tisi library accession list acceptance...

TISI Library Accession List (Oct-Dec 2010)

TISI Library Accession List (October-December 2010)

ACCEPTANCE SPECIFICATION ISO

ISO 10360-2 2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - P. CMMs used for measuring linear dimensions /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

ACOUSTICS ISO ISO 11201 2010 Acoustics - Noise emitted by machinery and equipment - Determination of

emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 11202 2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 11204 2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

AGRICULTURAL PRODUCTS ISO

ISO 6571 2008 Spices, condiments and herbs - Determination of volatile oil content

(hydrodistillation method) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


AIR ISO

ISO 16000-23 2009 Indoor air - P. 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 16000-24 2009 Indoor air - P. 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

AIR-CONDITIONING EQUIPMENT ISO

ISO 5151 2010 Non-ducted air conditioners and heat pumps - Testing and rating for performance /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

AIR FILTERS - CLASSIFICATION SYSTEMS BSI

BS EN 1822-1 2009 High efficiency air filters (EPA, HEPA and ULPA) - P. 1: Classification, performance testing, marking /By British Standards Institution (BSI). London: BSI, 2009.

AIR FILTERS - PERFORMANCE TESTING BSI


AIR FILTERS - TESTING CONDITIONS BSI

BS EN 1822-2 2009 High efficiency air filters (EPA, HEPA and ULPA) - P. 2: Aerosol production, measuring equipment, particle counting statistics /By British Standards Institution (BSI). London: BSI, 2009.


BS EN 1822-3 2009 High efficiency air filters (EPA, HEPA and ULPA) - P. 3: Testing flat sheet filter media /By British Standards Institution (BSI). London: BSI, 2009.

ANCHORS BSI BS 7883 2005 Code of practice for the design, selection, installation, use and maintenance of

anchor devices conforming to BS EN 795 /By British Standards Institution (BSI). London: BSI, 2007.

ANIMAL FEED ISO ISO 12099 2010 Animal feeding stuffs, cereals and milled cereal products - Guidelines for the

application of near infrared spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the

preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

BAR CODES ISO ISO/IEC 15417 2007 Information technology - Automatic identification and data capture

techniques - Code 128 bar code symbology specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO/IEC 16390 2007 Information technology - Automatic identification and data capture techniques - Interleaved 2 of 5 bar code symbology specification /By International Organization for

Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

BIOLOGICAL ANALYSIS AND TESTING ISO ISO 10993-10 2010 Biological evaluation of medical devices - P. 10: Tests for irritation and skin

sensitization /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.


BOARD (PAPER) ISO ISO 2470-1 2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor -

P. 1: Indoor daylight conditions (ISO brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 2470-2 2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor - P. 2: Outdoor daylight conditions (D65 brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 5631-1 2009 Paper and board - Determination of colour by diffuse reflectance - P. 1: Indoor daylight conditions (C/2 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 5631-2 2008 Paper and board - Determination of colour by diffuse reflectance - P. 2:

Outdoor daylight conditions (D65/10 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 11476 2010 Paper and board - Determination of CIE whiteness, C/2º (indoor illumination conditions) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

BREAKING LOAD ISO

ISO 2062 2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

CEMENTS BSI

BS EN 634-2 2007 Cement-bonded particleboards - Specifications - P. 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions /By British Standards Institution (BSI). London; BSI, 2007.


CEREAL PRODUCTS ISO ISO 12099 2010 Animal feeding stuffs, cereals and milled cereal products - Guidelines for the


ISO 24333 2009 Cereals and cereal products - Sampling /By International Organization for

Standardization (ISO). Geneva: ISO, 2009.

CEREALS ISO ISO 12099 2010 Animal feeding stuffs, cereals and milled cereal products - Guidelines for the


ISO 24333 2009 Cereals and cereal products - Sampling /By International Organization for


CETANE NUMBER

ISO ISO 4264 2007 Petroleum products - Calculation of cetane index of middle-distillate fuels by

the four-variable equation /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO; 2007.

CHEMICAL ANALYSIS AND TESTING AOAC International

630.243 A363O Official methods of analysis of AOAC International /By William Horwitz editor, AOAC International and George W. Latimer editor. 18th ed. Gaithersburg: AOAC International, 2010.

ISO

ISO 9026 2007 Raw rubber or unvulcanized compounds - Determination of green strength /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.


CHEMISTRY - ANALYSIS

AOAC International


COATED FABRICS ISO

ISO 6179 2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.

COLOUR ISO

ISO 5631-1 2009 Paper and board - Determination of colour by diffuse reflectance - P. 1: Indoor daylight conditions (C/2 ) /By International Organization for Standardization (ISO). Geneva: ISO,

2009.

ISO 5631-2 2008 Paper and board - Determination of colour by diffuse reflectance - P. 2: Outdoor daylight conditions (D65/10 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

COMPRESSED-AIR SYSTEMS ISO

ISO 7183 2007 Compressed-air dryers - Specifications and testing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

COOLING SYSTEMS ISO

ISO 4081 2010 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.



CREEP TESTING ISO

ISO 8013 2006 Rubber, vulcanized - Determination of creep in compression or shear /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

DANGEROUS MATERIALS ISO

ISO 23667 2007 Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

DATA LAYOUT ISO

ISO/IEC 19794-7 2007 Information technology - Biometric data interchange formats - P. 7: Signature/sign time series data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO/IEC 19794-9 2007 Information technology - Biometric data interchange formats - P. 9: Vascular image data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO/IEC 19794-10 2007 Information technology - Biometric data interchange formats - P. 10: Hand geometry silhouette data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

DATA PROCESSING ISO

ISO/IEC TR 15504-7 2008 Information technology - Process assessment - P. 7: Assessment of

organizational maturity /By International Organization for Standardization (ISO). Geneva: ISO, 2008.


