yeomans series 6000 solids-handling wastewater...
TRANSCRIPT
Series 6000 Solids-HandlingWastewater Pumps
Series 6150 - Horizontal Base MountedSeries 6250 - Vertical Open ShaftSeries 6260 - Vertical Pedestal Mounted
YEOMANS®
Yeomans highly engineered solids-handling pumpshave been providing over a century of superiorperformance to thousands of valuable usersworldwide.
Yeomans Quality Since 1898.....
• Capacities to 20,000 USGPM (4,542 m3/hr)
• Heads to 300 feet (91m)
• Temperatures to 150º F (66º C)
• Pressures to 150 PSIG (1034 kPa)
• Discharge Sizes from 4" (100mm) to 20" (508mm)
• Solids (sphere size) to 7" (178mm)
Performance Overview.....
• Cast Iron
• 3% Nickel Iron
• 28% High Chrome Iron
• Ductile Iron
• 316 Stainless Steel
• Duplex Stainless Steel (CD4MCu)
Common Materials of Construction.....
Available with many special materials of construction and options to meet yourspecific application requirements. Conservative mechanical designs utilizingoversized pump shafts with appropriately selected bearings assure long equipmentlife through low radial stress and reduced shaft deflection during difficult operatingconditions.
Edward and Charles Yeomans began operation on the near north side of Chicago in 1898.The Yeomans Brothers Company specialized in the first vertical shaft bilge pump, and laterexpanded by adding a growing line of sewage pumps for the waste treatment, industrialwaste and process markets. Today, from our state-of-the art facilities at Aurora, Illinois,Yeomans Pump continues the traditions of quality, reliability and customer value that wereestablished at our founding.
Yeomans Series 6000 non-clog pumps are the ideal choice for pumping sewage, sludge,corrosives, caustics, light slurries, drainage, storm water and industrial by-products.Heavy-duty industrial quality, superior design features and a wide range of materials andoptions combine to provide the user with the ultimate in long service life and system reliability.
With every Yeomans Dry-Pit Solids-Handling pumpyou benefit from the following standard features.....
1- Rugged dust-proof pump bearing journal with double-row ball thrust bearing, ball or roller radial bearing,40,000 hour minimum L-10 bearing life at the most extreme operating points on the pump curve, minimum100,000 hours at the primary duty point. Frame is machined to assure positive, accurate shaft alignment andis provided with the necessary fittings for lubrication.
2- Enclosed multi-vane non-clog impeller passes 2-1/2" to 7" spherical solids, extremely smooth contours,devoid of sharp corners, prevents rags or stringy, fibrous material from catching or clogging. Highefficiency designs reduce horsepower requirements and lower electrical operating costs.
3- Contoured handhole inspection cover in casing.
4- Large diameter, high strength alloy steel shaft to providemaximum stiffness that prevents vibration and fatiguedue to unusual operating conditions.
5- Repelling back pump-out vanes to minimizeend-thrust, reduce pressure on the stuffing boxand prevent clogging.
6- Tapered shaft impeller engagement for positivealignment and ease of removal at the impeller hub.Includes keyway with key, stainless steel washerand locknut.
7- Hardened stainless steel shaft sleeve toprotect the machined and polished alloy steelshaft. Stainless steel shaft material is optional.
8- Micrometer axial shaft adjustment for easyadjustment to maintain clearance and reducewear due to recirculation betweenthe impeller eye and suction plate.
9- Packed stuffing box standard; doublemechanical seal optional.
10- Hardened stainless steel wearrings optional for both thesuction cover and impeller.
11- Suction and backplate areseparate components;complete rotating assembly can easilybe removed without disturbing the pumpsuction or discharge piping.
12 - Rugged, thick-walled reversible ("flip-over") casings provide for clockwise or counter-clockwise rotationusing CW or CCW impeller. Discharge nozzle may be positioned on 45º increments.
1
3
4
5 6
7
8
9
10
2
11
12
1
2
3 4
5
67
89
11
12
15
16
10
1314
CUBIC METERS PER HOUR20 30 40 50 100 200 300 500 1000
U.S. GALLONS PER MINUTE
TOTALHEADINFEET
TOTALHEADINMETERS
400
300
200
100
5040
30
20
10
5
5040
30
20
10
5
2
3
4
100
50 100 200 300 500 1000 2000 3000 6000
1 - 4207-1Y2 - 4307-1Y3 - 4310CSC-3C/1C4 - 4310CLC-3C/1C5 - 4310LC-3C/1C6 - 4312C-3D/3C
7 - 4312-3D/3C8 - 4315SC-4A9 - 4315LC-4BHT/4A10 - 4317-4BHT11 - 6312-3D12 - 6315-4BHT/4A
13 - 6415-4BHT/4A14 - 6317/8317LC-4BHT15 - 6317/8317SC-4BHT16 - 8415-4BHT/4A
1750 RPM
RANGE CHARTS
Hydraulic Performance.....
