Process Engineers' Codes & Standards - Prelminary

Publisher Code or Standard Comments

ABSA Alberta Boilers Safety Association SI units used when provided for in codes

AICHEANSI K61.1 Safety Requirements for the Storage and Handling of Anhydrous Ammonia ABSA

ANSIANSIAPI A. @ InterpretationsAPI B. @ Exploration & ProductionAPI C. @ Petroleum Measurement (Manual of Petroleum Measurement Standards) API C. Chapter 1, VocabularyAPI C. Chapter 10, Sediment and WaterAPI C. Chapter 11, Physical Properties Data (Volume Correction Factors)API C. Chapter 12, Calculation of Petroleum QuantitiesAPI C. Chapter 13, Statistical Aspects of Measuring and SamplingAPI C. Chapter 14, Natural Gas Fluids MeasurementAPI C. Chapter 15, Guidelines for Use of the International System of Units (SI) in the Petroleum and Allied Industries

API C. Chapter 16, Measurement of Hydrocarbon Fluids by Weight or MassAPI C. Chapter 17, Marine MeasurementAPI C. Chapter 18, Custody TransferAPI C. Chapter 19, Evaporation Loss MeasurementAPI C. Chapter 2, Tank CalibrationAPI C. Chapter 20, Allocation Measurement of Oil and Natural GasAPI C. Chapter 21, Flow Measurement Using Electronic Metering SystemsAPI C. Chapter 3, Tank GaugingAPI C. Chapter 4, Proving Systems meter proving

API C. Chapter 5, MeteringAPI C. Chapter 6, Metering AssembliesAPI C. Chapter 7, Temperature DeterminationAPI C. Chapter 8, SamplingAPI C. Chapter 9, Density DeterminationAPI D. @ Marine TransportationAPI E. @ MarketingAPI E. Publ 1612, Guidance Document for Discharging of Petroleum Distribution Terminal Effluents to Publicly Owned Treatment Works

API E. Publ 1638, Waste Management Practices for Petroleum Marketing FacilitiesAPI F. @ Refining

API F.01 @ Inspection of Refining EquipmentAPI F.01 API 510 Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair & Alteration Rating and rerating qualificatins required

API F.01 API 570 Piping Inspection Code: Inspection, Repair, Alteration & Rerating of In-Service Piping SystemsAPI F.02 @ Mechanical Equipment Standards for Refinery ServiceAPI F.02 API 615, SoundControl of Mechanical Equipment for Refinery Services ??? old API610 referred to this-wg

API F.02 RP 686, Machinery Installation and Installation DesignAPI F.02 Std 610, Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry ServicesAPI F.02 Std 611, General Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry ServicesAPI F.02 Std 612, Special Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services,API F.02 Std 616, Gas Turbines for the Petroleum, Chemical and Gas Industry ServicesAPI F.02 Std 617, Centrifugal Compressors for Petroleum, Chemical and Gas Industry ServicesAPI F.02 Std 618, Reciprocating Compressors for Petroleum, Chemical and Gas Industry ServicesAPI F.02API F.02API F.02 Std 674, Positive Displacement Pumps—Reciprocating,API F.02 Std 675, Positive Displacement Pumps—Controlled VolumeAPI F.02 Std 676, Positive Displacement Pumps—RotaryAPI F.02 Std 681, Liquid Ring Vacuum Pumps and CompressorsAPI F.02 Std 682, Shaft Sealing Systems for Centrifugal and Rotary PumpsAPI F.02 Std 685, Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry Services Mag drive and canned pumps

API F.03 @ Storage TanksAPI F.04 @ Pressure Relieving Systems for Refinery ServiceAPI F.04 RP520 - Sizing, Selection & Installation of Pressure Relieving Devices in Refineries, Part II (Installation) Part II, 1994 - InstallationAPI F.04 RP520 - Sizing, Selection & Installation of Pressure Relieving Devices in Refineries, Part II (Installation) Also, ASME Sec VIII, B &PV Code

