wollensak history - binoculars & opticstelscope/leech.2015.wollensak.pdf · 1 wollensak history...
TRANSCRIPT
1
WOLLENSAK HISTORY - BINOCULARS & OPTICS
by
Robin Leech, PhD, PBiol.
ABSTRACT
The Wollensak Optical Company started in Rochester, New York, in 1899, long after Bausch &
Lomb was established there in 1853. Starting in 1901, the Wollensak Optical Company made
precision camera lenses with iris shutters for large format cameras. Wollensak made many
hundreds of different lenses and optical equipment up to the mid-1950s when the Company was
purchased by Revere Camera Company. In turn Revere was purchased by 3M and closed in
1972. Anson Instruments purchased Wollensak in 1974, finally ceasing in 2001 when its
president, Rudolph Novak, died. In 2003, Surplus Shed purchased all Wollensak parts.
The Wollensak Optical Company made such diverse things as lenses for stereo 35 mm cameras,
and lenses for projectors. In 1920, the Company started making a series of different Galilean
field glasses, 6X23 Biascopes, 4X33 Commander and 4X33 Rambler. Made before and after
WWII were Allscopes of 2X25 and 3.5X25. These were replaced by a 3X25 Allscope with
WOLCOTE (MgF2 lens coating) as early as 1951. Allscopes are worn much like a pair of
glasses.
A patent for the Wollensak Porro-prismType I was filed on 16 January 1936, with the
Publication Date of 11 May 1937 (Publication # US2079890 A). The Company started making
the Porro-prism Type I binocular, the Wollensak 6X30. During WWII, these binoculars were
given the military designation of Wollensak 6X30 M5. The serial numbers of the Wollensak
6X30 binoculars are continuous from pre-WWII in 1937, through WWII, and through post-
WWII till production ceased in the early1950s. In the early 1950s, Wollensak contracted with a
German company to make 6X30 CF, 8X30 CF and 8X40 CF Porro-prism Type I, models called
Wollensak Escort. The Escort 6X30 serial numbers appear to be continuous with Wollensak’s.
Most if not all of the 40,000 Wollensak 6X30 M5 binoculars made were issued to the
Commonwealth Countries (especially UK and Australia) through the Lend-Lease Act of March
1941. This was established by President Franklin D. Roosevelt. If even half of these binoculars
reached their intended destination is a moot point. Again, most but apparently not all, of these
binoculars were issued with a reticle in the right eye column. The right eye column was the
norm for Commonwealth Countries (the norm was the left eye column for US military
binoculars). The U.S.-made reticle has 9 vertical lines (= stadia). The information reads:
“GRATICULE ½ ͦAPART AND ¼ ͦ, ½ ͦ AND 1 ͦ HIGH”. The U.S., U.K., and Australian
imprints or markings on 6X30 binoculars are interpreted and defined.
2
Post-WWII, as early as 1946, all of Wollensak’s 6X30 IF and 8X30 CF, 4X33 Ramblers as well
as 6X and 8X monoculars (right and left prism columns, both of which are Porro-prism Type I)
had WOCOTE lens coating (MgF2) (Vintage Magazine 1946; Advertisement, Wholesale Photo
Supply Co., Chicago, 1951). A number of Wollensak 6X30 M5 binoculars have come up for
sale in Holland and Italy on E-Bay. It is likely that these binoculars are ones that were issued to
UK troops during WWII, but most likely are post-battle field pickups, or ones given away at the
end of WWII. Wollensak contracted with a German company in the early 1950s, most likely the
Willy Krombach Optische Werke, Wetzlar, to make 6X30, 8X30 and 8X40, all CF, and Porro-
prism Type 1.
INTRODUCTION
MATERIALS AND METHODS
I have found much information through Google, using an assortment of key words, or the same
key words a week later where new information was given. I use E-bay for locating items (e.g.,
Wollensak Biascopes, Rambler, 6X30 and 6X30 M5 binoculars). The Binocular List server
made by Peter Abrahams has put me into contact with owners of 6X30 M5 binoculars from
Europe to Australia to North America. These sources have incredible and special information. I
have photocopies of sales ads from newspapers and magazines if anyone wants to see them.
Other sources are those with whom I worked while writing the papers on Canadian-made
binoculars.
A BRIEF HISTORY OF THE WOLLENSAK OPTICAL COMPANY
The Wollensak Optical Company was started in 1899 by Andrew Wollensak, who had been a
machinist with Bausch & Lomb. Andrew had helped Edward Bausch with the design of the iris
diaphragm shutter in 1890. In 1899, Andrew left Bausch & Lomb, and with his brother John, set
up a new company. Financial backing came from Stephen Rauber, a former president of the
Union Brewing Company. The original company was named Rauber and Wollensak. When
Rauber died in 1901, the company name changed to Wollensak Optical Company. By 1902,
Wollensak was producing lenses and iris shutters at reasonable prices. In 1905, Wollensak
purchased the Rochester Lens Company which made the popular “Royal” anastigmat lens. In
1909, Andrew Wollensak designed the famous “Optimo” shutter, which was widely sold until
1930 (ended with the Great Depression?).
In 1936, Andrew Wollensak died. He had been president since the company was founded.
Within a year of Andrew’s death, Wollensak Optical Company had obtained the patent to build
3
Porro-prism Type I binoculars (Publication # US2079890 A, filed date, 16 January 1936,
publication date, 11 May 1937).
