· web viewastm d 570 - standard test method for water absorption of plastics. astm d 638 -...

SECTION 15416RESTROOM LAVATORY EQUIPMENT

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2003 - 2015 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Lavatories.

B. Countertops with integral sinks.

C. Washfountains.

D. Faucets.

E. Showers.

F. Accessories.

1.2 RELATED SECTIONS

A. Section 15145 - Plumbing Piping.

B. Section 15430 - Plumbing Equipment.

C. Section 16150 - Wiring Connections: Electric connections to sensor valves and faucets specified by this section.

D. Section 06400 - Architectural Woodwork: Casework and cabinets.

E. Section 07900 - Joint Sealers.

F. Section 10180 - Toilet Accessories: Soap Dispensers.

1.3 REFERENCES

A. ANSI Z 124.3 - Plastic Lavatories.

B. ANSI Z 124.6 - Plastic Sinks.

C. ANSI/ASME A112.18.1 - American National Standard for Plumbing Fixture Fittings;.

D. ANSI/ICPA SS-1 - Performance Standard for Solid Surface Materials.

15416-1

E. ADA/ANSI A117.1ANSI/ASME A112.18.1 - American National Standard for Plumbing Fixture Fittings.

F. CAN/CSA B 45 - Plumbing Fixtures.

G. CAN/CSA B 125 - Plumbing Fixture Fittings.

H. ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.

I. ASTM D 570 - Standard Test Method for Water Absorption of Plastics.

J. ASTM D 638 - Standard Test Method for Tensile Properties of Plastics.

K. ASTM D 696 - Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30 degrees C and 30 degrees C With a Vitreous Silica Dilatometer.

L. ASTM D 785 - Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials.

1.4 SUBMITTALS

A. Submit under provisions of Section 01300.

B. Product Data: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

C. Shop Drawings: Submit plans, elevations, and detail section; indicate overall dimensions, material thickness, location and size of product, and mounting provisions and methods.

D. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

E. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

F. Manufacturer's Certificates: Certify products meet or exceed specified requirements.

1.5 QUALITY ASSURANCE

A. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.1. Finish areas designated by Architect.2. Do not proceed with remaining work until workmanship, color, and sheen are

approved by Architect.3. Refinish mock-up area as required to produce acceptable work.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Store products in manufacturer's unopened packaging until ready for installation.

B. Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.

1.7 PROJECT CONDITIONS

15416-2

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Bradley Corp., which is located at: W142 N9101 Fountain Blvd.; Menomonee Falls, WI 53051; Toll Free Tel: 800-BRADLEY; Tel: 262-251-6000; Fax: 262-251-5817; Email:request info ([email protected]); Web:www.bradleycorp.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.2 LAVATORIES

A. Bowls and Countertops General:1. Engineered Stone: Evero engineered natural quartz, molded engineered stone

material consisting of natural quartz, granite, and other minerals in a matrix of thermoset acrylic modified bio-based polyester resin, certified by approved independent testing agency as complying with ANSI/ICPA SS-1-2001, ANSI Z124.3, and ANSI Z124.6, with the following minimum properties:a. Thickness: 1/2 inch (13 mm).b. Moisture Absorption: 0.065 percent in 24 hours, per ASTM D 570.c. Flexural Strength: 3267 psi (22.5 MPa), minimum, per ASTM D 790.d. Compressive Strength: 11,500 psi (79 MPa), minimum, per ASTM C 170.e. Hardness: 6 - 7 Mohs Scale, per ASTM D 785.f. Surface Burning Characteristics: Smoke developed, less than 450; flame

spread, less than 25, per ASTM E 84.2. Solid Surfacing Material: Terreon solid surface polyester resin material; resistant to

chemicals, stains, burns and impact; NAHB certified and complying with ANSI Z124.3, Z124.6, and ANSI/ICPA SS-1.a. Thickness: 1/2 inch (13 mm).b. Liquid Absorption: 0.025 percent in 24 hours, when tested in accordance with

ASTM D 570.c. Tensile Strength: 5000 psi (34 MPa), when tested in accordance with ASTM D

638.d. Thermal Expansion: 2.30, when tested in accordance with ASTM D 696.e. Hardness: 55-60, when tested in accordance with ASTM D 785.f. Fire Resistance: Class 1, when tested in accordance with ASTM E 84.