DENTAL PROSTHESIS ISO

ISO 20795-2 2010 Dentistry - Base polymers - P. 2: Orthodontic base polymers /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

DENTISTRY ISO

ISO 9917-2 2010 Dentistry - Water-based cements - P. 2: Resin-modified cements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 10451 2010 Dentistry - Contents of technical file for dental implant systems /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 20795-2 2010 Dentistry - Base polymers - P. 2: Orthodontic base polymers /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

ISO 28158 2010 Dentistry - Integrated dental floss and handles /By International Organization

for Standardization (ISO). Geneva: ISO, 2010.

DESIGN ISO ISO 9809-1 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction

and testing - P. 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 9809-2 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - P. 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 9809-3 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction

and testing - P. 3: Normalized steel cylinders /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO; 2010.


DIESEL FUELS ISO

ISO 12156-1 2006 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - P. 1: Test method /By International Organization for Standardization (ISO). 2nd ed. Geneva:

ISO, 2006.

DIMENSIONAL TOLERANCES ISO

ISO 8062-3 2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - P. 3: General dimensional and geometrical tolerances and machining allowances for castings /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

DISHWASHING MACHINES ISO

ISO 6804 2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and

dishwashers - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

ELECTRIC CABLES BSI

BS 7846 2009 Electric cables - Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V, having low emission of smoke and corrosive gases when affected by fire - Specification /By British Standards Institution (BSI). 3rd ed. London: BSI, 2009.

BS 8434-2 2003 Methods of test for assessment of the fire integrity of electric cables - P. 2:

Test for unprotected small cables for use in emergency circuits - BS EN 50200 with a 930 C flame and with water spray /By British Standards Institution (BSI). London: BSI, 2009.


ELONGATION ISO

ISO 2062 2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester /By International Organization for

Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

EQUIPMENT SAFETY ISO

ISO 13857 2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ESSENTIAL OILS ISO

ISO 3053 2004 Oil of grapefruit (Citrus x paradisi Macfad), obtained by expression /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

FILTRATION ISO ISO 10307-1 2009 Petroleum products - Total sediment in residual fuel oils - P. 1: Determination

by hot filtration /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

FIRE HOSES ISO ISO 4642-1 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 1:

Semi-rigid hoses for fixed systems /By International Organization for Standardization (ISO). Geneva: ISO, 2009.


ISO 4642-2 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

FIRE RESISTANCE BSI BS 7846 2009 Electric cables - Thermosetting insulated, armoured, fire-resistant cables of

rated voltage 600/1 000 V, having low emission of smoke and corrosive gases when affected by fire - Specification /By British Standards Institution (BSI). 3rd ed. London: BSI, 2009.

BS 8434-2 2003 Methods of test for assessment of the fire integrity of electric cables - P. 2: Test for unprotected small cables for use in emergency circuits - BS EN 50200 with a 930 C flame and with water spray /By British Standards Institution (BSI). London: BSI, 2009.

FIREFIGHTING EQUIPMENT ISO

ISO 4642-1 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 1: Semi-rigid hoses for fixed systems /By International Organization for Standardization (ISO). Geneva: ISO,

2009.


FLEXIBLE PIPES ISO

ISO 1436 2009 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification /By International Organization for Standardization (ISO).

4th ed. Geneva: ISO, 2009.


ISO 3862 2009 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification /By International Organization for

Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

ISO 4081 2010 Rubber hoses and tubing for cooling systems for internal-combustion engines -

Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.

ISO 4642-1 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 1:

Semi-rigid hoses for fixed systems /By International Organization for Standardization (ISO). Geneva: ISO,

2009.

ISO 4642-2 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles /By International Organization for


ISO 5771 2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia -


ISO 6804 2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva:

ISO, 2009.

ISO 8789 2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor

vehicles - Specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

FLOW MEASUREMENT ISO

ISO 4360 2008 Hydrometry - Open channel flow measurement using triangular profile weirs /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

FOOD ANALYSIS AOAC International



FOOD CONTROL ISO

ISO 22006 2009 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

FOOD PRODUCTS ISO

ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

FOOD TECHNOLOGY ISO


FUEL OIL ISO ISO 10307-1 2009 Petroleum products - Total sediment in residual fuel oils - P. 1:

Determination by hot filtration /By International Organization for Standardization (ISO). 2nd ed. Geneva:

ISO, 2009.

ISO 10307-2 2009 Petroleum products - Total sediment in residual fuel oils - P. 2: Determination using standard procedures for ageing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

FUELS ISO

ISO 8216-1 2010 Petroleum products - Fuels (class F) classification - P. 1: Categories of marine fuels /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.


ISO 8217 2010 Petroleum products - Fuels (class F) - Specifications of marine fuels /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.

FURNITURE BSI

BS EN 12520 2010 Furniture - Strength, durability and safety - Requirements for domestic seating /By British Standards Institution (BSI). London: BSI, 2010.

GAS CYLINDERS ISO

ISO 9809-1 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - P. 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 9809-2 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - P. 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to

1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.



GAS PERMEABILITY

ISO

ISO 2782 2006 Rubber, vulcanized or thermoplastec - Determination of permeability to gases /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.