[Compare this with the Bausch & Lomb history: B&L had obtained permission to make Porro-
prism Type I binoculars in 1890, as B&L was licensed through Carl Zeiss patents, with this
exchange giving Zeiss exclusive rights to the U.S. market, and ultimately to the first prism
binoculars. These were the first Zeiss prism binoculars, which also went out in North America
under the Bausch & Lomb name plate. Many of these early prism binoculars had both Zeiss and
B&L names on the prism plates. (Source: see Link to “The Bausch & Lomb History”). This was
a 47 year lead over Wollensak for the production of prism binoculars (1890 to 1937)]
HISTORY OF WOLLENSAK PRODUCTS
Thousands of different lenses and pieces of optical equipment (see Google: Wollensak Optical, a
Surplus Shed Company) were made by the Wollensak Optical Company, including the following
examples (Figs 1 and 2). In 1954, even the Polaroid Pathfinder “110” had a Wollensak Rapax
Synchromatic, which is an f 4.5 lens.
Fig. 1. A selection of Wollensak large-format camera lenses.
The lenses are coated (1939 or later). Photo: Tom Leech.
4
Fig. 2. Wollensak 6.25 inch, f 12.5, Extreme W.A. Note that
the lens is coated. This lens is among the favorites of those
who use large-format cameras, especially 4X5 Speed Graphic.
Photo: Tom Leech.
Below is a partial list of the various optical items made by Wollensak. As there were some 1200
employees in the Wollensak Optical Company, it is most likely that this vast assortment was
being made continuously:
- Large format cameras (4X5, 8X10 and larger); larger lenses with iris shutters;
- Galilean and prismatic binoculars;
- Movie cameras and lenses;
- 2 ¼ X 2 ¼ format camera lenses;
- 35 mm stereo camera lenses;
- Lenses especially for Speed Graphic cameras (4X5 inches);
- Telescopes; and,
- Microscopes for students: 150X and 425X.
WOLLENSAK GALILEAN FIELD GLASSES
Wollensak Optical Company’s first ventures into binocular-type optical equipment were with
Galilean Field Glasses (i.e., no prisms). There were at least 5 varieties, all Biascope models, but
each distinct [e.g., made of brass, Bakelite, different Fields of View (FoV and different Inter-
Pupillary Distance (IPD), lever vs wheel focussing]. The first ones appeared in 1920, and were
still being advertised for sale up to 1939. Most have bodies made partly of brass, and finished
with black paint (Figs 3, 4). One is made of Bakelite. All have a very narrow FoV (Figs 5, 6) by
5
today’s prism binocular standards. All are 6X23, more or less flat (except for Model B), and
with fixed but different IPD (e.g., 58 mm and 63.5 mm) (Figs 8, 9). The W.F. 63.5 has the
widest FoV of all the Biascopes. The IPD of Model B extends from 58 to 70 mm. All models
have uncoated lenses. A sliding lever adjusts the focussing (Figs 5. 6. 7 and 8), except for Model
B, which had a focussing wheel (Figs 3, 4). They are small, 8 cm high x 9 cm wide. Weight is
140 g (5 oz.) for the Bakelite model; 220 g (8 oz.) for the W.F. 63.5 model; and 250 g (9 oz.) for
Model B. Suggested uses were for opera and hunting.
Fig. 3. Wollensak Biascope “B”, the only one of the Biascopes
with a knurled wheel for focussing. The others have a lever for
focussing. The Biascope “B” is unique among the Biascopes as
it is hinged, permitting the IPD to be changed from 58 – 70 mm.
Photo: Robin Leech.
6
Fig. 4. A close-up photo of the focussing wheel for the Biascope
Model “B”. All of the Biascopes are 6X23. The adjusting hinges
for the IPD show clearly. Note the chromed adjusting arms for
changing the focus internally. All the other Biascopes move the
entire eyepieces externally. Photo: Robin Leech.
7
Fig. 5. Wollensak Biascope Model E. Note the focussing
lever. These binoculars are made of bakelite. The lenses
are not coated. 6X23. Photo: Robin Leech.
Fig. 6. Wollensak Biascope Model E, 6X23. Close-up of the
dial plate and focussing lever. Photo: Robin Leech.
8
Fig. 7. Wollensak Biascope Model 63.5 W.A. 6X23. Body is
brass with black paint. Photo: Robin Leech
Fig. 8. Wollensak Biascope Model 63.5 W.A. 6X23. Close-up
of the dial plate and focussing lever. Photo: Robin Leech
9
Fig. 9. Wollensak Biascope with 6X power and 58 mm IPD.
The focussing lever on the left is set at the midpoint between
the (+) and the (-). Biascope field glasses were not given serial
numbers. Photo: Robin Leech.
RAMBLER FIELD GLASSES, 4X33
The Rambler 4X Travel is the 5th
of the Wollensak Galilean Field Glasses, and at 4X33, are very
different from the Biascopes. The Rambler first came out in 1933 with the name plate “Biascope
Commander” and uncoated lenses. An advertisement by N. Shure Co., Chicago, dated 1933, has
an item labelled “Biascope Commander”, 4X, which looks identical to the Rambler (Fig. 10). I
suggest it is possible that the Wollensak Commander was the first of this model, and that in short
order it was renamed “Rambler”, or, that it did not reach production, a possibility suggested by
Peter Abrahams, email, 15 July 2015).
