workover optimization & horizontal well intervention 2014
DESCRIPTION
With unconventional wells typically depleting 65-85% in the first year and another 20% in the subsequent years, there is a growing impetus to optimize and innovate workover and well intervention operations to improve the life of existing wells and restore production to maximize the recovery of costly unconventional wells. Innovations in coiled tubing, conveyance, eline and logging tools and the introduction of techniques for re-completions may ensure that depleting wells can be recovered and production maximized but such operations are not without significant cost implications and technical challenges. Unpredictable complications throughout production including damaged casing, blocked perforations and broken and lost equipment downhole incur great risk, come at a high cost to repair and can, of course, result in complete failure of the well. Additionally, the economic viability of re-completions operations is still relatively unknown and the technical challenges of re-fracturing are complex. Operators therefore need to carefully consider the economic gamble in repairing a depleting well or potential in-fill drilling operations against the cost of drilling a new well. A balance must be struck between optimizing the cost and speed of workovers and remedial well intervention, while increasing the long-term effectiveness and safety of operations to reduce the economic risk of repairing wellbores and adequately extend the production time between workovers. The Workover Optimization & Horizontal Well Intervention 2014 is the only E&P led forum to provide technical talks and case study based strategies on effective optimization and cost reduction of both workovers and remedial well interventions. Senior E&P presenters will examine techniques for optimizing plug drillouts, cleanouts, coiled tubing interventions, casing repairs and fishing and evaluate how to enable re-completions in depleting wells. The content of the detailed two-day agenda has been created entirely by workover and intervention professional across American unconventional oil and gas operators.TRANSCRIPT
The First & Only Horizontal Specific Congress Dedicated To Well Intervention, Workover, Completions & Operations Professionals
Examining Techniques For Optimizing The Cost Of Workovers And Remedial Well Interventions And Assessing How To Economically Re-Stimulate Horizontal WellsAfter The Initial Production Decline
Horizontal Well Intervention & Re-Stimulation Topics Being Discussed:
April 23-24, 2014 | Houston | Texas
Chad Touchett VP Completions & Production Bluescape Resources
Hear From Over 20 Leading E&Ps Including:
M Follow us @UnconventOilGas
w w w. w o r k o v e r- o p t i m i z a t i o n - 2 0 1 4 . c o m
Register By FridayFebruary 21, 2014
SAVE $400
• DRILLOUTS: Examining speed, availability and reach of stick pipe vs. coiled tubing
drillouts to identify which method is most cost-effective
• MILLING OPTIMIZATION: Comparing methods for selecting BHA and optimizing
milling operations to shorten drillout time and effectively clean the hole
• CORROSION MITIGATION: Examining chemical, mechanical and physical barriers
against corrosion development and how to target highly corrosive zones to cost-
effectively reduce pipe damage
• RE-COMPLETIONS: Strategies for recording and analyzing well conditions in depleting
wells to locate un-stimulated zones and select optimal wells for re-completions
• FLUID DIVERSION & ZONAL ISOLATION: How to reduce formation communication
between existing perforations and annulus to achieve a high enough pressure and
flow rate for re-completions
• CASING REPAIRS: The comparative benefits, cost and applications for cement
squeezes, patches and innovations in cementing to optimize remedial casing repairs
Omar Soto Senior Petroleum Engineer BP
Don Purvis Senior Technical Advisor Marathon Oil
Doug Hogan Senior Workover & Completions Specialist Fidelity Oil & Gas
Mike Cowan Senior Advisor - Cementing & Fluids Apache
Kass Copelin Senior Operations Engineer Rio Oil & Gas
John Rowell Completions & Well Intervention Supervisor Shell
Timothy Smith President Petro Lucrum
Organized By:
Register By FridayFebruary 21, 2014
SAVE $400
www.workover-optimization-2014.com (1) 800 721 3915 [email protected]
With unconventional wells typically depleting 65–85% in the first year and another 20% in the subsequent years, there is a growing impetus to optimize and innovate on workover and well intervention operations to improve the life of existing wells and restore production to maximize the recovery of costly unconventional wells.