API F.04 RP521 - Guide for Pressure-Relieving & Depressuring Systems Flare Network dP Calcs?API F.04 RP576 - Inspection of Pressure Relieving DevicesAPI F.04 Std 2000, Venting Atmospheric and Low-Pressure Storage Tanks: Nonrefrigerated and RefrigeratedAPI F.04 Std 526, Flanged Steel Pressure Relief ValvesAPI F.04 Std 527, Seat Tightness of Pressure Relief ValvesAPI F.05 @ Piping Component StandardsAPI F.05 API 574 Inspection Practices for Piping System ComponentsAPI F.05 RP 578, Material Verification Program for New and Existing Alloy Piping Systems Also ASME B31.3 and API 570, not CS

API F.05 RP 591, User Acceptance of Refinery Valves,API F.05 Std 589, Fire Test for Evaluation of Valve Stem PackingAPI F.05 Std 594, Check Valves: Wafer, Wafer-Lug and Double Flanged TypeAPI F.05 Std 598, Valve Inspection and TestingAPI F.05 Std 599, Metal Plug Valves—Flanged and Welding Ends,API F.05 Std 600, Steel Gate Valves—Flanged and Butt-Welding Ends, Bolted and Pressure Seal BonnetsAPI F.05 Std 602, Compact Steel Gate Valves—Flanged, Threaded, Welding, and Extended Body EndsAPI F.05 Std 603, Class 150, Cast, Corrosion-Resistant, Flanged-End Gate ValvesAPI F.05 Std 607, Fire Test for Soft-Seated Quarter-Turn ValvesAPI F.05 Std 608, Metal Ball Valves—Flanged, Threaded and Butt-Welding EndsAPI F.05 Std 609, Butterfly Valves: Double Flanged, Lug- and Wafer-TypeAPI F.06 @ Electrical Installations and Equipment

2001Cost

Std 619, Rotary-Type Positive Displacement Compressors for Petroleum, Chemical, and Gas Industry Services

Std 672, Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services

Process Engineers' Codes & Standards - Prelminary

Publisher Code or Standard Comments 2001Cost

API F.06API F.06API F.06 Std 541, Form-Wound Squirrel-Cage Induction Motors—250 Horsepower and LargerAPI F.07 @ Heat Transfer Equipment Standards for Refinery ServiceAPI F.07 Publ 534, Heat Recovery Steam GeneratorsAPI F.07 Publ 535, Burners for Fired Heaters in General Refinery ServicesAPI F.07 RP 531M, Measurement of Noise from Fired Process HeatersAPI F.07 RP 536, Post Combustion NOx Control for Equipment in General Refinery ServicesAPI F.07 RP 573, Inspection of Fired Boilers and HeatersAPI F.07 Std 530, Calculation of Heater Tube Thickness in Petroleum RefineriesAPI F.07 Std 560, Fired Heaters for General Refinery ServicesAPI F.07 Std 660, Shell-and-Tube Heat Exchangers for General Refinery Services particularly flating head andr U-tubes

API F.07 Std 661, Air-Cooled Heat Exchangers for General Refinery ServiceAPI F.07API F.07 Std 662, Plate Heat Exchangers for General Refinery ServicesAPI F.08 @ Instrumentation and Control ManualsAPI F.08 API 555, Process AnalyzersAPI F.08 RP 551, Process Measurement Instrumentation Installation procedures for common equip

API F.08 RP 552, Transmission Systems Re electroinic and pneumatic controls

API F.08 RP 553, Refinery Control ValvesAPI F.08 RP 554, Process Instrumentation and Control Not a procurment spec

API F.08 RP 556, Fired Heaters & Steam GeneratorsAPI F.08 RP 557, Guide to Advanced Control Systems Implementation & owenership, 2000, 1 ed

API F.09 @ Technical Data Book Petroleum Refining Prpoerties data for simulations

API F.10 @ Characterization and Thermodynamics (of petroleum fractions)API F.11 @ Material Engineering PublicationsAPI F.11 Publ 935, Thermal Conductivity Measurement Study of Refractory CastablesAPI F.11 Publ 939, Research Report on Characterization and Monitoring of Cracking in Wet H2 S ServiceAPI F.11 Publ 946, The Effect of Outgassing Cycles on the Hydrogen Content in Petrochemical Reactor-Vessel Steels