10
Fig. 10. Early, pre-WWII version (upper) of the Rambler 4X33
with the script, Rambler, and with uncoated lenses, and the
post-WWII 4X33 version of the RAMBLER, with purplish-
coated lenses (lower)(MgF2). Photo: Robin Leech
The Commander and the Rambler are both 4X33 (though the advertisement for the Commander
reads 35 mm objective), thus very different from the other Biascopes which are 6X23. I do not
think the Biascopes and Rambler models were made during WWII. Those Ramblers made pre-
WWII have uncoated lenses (upper in Fig. 10), whereas those made post-WWII (during the late
40s and early 50s) have coated optics (lower, Fig. 10) with obvious purple MgF2 coatings, at
least on all external lens surfaces. These were for sale until 1952 (Wollensak magazine
advertisement). There is a fixed IPD and CF. Weight is 240 g (8.75 oz). Only one body
version was made. The pre-WWII has “Rambler” in a script (upper in Fig. 10), whereas the
post-WWII has regular “RAMBLER” on the ocular bridge (lower in Fig. 10). The pre-WWII
pigskin leather case has 2 snap buttons for the closing flap; the post-WWII case has one central
snap button.
ALLSCOPE FIELD GLASSES (2X25, 3X25 and 3.5X25)
The Allscopes, Model A @ 2X25, and Model B @ 3.5X25, were designed to be used at sporting
events and operas. It appears that the 3.5X25 model was changed to a 3X25 model in the late
11
1940s or early 1950s with the suggestion that it can be used for hunting. They are Galilean Field
Glasses, and are fitted on the user’s face with arms securing to the ears, just as with regular
glasses. To quote, “…rests on your nose like sunglasses, leaving your hands free.” They have a
nose bridge and nose pads. I have not found out how long they were manufactured, but most
likely from 1930-39, and definitely in 1938, and again in the late 1940s or early 1950s (51-54)
for Models A and B. The pre-WWII lenses are not coated, but the post-WWII by 1946 lenses
were coated with WOCOTE. As a point of interest, I mention that WOCOTE and BALCOTE
are the same lens coating material – MgF2, or Magnesium Fluoride.
All of the Allscopes have a variable IPD, and focus is IF (Fig. 11a knurled ring and diopter
adjustment ring). A 3X25 Allscope appeared about 1953 (Fig. 11a&b,12); it has coated optics,
and as near as I can tell is a replacement for both Models A & B. The Hadco 3X “Sport Ocular”
advertised and sold in 1954 is CF and Galilean, and most likely with coated optics.
Fig. 11a. Top view of the Wollensak Allscope 3X. The diopter adjustment
is set at 0. Note the knurled ring next to the row of white dots for each eye.
This is for IPD adjustment for each eye relative to the nose bridge – simple
but very effective. Photo: Robin Leech.
12
Fig. 11b. Objective end view of the Wollensak Allscope 3X25. The lenses are
coated. Part of the knurled IPD ring can be seen on the left tube next to the
nose bridge. It is resting on a black cowhide leather case with Wollensak on
the flap. Photo: Robin Leech
Fig. 12. Ocular end view of the Wollensak Allscope 3X25. The binocular arms fold up
next to the oculars and fit snugly into the factory leather case. Photo: Robin Leech.
13
WOLLENSAK 6X30 PORRO-PRISM TYPE I BINOCULARS
Discussion and Patent Application
This is the Patent Application (date of Filing) and Patent Issue for the Wollensak 6X30 Porro-
prism Type 1 binocular.
PRISM BINOCULAR US 2079890 A
Publication number: US2079890 A
Publication type: Grant
Publication date: 11 May 1937
Filing Date: 16 January 1936
Priority Date: 16 January 1936
Inventors: Wollensak Andrew, Gustav F. Pirwitz
Original Assignee: Wollensak Optical Company
Export Citation: BiBTeX, EndNote, RefMan
Referenced by (7), Classifications (5)
External Links: USPTO Assignment, Espacenet.
The Wollensak 6X30 Porro-prism Type 1 assembles and disassembles very differently from any
of the other U.S.-, European- or Japanese-made prism binoculars. Fig. 13 shows one that is
disassembled. Two threaded retainer rings (one on each side) next the ocular and the external
body are all that hold the binoculars together. If the binoculars become dirty or wet, loosening
these two threaded retainer ring allows the binoculars to be taken apart without interfering with
the alignment (i.e., the collimation of the lenses and prisms). This feature alone makes them
unique among prismatic binoculars.
14
Fig. 13. The Wollensak 6X30 Porro-prism Type I (military designation M5) binoculars are
not as rugged, waterproof or as durable as are the standard B&L-type binoculars, but they
can be taken apart and repaired in the field. They are much lighter, and they are much
cheaper and faster to make. Photo: Frank Lagorio.
The Wollensak 6X30, IF, civilian version from 1937-1940, has uncoated optics. With the start
of WWII, President Roosevelt made behind-the-scenes arrangements in 1940 to give Great
Britain some of the equipment needed to fight a war (via the Lend-Lease Act) with both
Germany and Japan. In early 1941, the U.S.Army accessed the Wollensak 6x30, and designated
it the M5, IF, Military (1940-1945), with uncoated and coated optics. Weights are various from
505 g (1 lb, 2 oz.) to 540 g (1 lb, 3 oz.); FoV = 7 ͦ 10’ (124.5 m@1000 m; 375 ft@1000 yds);
tan-colored pigskin case with WOLLENSAK printed on the lid.
15
Fig. 14. Wollensak 6X30 M5, IF, binoculars. These were issued as
early as 1940, mainly to Britain and Australia. Note the “Coated
Optics” sticker on the right objective cover ring. See text above
and below for more information. Photo: Robin Leech.
