEC


MAGNESIUM ISO


MECHANICAL MEASUREMENT IEC


MECHANICAL TESTING IEC IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic





METALS IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control


MULTIMEDIA SYSTEMS

IEC


NATURAL RUBBER

ISO

ISO 1656 2014 Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014.

NETWORK LAYER (OSI)

IEC


NUCLEAR-ELECTRIC POWER STATIONS

IEC


NUCLEAR POWER

IEC



NUCLEAR REACTORS IEC


OIL-IMMERSED TRANSFORMERS IEC


OPEN SYSTEMS INTERCONNECTION IEC


OPTICAL AMPLIFIERS IEC


OPTICAL COMMUNICATION SYSTEMS IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test



OPTICAL FIBRES IEC






OPTICAL MEASUREMENT IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test




OPTOELECTRONIC DEVICES IEC






PANELS IEC IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL


PERFORMANCE TESTING IEC



PHOSPHORUS ISO


PHYSICAL PROPERTIES OF MATERIALS ISO


PIEZOELECTRIC DEVICES IEC



PIEZOELECTRIC MATERIALS IEC


PIPES BSI

PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.

PIPEWORK SYSTEMS BSI PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for

drainage and sewerage under pressure - Polyethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.

PLASMA DISPLAY DEVICES IEC IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL



PLASMA DISPLAYS IEC IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL



PLASTICS AND RUBBER TECHNOLOGY ISO ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect

of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015.


POLLUTION IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass


POLYETHYLENE BSI PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for

drainage and sewerage under pressure - Polyethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.

PORTABLE MACHINE TOOLS IEC IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools

and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.

POTASSIUM ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,

sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015. POTENTIOMETERS (RESISTORS) IEC IEC 60940 2015 Guidance information on the application of capacitors, resistors,

inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

POWER TRANSFORMERS IEC IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International

Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015. PROBES IEC IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important

to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


PROCESS CONTROL IEC

IEC 61285 2015 Industrial-process control - Safety of analyser houses /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.


PROTECTED ELECTRICAL EQUIPMENT IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for



QUALIFICATION APPROVAL IEC IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components



QUALITY ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements

for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.


QUALITY ASSURANCE SYSTEMS IEC IEC TS 62686-1 2015 Process management for avionics - Electronic components

for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing


QUALITY AUDITING ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing


QUALITY MANAGEMENT ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing


RADIATION MEASUREMENT ISO ISO 9697 2015 Water quality - Gross beta activity in non-saline water - Test

method using thick source /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.

RADIOCOMMUNICATION IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and


RADIOFREQUENCIES IEC IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for




RATED VOLTAGE IEC



RECORDS (DOCUMENTS) ISO


RESILIENCE ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements


RESISTANCE MEASUREMENT IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for


RESISTORS IEC IEC 60940 2015 Guidance information on the application of capacitors, resistors,

inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.


ROAD VEHICLES IEC IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital

communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.

RUBBER ISO ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect

of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015. SAFETY

IEC


SAFETY DEVICES

IEC


SAFETY MEASURES IEC





SAMPLING METHODS IEC


SEMICONDUCTOR DEVICES IEC IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International

Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015. IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL





SEMICONDUCTOR TECHNOLOGY

IEC


SEMICONDUCTORS IEC



SIGNAL PROCESSING

IEC IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain


SIGNAL STRENGTH

IEC IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain


SILICON

ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

SODIUM ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,


SODIUM-VAPOUR LAMPS IEC IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps


SOIL CLASSIFICATION TESTS ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by



SOIL SAMPLING ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by


SOIL SURVEYS ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by


SOIL TESTING ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by


SOILS ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by


ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.

SOILS - QUALITY ISO

ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.


SOLID FUELS ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16968 2015 Solid biofuels - Determination of minor elements /By

International Organization for Standardization (ISO). Geneva: ISO, 2015.




SPECIAL CERAMICS ISO


SPECIFICATION (APPROVAL) IEC






SPECTROPHOTOMETRY ISO



SPECTROSCOPY IEC IEC 61010-2-061 2015 Safety requirements for electrical equipment for


STABILITY IEC IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools

and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.