B. Multiple User Lavatories: Bradley Verge Lavatory System, Model LVRD; Wall-mounted rectilinear, level-surface lavatory deck with rounded edges, formed from molded engineered stone material with integral elongated basin, with stainless steel enclosed pedestal cabinet.1. Users: One, 30 inch (762 mm) long by 19-1/2 inches (495 mm) deep.2. Users: Two, 60 inch (1524 mm) long by 19-1/2 inches (495 mm) deep..3. Users: Three, 90 inch (2286 mm) long by 19-1/2 inches (495 mm) deep.4. Faucet:

a. Bradley, Aerada 1100 Series High Arc, sensor-operated, high profile metering faucet with infrared control and external temperature control, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.

b. Bradley, CAP-DCA Series, capacitive-sensor-operated faucet with remote tempering control, vandal-resistant accessible faucet meeting ASME

15416-3

A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.c. Bradley, IR-DCD Series, IR sensor-operated faucet with infrared control and

external tempering control, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.

d. As selected by Architect.5. Bowl Color: ______________.6. Bowl Color: As selected by the Architect from the manufacturer's full line of colors.7. Mounting: Rim Mounting Height:

a. 33.5 inches (859 mm).b. 31.5 inches (800 mm).c. 30.5 inches (775 mm).d. 29.5 inches (749 mm).e. As indicated.

8. Sensor Soap Dispenser: Model 6315-KT0000, deck-mounted, chrome-plated plastic, with LED battery and soap level indicators, 27 oz. (798 mL) capacity bottle. Provide with:a. Battery box and batteries.b. Single dispenser 120VAC powerpack.c. 4 dispenser 120VAC powerpack.

9. Soap Dispenser: Model 6324, deck-mounted with 4 inch (102 mm) spout. Provide with:a. 16 oz. (473 mL) plastic globe.b. 16 oz. (473 mL) stainless steel globe.c. 32 oz. (946 mL) plastic] globe.

10. Soap Dispenser: Model 6334, Deck-mounted, 16 oz. (473 mL) plastic globe, with 3.5 inch (88.90 mm) spout.

11. Water Supply: Thermostatic mixing assembly for hot and cold supplies.12. Water Supply: Single tempered line.

C. Multiple User Lavatories: Bradley Verge Lavatory System, Model LVGD; Wall-mounted forward curved lavatory deck with rounded edges, formed from molded engineered stone material with integral elongated basin, with stainless steel enclosed pedestal cabinet.1. Users: One, 30 inch (762 mm) long by 19-1/2 inches (495 mm) deep.2. Users: Two, 60 inch (1524 mm) long by 19-1/2 inches (495 mm) deep..3. Users: Three, 90 inch (2286 mm) long by 19-1/2 inches (495 mm) deep.4. Faucet:


b. Bradley, CAP-DCA Series, capacitive-sensor-operated faucet with remote tempering control, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.

c. Bradley, IR-DCD Series, IR sensor-operated faucet with infrared control and external tempering control, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.



8. Sensor Soap Dispenser: Model 6315-KT0000, deck-mounted, chrome-plated plastic,

15416-4

with LED battery and soap level indicators, 27 oz. (798 mL) capacity bottle. Provide with:a. Battery box and batteries.b. Single dispenser 120VAC powerpack.c. 4 dispenser 120VAC powerpack.




D. Multiple User Lavatories: Bradley Verge Lavatory System, Model LVLD; Wall-mounted rimless lavatory deck with sleek edges, molded from engineered stone material to create a seamless and integral elongated basin, with stainless steel enclosed pedestal cabinet.1. Users: One, 30 inch (762 mm) long by 19-1/2 inches (495 mm) deep.2. Users: Two, 60 inch (1524 mm) long by 19-1/2 inches (495 mm) deep..3. Users: Three, 90 inch (2286 mm) long by 19-1/2 inches (495 mm) deep.4. Faucet:


b. Bradley, CAP-DCA Series, capacitive-sensor-operated faucet with remote tempering control, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.

c. Bradley, IR-DCD Series, IR sensor-operated faucet with infrared control and external tempering control, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.







15416-5

E. All-In-One Lavatories: Bradley, Advocate AV Series; Soap, water and hand dryer, all-in-one design for one, two or three users; wall-mounted lavatory constructed of solid surface material with integral circular bowl, with stainless steel wall mounting cabinet and solid surface material shelf, built-in faucet, and hand dryer. Unit includes waste and supply connections to wall with stop, strainer, and check valves.1. Model AV30: Unit Length 30 inches (762 mm).2. Model AV60: Unit Length 60 inches (1524 mm).3. Model AV90: Unit Length 90 inches (2286 mm).4. Faucet: Built-in, sensor-operated, vandal-resistant low profile faucet.

a. ____________.b. As selected by Architect.