Innovations in coiled tubing, conveyance, eline and logging tools and the introduction of techniques for re-completions may ensure that depleting wells can be recovered and production maximized, but such operations are not without significant cost implications and technical challenges. Unpredictable complications throughout production including damaged casing, blocked perforations and broken and lost equipment downhole incur great risk, come at a high cost to repair and can, of course, result in complete failure of the well. Additionally, the economic viability of re-completions operations is still relatively unknown and the technical challenges of re-fracturing are complex.
Operators therefore need to carefully consider the economic gamble in repairing a depleting well or potential in-fill drilling operations against the cost of drilling a new well. A balance must be struck between optimizing the cost and speed of workovers and remedial well intervention while increasing the long-term effectiveness and safety of operations to reduce the economic risk of repairing wellbores and adequately extend the production time between workovers.
The Workover Optimization & Horizontal Well Intervention 2014 is the only E&P led forum to provide technical talks and case study based strategies on effective optimization and cost-reduction of both workovers and remedial well interventions. Senior E&P presenters will examine techniques for optimizing plug drillouts, cleanouts, coiled tubing interventions, casing repairs and fishing, and evaluate how to enable re-completions in depleting wells. The content of the detailed two-day agenda has been created entirely by workover and intervention professional across American unconventional oil & gas operators.
Over two days, production, intervention and completions industry experts will evaluate the most reliable new developments in well servicing tools and technology including coiled tubing strength, fiber optic cable, eline and conveyance tools, expandable casings, workover fluid and corrosion mitigation innovations, straddle packers and dissolvable frac plugs and evaluate the cost of stick pipe vs coiled tubing interventions to determine the most cost-effective investment in well interventions is achieved.
What Is Different About The Workover Optimization &
Horizontal Well Intervention Congress 2014?
• HORIZONTAL FOCUS: The only congress designed for the specific
challenges facing onshore, horizontal well
interventions and workovers to provide
targeted solutions for the technical
challenges that extended laterals present
• E&P-LED: This is not a congress led by suppliers or researchers. Over 20
experts from operating companies will be
speaking using technical case studies and
cost-reduction strategies to demonstrate
tried and tested methodologies for well
interventions
• REDUCING DOWNTIME FOCUS: The comprehensive two day agenda has
been entirely designed towards the end
goal of reducing down time and lowering
costs of workovers and well interventions
while increasing longevity of the wellbore
• RE-COMPLETIONS FOCUS: Presenters on day two will focus on discussing the
feasibility of re-completions in horizontal
wells to enable dramatic recovery
enhancement
• PRACTICAL SOLUTIONS: All presentations have been developed to
offer applicable, practical solutions to the
specific group of workover, completions,
production and operations professionals.
This is not a congress analyzing problems
– it is a congress delivering tried and tested
solutions
• LATEST TECHNOLOGIES: Operator case histories will demonstrate the
efficiency of the very latest technologies
being employed including innovative fiber
optic coil, eline, tractoring, and logging
technology to evaluate most efficient and
cost-effective methods for conveyance and
logging
Venue Information:
DoubleTree by Hilton Hotel Houston - Greenway Plaza6 E Greenway Plaza,Houston, Texas77046, USA
Tel: 1-713-629-1200
Web: http://goo.gl/OI35t6
Need to generate new sales leads, launch a new product, engage key decision makers, build new future business relationships in key markets, or simply educate the industry about a new product? Then you need to exhibit at the Workover Optimization & Horizontal Well Intervention 2014. Our busy exhibit area is an integral part of the congress and is of genuine practical value to delegates, who are looking for new solutions and technologies. Exhibiting at the congress will help you position yourself as a market leader and centre of excellence to the key decision makers in the industry.