GLASS BSI BS 2975-2 2008 Sampling and analysis of glass-making sands - P. 2: Methods for chemical

analysis /By British Standards Institution (BSI). London: BSI, 2008.


GYPSUM PLASTER BSI

BS EN 520 2004 Gypsum plasterboards - Definitions, requirements and test methods /By British Standards Institution (BSI). London: BSI, 2010.

HARDNESS MEASUREMENT ISO

ISO 48 2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2010.

HEAT PUMPS ISO


IDENTIFICATION METHODS ISO

ISO 2076 2010 Textiles - Man-made fibres - Generic names /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2010.

ISO/IEC 18000-1 2008 Information technology - Radio frequency identification for item management - P. 1: Reference architecture and definition of parameters to be standardized /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

ISO/IEC 18000-2 2009 Information technology - Radio frequency identification for item

management - P. 2: Parameters for air interface communications below 135 kHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.


ISO/IEC 18000-3 2008 Information technology - Radio frequency identification for item management - P. 3: Parameters for air interface communications at 13,56 MHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


management - P. 4: Parameters for air interface communications at 2,45 GHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

ISO/IEC 18000-7 2009 Information technology - Radio frequency identification for item management - P. 7: Parameters for active air interface communications at 433 MHz /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

IDENTITY CARDS ISO

ISO/IEC 10373-7 2008 Identification cards - Test methods - P. 7: Vicinity cards /By


ISO/IEC 7816-2 2007 Identification cards - Integrated circuit cards - P. 2: Cards with contacts

- Dimensions and location of the contacts /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

IMPLANTS (SURGICAL) ISO ISO 13958 2009 Concentrates for haemodialysis and related therapies /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009. ISO 13959 2009 Water for haemodialysis and related therapies /By International Organization

for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

INFORMATION EXCHANGE ISO

ISO 7372 2005 Trade data interchange - Trade data elements directory /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.


ISO/IEC TR 15504-7 2008 Information technology - Process assessment - P. 7: Assessment of organizational maturity /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

INFORMATION TECHNOLOGY ISO

ISO/IEC 15417 2007 Information technology - Automatic identification and data capture techniques - Code 128 bar code symbology specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO/IEC 18000-1 2008 Information technology - Radio frequency identification for item management - P. 1: Reference architecture and definition of parameters to be standardized /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008. ISO/IEC 18000-2 2009 Information technology - Radio frequency identification for item

management - P. 2: Parameters for air interface communications below 135 kHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.


management - P. 3: Parameters for air interface communications at 13,56 MHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

ISO/IEC 18000-4 2008 Information technology - Radio frequency identification for item management - P. 4: Parameters for air interface communications at 2,45 GHz /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008. ISO/IEC 18000-7 2009 Information technology - Radio frequency identification for item

management - P. 7: Parameters for active air interface communications at 433 MHz /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

ISO/IEC 19794-1 2006 Information technology - Biometric data interchange formats - P. 1:

Framework /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO/IEC 19794-10 2007 Information technology - Biometric data interchange formats - P. 10:

Hand geometry silhouette data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO/IEC 19794-7 2007 Information technology - Biometric data interchange formats - P. 7: Signature/sign time series data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.


ISO/IEC 19794-8 2006 Information technology - Biometric data interchange formats - P. 8: Finger pattern skeletal data /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO/IEC 19794-9 2007 Information technology - Biometric data interchange formats - P. 9: Vascular image data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO/IEC TR 15504-7 2008 Information technology - Process assessment - P. 7: Assessment of organizational maturity /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO/IEC TR 20000-3 2009 Information technology - Service management - P. 3: Guidance

on scope definition and applicability of ISO/IEC 20000-1 /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

INTERNAL COMBUSTION ENGINES ISO

ISO 4081 2010 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.

LABELS BSI

BS EN 980 2008 Symbols for use in the labelling of medical devices /By British Standards

Institution (BSI). London: BSI, 2008.

LABORATORY EQUIPMENT ISO

ISO 648 2008 Laboratory glassware - Single-volume pipettes /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

LABORATORY GLASSWARE ISO

ISO 648 2008 Laboratory glassware - Single-volume pipettes /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


LATICES ISO

ISO 2004 2010 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2010.

LIQUEFIED PETROLEUM GAS ISO ISO 8789 2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor

vehicles - Specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

LIQUID AMMONIA ISO ISO 5771 2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia -


LIQUID FUELS ISO ISO 4264 2007 Petroleum products - Calculation of cetane index of middle-distillate fuels by


MAN-MADE FIBRES ISO ISO 2076 2010 Textiles - Man-made fibres - Generic names /By International Organization for

Standardization (ISO). 5th ed. Geneva: ISO, 2010.

MANAGEMENT TECHNIQUES ISO ISO/IEC TR 20000-3 2009 Information technology - Service management - P. 3: Guidance on

scope definition and applicability of ISO/IEC 20000-1 /By International Organization for Standardization (ISO). Geneva: ISO, 2009.


MEASURING INSTRUMENTS

ISO

ISO 10360-2 2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - P. CMMs used for measuring linear dimensions /By

International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

MEAT

ISO

ISO 13720 2010 Meat and meat products - Enumeration of presumptive pseudomonas spp. /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

MEAT PRODUCTS

ISO

ISO 13720 2010 Meat and meat products - Enumeration of presumptive pseudomonas spp. /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

MECHANICAL SHOCK

ISO ISO 8568 2007 Mechanical shock - Testing machines - Characteristics and performance /By


MEDICAL EQUIPMENT

BSI BS EN 980 2008 Symbols for use in the labelling of medical devices /By British Standards

Institution (BSI). London: BSI, 2008.