API F.11 Publ 950, Survey of Construction Materials and Corrosion in Sour Water StrippersAPI F.11API F.11 RP 936, Refractory Installation Quality Control GuidelinesAPI F.11API F.11 RP 945, Avoiding Environmental Cracking in Amine UnitsAPI F.12 @ Petroleum Products and Petroleum Product SurveysAPI F.12 Publ 4261, Alcohols and Ethers: A Technical Assessment of Their Application as Fuels and Fuel ComponentsAPI F.12 Std 1512, Petroleum Test Laboratory Accreditation ProgramAPI F.13 @ Health, Environment and SafetyAPI F.13 Publ 421, Management of Water Discharges: Design and Operation of Oil-Water SeparatorsAPI F.13API F.13API F.13 Publ 958, Pilot Studies on the Toxicity of Effluents from Conventional and Carbon Enhanced Treatment of Refinery Wastewater-Phase III

API F.13 RP 751, Safe Operation of Hydrofluoric Acid Alkylation UnitsAPI F.14 @ Market Data and StatisticsAPI G. @ Safety and Fire Protection

API G.01 @ PublicationsAPI G.01 Pub 2378, 1999 Summary of Occupational Injuries, Illnesses and Fatalities in the Petroleum IndustryAPI G.01 Publ 2009, Safe Welding and Cutting Practices in Refineries, Gasoline Plants, and Petrochemical PlantsAPI G.01 Publ 2028, Flame Arresters in Piping SystemsAPI G.01 Publ 2030, Application of Water Spray Systems for Fire Protection in the Petroleum IndustryAPI G.01 Publ 2201, Procedures for Welding or Hot Tapping on Equipment in ServiceAPI G.01 Publ 2214, Spark Ignition Properties of Hand ToolsAPI G.01 Publ 2216, Ignition Risk of Hydrocarbon Vapors by Hot Surfaces in the Open AirAPI G.01 Publ 2217A, Guidelines for Work in Inert Confined Spaces in the Petroleum IndustryAPI G.01 Publ 2219, Safe Operation of Vacuum Trucks in Petroleum ServiceAPI G.01API G.01API G.01API G.01 RP 2001, Fire Protection in RefineriesAPI G.01 RP 2003, Protection Against Ignitions Arising Out of Static, Lightning, and Stray CurrentsAPI G.01 RP 2210, Flame Arresters for Vents of Tanks Storing Petroleum ProductsAPI G.01 RP 2220, Improving Owner and Contractor Safety PerformanceAPI G.01 RP 2221, Manager’s Guide to Implementing a Contractor Safety ProgramAPI G.01 RP 750, Management of Process HazardsAPI G.01API G.02 @ Storage Tank Safety StandardsAPI G.02API G.02 Publ 2021A, Interim Study—Prevention and Suppression of Fires in Large Aboveground Atmospheric Storage Tanks

API G.02 Publ 334, A Guide to Leak Detection for Aboveground Storage TanksAPI G.02 RP 2350, Overfill Protection for Storage Tanks in Petroleum FacilitiesAPI G.02 Std 2015, Safe Entry and Cleaning of Petroleum Storage Tanks

API H. @ Storage TanksAPI H. Air Emissions from Aboveground Storage Tanks ManualAPI H. Bull 2521, Use of Pressure-Vacuum Vent Valves for Atmospheric LossAPI H. Chapter 19.1, Evaporative Loss From Fixed Roof TanksAPI H. Chapter 19.1A, Evaporation Loss from Low-Pressure TanksAPI H. Chapter 19.4, Recommended Practice for Speciation of Evaporative LossesAPI H.

RP 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2RP 505, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1 and Zone 2

Std 662, Plate Heat Exchanger Specification Sheets in Electronic Format, Plate Heat Exchangers for General Refinery Services

RP 934, Materials and Fabrication Requirement for 2-1/4Cr-1MO & 3Cr-1Mo Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hydrogen Service

RP 941, Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants

Publ 422, Groundwater Protection Programs for Petroleum Refining and Storage Facilities: A Guidance Document

Publ 800, Literature Survey: Subsurface and Groundwater Protection Related to Petroleum Refinery Operations

Publ 2510A, Fire Protection Considerations for the Design and Operation of Liquefied Petroleum Gas (LPG) Storage FacilitiesPubl 760, Model Risk Management Plan Guidance for Petroleum Refineries—Guidance for Complying with EPA’s RMP Rule (40 Code of Federal Regulations 68),Publ 770, A Manager’s Guide to Reducing Human Errors; Improving Human Preformance in the Process Industries