STIRRERS (LABORATORY) IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for


SULFUR ISO ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and


SURFACE MOUNTING IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control


SURFACE MOUNTING DEVICES IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control



SUSTAINABILITY ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements


SUSTAINABLE DEVELOPMENT ISO


SWITCHGEAR IEC


SWITCHING SUBSTATIONS IEC


SYNTAX IEC


SYNTHETIC RUBBER ISO ISO 1656 2014 Rubber, raw natural, and rubber latex, natural - Determination of

nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014.

TELEVISION IEC



TEMPERATURE IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided


TEMPERATURE MEASUREMENT IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test


TENSILE TESTING IEC IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices -


TEST EQUIPMENT IEC IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic




TEST METHODS IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test




ISO


TEST SPECIMENS IEC


ISO

ISO 1656 2014 Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014.



TESTING

IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass


TESTING CONDITIONS IEC IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for







THERMAL ANALYSIS IEC IEC 61010-2-061 2015 Safety requirements for electrical equipment for


THERMAL RESISTANCE IEC



THERMAL-SHOCK RESISTANCE IEC


THERMOPLASTIC POLYMERS ISO ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect



THIN FILMS IEC IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices -


TITANIUM ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

TOASTERS IEC IEC TS 62835 2015 Electric toasters for household and similar use - Methods and

measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

TOWN ORGANIZATIONS ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements


TRACE ELEMENT ANALYSIS ISO ISO 16968 2015 Solid biofuels - Determination of minor elements /By

International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray


TRANSFORMERS IEC

IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2015.

TRANSMITTERS IEC



TRANSPORTABLE IEC


TYPE TESTING IEC


URBAN AREAS ISO


VARIABLE CAPACITORS IEC


VARIABLE RESISTORS

IEC


VARNISHED PRODUCTS

IEC



VERIFICATION

ISO


IEC IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia


VIDEO TAPE RECORDERS IEC


VISUAL INSPECTION (TESTING) IEC IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components



VOLTAGE IEC


VULCANIZED MATERIALS ISO

ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015.


VULCANIZED RUBBER ISO ISO 1656 2014 Rubber, raw natural, and rubber latex, natural - Determination of

nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014. ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect


WASTES ISO



WATER ISO


WATER - QUALITY ISO


WATER SUPPLY BSI

PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.

IEC



WATER TESTING ISO


WINDINGS IEC


WIRES IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided


X-RAY FLUORESCENCE SPECTROMETRY ISO



มาตรฐานไทย

จกรยานยนต - ชนสวน มอก. 97 2557 ผาเบรกส าหรบยานยนต

ดวงโคมไฟฟา มอก. 902-2557 ดวงโคมไฟฟา

เลม 1 - 2557 คณลกษณะทตองการทวไปและการทดสอบ

เลม 2(1) - 2557 ดวงโคมไฟฟาตดประจ าทส าหรบจดประสงคทวไป

เลม 2(2) - 2557 ดวงโคมไฟฟาฝง

เลม 2(3) - 2557 ดวงโคมไฟฟาส าหรบใหแสงสวางบนถนน

เลม 2(4) - 2557 ดวงโคมไฟฟาเคลอนยายไดส าหรบจดประสงคทวไป

เลม 2(5) - 2557 ดวงโคมไฟฟาสาดแสง

เลม 2(6) - 2557 ดวงโคมไฟฟามอถอ

เลม 2(7) - 2557 ดวงโคมไฟฟาใชในทเลยงสตวน าและพชน า

เลม 2(8) - 2557 ดวงโคมไฟฟาใหแสงกลางคนตดตงกบเตารบไฟฟาประธาน

เลม 2(9) - 2557 ดวงโคมไฟฟาฝงพน

เลม 2(10) - 2557 ดวงโคมไฟฟาส าหรบสระวายน าและการใชงานทคลายกน

เลม2(12) - 2557 ดวงโคมไฟฟาจ ากดอณหภมพนผว

ผาเบรก มอก. 97 2557 ผาเบรกส าหรบยานยนต

ฟาผา - การปองกน มอก. 1586 ล.4 - 2557 การปองกนฟาผา เลม 4 ระบบไฟฟาและอเลกทรอนกสภายในสงปลกสราง