16
Fig. 15. All markings are U.S., and though this one went to
the U.K., it was not imprinted with UK markings (see text
for the reason). Photo: Robin Leech.
17
Fig. 16. Wollensak 6X30, M5, Lend-Lease Act to Australia.
See figure 17 for the Australian imprint. This pair was probably
used in the Papua-New Guinea conflict starting in early 1942.
Photo: Robin Leech.
18
Fig. 17. Objective end view of the two prism cover plates. See the text for an
explanation of the Australian imprints. The Serial # is 28,666 (See Table 1,
entry # 11). The original US Army marking of “F.J.A.” is barely visible, right
prism cover, below the Serial #. Photo: Robin Leech.
The reticle, or graticule, used in the Wollensak 6X30 M5 binoculars is one of the simplest and
easy to use of those issued during WWII (Fig. 18 ). It was designed for quick use to give
approximations or estimates. It is not an exact measuring tool. In the following examples, all
measurements are Imperial (i.e., feet, yards), not metric. Consider the following:
Knowing that 1 inch is 1 minute of angle at 100 yards, it follows that a degree represents roughly
5 feet (60 minutes in 1 degree; 60X1=60 inches= 5 feet) at 100 yards. Therefore, a man spotted,
who appears to be a bit taller than the ¼ degree vertical stadium, is approximately 400 yards
away (4X100=400 yards, or 1200 feet). This rule can be used horizontally as well as vertically.
A truck is estimated to be 20 feet long; when viewed through the binoculars, the truck occupies
two of the reticle spacings (= 1 degree), then the truck is 20X60 = 1200 feet, or 400 yards away.
The Wollensak 6X30, IF, post-WWII civilian version, 1945~1954, with coated optics, looks
identical to Fig. 14, and many even have the same “Coated Optics” sticker on the objective cover
ring. About the only ways to distinguish the civilian model from the WWII model are by the
serial # and the presence of a reticle in the military ones. The civilian and military binoculars
were issued with the same tan-colored pigskin case with WOLLENSAK on the lid.
19
Fig. 18. The reticule used in the M5 and M6 prismatic
binoculars. The 9 stadia are interpreted as follows:
½ ͦAPART AND ¼ ͦ, ½ ͦ AND 1 ͦ HIGH.
Photo: Frank Lagorio.
The Wollensak 8X30, CF, was a civilian model issued in the late 1940s ~ 1953 (Fig. 19). They
have coated optics, and weight 540 g (1 lb, 3 oz.). They were issued with a black cowhide case.
20
Fig. 19. Wollensak 8X30 CF binoculars. This was made for
civilian use, post-WWII. The body of the 8X30 CF is identical
to that of the 6X30 IF. Note the “Coated Optics” sticker on the
right objective lens cover ring. Photo: Robin Leech.
WOLLENSAK 6X30 AND 8X30 MONOCULARS
Wollensak made 6X30 and 8X30 monoculars, using the right & left columns from the
binoculars, as early as 1951~ 1954. The optics are coated (Fig. 20).
They weigh 240 g (8.5 oz.). They were issued with a small, black cowhide snap-button case
with the word “Wollensak” in script on the flap. It appears that no more of the Wollensak
Porro-prism Type I, in 6X30 and the 8x30, as binoculars or monoculars, were made after 1953 or
1954. About this time, Wollensak brought in the German-made Escort in three models (Figs 21,
22, 23), as it appears that Wollensak stopped making its own binoculars.
21
Fig. 20. Two Wollensak monoculars: 8X30 and 6X30, resting on
a black leather Wollensak case. Binoculars are far easier to use
than are monoculars. Photo: Robin Leech.
GERMAN-MADE WOLLENSAK ESCORT MODEL BINOCULARS
It is most likely that the three Wollensak Escort binoculars, 6X30, 8X30 and 8X40, were made
by Willy Krombach Optische Werke in Wetzlar, Germany (Klaus Kubetz, email, 26 July 2015).
Wetzlar was located in the American Sector of what used to be West Germany.
Willy Krombach Optik was manufacturing binoculars just after WWII, and included in the ones
made were 6X30. In immediate post-WWII Germany, Wetzlar had been the Mecca for optics in
Germany (Klaus Kubetz, email, 26 July 2015), and that Krombach Optik had close ties with the
Americans.
22
Fig. 21. Wollensak Escort 6X30, left prism cover. These
binoculars were made in the early 1950s in the American
Sector of West Germany for Wollensak Optical Company.
Photo: Robin Leech
Fig. 22. German-made Wollensak Escort 6X30, right prism
cover. Access to the prisms is via the ocular and the objective
prism plates. Photo: Robin Leech
23
Fig. 23. German-made Wollensak Escort 6X30, Porro-prism
Type 1, objective end hinge plate. Photo: Robin Leech.
There were two other Wollensak Escort models made in Germany for Wollensak. They are the
8X30 CF, and the 8X40 CF, all with coated optics. Other than as images in advertising
brochures, I have not seen the 8X30 CF or the 8X40 CF Escort, and I have not seen any for sale.
From the Google Patents Description, I quote and paraphrase the following text. Paraphrasing is
necessary because of many serious typos in the download (accessed 20 June 2015):
“The invention relates to a prism binocular, and has for its object to afford a simple, economical
and improved construction that facilitates positioning and adjusting of the prisms and optical
systems. The new design makes possible easy access to the prism, prism support and optical
systems by means of a prism-enclosing housing. The housing is removable and positionable
after the prisms and optical systems are permanently located on their support.