RP 752, Management of Hazards Associated With Location of Process Plant Buildings, CMA Manager’s Guide

Publ 2021, Fighting Fires In and Around Flammable and Combustible Liquid Atmospheric Petroleum Storage Tanks

Publ 2557, Vapor Collection and Control Operations for Storage and Transfer Operations in the Petroleum Industry

Process Engineers' Codes & Standards - Prelminary

Publisher Code or Standard Comments 2001Cost

API I. @ ValvesAPI I. RP 591, User Acceptance of Refinery Valves,API I. Std 594, Check Valves: Wafer, Wafer-Lug and Double Flanged TypeAPI I. Std 598, Valve Inspection and TestingAPI J. @ Industry TrainingAPI J. Publ 1200E, Electronic Curriculums Manager for Federally Mandated Training and InformationAPI K. @ Health and Environmental Issues

API K.01 @ Air ResearchAPI K.01 Publ 335, Refinery MACT Workshop Manual Maximum achievable control technology

API K.02 @ Environment and Safety DataAPI K.03 @ Human Health Related ResearchAPI K.04 @ Natural Resource Damage AssessmentAPI K.05 @ Pollution PreventionAPI K.05API K.05 Publ 302, Waste Minimization in the Petroleum Industry: A Compendium of PracticesAPI K.06 @ Soil and Groundwater ResearchAPI K.07 @ Environmental Stewardship Program PublicationsAPI K.08 @ Storage Tank ResearchAPI K.09 @ Surface Water ResearchAPI K.09 DR 351, Proceedings: Workshop to Identify Promising Technologies for the Treatment of Produced Water Toxicity Offshore exploration

API K.09 Publ 4602, Minimization, Handling, Treatment and Disposal of Petroleum Products Terminal WastewatersAPI K.09 Publ 4606, Source Control and Treatment of Contaminants Found in Petroleum Product Terminal Tank Bottoms

API K.09 Publ 4610, Critical Review of Draft EPA Guidance on Assessment and Control of Bioconcentratable Contaminants in Surface Waters

API K.09 Publ 4633, Barium in Produced Water: Fate and Effects in the Marine EnvironmentAPI K.09 Publ 4663, Remediation of Salt-Affected Soils at Oil and Gas Production FacilitiesAPI K.09 Publ 4666, The Toxicity of Common Ions to Freshwater and Marine OrganismsAPI K.09 Publ 4676, Arsenic: Chemistry, Fate, Toxicity, and Wastewater Treatment OptionsAPI K.09 Publ 4688, Temporary Treatment Options for Petroleum Distribution Terminal WastewatersAPI K.09 Publ 4694, Laboratory Analysis of Petroleum Industry WastewatersAPI K.09 Publ 4695, Understanding and Preparing Applications for Petroleum Facility NPDES Discharge Permits National pllutant discharge elimination system (EPA)

API K.09API K.10 @ Waste Research

API L. @ Subscriptions and Information Technology ProductsAPI M. @ Policy and Economic StudiesAPI N. @ Public Affairs and InformationAPI O. @ Out of Print PublicationsASA

ASME A112 "Plumbing, flor and roof drains" etcASME A120.1 Safety Requirements for Powered Platforms for Buidling MaintenanceASME A13.1 Scheme for the Identification of Piping Systems (Identifying piping contents & hazards therof, etc)ASME A17 "Elevators & Escalators" etcASME A18 Safety Standard for Platform Lifts & Stairway ChairliftsASME A90 .1 Safety Standard for Belt ManliftsASME AG-1 Code on Nuclear Air & Gas TreatmentASME B1 "Screw Threads" etcASME B107 "Hammers and other tools" etcASME B133 .4 Gas Turbine Control & Protection SystemsASMEASME B133.11 Procurement Standard for Gas Turbine Preparation for Shipping & InstallationASME B133.16 Procurement Standard for Gas Turbine Marine ApplicationsASME B133.2 Procurement Standard for Gas Turbine Maintenance & SafetyASME B133.3 Procurement Standard for Gas Turbine Auxiliary EquipmentASME B133.7M Gas Turbine FuelsASME B133.8 Gas Turbine Installation Sound EmissionsASME B133.9 Measurement of Exhaust Emissions from Stationary Gas Turbine EnginesASME B15 .1 Safety Standard for Mechanical Power Transmission ApparatusASME B16 Fittings, flanges and gas valves (eg: AMSE B16.34 - Control valves?)ASME B17 Keys & KeyseatsASME B18 Fasteners (Rivets, nuts, bolts, etc)ASME B19 Safety Standard for Air Compressor Systems & Compressors for Process IndustriesASME B20 Safety Standard for Conveyors & Related EquipmentASME B27 Retaining RingsASME B29 "Chains & Sprockets" etcASME B30 Lifting DevicesASME B31 Codes for Pressure Piping Also adopted by CSA