รถยนต - ชนสวน มอก. 97 - 2557 ผาเบรกส าหรบยานยนต

ระบบปองกนฟาผา มอก. 1586 ล.4 - 2557 การปองกนฟาผา เลม 4 ระบบไฟฟาและอเลกทรอนกสภายในสงปลกสราง

วสดและอปกรณไฟฟา มอก. 902-2557 ดวงโคมไฟฟา

เลม 1- 2557 คณลกษณะทตองการทวไปและการทดสอบ


เลม 2(1) - 2557 ดวงโคมไฟฟาตดประจ าทส าหรบจดประสงคทวไป

เลม 2(2) - 2557 ดวงโคมไฟฟาฝง

เลม 2(3) - 2557 ดวงโคมไฟฟาส าหรบใหแสงสวางบนถนน

เลม 2(4) - 2557 ดวงโคมไฟฟาเคลอนยายไดส าหรบจดประสงคทวไป

เลม 2(5) - 2557 ดวงโคมไฟฟาสาดแสง

เลม 2(6) - 2557 ดวงโคมไฟฟามอถอ

เลม 2(7) - 2557 ดวงโคมไฟฟาใชในทเลยงสตวน าและพชน า

เลม 2(8) - 2557 ดวงโคมไฟฟาใหแสงกลางคนตดตงกบเตารบไฟฟาประธาน

เลม 2(9) - 2557 ดวงโคมไฟฟาฝงพน

เลม 2(10) - 2557 ดวงโคมไฟฟาส าหรบสระวายน าและการใชงานทคลายกน

เลม2(12) - 2557 ดวงโคมไฟฟาจ ากดอณหภมพนผว


Alphabetical Subject Index

Subject Page

Acceptance (approval) 1

Acceptance inspection 1

Adhesives 1

Aircraft components 1

Alternating current 1

Aluminium 2

Amplifiers 2

Analogue signals 2

Approval organizations 2

Arc-welding equipment 2

Artificial weathering tests 2

Assessed quality 3

Atomic absorption spectrophotometry 3

Audio equipment 3

Automatic control systems 3

Axial stress 3

Battery chargers 4

Battery-powered devices 4

Beta-Particles 4

Biofuels 4

Biomass 4

Bus networks 5


Subject Page

Bushes (mechanical components) 5

Calcium 5

Calibration 5

Capacitors 5

Caps (closures) 6

Catering equipment 6

Ceramics 6

Certification (approval) 6

Certification bodies 6

Chemical analysis and testing 6

Chemical composition 7

Chemical-resistance tests 7

Chlorides 7

Chlorine 7

Clearance distances 7

Coaxial connectors 7

Combustion test methods 8

Commerce 8

Communication cables 8

Communication equipment 8

Communication networks 8

Communication procedures 8

Computer hardware 9


Subject Page

Computer networks 9

Computer peripheral equipment 9

Computer software 9

Cooking appliances 9

Copper 9

Cutting tools 10

Data elements 10

Data processing 10

Data transmission 10

Dental materials 10

Dental prosthesis 11

Dentistry 11

Detectors (circuits) 11

Diamond tools 11

Dielectric devices 11

Digital signals 11

Direct current 12

Discharge lamps 12

Display devices 12

Display devices (computers) 12

Drilling machines 13

Dry-type transformers 13

Economic development 13


Subject Page

Electric cables 13

Electric charge 13

Electric conductors 14

Electric connectors 14

Electric convertors 14

Electric enclosures 14

Electric insulators 15

Electric motors 15

Electric power systems 15

Electric power transmission 15

Electric substations 15

Electric terminals 15

Electric wires 16

Electrical components 16

Electrical conductance 17

Electrical connections 17

Electrical engineering 17

Electrical equipment 17

Electrical household appliances 18

Electrical installations 18

Electrical insulation 19

Electrical insulation devices 19

Electrical measuring instruments 19


Subject Page

Electrical safety 19

Electrical testing 20

Electrically-operated devices 20

Electromagnetic compatibility (EMC) 20

Electromechanical devices 21

Electronic equipment and components 21

Electronic signatures 22

Enamelled wires 22

Endurance testing 23

Environmental management 23

Environmental testing 23

Equipment safety 23

Explosive atmospheres 23

Extraction methods of analysis 24

Fibre optic cables 24

Fibre optic connectors 24

Fibre optics 25

Field testing 25

Fieldbus 25

Frequency control 25

Fuels 26

Gain control 26