“In prior types of construction, the enclosing-housing has been constructed integrally with the
body portion that carries the hinge members, or otherwise arranged, so that it has been necessary
to insert the prisms through one or both ends of the housing, and position and adjust them within
the housing. It has been a particular object of the present invention to remove the objections to
these former structures by using a housing that surrounds and encloses the prisms and optical
systems, and which is not assembled in an operative position until after the prisms and optical
systems are permanently adjusted.
“A further object of the invention is to afford a simple and improved means for adjusting the
prisms on their support in relation to the optical system and retaining them permanently in such
an adjusted position, so as to prevent any inaccuracy in the instrument after continued use.”
The mechanical and physical design, including the assembly, of the Wollensak 6X30 M5, IF,
Military, were new in 1937. The reticule in the Wollensak 6X30 M5 is simple, and is quick and
24
easy to use. There are 9 stadia: “GRATICULE ½ ͦ APART AND ¼ ͦ , ½ ͦ AND 1 ͦ HIGH”. The
centre stadium is the longest. The U.S.-made M5 and M6 binoculars have the same reticle, as
they were made for the Lend-Lease Act to go to the UK and the Commonwealth countries. As
WWII started on 1 September 1939, I strongly suspect that US President Franklin D. Roosevelt
had been negotiating with UK’s Prime Minister, Sir Winston Churchill, long before the U.S. was
fighting in WWII. The Lend-Lease Act of March 1941 legalized what was already happening.
MILITARY DATA FROM THE WOLLENSAK 6X30 M5 BINOCULAR
The data for the Wollensak 6x30 M5 with the lowest serial number I have seen is this:
- Ser. # 2641, and no date of manufacture, but evidence suggests 1941;
- Lenses not coated, no “Coated Optics” sticker, and no reticle;
- Issued under the authority and aegis of Col. Ray L. Bowlin (R.L.B.)
- U.S. Army.
The initials R.L.B., and U.S.Army, appear on Wollensak 6X30 M5 binoculars from about serial
# 2,500 to about serial # 10,000. R.L.B.’s initials also appear on B&L binoculars, so it is
possible that he was switched from Wollensak to B&L, or that initially his authority covered
both Wollensak and B&L binoculars (both factories being in Rochester, New York).
At any rate, F.J.A. (for Col. Frank J. Atwood) initials and U.S. Army appear on all Wollensak
6X30 M5 binoculars with serial numbers from about 10,000 to about 40,000. Somewhere
between serial #s 39,000 to 42,500, these binoculars may or may not have had “F.J.A.” and
“U.S.Army” on the prism plate. I have seen a Wollensak 6X30 M5 prism plate with serial #
39,820 with no F.J.A. or U.S.Army authorization, and another with serial # 41,0xx (numbers
were obscured by damage) but with F.J.A. and U.S.Army authorization.
Colonels Ray L. Bowlin and Frank J. Atwood did not actually check each binocular, but they did
go out under the authorization or “watch” of each. In other words, had there been a problem, the
respective colonel would have been called to answer.
Frank Lagorio (pers. comm.) considers that Wollensak 6X30 M5 serial #s of from 33,960 to
about 40,000 were made between 1943 and 1945. Serial #s higher than that are for commercial
Wollensak binoculars
The main change required to convert a commercial prism binocular to one for military use was to
insert a reticle. A reticle (or in UK speak, a graticule!) is a flat, glass disc. The reticle is usually
made of baryta light flint or spectacle crown glass. Both surfaces are polished to within 2
minutes of arc (Encyclopedia of Army Ordnance Binocular, circa 1944: p.5). In those binoculars
prepared for US military service, the reticle was in the left eye column. For those binoculars
25
prepared for British Commonwealth service, the reticle was placed in the right eye column. On
one surface of the flat glass disc, lines and numbers were etched into the glass then filled with an
opaque material to make the etched lines visible.
Some companies, including Bausch & Lomb and Wollensak, were authorized to use a photo-
printed reticle. The lines and numbers were not etched into the glass, but were deposited on the
surface by a photo printing process. This deviation was granted to expedite delivery to users
(Encyclopedia of Army Ordnance Binoculars, circa 1944: p.5). In my collection of Wollensak
6X30 M5 binoculars, I have both etched and photo- printed reticules. The difference is obvious:
the etched reticles were, and still are, sharp and distinct, whereas those lines in the photo-printed
reticle, which were never as sharp and distinct as the lines etched on glass, are now over time
even less distinct and precise – the coloring has flowed from the lines. Also, looking through
glass gives a much sharper viewing than does looking through photo film.
U.S. ORDNANCE HISTORY RELATIVE TO 6X30 BINOCULARS
Funds for developing a waterproof, shockproof, fully military binocular for the interim of 1921
to 1940 were not available. The Ordnance Department realized in 1940 that it would have to
adopt and modify commercial models of binoculars. The commercial tooling and equipment
existed, so commercial models were brought in to meet military delivery requirements. To some
degree, this was a repeat of the situation regarding binocular history for World War I
(Encyclopedia of Army Ordnance Binoculars, Circa 1944: p.5), and also in Canada when the
Korean War broke out (Leech, 2015).
The model selected was the Bausch & Lomb 6X30 commercial model. From B&L, 18,617
binoculars were procured. The initial order was for 2,404 binoculars on 14 March 1940. This
binocular was given the official military designation “Binocular, M3”. This indicated a Standard
Army Issue Model #3 in the “M” series of binoculars (Encyclopedia of Army Ordnance
Binoculars, Circa 1944: p.5). Nash-Kelvinator and Westinghouse also made the M3 binocular.