ASME B31.1 Power Piping (Power Boilers & Auxiliaries >15 psig, or, water >160 psig or 250F) US$195

ASME B31.11 Slurry Transportation Piping SystemsASME B31.2 Fuel Gas Piping Steam & industrial buildings

ASME B31.3 Process Piping (was previously called Petroleum Refinery Piping) US$255

ASME B31.4 Pipline Transportation Systems for Liquid Hydrocarbons & Other Liquids X country

ASME B31.5 Refrigeration Piping & Heat Transfer ComponentsASME B31.6 Chemical Plant Al fluids in chemical plant

ASME B31.7 NuclearASME B31.8 Gas Tranmission & Distribution Piping Systems CSA Z184

ASME B31.9 Building ServicesASME B32 "Wire & Products Other than Pipe" etcASME B36.10M Welded & Seamless Wrought Steel PipeASME B36.19M Stainless Steel Pipe

Publ 300, The Generation and Management of Waste and Secondary Materials in the Petroleum Refining Industry

Publ 4698, A Review of Technologies to Measure the Oil and Grease Content of Produced Water from Offshore Oil and Gas Production Operations

B133.10 Procurement Standard for Gas Turbine Information to be Supplied by User and Manufacturer

Process Engineers' Codes & Standards - Prelminary

Publisher Code or Standard Comments 2001Cost

ASME B4 "Tolerances, Limits and Fits" etcASME B40 "Thermomoters, seals, snubbers, limiter valves" etcASME B46.1 Surface TextureASME B47.1 Gage BlanksASME B5 "Machine Tools" etcASME B56 "Industrial trucks, forklifts" etcASME B73.1M Specification for Horizontal End Suction Centrifugal Pumps for Chemical ProcessASME B73.2M Specification for Vertical In-Line Centrifugal Pumps for Chemical ProcessASME B73.3M Specification for Sealless Horizontal End Suction Centrifugal Pumps for Chemical ProcessASMEASME B89 "General Dimensional Measurement" etcASME B89 Power Boilers Section (betz video tape)ASME B94 "Dies & Cutting Tools" etcASME B96.1 Welded Aluminum-Alloy Storage TanksASME BPE Bioprocessing EquipmentASME BPVC Addenda Annual additions and revisions

ASME BPVC Code Cases Verifies code intent, provide urgent rules

ASME BPVC InterpretationsASME BPVC Sec I Rules for Construction of Power Boilers 1998? US$225

ASME BPVC Sec II Materials, Parts A,B,C,DASME BPVC Sec III Subsection NCA, Div 1,2,3ASME BPVC Sec IV Rules for Construction of Heating BoilersASME BPVC Sec IX Welding and Brazing QualificationsASME BPVC Sec V Nondestructive ExaminationASME BPVC Sec VI Recommended Rules for the Care & Operation of Heating BoilersASME BPVC Sec VII Recommended Rules for the Care & Operation of Power BoilersASME BPVC Sec VIII Rules for Construction of Pressure Vessels, Div 1,2,3ASME BPVC Sec X Fiber-Reinforced Plastic Pressure VesselsASME CSD Manufacturer's Installing Contractor's Reports for ASMEASME CSD-1 Control & Safety Devices for Automatically Fired BoilersASME FAP "QA Program … Fasteners" etcASME HPS High Pressure Systems Augments BPVC and B31.1