For further information, please contact: [email protected] + (1) 800 721 3915
Sponsorship And Exhibition Opportunities Available At The Congress
PLUG DRILLOUTS, CLEANOUT AND CORROSION MITIGATIONDay one will examine optimization of drillouts and well cleanouts by analyzing BHA selection, stickpipe vs. coiled tubing drillouts,cleanout fluids and chemical treatment of scale, paraffin, hydrate and sand. Case studies will also specifically address mitigatingpipe and casing corrosion downhole and strategies for gas well deliquification
Day 1Wednesday April 23, 2014
8.30 Chair’s Opening Remarks
KEYNOTE: COILED TUBING VS. WORKOVER RIG
8.40 Examining The Decision Making Criteria Being Used For Selecting Coiled Tubing Units Vs. Workover Rigs: Risk Vs. Cost Vs. Add-Pay Potential
• Comparing the added days on location vs. the lower daily rate of workover rigs to determine whether stickpipe interventions are cost-effective
• Weighing the logistical challenges of attaining larger diameter coiled tubing and lateral limitations vs. quicker intervention times to determine cost saving potential with coiled tubing
• Hearing how an operator prioritizes and schedules the volume of well work with available rigs and tubing units to optimize resources
• Examining the severity of an intervention job and add-pay reserves potential of the well vs. the cost and production of a new well to determine if intervention is worthwhile
• Analyzing the supply and demand of workover rigs and coiled tubing units in specific plays to understand supplier cost considerations
Tim Smith, President, Petro Lucrum
9.10 Question & Answer Session
WORKOVER PROGRAM MANAGEMENTStrategies For Restructuring And Implementing A
Comprehensive Workover Program: Examples From A 1000 Well Field In The Permian Basin
CASE STUDY: WORKOVER PROGRAM IMPLEMENTATION
9.20 How An Operator Has Budgeted And Executed A Workover Program In The Permian To Restore Production On A 1000 Well Field, Improve Safety Procedures, And Decrease LOE
• Explaining methods for improving workover reporting, scheduling, budgeting and resource allocation to track costs, time lost, and inefficiencies
• Implementing restructured field procedures for pump changes and remedial interventions to drive down failure rates and increase productive time between workovers
• Re-organizing and executing a comprehensive safety program to increase wellsite safety and improve operational standards
• Selecting a budget and rig count based on BOE and failure rate to optimize costs and scheduling and use of rigs and equipment
Kellen Mcloughlin, Production Engineer, SandRidge Energy
9.50 Question & Answer Session
10.00 Morning Refreshments In Exhibition Showcase Area
DRILLOUT OPTIMIZATIONEvaluating Bha For Milling Operations And Discussing The Pros And Cons Of Stick Pipe Vs. Coiled Tubing Drillouts To
Improve Drillout Speed And Cost
PANEL: BHA FOR DRILLOUTS
10.30 Comparing Methods For Selecting BHA And Optimizing Milling Operations To Shorten Drillout Time And Effectively Clean The Hole
• Comparing BHA for milling operations to determine which selection optimally reduces torque and drag, removes various sized cuttings and is compatible with high temperatures and pressures:
• Motor• Bit• Agitator• Bi-directional jars• Circulating subs• Disconnects, backpressure valves
• Analyzing which circulating rate, torque and RMPs to run to avoid burning out the motor while optimizing drillout time
• Determining whether cast iron or composite bridge plugs used in completions can enable faster drillout times
Kevin Gressett, Consultant, Bluescape Resources
11.00 Question & Answer Session
DRILLOUTS: STICK PIPE VS. COILED TUBING
11.10 Examining Speed, Availability And Reach Of Stick Pipe Vs. Coiled Tubing Drillouts To Identify Which Method Is Most Cost-Effective
• Determining the severity of doglegs and bends downhole to evaluate the necessity of using stick pipe to reach lateral depth easier
• Examining the cost and availability of workover rigs for stick pipe vs. coiled tubing units to identify which is most accessible and cost-effective
• Analyzing the time it takes to employ stick pipe vs. coiled tubing and the projected well result and workover costs to identify the optimal equipment choice
• Evaluating the use of dissolvable ball plugs to determine whether the results, cost and time spent are feasible to standard drillout operations
Doug Hogan, Senior Workover & Completions Specialist, Fidelity Oil & Gas
11.40 Question & Answer Session
11.50 Lunch In Exhibition Showcase Area
OPTIMIZING CLEANOUTS ON LIVE WELLSSelecting Workover Fluid Systems For Cleaning Holes While