Glass fibres 26


Subject Page

Grades (quality) 26

Ground water 26

Halide lamps 27

High voltage 27

High-voltage installations 27

High-voltage tests 27

Household equipment 27

Industrial electrical installations 27

Insulated wires 28

Integrated circuits 28

Intensity 28

Interfaces 28

Interfaces (data processing) 28

Ionization 29

Iron 29

Laboratory equipment 29

Lasers 29

Lighting equipment 29

Liquid crystal devices 29

Liquid crystal displays 30

Low voltage 30

Machine tools 30

Magnesium 30


Subject Page

Mechanical measurement 30

Mechanical testing 30

Metals 31

Multimedia systems 31

Natural rubber 31

Network layer (OSI) 31

Nuclear-electric power stations 31

Nuclear power 31

Nuclear reactors 32

Oil-immersed transformers 32

Open systems interconnection 32

Optical amplifiers 32

Optical communication systems 32

Optical fibres 32

Optical measurement 33

Optoelectronic devices 33

Panels 34

Performance testing 34

Phosphorus 34

Physical properties of materials 34

Piezoelectric devices 34

Piezoelectric materials 35

Pipes 35


Subject Page

Pipework systems 35

Plasma display devices 35

Plasma displays 35

Plastics and rubber technology 35

Pollution 36

Polyethylene 36

Portable machine tools 36

Potassium 36

Potentiometers (resistors) 36

Power transformers 36

Probes 36

Process control 37

Protected electrical equipment 37

Qualification approval 37

Quality 37

Quality assurance systems 38

Quality auditing 38

Quality management 38

Radiation measurement 38

Radiocommunication 38

Radiofrequencies 38

Rates voltage 39

Records (documents) 39


Subject Page

Resilience 39

Resistance measurement 39

Resistors 39

Road vehicles 40

Rubber 40

Safety 40

Safety devices 40

Safety measures 40

Sampling methods 41

Semiconductor devices 41

Semiconductor technology 41

Semiconductors 41

Signal processing 42

Signal strength 42

Silicon 42

Sodium 42

Sodium-vapour lamps 42

Soil classification tests 42

Soil sampling 43

Soil surveys 43

Soil testing 43

Soils 43

Soils - Quality 43


Subject Page

Solid fuels 43

Special ceramics 44

Specification (approval) 44

Spectrophotometry 44

Spectroscopy 45

Stability 45

Stirrers (laboratory) 45

Sulfur 45

Surface mounting 45

Surface mounting devices 45

Sustainability 46

Sustainable development 46

Switchgear 46

Switching substations 46

Syntax 46

Synthetic rubber 46

Television 46

Temperature 47

Temperature measurement 47

Tensile testing 47

Test equipment 47

Test methods 47

Test specimens 48


Subject Page

Testing 48

Testing conditions 48

Thermal analysis 49

Thermal resistance 49

Thermal-shock resistance 49

Thermoplastic polymers 49

Thin films 50

Titanium 50

Toasters 50

Town organizations 50

Trace element analysis 50

Transformers 50

Transmitters 50

Transportable 51

Type testing 51

Urban areas 51

Variable capacitors 51

Variable resistors 51

Varnished products 51

Verification 52

Video tape recorders 52

Visual inspection (testing) 52

Voltage 52


Subject Page

Vulcanized materials 52

Vulcanized rubber 53

Wastes 53

Water 53

Water - Quality 53

Water supply 53

Water testing 54

Windings 54

Wires 54

X-ray fluorescence spectrometry 54


ดรรชนหวเรอง

หวเรอง หนา

จกรยานยนต - ชนสวน 55

ดวงโคมไฟฟา 55

ผาเบรก 55

ฟาผา - การปองกน 55

รถยนต - ชนสวน 55

ระบบปองกนฟาผา 55

วสดและอปกรณไฟฟา 55

รายชื่อเอกสารใหม่ 2560) acceptance (approval)...

Documents