ASME HST Air Chain Hoists, etcASME MFC "Measurement of Fluid Flow in Pipes", etc (eg: ASME MFC-3M)ASME MH1 "Pallets"ASME N278 Self-Operated and Power-Operated Safety-Related Valves Functional Specificatoin Standard For application in nuclear power plants

ASME N509 Nuclear Power Plant Air Cleaning Units & ComponentsASME N510 Testing of Nuclear Air Treatment SystemsASME N626 Qualifications & Duties of Specialized Professional Engineers Certifications for owner, etc

ASME NOG "Gantry Cranes"ASME NQA "QA for nuclear facilities" etcASME NUM "Cranes, Monorails" etcASME OM "Standards, Guides and Code for the Operation & Maintenance of Nuclear Power Plants", etcASME PALD Safety Standard for Portable Automotive Lifting DevicesASME PTC 1 General InstructionsASME PTC 10 Test Code on Compressors & ExhaustersASME PTC 11 FansASME PTC 12.1 Closed Feedwater HeatersASME PTC 12.2 Steam Surface CondensersASME PTC 12.3 DeaeratorsASME PTC 18 Hydraulic Turbines ASME PTC 18.1 Pumping Mode of Pump/TurbinesASME PTC 19.1 Measurement UncertaintyASME PTC 19.10 Flue and Exhaust Gas AnalysisASME PTC 19.11 Steam & Water Sampling, Conditioning and Analysis in the Power CycleASME PTC 19.2 Pressure MeasurementASME PTC 19.22 Digital Systems TechniquesASME PTC 19.23 Guidance Manual for Model TestingASME PTC 19.5 Application Part II of Fluid Meters: Interim Supplement to PTC 19.5 on Instruments and Apparatus ASME PTC 19.5.1 Weighing ScalesASME PTC 19.7 Measurement of Shaft PowerASME PTC 19.8 Measurement of Indicated PowerASME PTC 20.1 Speed and Load-Governing Systems for Steam turbine-Generator UnitsASME PTC 20.2 Overspeed Trip Systems of Steam Turbine-Generator UnitsASME PTC 20.3 Pressure Control Systems Used on Steam Turbine Generator UnitsASME PTC 21 Particulate Matter Collection EquipmentASME PTC 22 Performance Test Code on Gas TurbinesASME PTC 23 Atmospheric Water Cooling Equipment Forced and natural draft cooling towers.

ASME PTC 24 EjectorsASME PTC 25 Pressure Relief DevicesASME PTC 28 Determining the Properties of Fine Particulate MatterASME PTC 29 Speed Governing Systems for Hydraulic Turbine Generator UnitsASME PTC 3.1 Diesel & Burner FuelsASME PTC 3.2 Solid FuelsASME PTC 3.3 Gaseous FuelsASME PTC 30 Air Cooled Exchangers US$95.00

ASME PTC 31 Ion Exchange EquipmentASME PTC 32.1 Nuclear Steam Supply Systems

B73.5M Thermoplastic/Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for Chemical Process

Written replies to inquiries, typically semi-annual

Process Engineers' Codes & Standards - Prelminary

Publisher Code or Standard Comments 2001Cost

ASME PTC 33 Large Incinerators Code & Appendix PackageASME PTC 33A Abbreviated Incinerator Efficiency TestASME PTC 36 Measurement of Industrial SoundASME PTC 38 Determining the Concentration of Particulate Matter in a Gas StreamASME PTC 39.1 Condensate Removal Devices for Steam SystemsASME PTC 4 Fired Steam GeneratorsASME PTC 4.2 Coal PullverizersASME PTC 4.3 Air HeatersASME PTC 4.4 Gas Turbine heat Recovery Steam GeneratorsASME PTC 40 Flue Gas Desulfurization UnitsASME PTC 46 Overall Plant PerformanceASME PTC 5 Reciprocating Steam EnginesASME PTC 6 & 6A Test Code on Steam TurbinesASME PTC 6S Procedures for Routine Performance Test of Steam TurbinesASME PTC 7.1 Displacement PumpsASME PTC 8.2 Centrifugal PumpsASME PTC 9 Displacement Compressors, Vacuum Pumps & BlowersASME PTC PM Performance Monitoring Guidelines for Steam Power PlantsASME PTC12.4 Moisture Separator ReheatersASME PVHO-1 Safety Standard for Pressure Vessels for Human Occupancy - eg: submersibles, air locks, etcASME QAI Qualifications for Authorized Inspection Nuclear