ISO ISO 10993-10 2010 Biological evaluation of medical devices - P. 10: Tests for irritation and skin

sensitization /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.


MICROBIOLOGICAL ANALYSIS

ISO

ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the

preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

MILK

ISO ISO 10932 2010 Milk and milk products - Determination of the minimal inhibitory concentration

(MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB) /By

International Organization for Standardization (ISO). Geneva: ISO, 2010. ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples,

initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

MILK PRODUCTS

ISO ISO 10932 2010 Milk and milk products - Determination of the minimal inhibitory concentration

(MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB) /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

ISO 29981 2010 Milk products - Enumeration of presumptive bifidobacteria - Colony count technique at 37 C /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.


MOTOR VEHICLES

ISO

ISO 8789 2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO,

2009.

NANOTECHNOLOGIES

ISO

ISO/TS 27687 2008 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

NATURAL RUBBER ISO

ISO 1658 2009 Natural rubber (NR) - Evaluation procedure /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

ISO 2004 2010 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications /By International Organization for Standardization (ISO). 5th ed.

Geneva: ISO, 2010.

ISO 2930 2009 Rubber, raw natural - Determination of plasticity retention index (PRI) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2009.

OPEN CHANNEL FLOW

ISO

ISO 4360 2008 Hydrometry - Open channel flow measurement using triangular profile weirs /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.


PACKAGING ISO ISO 23667 2007 Packaging - Transport packaging for dangerous goods - Rigid plastics and

plastics composite IBCs - Compatibility testing /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

PAINTS ISO ISO 8501-4 2006 Preparation of steel substrates before application of paints and related

products - Visual assessment of surface cleanliness - P. 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting /By International Organization for


PAPER ISO ISO 11476 2010 Paper and board - Determination of CIE whiteness, C/2º (indoor

illumination conditions) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 2470-1 2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - P. 1: Indoor daylight conditions (ISO brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 2470-2 2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor -

P. 2: Outdoor daylight conditions (D65 brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 5631-1 2009 Paper and board - Determination of colour by diffuse reflectance - P. 1: Indoor daylight conditions (C/2 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 5631-2 2008 Paper and board - Determination of colour by diffuse reflectance - P. 2: Outdoor daylight conditions (D65/10 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.


PAPER PULPS ISO

ISO 2470-1 2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - P. 1: Indoor daylight conditions (ISO brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.


PARTICLE BOARDS BSI

BS EN 634-2 2007 Cement-bonded particleboards - Specifications - P. 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions /By British Standards Institution (BSI). London; BSI, 2007.

PERFORMANCE TESTING BSI


PETROLEUM PRODUCTS ISO ISO 4264 2007 Petroleum products - Calculation of cetane index of middle-distillate fuels by


ISO 8216-1 2010 Petroleum products - Fuels (class F) classification - P. 1: Categories of marine

fuels /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010. ISO 8217 2010 Petroleum products - Fuels (class F) - Specifications of marine fuels /By

International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.


ISO 10307-1 2009 Petroleum products - Total sediment in residual fuel oils - P. 1: Determination by hot filtration /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.


ISO 12156-1 2006 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating

rig (HFRR) - P. 1: Test method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 13739 2010 Petroleum products - Procedures for transfer of bunkers to vessels /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

PHYSICAL TESTING BSI BS EN 539-2 2006 Clay roofing tiles for discontinuous laying - Determination of physical

characteristics - P. 2: Test for frost resistance /By British Standards Institution (BSI). London: BSI, 2008.

PIPE COATINGS BSI

BS EN 10300 2005 Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating /By British Standards Institution (BSI). London: BSI, 2005.

PIPETTES ISO ISO 648 2008 Laboratory glassware - Single-volume pipettes /By International Organization for


PLASTERBOARD BSI BS EN 520 2004 Gypsum plasterboards - Definitions, requirements and test methods /By

British Standards Institution (BSI). London: BSI, 2010.


PLASTICITY TESTING ISO

ISO 2930 2009 Rubber, raw natural - Determination of plasticity retention index (PRI) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2009.

PNEUMATIC EQUIPMENT ISO

ISO 7183 2007 Compressed-air dryers - Specifications and testing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

PROTECTIVE EQUIPMENT BSI

BS EN 137 2006 Respiratory protective devices - Self-contained open-circuit compressed air

breathing apparatus with full face mask - Requirements, testing, marking /By British Standards Institution (BSI). London: BSI, 2006.

QUALITY ASSURANCE SYSTEMS ISO


RADIOFREQUENCIES ISO

ISO/IEC 18000-1 2008 Information technology - Radio frequency identification for item management - P. 1: Reference architecture and definition of parameters to be standardized /By


ISO/IEC 18000-2 2009 Information technology - Radio frequency identification for item management - P. 2: Parameters for air interface communications below 135 kHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.


ISO/IEC 18000-3 2008 Information technology - Radio frequency identification for item management - P. 3: Parameters for air interface communications at 13,56 MHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


management - P. 4: Parameters for air interface communications at 2,45 GHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

ISO/IEC 18000-7 2009 Information technology - Radio frequency identification for item management - P. 7: Parameters for active air interface communications at 433 MHz /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

REFLECTANCE FACTOR ISO ISO 2470-1 2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor -

P. 1: Indoor daylight conditions (ISO brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.


REFRIGERATORS BSI BS EN 153 2006 Methods of measuring the energy consumption of electric mains operated

household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics /By British Standards Institution (BSI). London: BSI, 2006.