1 - 4207-1Y2 - 4307-1Y3 - 4310CSC-1C4 - 4310CLC-1C5 - 4310LC-1C6 - 4312C-3C7 - 4312-3C8 - 4315SC-3D
9 - 4315LC-3D10 - 4317-4A/3D11 - 6312-3C12 - 6315-3D13 - 6415-4A/3D14 - 6317/8317LC-4A15 - 6317/8317SC-4A16 - 8415-4A/3D
17 - 8515-4A18 - 8417-4A19 - 8518-4B/4A20 - 10522-6/521 - 12515-4A22 - 12622-614518-4BHT
CUBIC METERS PER HOUR20 30 40 50 100 200 300 500 1000
U.S. GALLONS PER MINUTE
TOTALHEADINFEET
TOTALHEADINMETERS
400300
200
100
5040
30
20
10
5
5040
30
20
10
5
2
3
4
100
50 100 200 300 500 1000 2000 3000 6000 10000
1160 RPM
1
2
3 4
5
67
9
11
15
16
10
13
14
17
1819
20
21
22
23
8
12
1 - 4310LC-1C2 - 4312C-3C3 - 4315SC-3D4- 4317-3D5 - 6312-3C6 - 6315-3D7 - 6415-3D
8 - 6317/8317LC-3D9 - 6317/8317SC-3D10 - 8415-3D11 - 8515-3D12 - 8417-4A13 - 8518-4A14 - 10522-5/4B
15 - 12515-4A16 - 12622-517 - 12624-618 - 14518-4B19 - 14620/16620-520 - 16622-6B
CUBIC METERS PER HOUR20 30 40 50 100 200 300 500 1000 2000
U.S. GALLONS PER MINUTE
TOTALHEADINFEET
TOTALHEADINMETERS
400300
200
100
504030
20
10
5
504030
20
10
5
2
34
100
50 100 200 300 500 1000 2000 3000 6000 10000
875 RPM
1
2
3
4
5
679
11
15
16
10
1314
17
18
19 20
812
Yeomans Pump offers anypump application a wide rangeof efficient hydraulic performancechoices to solve your pumpingneeds. Our time tested equipmentdesigns have served the wastewaterpumping industry for over 100 years.
1
2
4
5
6
7
9
11
15
16
10
1314
812
3
1 - 6415-3D2 - 6317/8317SC-3D3 - 8515-3D4 - 8417-3D5 - 8518-4A6 - 10522-4B
7 - 12515-4A8 - 12622-4B9 - 12624-510 - 14518-4B11 - 14620/16620-4B12 - 16622-5B
13 - 16624/18624-6B14 - 18622-5B15 - 18530-6BHT/6B16 - 20724-6B
CUBIC METERS PER HOUR50 100 200 300 500 1000 2000
U.S. GALLONS PER MINUTE
TOTALHEADINFEET
TOTALHEADINMETERS
200
100
5040
30
20
10
5
5040
30
20
10
5
2
3
4
200 300 500 1000 2000 3000 10000
705 RPM
4
1 - 10522-4B2 - 12622-4B3 - 12624-4B4 - 14620/16620-4B5 - 16622-5B
6 - 16624/18624-5B7 - 18622-5B8 - 18530-6B9 - 20724-6B
CUBIC METERS PER HOUR200 300 500 1000 2000
U.S. GALLONS PER MINUTE
TOTALHEADINFEET
200
100
50
40
30
20
10
5
TOTALHEADINMETERS
50
40
30
20
10
5
2
3
4
500 1000 2000 3000 10000
585 RPM
1 - 18530-6B2 - 20724-6B
CUBIC METERS PER HOUR300 500 1000 2000 3000
U.S. GALLONS PER MINUTE
TOTALHEADINFEET
100
50
40
30
20
TOTALHEADINMETERS
30
20
10
5
4
2000 3000 5000 10000 20000
495 RPM
1
2
Please contact us for capacitiesand heads outside of thesestandard range curves.
Alternate pump selections andcustom systems are available.Let us help you with yourpump system requirements !
Durability in design and long-termperformance are just two of themajor benefits that you areassured when buying YeomansSeries 6000 pumps.
1 2
3
8
5
6
7
9
Mounting Configurations.....
Series 6150 - Horizontal Base Mounted
Series 6260 - VerticalPedestal Mounted
Series 6250 - Vertical Open ShaftCustom mounting arrangementsare also available.
Please contact us to discuss yourspecific requirements !
Controls and Accessories.....
Local Starter/Control Panels
Belt-Drive Systems
Fully integrated VFD Systems
Electric Motors,Couplings and Supports
YEOMANS PUMP3905 Enterprise CourtP.O. Box 6620Aurora, IL 60598-0620PH: 630-236-5500FX: 630-236-5511URL: www.yeomanspump.com
ISO 9001:2000 Certified
Bulletin 6000 - Issue July 2002
A few of the other YEOMANS Pump products.....
YEOMANS®
Submersible Solids-HandlingPumps
®
Self-CooledDry-Pit SubmersibleSolids-Handling Pumps
Suspended Wet-PitPumps for IndustrialWastewater
SHONE PneumaticEjector Systems forlow flows containingsolids, grease, scum &other domestic wastes
®
SUPER DRAIN-DRIFree StandingSump Pumps
®