ASME QEI Standard for the Qualification of Elevator InspectorsASME QHO Standard Qualification and Certification of Hazardous Waste Incinerator OperatorASME QME Qualification of Active Mechanical Equipment Nuclear

ASME QMO Standard for the Qualification and Certification of Medical Waste Incinerator Operators ASME QRO Standard for the Qualification & Certification of Resource Recovery Facility OperatorsASME QTC GT PowerPlant TestCode?ASME RTP-1 Reinforced Thermoset Plastic Corrosion Resistant EquipmentASME Sec XI Rules for Inservice Inspection of Nuclear Power BPVC Plant ComponentsASMEASME STS-1-2000 Steel StacksASME Y14 Acronyms, Mechanical Engineering Drawing Practices, etcASME Y32 Graphic Symbols ASME Y32.1 Graphic Symbols for Process Flow Diagrams in Petroleum and Chemical Industries ASME Y32.10 Graphic Symbols For Fluid Power DiagramsASMEASME Y32.2.4 Graphic Symbols for Heating, Ventilating and Air ConditioningASME Y32.2.6 Graphics Symbols for Heat-Power ApparatusASME Y32.4 Graphic Symbols for Plumbing Fixtures for Diagrams Used in Architecture & Building ConstructionASTMCCME National Emission Guidelines for Stationary Combustion Turbines - Canadian Council of Ministers of the Environment (CCME)

CSA B51.95 Boiler, Pressure Vessel, and Pressure Piping Code ABSA

CSA B51.95 Part 1, Including Appendix I, Automotvie Propane Vessel Standards ABSA

CSA B51.95 Part 2, High Pressure Cylinders for the On-Board Storage of Natural Gas… ABSA

CSA B51.95 Part 3, Requirements for CNG Refuelding Stqation Presure Piping Systems and Ground Storage… ABSA

CSA B52.95 Mechanical Refrigeration Code ABSA

CSA Z662-1994 Oil and Gas Pipeline Systems ABSA

DOT Regulations … Governing the Transportation of Haaardous Materials in Tank Motor Vehicles ABSA

EPAEPRIHEIISA? S77.14.01 Fossill..ST By Pass SystemsMSS Std Practice SP-25 Standard Marking System for Valves, Fittings, Flanges and Unions ABSA

NACE @ NACE Book of Standards--Hard Copy NACE RP0182-95 Initial Conditioning of Cooling Water Equipment NACE RP0189-95 On-Line Monitoring of Cooling Waters NACENACENACENACE 8/SSPC-SP 14 Industrial Blast Cleaning NACE 7/SSPC VIS 4 Guide and Visual Reference Photographs for Steel Cleaned by Water Jetting NACENACE NACE/SSPC Joint Standards Package (NACE No 1,2,3,4,5,6,8) NACE RP0100-2000 Cathodic Protection of Prestressed Concrete Cylinder Pipelines NACE RP0169-96 Control of External Corrosion on Underground or Submerged Metallic Piping Systems NACENACE RP0176-94 Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production NACENACE RP0181-94 Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment NACE RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms NACE RP0196-96 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks NACE RP0198-98 The Control of Corrosion Under Thermal Insulation and Fireproofing Materials--A Systems Approach NACE RP0273-2001 Handling and Proper Usage of Inhibited Oilfield Acids NACE RP0288-94 Inspection of Linings on Steel and Concrete NACE RP0292-98 Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment NACENACE

SI ASME Orientation and Guide for use of SI-1 (Metric) Units-Ninth Edition

Y32.2.3 Graphic Symbols for Pipe Fittings, Valves and Piping

API RP 1632 Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems -- 1996 Edition MR0175-2001 Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment 5/SSPC-SP 12 Surface Preparation of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating

9/SSPC VIS 5 Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning

RP0170-97 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment

RP0177-2000 Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems

RP0294-94 Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures RP0296-2000 Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments

Process Engineers' Codes & Standards - Prelminary

Publisher Code or Standard Comments 2001Cost

NACE RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion Service NACE RP0387-99 Metallurgical and Inspection Requirements for Cast Sacrificial Anodes for Offshore Applications NACE RP0375-99 Wax Coating Systems for Underground Piping Systems NACE RP0388-95 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks NACENACE RP0392-2001 Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems NACENACENACENACENACENACE RP0497-97 Field Corrosion Evaluation Using Metallic Test Specimens NACE RP0575-01 Internal Cathodic Protection Systems in Oil-Treating Vessels NACE RP0572-2001 Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds NACE RP0590-96 Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking NACE RP0775-99 Preparation and Installation of Corrosion Coupons and Interpretation of Test Data in Oilfield Operations NACE SPECIALTY PACKAGE: Sulfide Stress Cracking in Oilfield Equipment NACE SPECIALTY PACKAGE: Cathodic Protection of Pipelines/Tanks NACE SPECIALTY PACKAGE: Corrosion Control of Equipment Used in Offshore Operations NACE TM0172-2001 Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines NACE TM0173-99 Methods for Determining Water Quality for Subsurface Injection Using Membrane Filters NACE TM0194-94 Field Monitoring of Bacterial Growth in Oilfield Systems NACENACENACENACE TM0286-2001 Cooling Water Test Unit Incorporating Heat Transfer Surfaces NACENACE TM0397-97 Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers NACE TM0399-99 Test Method for Phosphonate in Brine NACE TM0498-98 Standard Test Method for Measuring the Carburization of Alloys for Ethylene Cracking Furnace Tubes

NEMANFPA NFPA 11 Standard on Foam Extinguishing SystemsNFPA NFPA 12 Standard for Carbon Dioxide Extinguishing SystemsNFPA NFPA 13 Standard for the Installation of Sprinkler SystemsNFPA NFPA 14 Standard for the Installtionof Standpipe and Hose SystemsNFPA NFPA 17 Standard for Dry Chemical Extinguishing SystemsNFPA NFPA 20 Standard for the Installation of Centrifugal Fire PumpsNFPA NFPA 22 Standard for the Installatin of Water Tanks for Private Fire ProtectionNFPA NFPA 24 Standard for Outside ProtectionNFPA NFPA 58 Standard for the Storage and Handling of Liquefied Petroleum Gases ABSA

OSHATEMA Standards of Tubular Exchanger Manufacturers Association ABSA

Standard References and HandbooksISA Handbook of Control ValvesDow Chemical Gas Conditioning Fact BookNFPA Handbook of Fire ProtectionHandbook of Industrial Loss Prevention, Factory Mutual Engineering CorpASME Handbook on Water Technology for Thermal Power systems, 1989Standard Handbook of Power Plant Engineering, 1989

Abbreviations:ASME = American Society of Mechanical Engineers

ASTM = American Standard Testing Materials?HEI = Heat Exchange InstituteTEMA = Thermal Exchanger Manufacturers Association?API = American Petroleum InstituteNACE International = National Association of Corrosion Engineers International

RP0391-2001 Materials for the Handling and Storage of Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures

RP0394-94 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating RP0399-99 Plant-Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control RP0472-2000 Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments RP0475-98 Selection of Metallic Materials to Be Used in All Phases of Water Handling for Injection into Oil-Bearing Formations RP0487-2000 Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection

TM0197-97 Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfate from Solution (for Oil & Gas Prod. Systems) TM0198-98 Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service TM0199-99 Standard Test Method for Measuring Deposit Mass Loading (Deposit Weight Density) Values for Boiler Tubes by the Glass-Bead-Blasting Technique

TM0374-2001 Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil & Gas Prod. Systems)

ANSI = American National Standards Institute (works with over 175 organizations to approve their standards) (eg: ANSI has approved many API standards)

Process Engineers' Codes & Standards - Prelminary

Publisher Code or Standard Comments 2001Cost

ISA = Instrument Society of America? International Society for Measurement and Control?CSA = Canadian Standards AssociationPTC = Performance Test CodeOSHA = Occupational Safety and Health AdministrationASME "Codes and Standards by Designator Code"BPVC = AMSE Boiler & Pressure Vessel CodeASA = American Standards Association (fittings, plumbing etc)AWWAAWS (American Welding Society)ABSA = Alberta Boilers Safety Association

API 610, 1984 said there exists API 5L specification for line pipe ??? Find out about that...