RESPIRATORY SYSTEM BSI BS EN 137 2006 Respiratory protective devices - Self-contained open-circuit compressed air



ROAD VEHICLES ISO ISO 8092-2 2005 Road vehicles - Connections for on-board electrical wiring harnesses - P. 2:

Definitions, test methods and general performance requirements /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.

ISO 9158 1988 Road vehicles - Nozzle spouts for unleaded gasoline /By International

Organization for Standardization (ISO). Geneva: ISO, 1988.

ROBOTS

ISO

ISO 10218-1 2006 Robots for industrial environments - Safety requirements - P. 1: Robot /By

International Organization for Standardization (ISO). Geneva: ISO, 2006.

ROOFING TILES

BSI

BS EN 539-2 2006 Clay roofing tiles for discontinuous laying - Determination of physical characteristics - P. 2: Test for frost resistance /By British Standards Institution (BSI). London: BSI, 2008.

RUBBER PRODUCTS

ISO

ISO 4642-1 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 1:

Semi-rigid hoses for fixed systems /By International Organization for Standardization (ISO). Geneva: ISO, 2009.



SAFETY MEASURES

ISO

ISO 10218-1 2006 Robots for industrial environments - Safety requirements - P. 1: Robot /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

SAMPLING METHODS

ISO

ISO 24153 2009 Random sampling and randomization procedures /By International Organization

for Standardization (ISO). Geneva: ISO, 2009.

SEASONINGS ISO

ISO 6571 2008 Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

SEATING BSI

BS EN 12520 2010 Furniture - Strength, durability and safety - Requirements for domestic seating /By British Standards Institution (BSI). London: BSI, 2010.

SEDIMENT ISO ISO 10307-1 2009 Petroleum products - Total sediment in residual fuel oils - P. 1:

Determination by hot filtration /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.



SOLID FUELS

BSI

BS EN 1860-1 2003 Appliances, solid fuels and firelighters for barbecueing - P. 1: Barbecues burning solid fuels - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2006.

BS EN 1860-3 2003 Appliances, solid fuels and firelighters for barbecueing - P. 3: Firelighters

for igniting solid fuels for use in barbecue appliances - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2006.

SPICES

ISO

ISO 6571 2008 Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

STATISTICAL METHODS OF ANALYSIS

ISO

ISO 24153 2009 Random sampling and randomization procedures /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

STEELS

ISO

ISO 8501-4 2006 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - P. 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting /By International Organization for Standardization (ISO). Geneva: ISO, 2006.


STEELS - SURFACE TREATMENT ISO ISO 8502-2 2005 Preparation of steel substrates before application of paints and related

products - Tests for the assessment of surface cleanliness - P. 2: Laboratory determination of chloride on cleaned surfaces /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

SURFACE TREATMENT ISO ISO 8501-4 2006 Preparation of steel substrates before application of paints and related

products - Visual assessment of surface cleanliness - P. 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting /By International Organization for


ISO 8502-2 2005 Preparation of steel substrates before application of paints and related

products - Tests for the assessment of surface cleanliness - P. 2: Laboratory determination of chloride on cleaned surfaces /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

SYMBOLS BSI

BS EN 980 2008 Symbols for use in the labelling of medical devices /By British Standards Institution (BSI). London: BSI, 2008.

ISO ISO/IEC 16390 2007 Information technology - Automatic identification and data capture

techniques - Interleaved 2 of 5 bar code symbology specification /By International Organization for


TERMINOLOGY ISO ISO/TS 27687 2008 Nanotechnologies - Terminology and definitions for nano-objects -

Nanoparticle, nanofibre and nanoplate /By International Organization for Standardization (ISO). Geneva: ISO, 2008.


TEST EQUIPMENT

ISO

ISO 8568 2007 Mechanical shock - Testing machines - Characteristics and performance /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

TESTING

BSI

BS EN 137 2006 Respiratory protective devices - Self-contained open-circuit compressed air


ISO


and testing - P. 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 9809-2 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - P. 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.



ISO 12156-1 2006 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - P. 1: Test method /By International Organization for Standardization (ISO). 2nd ed. Geneva:

ISO, 2006.

ISO/IEC 10373-7 2008 Identification cards - Test methods - P. 7: Vicinity cards /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


TESTING CONDITIONS ISO ISO 11476 2010 Paper and board - Determination of CIE whiteness, C/2º (indoor

illumination conditions) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010. ISO 13041-2 2008 Test conditions for numerically controlled turning machines and turning

centres - P. 2: Geometric tests for machines with a vertical workholding spindle /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 13041-3 2009 Test conditions for numerically controlled turning machines and turning centres - P. 3: Geometric tests for machines with inverted vertical workholding spindles /By International

Organization for Standardization (ISO). Geneva: ISO, 2009. ISO 13041-5 2006 Test conditions for numerically controlled turning machines and turning

centres - P. 5: Accuracy of feeds, speeds and interpolations /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

TEXTILE FIBRES ISO ISO 2076 2010 Textiles - Man-made fibres - Generic names /By International Organization for

Standardization (ISO). 5th ed. Geneva: ISO, 2010.