5. Hand Drier: Low energy unit integrated into lavatory deck.a. ____________.b. As selected by Architect.

6. Cabinet Construction:a. Satin stainless steel.b. Textured stainless steel.

7. Faucet Sensor Power Source:a. Low voltage power pack.

8. Soap Dispenser: Low profile electronic dispenser,9. Water Supply:

a. Single tempered line.b. Thermostatic mixing valve assembly.

10. Bowl Color: ______________.11. Bowl Color: As selected by the Architect from the manufacturer's full line of colors.12. Configuration, Left to Right:13. Lavatory, Rim Mounting Height:

a. 34 inches (864 mm).b. 31 inches (787 mm).c. 28 inches (711 mm).

F. Single User Lavatories: Bradley, Frequency; wall-mounted lavatory constructed of solid surface material with circular bowl. Unit includes waste and supply connections to wall with stop, strainer, and check valves. ADA/ABA compliant.1. Model FL-1L; single user.2. Model FL-1H; single user.3. Model FL-2L; two user, 60 by 22 inches (1524 by 559 mm).4. Model FL-2H; two user, 60 by 22 inches (1524 by 559 mm).5. Model FL-3L; three user, 90 by 22 inches (2286 by 559 mm).6. Model FL-3H; three user, 90 by 22 inches (2286 by 559 mm).7. Faucet:

a. Bradley, Aerada 1200 CS Series.b. As selected by Architect.

8. Spray Head: Independent water stream former with flow rate of 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).a. Spray Head Valve Operation: Capacitive sensing module and solenoid with

adjustable turn off delay and automatic shut-off.b. Spray Head Valve Operation: Pushbutton air valve metering with adjustable

timing.c. Spray Head Valve Operation: Light-touch, 15 second auto shutoff and solenoid

valve.9. Water Supply:

a. Single tempered line.b. Thermostatic mixing valve assembly.

10. Power Source: Battery Operated.11. Bowl Color: ______________.

15416-6

12. Bowl Color: As selected by the Architect from the manufacturer's full line of colors.

G. Multiple User ADA/ABA compliant wall-mounted Lavatory: Bradley, Express Deck Lavatory System, ELX- Series constructed of a seamless one piece rectilinear solid surface bowl with center contour and individual drains to create personal space, integral overflows. Unit includes supply kit, drain assembly with plungable 300 series stainless steel strainers, tail-piece connections and p-traps. Unit includes heavy-gage stainless steel mounting bracket, concealed by high impact polymer trap cover.1. Users: Two, 55 inch (1397 mm) long by 21-5/8 inches (549 mm) deep..2. Users: Three, 85 inch (2286 mm) long by 21-5/8 inches (549 deep.3. Backsplash:

a. Integral 2-1/2 inch (63.5 mm) coved backsplash.b. No backsplash.

4. Drain Connection:a. Chrome-plated combined waste assembly.b. Polypropylene combined waste assembly.c. Chrome-plated individual waste assembly.d. Polypropylene individual waste assembly].

5. Faucet:a. Bradley, Aerada 1200 Series CS low profile Faucet with infrared sensing

metering control meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.

b. As selected by Architect.6. Bowl Color: ______________.7. Bowl Color: As selected by the Architect from the manufacturer's full line of colors.8. Liquid Soap Dispenser Drilling:

a. Shared soap drilling.b. Personal soap drilling.



11. Water Supply:a. Single tempered line assembly.b. Thermostatic mixing valve assembly.

12. Trap enclosure Color: As selected by Architect.

H. Multiple User Lavatories: Bradley Express, SS-Series; includes waste and supply connections to wall and thermostatic mixing valve with stop, strainer, and check valves; heavy-gage stainless steel support frame; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions.1. Sprayhead: Independent water streamformer; flow rate 0.5 GPM (0.0315 cubic mm

per second); operating range 20 to 80 psi (138 to 552 kPa).2. Valve Operation: Infrared sensing module and solenoid; 2 to 3 second turn off delay;

automatic shut-off after 30 to 45 seconds continuous operation; includes 110/24 VAC plug-in transformer.

3. Valve Operation: Pushbutton air metering; factory preset at 10 seconds; field adjustable timing from 0 to 45 seconds.

4. Valve Operation: Battery operated infrared; 1 to 2 second turn off delay; automatic

15416-7

shut-off after 90 seconds continuous operation; requires six double-A alkaline batteries; includes single valve control box.