The significance of the information in the two paragraphs above is that the Wollensak 6X30,
though a commercial model in early1940, had not, as of 14 March 1940, been entered into the
official military designation, where it ultimately became “M5”. By 10 February 1941, before the
Lend-Lease Act was in place, there were incomplete negotiations for 20,000 Wollensak 6X30
binoculars (presumably with a reticle, though I have seen low-serial-numbered M5s with no
reticle). By 14 May 1941, “The U.S. has contracted with Wollensak for 16,000 for us, delivery
in 4 months at 1,000 per month.” (see comments below from Terrence Wayland, information
from the British National Archives). This means that Wollensak had approximately 4 years
between receiving the patent, commercial production, and then military binocular production in
early 1941.
26
By inspection, it is obvious that the serial numbers of the civilian, pre-WWII Wollensak 6X30,
U.S. Military Wollensak 6X30 M5, and the post-WWII Wollensak 6X30 are sequential. The
pre-WWII serial numbers ended about Serial # 2500. The Wollensak 6X30 M5 serial #s start
about 2500, and continue to about serial # 41,000. The post-WWII serial #s are from about
41,000 and up to the end of production (last serial # unknown, but near 49,000 with the
Wollensak Escort binocular made in Germany).
BRITISH PURCHASING COMMISSION AND THE LEND-LEASE ACT OF 1941
In the British National Archives, there are files containing copies of telegrams to and from the
British Purchasing Commission. These relate to the purchase of binoculars from the United
States up to 1942. The following, selected dates and observations by Terence Wayland, are
those which refer to Wollensak.
It has been my contention all along that equipment went from the United States to the UK before
the Lend-Lease Act of March 1941 was a legal agreement. The Lend-Lease Act was proposed in
late 1940, and passed in March 1941. It was the principal means for providing U.S. military aid
to foreign nations during WWII. It authorized the President to transfer arms or any other defence
materials for which Congress appropriated money to “the government of any country whose
defence the President deems vital to the defence of the United States.” By allowing the transfer
of supplies without compensation to Britain and the Commonwealth countries, China, the Soviet
Union and other countries, the Act permitted the United States to support its war interests
without being overextended in battle.
BRITISH NATIONAL ARCHIVES DOCUMENTATION OF THE WOLLENSAK 6X30
M5 BINOCULARS
Though the UK may have received all the documents (see immediately below), many Wollensak
binoculars may have gone straight to Australia, and would have been in service much more
quickly. And, by being sent directly to Australia, shipping of the binoculars would not have
been subject to U-boat sinking going to and from UK. I am citing Terence’s data verbatim
below (Wayland, T., 21&25 March 2015, by email):
The source of the information below is the file CAB 115/185 in the British National Archives. It
contains extracts of cables between the U.K. and the British Purchasing Commission in the
U.S.A. 1940 to 1942. Unfortunately, there are gaps in the records and no details of shipments.
20 February 1941.
“Incomplete Contracts. Wollensak a possible 20,000, if they can provide their own glass.”
27
14 May 1941.
“The U.S. has contracted with Wollensak for 16,000 for us, delivery in 4 months at
1,000 per month.”
22 July 1941.
“Position on Wollensak binoculars ?”
25 July 1941.
“Wollensak, lend lease contract for 16,000 at 1,000 per month from October. A total of
58,682 6X30’s were [was] requisitioned under lend lease, balance after deductions re
Frankford Arsenal and Wollensak is 32,682.”
[R.Leech note: It is possible that, though 58, 682 6X30 Wollensak binoculars were
requisitioned, some were en route to UK on freighters, but were sunk by U-boats, leaving about
40,000 seeing active service. However, I admit that the lack of serial numbers from 45,000 up to
around 58,000 does not support this idea.]
The British Purchasing acted on behalf of all countries in the British Empire (= Commonwealth).
There is no information regarding disposal to Australia, New Zealand, South Africa and India.
Many of the binocular originating in the U.S.A. and Canada were sent directly to these countries,
and never arrived in the U.K, (Terrence Wayland, email, 21 July 2015). Roger Davis of
Bankstown, NSW, Australia, reported (pers. comm. e-mails, 25 & 31 March 2015) that York
Optical was started by Martin Gertler and Arthur Geddes after WWII, perhaps in 1949.
Martin and Arthur were given the task of holding the impressment records of all optical
equipment seconded by the Defence Forces for WWII. Roger remembers Martin saying that
they used to mark the binoculars upon impressment with the Defence Force Arrows, and that the
arrow being with either one of two tines, dependent upon quality (Roger Davis, Pers. Comm., 31
March 2015, email).
Wollensak made about 40,000 binoculars, designated Wollensak 6X30 M5, for the British
Empire (= Commonwealth countries) between 1941 and 1944 (Binoculars and scopes – U.S.
Militaria Forum, 17 September 2011. Accessed 25 June 2015.) Seeger (1996/2002: 59) dated
the Wollensak 6X30 from 1937 to 1940. I interpret these dates to be civilian dates, and that as of
1941, Wollensak 6X30 became the military Wollensak 6X30 M5. The one Wollensak 6X30 M5
that Seeger shows (1996/2002: p. 59, Fig. 29b) has serial # 6559, U.S. Army and initials R.L.B.
(see discussion in this article, and Table 1 below). Rohan (2001: p.23) also considered that the
Wollensak 6X30 M5 was made from 1941 to 1945.