TEXTILES ISO

ISO 2062 2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

THERMOPLASTIC POLYMERS ISO ISO 5774 2006 Plastics hoses - Textile-reinforced types for compressed-air applications -



TURNING TOOLS ISO ISO 13041-2 2008 Test conditions for numerically controlled turning machines and turning

centres - P. 2: Geometric tests for machines with a vertical workholding spindle /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 13041-3 2009 Test conditions for numerically controlled turning machines and turning centres - P. 3: Geometric tests for machines with inverted vertical workholding spindles /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 13041-5 2006 Test conditions for numerically controlled turning machines and turning

centres - P. 5: Accuracy of feeds, speeds and interpolations /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

TYRES ISO

ISO 28580 2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

VEHICLE COMPONENTS ISO

ISO 28580 2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance

- Single point test and correlation of measurement results /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

VOLATILE MATTER DETERMINATION ISO

ISO 6179 2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.


VULCANIZED RUBBER

ISO

ISO 48 2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2010.

ISO 2782 2006 Rubber, vulcanized or thermoplastic - Determination of permeability to gases /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.

ISO 6179 2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) /By International

Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.

ISO 8013 2006 Rubber, vulcanized - Determination of creep in compression or shear /By


ISO 9026 2007 Raw rubber or unvulcanized compounds - Determination of green strength /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

WASHING MACHINES

ISO

ISO 6804 2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

WATER

ISO ISO 13959 2009 Water for haemodialysis and related therapies /By International Organization

for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

ISO 19250 2010 Water quality - Detection of Salmonella spp. /By International Organization for



WATER FLOW ISO ISO 4360 2008 Hydrometry - Open channel flow measurement using triangular profile weirs

/By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

WATER - QUALITY ISO ISO 19250 2010 Water quality - Detection of Salmonella spp. /By International Organization for


WEIRS ISO ISO 4360 2008 Hydrometry - Open channel flow measurement using triangular profile weirs

/By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

YARN ISO ISO 2062 2009 Textiles - Yarns from packages - Determination of single-end breaking force

and elongation at break using constant rate of extension (CRE) tester /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.


มาตรฐานไทย กรด มอก. 2495 2553 กรดไขมนละหงขจดนาสาหรบอตสาหกรรมเรซน

กรดไขมน มอก. 2495 2553 กรดไขมนละหงขจดนาสาหรบอตสาหกรรมเรซน

กระสอบ มอก. 729 2553 กระสอบพลาสตก

การซกรด มอก. 766 2552 สญลกษณการซกรดผลตภณฑสงทอ

การทาความสะอาด มอก. 766 2552 สญลกษณการซกรดผลตภณฑสงทอ

การรบกวนคลนวทย มอก. 1955 2551 บรภณฑสองสวางและบรภณฑทคลายกน: ขดจากดสญญาณรบกวนวทย

การรบกวนทางแมเหลกไฟฟา มอก. 1955 2551 บรภณฑสองสวางและบรภณฑทคลายกน: ขดจากดสญญาณรบกวนวทย

ความเขากนไดทางแมเหลกไฟฟา มอก. 1955 2551 บรภณฑสองสวางและบรภณฑทคลายกน: ขดจากดสญญาณรบกวนวทย

ความปลอดภย

มอก. 1548 2551 เครองสบนาไฟฟา เฉพาะดานความปลอดภย มอก. 1552 2551 เครองฆาแมลง เฉพาะดานความปลอดภย

คเตาเชอมโยง มอก. 2404 2551 คเตาตอเครองใชสาหรบใชในทอยอาศย และจดประสงคทวไปทคลายกน

เลม 1-2551 ขอกาหนด เลม 2-2551 คเตาเชอมโยงสาหรบบรภณฑในทอยอาศยและบรภณฑทคลายกน


เครองฆาแมลง

มอก. 1552 2551 เครองฆาแมลง เฉพาะดานความปลอดภย

เครองใชไฟฟาในบาน มอก. 1548 2551 เครองสบนาไฟฟา เฉพาะดานความปลอดภย

มอก. 1552 2551 เครองฆาแมลง เฉพาะดานความปลอดภย

มอก. 2461 2552 ตนาเยนบรโภค เฉพาะดานความปลอดภย

เครองสบนา มอก. 1548 2551 เครองสบนาไฟฟา เฉพาะดานความปลอดภย

เครองหมายและสญลกษณ มอก. 766 2552 สญลกษณการซกรดผลตภณฑสงทอ

มอก. 2448 2552 ตวยด - สลกเกลยว หมดเกลยว สลกเกลยวปลอยสองขางและแปนเกลยว - สญลกษณและการระบขนาด

ดาย มอก. 121 ล.6 2552 วธทดสอบสงทอ เลม 6 ขนาดเสนดาย

ดนขาว มอก. 1058 2553 ดนขาวสาหรบอตสาหกรรมส

ตวยด มอก. 2443 2552 ตวยด - การเคลอบสงกะสโดยกรรมวธจมรอน

มอก. 2444 2552 ตวยด - การทดสอบหาความเปราะเพราะโฮโดรเจนโดยการโหลดกอน - วธผวรองรบอยในแนวขนาน

มอก. 2445 2552 ตวยด - การทดสอบแรงบด/แรงบบ

มอก. 2446 2552 การทาผวปองกนสาหรบตวยดเหลกกลาไรสนม ทนทานตอการกดกรอน

มอก. 2447 2552 ตวยด - ระบบประกนคณภาพ



มอก. 2451 ล.7 2552 สมบตทางกลสาหรบตวยด เลม 7 การทดสอบการบดและแรงบดตาสดสาหรบสลกเกลยวและหมดเกลยวทมขนาดเสนผานศนยกลางระบ 1 มลลเมตร ถง 10 มลลเมตร

มอก. 2453 สมบตทางกลสาหรบตวยดเหลกกลาไรสนมทนทานตอการกดกรอน เลม 1-2552 สลกเลยว หมดเกลยวและสลกเกลยวปลอยสองขาง