5. Valve Operation: Pushbutton Touch Time(tm) electronic metering; timing electronically controlled at 15 seconds.

6. Mounting: Wall mounted; mounting height determines Texas Accessibility Standards compliance.

7. Mounting: Wall mounted, floor supported.8. Users: Two, maximum; complete unit 50 inches (1270 mm) long by 21 inches (533

mm) wide; standard spacing on 30 inch (762 mm) centers (SS-2).9. Users: Three, maximum; complete unit 80 inches (2030 mm) long by 21 inches (533

mm) wide; standard spacing on 30 inch (762 mm) centers (SS-3).10. Bowl/Sprayhead Color: ______________.11. Bowl/Sprayhead Color: As selected by the Architect from the manufacturer's full line of

colors.12. Access Panel/Sprayhead Body Color: Gray.13. Access Panel/Sprayhead Body Color: Putty.14. Access Panel/Sprayhead Body Color: Coal.15. Pedestal: Vacuum-formed acrylic laminate.16. Soap Dispenser: Liquid soap dispenser.17. Water Supply: Thermostatic mixing assembly for hot and cold supplies.18. Water Supply: Single tempered line.

I. Single User Lavatories: Bradley Express, SS-1 Series; includes waste and supply connections to wall; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions; optional trap cover required for ADA compliance.1. Sprayhead: Independent water streamformer; flow rate 0.5 GPM (0.0315 cubic mm

per second); operating range 20 to 80 psi (138 to 552 kPa); infrared sensing module and solenoid; 2 to 3 second turn off delay; automatic shut-off after 30 to 45 seconds continuous operation; includes 110/24 VAC plug-in transformer.

2. Faucet: ____________.3. Faucet: As selected by Architect.4. Faucet Mounting: 4 inches (100 mm) on center.5. Faucet Mounting: 8 inches (203 mm) on center.6. Faucet Mounting: Single hole.7. Soap Dispenser: 16 oz (0.47 L) plastic globe, 2-1/2 inch (64 mm) spout.8. Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 2-1/2 inch (64 mm) spout.9. Soap Dispenser: 32 oz (0.95 L) plastic globe, 2-1/2 inch (64 mm) spout.10. Soap Dispenser: Drilling only; dispenser by others.11. Water Supply: Thermostatic mixing assembly for hot and cold supplies.12. Water Supply: Single tempered line.13. Water Supply: No thermostatic mixing valve.14. Bowl Color: ______________.15. Bowl Color: As selected by the Architect from the manufacturer's full line of colors.16. Mounting: Surface mounted bracket; 1 inch (25 mm) square zinc plated mild steel

structural tubing, includes locking device and leveling screws; by manufacturer.17. Mounting: In-wall carriers; by others.18. Trap Cover: Gray.19. Trap Cover: Putty.20. Trap Cover: Coal.

J. Multiple User Lavatories: Bradley Express, MG-Series; includes waste and supply connections to wall and thermostatic mixing valve with stop, strainer, and check valves; heavy-gage stainless steel support frame; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions.1. Sprayhead: Independent water streamformer; flow rate 0.5 GPM (0.0315 cubic mm

15416-8



3. Valve Operation: Pushbutton air metering; factory preset at 10 seconds; field adjustable timing from 0 to 45 seconds.

4. Valve Operation: Pushbutton Touch Time(tm) electronic metering; timing electronically controlled at 15 seconds.

5. Mounting: Wall mounted; mounting height determines Texas Accessibility Standards compliance.

6. Pedestal: Contoured front, 300 series stainless steel.7. Users: Two, maximum; complete unit 54 inches (1372 mm) long by 22 inches (559

mm) wide; standard spacing on 30 inch (762 mm) centers (MG-2).8. Users: Three, maximum; complete unit 84 inches (2134mm) long by 22 inches (559

mm) wide; standard spacing on 30 inch (762 mm) centers (MG-3).9. Bowl/Sprayhead/End Caps Color: ______________.10. Bowl/Sprayhead/End Caps Color: As selected by the Architect from the

manufacturer's full line of colors.11. Soap Dispenser: Liquid soap dispenser.12. Water Supply: Thermostatic mixing assembly for hot and cold supplies.13. Water Supply: Single tempered line.