The New Guinea Campaign of the Pacific started on 23 January 1942, and involved U.S. and
Australian forces against the Japanese Imperial Forces. This was almost a year after the first
negotiations involving the Lend-Lease Act, and about 8 months after possible delivery of
28
binoculars to the Commonwealth countries started. This was plenty of time for the Australians
to receive thousands of Wollensak 6X30 M5 binoculars with the U.S.Army data, including serial
numbers, and for these binoculars to be over-stamped (=over-printed) with Australian markings
(see Table 1 below)..
Note that for Commonwealth Countries the reticule (or graticule as they call it) is in the right eye
column. No one has yet been able to explain to me a satisfactory reason for this difference. As
most soldiers are right-eye dominant, and as most shoot from the right shoulder, putting the
reticle in the right eye makes more sense to me.
Table 1 below shows all the data I have, which I have seen, or which has been sent to me
regarding Wollensak 6X30 M5 binoculars. The Australian Impress or Markings are these:
D/I\D. No2 MKII V6/VFA 0221. The marking “D/I\D” means Department of Defence, with
the Arrow (or Broad Arrow) /I\ in between. No. 2 MK II is the British and Australian Military
model designation (equivalent to the U.S. Army “M5”), signifying a 6X30 prismatic binocular
with a reticle (or with UK and Australian terms, a graticule). Roger Davis suggests that the “V6”
stands for “Value”, and the assigned value level of 6. The “”VFA” most likely stands for
“Visiting Forces Agreement”. The number “0221” ties in with the VFA.
Terence Wayland summarized the British, and by default, the Australian imprints succinctly
(email, 21 July 2015). The “MK” designation applies only to those binoculars supplied by
British contractors with the official specifications. This one fact alone is the reason that none of
the Wollensak 6X30 M5 binoculars have UK imprints on them. The “No 2” designation related
to 6X30 models. Those with “Mk I” did not have a reticule; those with “Mk II” have a reticule;
and those with “Mk III” have a reticule and are also waterproof. After WWI, the British firm
Kershaw supplied the vast majority of “No 2”, and by the end of WWII, Kershaw had produced
250,000. Those binoculars with the same specifications supplied to the Royal Air Force had a
Stores Reference with the prefix “6E/” (Terrence Wayland, email, 21 July 2015).
Table 1. WOLLENSAK 6x30 M5 BINOCULAR DATA (N=25)
SERIAL # BODY
COLOR
US ARMY &
AUTHORIZ.
COLONEL
AUSTRALIA
N IMPRINTS
Y/N
COATED
OPTICS Y/N
RETICLE
Y/N/? R/L
2641 Black USArmy/RLB N N N
6559 Black USArmy/RLB N N Y
8220 Black USArmy/RLB N N Y, R
10,015 Black USArmy/FJA N N Probably
11,525 Green USArmy/FJA Y* Y Y, R
29
13,567 Black USArmy/FJA N N Y, R
13,830 Black USArmy/FJA N ? Probably
14,205 Black USArmy/FJA N N Y, R
15,649 Black USArmy/FJA N N Y, R
18,891 Black USArmy/FJA N N N
28,666 Green USArmy/FJA Y* Y Y, R
30,483 Green USArmy/FJA Y* Probably Probably
33,612 Black USArmy/FJA N Y Y
33,730 Black USArmy/FJA N Y Y, R
33,811 Black USArmy/FJA N Y Probably
33,960 Black USArmy/FJA N Y Y, R
34,369 Black USArmy/FJA N Y N (not R or L)
34,413 Black USArmy/FJA N Y Probably
34,526 Black USArmy/FJA N Y Y, R
35,700 Black USArmy/FJA N Y Y, R
38,105 Black USArmy/FJA N Y Probably
39,820 Black N N Y Post-WWII?
41,0xx** Black USArmy/FJA N Y Post-WWII?
42,575 Black N N Y Post-WWII?
44,993 Black N Y Y Post-WWII?
*Australian Marking: D/I\D No2 MKII V6/VFA 0221; **Last 2 digits obliterated
By the late 1940s, or the very early1950s (magazine advertisement of 1954, for sale on Ebay),
Wollensak contracted with a West German company to make and supply prism binoculars. This
was a departure from making its own 6X30 IF and 8X30 CF binoculars. Those binoculars made
under contract were called Wollensak Escort. They were made in 6X30 CF; 8X30 CF; and
8X40 CF, in Porro-prism Type I (Figs 21-23) with the typical European body style, not the
unibody B&L style. The lenses are coated. It appears to be Wollensak’s final dealing with
binoculars before being bought out by Revere Camera Company. The Revere Camera Company
in turn was purchased and closed by 3M in 1972. Anson Instruments purchased Wollensak from
3M, finally closing in 2001. In October 2003, Virginville Lens Company, d/b/a (=doing
business as) Surplus Shed, purchased the remaining assets of Wollensak Optical. Included were
thousands of completed lenses and lens assemblies, production equipment, original mechanical
and optical drawings, etc.
30
CONCLUSIONS
The Wollensak Optical Company started making camera lenses with iris shutters in 1901, and in
1920, started making a number of models of Galilean field glasses. There are five models of
6X23 Biascopes; two models of 4X33 Commander and Ranger; and three models of 2X25, 3X25
and 3.5X25 Allscopes (fitted to be worn like glasses).