เลม 3-2552 หมดเกลยวยดหรอตวยดอนทคลายคลงกนทไมรบความเคนดง เลม 4-2552หมดเกลยวปลอย

มอก. 2457 ตวยด - รอยความไมตอเนองทผว เลม 1-2552 สลกเกลยว หมดเกลยวและสลกปลอยสองขางสาหรบใชงานทวไป เลม 3-2552 สลกเกลยว หมดเกลยวและสลกเกลยวปลอยสองขางสาหรบใชงานพเศษ

ตนาเยน

มอก. 2461 2552 ตนาเยนบรโภค เฉพาะดานความปลอดภย

นามนพช

มอก. 741 2553 นามนละหงสาหรบอตสาหกรรมเรซน มอก. 2494 2553 นามนละหงขจดนาสาหรบอตสาหกรรมเรซน

นามนละหง

มอก. 741 2553 นามนละหงสาหรบอตสาหกรรมเรซน มอก. 2494 2553 นามนละหงขจดนาสาหรบอตสาหกรรมเรซน

บรรจภณฑ

มอก. 729 2553 กระสอบพลาสตก

แปนเกลยว



ผารม

มอก. 529 2552 ผารม

เรซน - วตถดบ

มอก. 2494 2553 นามนละหงขจดนาสาหรบอตสาหกรรมเรซน มอก. 2495 2553 กรดไขมนละหงขจดนาสาหรบอตสาหกรรมเรซน

วสดและอปกรณกอสราง

มอก. 1514 2553 สารอดรองไม

วสดและอปกรณไฟฟา

มอก. 955 สายไฟฟาหมฉนวนยาง แรงดนไฟฟาทกาหนดไมเกน 450/750 โวลต

เลม 1-2551 ขอกาหนดทวไป เลม 3-2551 สายไฟฟาทนความรอนหมฉนวนยางซลโคน เลม 4-2551 สายออน และสายไฟฟาออน

มอก. 2404 คเตาตอเครองใชสาหรบใชในทอยอาศย และจดประสงคทวไปทคลายกน

เลม 1-2551 ขอกาหนดทวไป เลม 2-2551 คเตาเชอมโยงสาหรบบรภณฑในทอยอาศยและบรภณฑทคลายกน

วารนช - นามน มอก. 741 2553 นามนละหงสาหรบอตสาหกรรมเรซน

วธทดสอบ

มอก. 121 ล.6 2552 วธทดสอบสงทอ

เลม 6-2552 ขนาดเสนดาย เลม 9-2552 แรงดงสงสดและการยดของผาทแรงดงสงสด โดยวธดงเตมหนากวางของชน

ทดสอบ เลม 26-2552 สวนผสมของเสนใย 2 ชนด



สลกเกลยว มอก. 2449 2552 สลกเกลยวและหมดเกลยวใชงานทวไป - อนกรมเมตรก - รศมใตหวเกลยว

มอก. 2450 2552 สลกเกลยวหมดเกลยวและสลกเกลยวปลอยสองขาง - ความยาวระบและความยาวเกลยวสาหรบสลกเกลยวใชงานทวไป


มอก. 2453 ล.1 2552 สมบตทางกลสาหรบตวยดเหลกกลาไรสนมทนทานตอการกดกรอน - เลม1 สลกเลยว หมดเกลยวและสลกเกลยวปลอยสองขาง

มอก. 2454 2552 สลกเกลยวหวหกเหลยมแบบมหนาแปลน - อนกรมขนาดเลก

มอก. 2456 2552 สลกเกลยวยดชนดมรองผาแบบปลายเรยบ


สายไฟฟา มอก. 955 สายไฟฟาหมฉนวนยาง แรงดนไฟฟาทกาหนดไมเกน 450/750 โวลต

เลม 1-2551 ขอกาหนดทวไป เลม 3-2551 สายไฟฟาทนความรอนหมฉนวนยางซลโคน

เลม 4-2551 สายออน และสายไฟฟาออน

สารอดรองไม มอก. 1514 2553 สารอดรองไม

สงทอ มอก. 121 วธทดสอบสงทอ

เลม 6-2552 ขนาดเสนดาย เลม 9-2552 แรงดงสงสดและการยดของผาทแรงดงสงสด โดยวธดงเตมหนากวางของชน

ทดสอบ

เลม 26-2552 สวนผสมของเสนใย 2 ชนด


ส มอก. 1406 2553 สเคลอบดานแอลคด

ส - ตวเตม มอก. 1058 2553 ดนขาวสาหรบอตสาหกรรมส

ส - นามน มอก. 741 2553 นามนละหงสาหรบอตสาหกรรมเรซน

สเคลอบ มอก. 1406 2553 สเคลอบดานแอลคด

หมดเกลยว มอก. 2448 2552 ตวยด - สลกเกลยว หมดเกลยว สลกเกลยวปลอยสองขางและแปนเกลยว -

สญลกษณและการระบขนาด มอก. 2449 2552 สลกเกลยวและหมดเกลยวใชงานทวไป - อนกรมเมตรก - รศมใตหวเกลยว

มอก. 2450 2552 สลกเกลยวหมดเกลยวและสลกเกลยวปลอยสองขาง - ความยาวระบและความยาวเกลยวสาหรบสลกเกลยวใชงานทวไป


มอก. 2452 2552 หมดเกลยวพรอมกานไมมหวเกลยวชนดมรองผา มอก. 2453 สมบตทางกลสาหรบตวยดเหลกกลาไรสนมทนทานตอการกดกรอน