K. Multiple User Lavatories: Bradley Express Crescent, CRS-Series; 48 inch (1219 mm) long by 26 inch (659 mm) wide bowl; includes waste and supply connections to wall and thermostatic mixing valve with stop, strainer, and check valves; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions; optional trap cover required for ADA compliance.1. Sprayhead: Independent water streamformer; flow rate 0.5 GPM (0.0315 cubic mm



3. Valve Operation: Battery operated infrared; 1 to 2 second turn off delay; automatic shut-off after 90 seconds continuous operation; requires six double-A alkaline batteries; includes single valve control box.

4. Users: Two, maximum (CRS-2).5. Users: Three, maximum (CRS-3).6. Bowl Color: ______________.7. Bowl Color: As selected by the Architect from the manufacturer's full line of colors.8. Mounting: Wall mounted; mounting height determines Texas Accessibility Standards

compliance.9. Soap Dispenser: Liquid soap dispenser.10. Water Supply: Manual mixing valve for hot and cold supplies.11. Water Supply: Thermostatic mixing assembly for hot and cold supplies.12. Water Supply: Single tempered line.13. Trap Cover: Putty.14. Trap Cover: Coal.

L. Multiple User Lavatories: Bradley Express Deck, EXD-Series; includes waste and supply connections to wall and thermostatic mixing valve with stop, strainer, and check valves; heavy-gage stainless steel support frame; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions.1. Faucet: ____________.2. Faucet: As selected by Architect.3. Faucet Mounting: 4 inches (100 mm) on center.4. Faucet Mounting: 8 inches (203 mm) on center.

15416-9

5. Faucet Mounting: Single hole.6. Mounting: Wall mounted; mounting height determines Texas Accessibility Standards

compliance.7. Users: Two, maximum; complete unit 50 inches (1270 mm) long by 21 inches (533

mm) wide; standard spacing on 30 inch (762 mm) centers (EXD-2).8. Users: Three, maximum; complete unit 80 inches (2032 mm) long by 21 inches (533

mm) wide; standard spacing on 30 inch (762 mm) centers (EXD-3).9. Bowl Color: ______________.10. Bowl Color: As selected by the Architect from the manufacturer's full line of colors.11. Access Panel Color: Gray.12. Access Panel Color: Putty.13. Access Panel Color: Coal.14. Soap Dispenser: 16 oz (0.47 L) plastic globe, 2-1/2 inch (64 mm) spout.15. Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 2-1/2 inch (64 mm) spout.16. Soap Dispenser: 32 oz (0.95 L) plastic globe, 2-1/2 inch (64 mm) spout17. Water Supply: Thermostatic mixing assembly for hot and cold supplies.18. Water Supply: Single tempered line.

M. Single User Lavatories: Bradley Terreon Imperial; single user; water overflow; ledged back; includes drain, strainer, and tailpiece; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions; trap cover required for ADA compliance.1. Faucet: ____________.2. Faucet: As selected by Architect.3. Faucet Mounting: 4 inches (100 mm) on center.4. Faucet Mounting: Single hole.5. Size: 20 inches (508 mm) long by 15 inches (381 mm) wide; not ADA compliant.6. Size: 21 inches (533 mm) long by 18 inches (457 mm) wide; ADA compliant7. Water Supply: Thermostatic mixing assembly for hot and cold supplies.8. Water Supply: Single tempered line.9. Bowl Color: ______________.10. Bowl Color: As selected by the Architect from the manufacturer's full line of colors.11. Mounting: Surface mounted bracket; 1 inch (25 mm) square zinc plated mild steel

structural tubing, includes locking device and leveling screws; by manufacturer.12. Mounting: In-wall carriers; by others.13. Provide trap cover; by others.14. Provide Offset drain with open strainer, 1-1/4 inch (32 mm) tailpiece.15. Provide P-trap.

2.3 COUNTERTOPS WITH INTEGRAL SINKS

A. Bowls and Countertops General: Terreon solid surface polyester resin material; resistant to chemicals, stains, burns and impact; NAHB certified and complying with ANSI Z124.3, Z124.6, and ANSI/ICPA SS-1.1. Thickness: 1/2 inch (13 mm).2. Liquid Absorption: 0.025 percent in 24 hours, when tested in accordance with ASTM

D 570.3. Tensile Strength: 5000 psi (34 MPa), when tested in accordance with ASTM D 638.4. Thermal Expansion: 2.30, when tested in accordance with ASTM D 696.5. Hardness: 55-60, when tested in accordance with ASTM D 785.6. Fire Resistance: Class 1, when tested in accordance with ASTM E 84.

B. Multiple Sink Countertops: Bradley Terreon Omnideck, LD-3010 Series; one user per station, multiple users possible; coved backsplash; strainer and p-trap included; designed to comply with ADA guidelines on reaches and clearances when mounted at recommended height dimensions.