The Wollensak 6X30 Porro-prism Type I binoculars were in civilian use from 1937 till 1940. In
1941, they took on the U.S. Military nomenclature of Wollensak 6X30 M5 and all production
was given to the Lend-Lease Program. Post-WWII Wollensak binoculars merely had the U.S.
Military markings and reticle removed. The Wollensak 6X30 serial numbers are continuous
from the earliest made in 1937 till production stopped in the 1950s. Through the U.S.-initiated
Lend-Lease Act of March 1941, Commonwealth countries, but especially Britain and Australia,
received between them about 40,000 Wollensak 6X30 M5 binoculars. Etched glass reticles are
much superior to those with the photo-printed process; the M5 has either type of reticle.
Wollensak 6X30 M5 binoculars were shipped to UK, and directly to Australia as early as late
1941, and put into use in January 1942 in the New Guinea (aka PNG) Campaign. The shipping
of Wollensak binoculars to the Commonwealth countries continued till at least 1944. By 1946,
all Wollensak lenses were coated (WOCOTE, or MgF2).
By the late 40s or early 50s, Wollensak Optical Co. contracted with a European binocular maker
to provide 6X30 CF, 8X30 CF and 8X40 CF Porro-prism Type I under the name Wollensak
Escort, and these were sold by Wollensak at least in 1954 (magazine advertisement). The
Escort binoculars have the typical European body, not the B&L unibody. Wollensak was
purchased by Revere Camera Company in the mid-1950s. Revere in turn was purchased and
closed by 3M in 1972. Anson Instruments purchased Wollensak from 3M in 1974, finally
closing it in 2001.
ACKNOWLEDGEMENTS
Peter Abrahams is thanked for sending literature that was unavailable to me, and for bringing me
on board as a member of his online Binocular List, especially starting with number 600, as this is
the one that brought Guus Duchateau (Holland), Terence Wayland (UK), and Roger Davis
(Australia) into contact with me. They responded to Binocular List 600, dated 2015.03.05, and
they provided information about the Wollensak 6X30 M5 binoculars each owns.
In addition, Terence Wayland provided me with invaluable, otherwise unavailable information
from the British National Archives on the numbers of Wollensak 6X30 M5 binoculars requested
31
via the U.S. Lend-Lease Act on what was delivered and when. Roger assisted by checking into
the Australian War Memorial Materials Records office about the Australian markings on the
Wollensak 6X30 M5 binoculars. Hans Seeger, of Zeiss fame, is thanked for comments on post-
WWII German binocular companies, and Klaus Kubetz, of Leitz ELCAN fame, is thanked for
providing information on the Willy Krombach Optische Werke, Wetzlar, a West German
binocular company, and that this company most likely made the Escort binoculars for
Wollensak.
My brother Tom Leech is thanked for proofing the text, and for providing photos of Wollensak
camera lenses in his collection. Frank Lagorio of Winnipeg is thanked for information on
possible dates of manufacture for Wollensak 6X30 M5 binoculars. Frank is also thanked for
providing the original digital photo of the disassembled Wollensak 6X30 M5. Ethan Wallwork
and Andrew Eisenhawer are thanked for helping me to “clean up” and reduce images for use in
this article. Information on the use and interpretation of reticles was contributed by long-time
friends, Gord McGowan of Milarm Company, Edmonton, Alberta, and Blair Halt, also of
Edmonton.
REFERENCES
Abrahams, Peter. Binocular List #s 600-605, Mar-June 2015.
europa.com/telscope/binotele.htm
Bausch & Lomb History. Accessed 20 June 2015.
http://www.fundinguniverse.com/company-histories/bausch-lomb-inc-history
Binoculars and scopes – U.S. Militaria Forum. Posted 17 September 2011.
Accessed 25 June 2015.
British National Archives. CAB 115/185. (Source: Terence Wayland, email, 21 March 2015.)
Davis, Roger. Pers. Comm., email. 25&26&31 March 2015.
Duchateau, Guus. Pers. Comm., email. 19 March 2015.
Encyclopedia of Army Ordnance Binoculars. Circa 1944. Frankford Arsenal,
Philadelphia, Pennsylvania. 84 p., illustrated.
Google: Wollensak Optical, a Surplus Shed Company (accessed 16 June 2015).
32
Google Patents. Patent US2079890 A – Prism Binocular (Accessed 20 June 2015).
History.com. Lend-Lease Act, March 1941. World War II.
Lagorio, Frank. Many Pers. Comms. By email during 2014-15, images of
disassembled Wollensak 6X30 M5 binoculars and reticle.
Leech, R. 2015. Canadian-made binoculars, Part 2: BOP & CAL retrofits of RELs in
the early 1950s. Canadian Historical Arms Society. 13 p., 11 figs
http://home.europa.com/~telscope/Leech.2015.Canadian.made.binoculars.2.pdf
Rohan, S. 2001. A Guide to Handheld Military Binoculars. Optical Press, Bradbury,
California. iv+183 p., illustrated. ISBN: 0-9709003-0-9
Seeger, H. 1996/2002. Militārische Fernglāser und Fernrohre in Heer, Luftwaffe und
Marine (Military Binoculars and Telescopes for Land Air and Sea Service).
537 p., 323 figs. ISBN: 3-00-000457-2.
Vintage Magazine. 1946. Wollensak WOCOTE Binoculars magazine print ad.
Wayland, Terence. Pers. Comm. by email, 21&25 March 2015; and 21 July 2015.
Wollensak Optical Company. Accessed 21 June 2105. Wollensak Optical Company at
Historic Camera’s History Librarium.