Maintaining Pressure And Well Control
WORKOVER FLUID SELECTION
12.50 How Operators Are Selecting Fluid Systems For Cleanouts And Remedial Interventions To Manage Under Pressured Wells And Prevent Getting Stuck Downhole
• Analyzing the composition, viscosity and temperature limitations of various fluids to evaluate the ideal fluids for cleanout:
• Water-based• Gel systems/gel pills• Oil-based• Foams
• Determining the optimal pumping rate, volume of fluids and proper use of seeps to achieve zero pressure and reach the toe of the well
• Evaluating the amount of pipe-on-pipe tubing lubricant and friction reducer required to manage drag and friction lines downhole
• Outlining the use of temporary blocking agents to improve lost circulation of fluids and block off frac stages and target specific zones
Andy Davidson, Completions & Wellsite Supervisor, Anadarko Petroleum
1.20 Question & Answer Session
CORROSION AND CHEMICAL TREATMENTStrategies For Creating Effective Barriers To Corrosion
Development And Examining Chemical Treatment Of Scale, Paraffin, Sand And Hydrate To Prevent Stuck Pipe
CORROSION MITIGATION
1.30 Examining Chemical, Mechanical And Physical Barriers Against Corrosion Development And How To Target Highly Corrosive Zones To Cost-Effectively Reduce Pipe Damage
• Hearing how operators are altering the metal chemistry of the pipe by adjusting chrome and carbon levels to effectively reduce corrosion prone content in the metal
• Discussing the durability and effectiveness of fitting physical barriers such as plastic coating or epoxy pipe to prevent corrosion
• Classifying the minimum amount of corrosion inhibitor chemicals required to prevent corrosion and reduce chemical costs
• Locating high corrosion producing zones and utilizing coiled tubing to pin-point corrosion prone zones and reduce overall treatment costs
• Knowing the gas/oil/water ratio and optimal velocity flow stream at which to pump to control friction on pipe and slow down corrosion development
• Examining the use of cathodic protection systems to effectively protect the casing and divert corrosion production
John Rowell, Completions & Well Intervention, Shell
2.00 Question & Answer Session
CHEMICAL TREATMENT
2.10 Optimizing Chemical Treatment Of Scale, Paraffin, Sand And Hydrate To Avoid Stuck Pipe And Optimize The Cost Of Spot Treatment Interventions
• Thoroughly examining the scale, paraffin, sand, corrosion and hydrate tendencies of the wellbore to determine optimal treatment requirements
• Analyzing the fluid capabilities and volume of H2S scavengers necessary to tackle the formation requirements
• Evaluating filtration options for produced water to adequately remove solids and debris before mixing with chemical treatments for workover fluid
• Examining chemical treatment options for blocking sand production while maintaining fluid production
• Determining the maximum temperature and pressure levels at which hydrate begins to forms to pinpoint the geo-thermal gradient at which hydrate cannot produce
• Evaluating methanol and kinetic inhibitors to prevent hydrate blockages in gas wells
David Gonzales, VP Operations, Logos Resources2.40 Question & Answer Session
2.50 Afternoon Refreshments In Exhibition Showcase Area
PIPE AND COILED TUBING INNOVATIONHearing Innovations In Coiled Tubing Design To Successfully
Reach Lateral Depth And Maximizing Pipe Strength And Fatigue Cycles To Extend Life Of Pipe And Tubing
COILED TUBING REACH
3.20 Evaluating Strategies For Extending The Reach Of Coiled Tubing To Reach Lateral Depth Without Surpassing The Strength Limits Of The Tubing
• Determining the optimal size of coil used for cleanouts to understand if larger sized coiled tubing can effectively reach longer depths given the additional weight in the lateral
• Evaluating the use of oscillating tools, friction reducer, and downhole beads to reduce torque and drag and enable coil to reach total depth
• Analyzing the successful use of tractoring tools to pull coiled tubing to depth without getting stuck
• Discussing innovations in flat-pack coiled tubing to withstand deeper lengths and optimize cleanouts and stimulation operations
3.50 Question & Answer Session
PIPE INNOVATIONS
4.00 Hearing How The Latest Pipe Innovations Are Reducing Fatigue Cycles On Pipes To Lengthen Lifecycle And Reduce Equipment And Workover Costs
• Examining the predictability of failure on coiled tubing to understand the current fatigue life expected on pipe and workstring
• Discussing the cost considerations and potential advantages of renting vs. owning workstring and pipe to save cost on treatment and ensure quality of materials