เลม1-2552 สลกเลยว หมดเกลยวและสลกเกลยวปลอยสองขาง เลม 3-2552 หมดเกลยวยดหรอตวยดอนทคลายคลงกนทไมรบความเคนดง

เลม 4-2552 หมดเกลยวปลอย

มอก. 2455 2552 หลมสแฉกสาหรบหมดเกลยว


มอก. 2458 2552 หมดเกลยวหวกะทะกบหลมสแฉกชนด H หรอชนด Z - ผลตภณฑขน A


มอก. 2459 ล.1 2552 หมดเกลยวหวจมแบน (หวแบบทวไป) กบหลมสแฉก ชนด H หรอชนด Z - ผลตภณฑขน A เลม 1 เหลกกลาชนสมบต 4.8

อปกรณสองสวาง มอก. 1955 2551 บรภณฑสองสวางและบรภณฑทคลายกน: ขดจากดสญญาณรบกวนวทย

เอทานอล มอก. 640 2553 เอทานอล

เลม.1 2553 เอทานอลใชทางเภสชกรรม เลม.2 2553 เอทานอลใชทางอตสาหกรรม เลม.3 2553 เอทานอลใชเปนเชอเพลง


Alphabetical Subject Index Subject Page Acceptance specification 1

Acoustics 1

Agricultural products 1

Air 2

Air-conditioning equipment 2

Air filters - Classification systems 2

Air filters - Performance testing 2

Air filters - Testing conditions 2

Anchors 3

Animal feed 3

Bar codes 3

Biological analysis and testing 3

Board (paper) 4

Breaking load 4

Cements 4

Cereal products 5

Cereals 5

Cetane number 5

Chemical analysis and testing 5

Chemistry - Analysis 6

Coated fabrics 6

Colour 6

Compressed-air systems 6

Cooling systems 6

Creep testing 7

Dangerous materials 7


Subject Page Data layout 7

Data processing 7

Dental prosthesis 8

Dentistry 8

Design 8

Diesel fuels 9

Dimensional tolerances 9

Dishwashing machines 9

Electric cables 9

Elongation 10

Equipment safety 10

Essential oils 10

Filtration 10

Fire hoses 10

Fire resistance 11

Firefighting equipment 11

Flexible pipes 11

Flow measurement 12

Food - Analysis 12

Food control 13

Food products 13

Food technology 13

Fuel oil 13

Fuels 13

Furniture 14

Gas cylinders 14

Gas permeability 14

Glass 14


Subject Page Gypsum plaster 15

Hardness measurement 15

Heat pumps 15

Identification methods 15

Identity cards 16

Implants (surgical) 16

Information exchange 16

Information technology 17

Internal combustion engines 18

Labels 18

Laboratory equipment 18

Laboratory glassware 18

Latices 19

Liquefied petroleum gas 19

Liquid ammonia 19

Liquid fuels 19

Man-made fibres 19

Management techniques 19

Meat 20

Meat products 20

Mechanical shock 20

Medical equipment 20

Microbiological analysis 21

Milk 21

Milk products 21

Motor vehicles 22

Nanotechnologies 22

Natural rubber 22


Subject Page Packaging 23

Paints 23

Paper 23

Paper pulps 24

Particle boards 24

Performance testing 24

Petroleum products 24

Physical testing 25

Pipe coatings 25

Pipettes 25

Plasterboard 25

Plasticity testing 26

Pneumatic equipment 26

Protective equipment 26

Quality assurance systems 26

Radiofrequencies 26

Reflectance factor 27

Refrigerators 27

Respiratory system 27

Road vehicles 28

Robots 28

Roofing tiles 28

Rubber products 28

Safety measures 29

Sampling methods 29

Seasonings 29

Seating 29

Sediment 29


Subject Page Solid fuels 30

Spices 30

Statistical methods of analysis 30

Steels 30

Steels - Surface treatment 31

Surface treatment 31

Symbols 31

Terminology 31

Test equipment 32

Testing 32

Testing conditions 33

Textile fibres 33

Textiles 33

Thermoplastic polymers 33

Turning tools 34

Tyres 34

Vehicle components 34

Volatile matter determination 34

Vulcanized rubber 35

Washing machines 35

Water 35

Water flow 36

Water - Quality 36

Weirs 36

Yarn 36


ดรรชนหวเรอง หวเรอง หนา

กรด 37

กรดไขมน 37

กระสอบ 37

การซกรด 37

การทาความสะอาด 37

การรบกวนคลนวทย 37

การรบกวนทางแมเหลกไฟฟา 37

ความเขากนไดทางแมเหลกไฟฟา 37

ความปลอดภย 37

คเตาเชอมโยง 37

เครองฆาแมลง 38

เครองใชไฟฟาในบาน 38

เครองสบนา 38

เครองหมายและสญลกษณ 38

ดาย 38

ดนขาว 38

ตวยด 38

ตนาเยน 39

นามนพช 39

นามนละหง 39

บรรจภณฑ 39

แปนเกลยว 39

ผารม 40

เรซน - วตถดบ 40

วสดและอปกรณกอสราง 40

วสดและอปกรณไฟฟา 40


หวเรอง หนา วารนช - นามน 40

วธทดสอบ 40

สลกเกลยว 41

สายไฟฟา 41

สารอดรองไม 41

สงทอ 41

ส 42

ส - ตวเตม 42

ส - นามน 42

สเคลอบ 42

หมดเกลยว 42

อปกรณสองสวาง 43

เอทานอล 43

tisi library accession list acceptance...

Documents