• Training and understanding proper handling, tightening techniques and tubing installation of materials to avoid wasted time and material cost caused by preventable dents and scrapes
• Hearing about innovations in pipe fatigue cycles and strength limitations on coiled tubing, production pipe and other downhole tubing materials
Lara Burgess, Completions Engineer, Talisman Energy4.30 Question & Answer Session
GAS WELL DELIQUIFICATIONStrategies For Unloading Liquid From Gas Wells To Restore
Production At Low Cost
GAS WELL DELIQUIFICATION
4.40 How An Operator Is Optimizing Gas Well Deliquification To Lift Liquids And Restore Gas Production
• Examining each fluid’s limitation to the hydrostatic pressure downhole to understand what composition and weight can effectively lift liquids
• Weighing the benefit of having onsite nitrogen generation to lift fluids vs. the potential corrosion caused by the resultant oxygen downhole
• Evaluating the use of pumps downhole to assist in unloading liquids on gas wells and prevent liquid loading
Omar Soto, Senior Petroleum Engineer, BP5.10 Question & Answer Session
5.20 Chair’s Closing Remarks
www.workover-optimization-2014.com (1) 800 721 3915 [email protected]
8.30 Chair’s Opening Remarks
RE-COMPLETIONSDiscussing Initial Completions Design To Enable Re-
Completions Interventions, Examining Zonal Isolation, Fluid Diversion And Adequate Well Conditions For Re-
Completions
PANEL: ENABLING RE-COMPLETION
8.40 Plug And Perf, Sliding Sleeve And Straddle Packers: Assessing Which Method Is Most Conducive To Re-Completions
• Examining the initial completions configuration to determine what the limitations are for re-completions
• Evaluating the effectiveness of a re-closeable sliding sleeve completion design to enable isolation of fracture stages and facilitate re-completion
• Hearing about the ability of straddle packers to effectively isolate zones and enable re-completions in a fractured, tight reservoir
• Examining whether you can use a set of packers and bridge plugs to isolate zones
• Assessing the applicability and cost of using coiled tubing for re-completions fracturing
Chad Touchet, VP Operations, Bluescape ResourcesDon Purvis, Senior Technical Advisor, Marathon OilKass Copelin, Senior Operations Engineer, Rio Oil & Gas9.10 Question & Answer Session
WELL CONDITIONS FOR RE-COMPLETION
9.20 Strategies For Recording And Analyzing Well Conditions In Depleting Wells To Locate Un-Stimulated Zones And Select Optimal Wells For Re-Completions
• Discussing evaluation tools and bond logs in fractured wells to understand the degree of wellbore damage and determine whether it is viable to re-complete
• Innovations in determining the rock mechanics of depleting wells to discern where remaining minimum and maximum stress zones are oriented and determine zones for re-completions
• Determining the optimal distance from existing intervals to re-complete to ensure the stimulation of new rock without further risking wellbore integrity
• Examining conveyance methods for logging tools in depleted horizontal wells to identify productive and non-productive intervals
Todd Wiley, Senior Operations Engineer, Legend Natural Gas9.50 Question & Answer Session
10.00 Morning Refreshments In Exhibition Showcase Area
FLUID DIVERSION AND ZONAL ISOLATION
10.30 Hearing How An Operator Is Reducing Formation Communication Between Existing Perforations And Annulus To Achieve A High Enough Pressure And Flow Rate For Re-Completion
• Discussing the effectiveness of diverting agent to adequately reach specific zones, seal off perforations and minimize pressure influx above a packer
• Quantifying the amount of diverting agent necessary to isolate zones without causing casing damage
• Examining potential methods of shutting off the flow to the annulus side to maintain well pressure required for re-completion operationTrialing the use of temporary plugging techniques such as bio balls to block existing perforations
11.00 Question & Answer Session
REMEDIAL ACIDIZING AND JETWASHING TREATMENTS
Examining Methodologies And Innovations In Acidizing And
Jet Washing To Open Fractures Without Causing Damage
To The Well
REMEDIAL ACIDIZING AND JET WASHING
11.10 Examining Strategies For Targeting Acid And Jet
Washing Stimulation To Stimulate Fractures Without
Causing Casing And Perforation Damage
• Selecting acid treatment to eliminate tortuosity and re-condition the wellbore
• Evaluating the rock type and well temperature, pressure and condition to determine whether acid treatment or jet washing would be most effective
• Determining the optimal rate and speed at which to pump acid to reach the formation without damaging wellbore and creating emulsion or acid reactions
• Examining the use of gelled acid systems and cross-link polymer chains to raise viscosity and delay the flow of acid to control etching in the zone
• Examining the use of jet-washing to effectively remove scale blockages and restore production without damaging the formation
11.40 Question & Answer Session
11.50 Lunch In Exhibition Showcase Area
CEMENTING REPAIRS
Discussing Innovations In Cementing To Block-Off
Depleted Stages And Case New Zones For Re-Completion,
And Optimizing Casing Repairs In Remedial Interventions
CASING REPAIRS
12.50 Hearing The Comparative Benefits, Cost And
Applications For Cement Squeezes, Patches And
Innovations In Cementing To Optimize Remedial Casing
Repairs
• How operators are effectively circulating cement from
bottom to surface in low frac gradients and high pressures
to avoid formation damage and lost cement downhole• Discussing the development of low density cement that can
be pumped easier throughout the well while retaining the same degree of strength
• Evaluating the use of seal tight to repair minor leaks and
tears and save on costly workovers
• Determining the exact size and location of casing damage
downhole to pin point the cement for squeeze jobs and
adequately plug the hole
• Understanding the differential pressure limitations, hole
size, and pipe ID that are conducive to the use of cement
patches to select the optimal method for specific repairs
Mike Cowan, Senior Advisor - Cementing & Fluids, Apache
1.20 Question & Answer Session
FISHING AND CONVEYANCE TOOLSCase Study On A Successful Extended Lateral Fishing Operation And Examining Innovations In Electric And Fiber Optic Conveyance Tools To Optimize Remedial
Interventions
CASE STUDY: FISHING
1.30 Examining The Tools And Techniques That An Operator Has Employed To Fish Out Of An Extended Lateral Well At Low Cost• Examining the size threshold on specific tools to optimize
tool selection for recovering larger, deeper items and to minimize time and cost:
• Grapple• Overshot• Jars• Spears• ID/OD cutters/cut right
• Identifying options for lift and recovery of an item once it has been hooked to avoid reaching the fatigue limit on the fishing pipe
• Evaluating the usefulness of downhole cameras on eline to identify the size and dimensions of the item and determine if it is worth the time and investment
• Discussing the effectiveness of an impression block tool as a low cost alternative to downhoe cameras to adequately identify the shape and impression of the stuck item downhole
• Discussing how an operator has used make-shift tool modifications to successfully latch onto odd-shaped items
William Bedford, West Texas Operations Manager, Greenleaf Resources2.00 Question & Answer Session
ELINE AND FIBER OPTIC COIL
2.10 Highlighting The Applications And Durability Of Eline And Fiber Optic Coil Technologies For Logging And Tractoring To Determine Feasibility Of Use
• Identifying innovations in eline tractoring units to reach longer lateral depth without failure to understand current limitations
• Examining the durability and accuracy of readings taken with fiber optic coil to determine the practicality of investing in smart coil tubing
• Evaluating if reducing the total runs downhole with fiber optic coil outweighs the maintenance time required at surface to determine if it is cost-effective
• Discussing the potential of logging while tractoring tools for eline to reduce runs downhole
• Identifying telemetry issues with the use of fiber optic coil and eline tools to understand limitations for receiving signal from downhole
2.40 Question & Answer Session
2.50 Chair’s Closing Remarks
3.00 End Of Conference
Day 2Thursday April 24, 2014
RE-COMPLETIONS, CEMENTING AND REMEDIAL IN INTERVENTIONSDay two will evaluate the potential of re-completions in depleted wellbores by determining the add-pay potential and discussing completionsdesign to facilitate re-completions, and isolating new zones to effectively re-stimulate depleted wells. Day two will also discuss thelatest case studies on cementing repairs, fishing operations and current technologies for eline to refine remedial well interventions
www.workover-optimization-2014.com (1) 800 721 3915 [email protected]
Engage In Open DiscussionsExtended Networking OpportunitiesStrategic Insights And Interactive Discussion
I really enjoyed hearing about actual field experiences from my peers. Good to see cooperation among companies in the
petroleum industry
Whiting Petroleum
Address For Invoice Purposes
Zip/Postal Code
Country
Payment must be received in full prior to the event.
*Option 1. CREDIT CARD Please charge my * VISA * AMERICAN EXPRESS * MASTERCARD
Expiry date
Security Code / CVV (required)
Signature of card holder
Amount $
Card number
Name on card
I would like to register the delegate(s) below for the 2 day conferenceWorkover Optimization & Horizontal Well Intervention 2014
PYesDetails PLEASE USE CAPITALS - PHOTOCOPY FOR MULTIPLE DELEGATES
Delegate Rates GUESTS ARE RESPONSIBLE FOR THEIR OWN TRAVEL AND ACCOMMODATION ARRANGEMENTS
Payment PLEASE TICK APPROPRIATE BOXES AND COMPLETE DETAILS
How To Finalize Your Registration
*Option 2. INVOICE An invoice containing payment instructions will be sent electronically upon receipt of the completed registration form.
Delegate 1
* Mr * Dr * Miss * Ms * Mrs * Other:
Name
Position
Organization
Telephone
Delegate 2
* Mr * Dr * Miss * Ms * Mrs * Other:
Name
Position
Organization
Telephone
SAVE UP TO 20% ON GROUP REGISTRATIONS
So you can involve your whole team,
Call for rates: (1) 800 721 3915
All prices quoted above are inclusive of GST
Now that your details are completed please send your registration form to
our Customer Service Team using one of the following options:
Option 1. Email: [email protected]
Option 2. Fax: (1) 800 714 1359
Enquiries And More Information
Should you have any enquiries or if you would like to request more
information please contact our friendly Customer Service Team on
(1) 800 721 3915 or visit the conference website at
www.workover-optimization-2014.com
www.workover-optimization-2014.com (1) 800 721 3915 [email protected]
Super Early Booking Discount Early Booking Discount Standard Rate
Book And Pay By Friday February 21 Book And Pay By Friday March 7 From March 8
2 Day Conference Pass * $1399 SAVE $400 * $1599 SAVE $200 * $1799
Add Pre-Conference Workshop * $399
Terms & Conditions
The conference is being organized by American Business Conferences, a division of London Business Conferences Ltd, a limited liability company formed under English company law and registered in the UK no. 5090859.Cancellations received 30 days prior to the start of the event will be eligible for a refund less $150 administration fee, after this point no refund will be given. Cancellations must be made in writing, if you are unable to attend you may nominate a colleague to attend in your place at no additional cost.Receipt of this registration form, inclusive or exclusive of payment constitutes formal agreement to attend and acceptance of the terms and conditions stated.All outstanding fees must be paid within our standard payment period of 7 days. Any outstanding invoices will remain valid should cancellation of attendance be received outside of the aforementioned cancellation period.*If you are claiming the early booking discount this may not be used in conjunction with other discounts advertised elsewhere. All discount codes and offers must be claimed at
the time of registration.American Business Conferences reserves the right to alter or cancel the speakers or program.American Business Conferences reserve the right to refuse admission.We would like to keep you informed of other American Business Conferences products and services. This will be carried out in accordance with the Data Protection Act. Please write to the Head of Marketing, American Business Conferences at the address below if you specifically do not want to receive this information.American Business Conferences. City Center One. 800 Town & Country Blvd. Suite 300. Houston. Texas. 77024American Business Conferences will not accept liability for any individual transport delays and in such circumstances the normal cancellation restrictions apply.American Business Conferences is a Division of London Business Conferences Limited, Registered in England No. 5090859 EIN. no: 98-0514924