15416-10

1. Faucet: ____________.2. Faucet: As selected by Architect.3. Faucet Mounting: 4 inches (100 mm) on center.4. Faucet Mounting: 8 inches (203 mm) on center.5. Faucet Mounting: Single hole.6. Faucet Mounting: No Drilling.7. Users: One; complete unit 30 inches (762 mm) long by 22 inches (559 mm) wide.8. Users: Two; complete unit 60 inches (1524 mm) long by 24 inches (610 mm) wide.9. Users: Three; complete unit 90 inches (2286 mm) long by 24 inches (610 mm) wide.10. Users: Four; complete unit 120 inches (3048 mm) long by 24 inches (610 mm) wide.11. Users: Custom; _____________.12. Bowl Size: 16 inch (406 mm) long by 13 inch (330 mm) wide oval bowl.13. Bowl Color: ____________.14. Bowl Color: As selected by Architect from manufacturer's full line of colors.15. Deck Color: ____________.16. Deck Color: As selected by Architect from manufacturer's full line of colors.17. Soap Dispenser: 16 oz (0.47 L) plastic globe, 2-1/2 inch (64 mm) spout.18. Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 2-1/2 inch (64 mm) spout.19. Soap Dispenser: 32 oz (0.95 L) plastic globe, 2-1/2 inch (64 mm) spout.20. Soap Dispenser: _____________.21. Backsplash: 3 inches (76 mm) high; length to match deck.22. Backsplash: ______________.23. Sidesplash, Left: 3 inches (76 mm) high; length to match deck.24. Sidesplash, Right: 3 inches (76 mm) high; length to match deck.25. Sidesplash, Both: 3 inches (76 mm) high; length to match deck.26. Sidesplash:________________.27. Front Apron: 3 inches (76 mm) high; length to match deck.28. Side Apron, Left: 3 inches (76 mm) high; length to match deck.29. Side Apron, Right: 3 inches (76 mm) high; length to match deck30. Side Apron, Both: 3 inches (76 mm) high; length to match deck.31. Edging: Roundover.32. Edging: Beveled.33. Mounting: Carrier sleeves.34. Mounting: Mounting brackets; heavy gage stainless steel, included.35. Mounting: Mounting brackets with Terreon strip.36. Mounting: Casework, by others.37. Mounting: _______________, by others38. Water Supply: Thermostatic mixing assembly for hot and cold supplies.39. Water Supply: Single tempered line.40. Provide chrome-plated brass p-trap.41. Provide drain assembly; includes drain, strainer, and tailpiece.

C. Two Sink Countertops: Bradley Terreon Omnideck, LD-3060 Series; two station deck with integral bowls; contoured front apron and coved 3 inch (76 mm) backsplash; strainer and p-trap included; casework provided by others; designed to comply with ADA guidelines on reaches and clearances when mounted at recommended height dimensions.1. Faucet: ____________.2. Faucet: As selected by Architect.3. Faucet Mounting: 4 inches (100 mm) on center.4. Faucet Mounting: 8 inches (203 mm) on center.5. Faucet Mounting: Single hole.6. Faucet Mounting: No Drilling.7. Configuration: Two sinks; complete unit 60 inches (1524 mm) long by 24 inches (610

mm) wide.8. Configuration: Two sinks; one waste receptacle; complete unit 75 inches (1905 mm)

long by 24 inches (610 mm) wide

15416-11

9. Configuration: Two sinks; both left and right waste receptacles; complete unit 90 inches (2286 mm) long by 24 inches (610 mm) wide.

10. Bowl Size: 16 inch (406 mm) long by 13 inch (330 mm) wide oval bowl11. Bowl Color: _________12. Bowl Color: As selected by Architect from manufacturer's full line of colors13. Deck Color: ____________.14. Deck Color: As selected by Architect from manufacturer's full line of color15. Soap Dispenser: 16 oz (0.47 L) plastic globe, 4 inch (102 mm) spout.16. Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 4 inch (102 mm) spout.17. Soap Dispenser: 32 oz (0.95 L) plastic globe, 4 inch (102 mm) spout.18. Soap Dispenser: 1.5 gal (5.7 L) large soap reservoir, 4 inch (102 mm) spout.19. Backsplash: 3 inches (76 mm) high; length to match deck.20. Sidesplash, Left: 3 inches (76 mm) high; length to match deck21. Sidesplash, Right: 3 inches (76 mm) high; length to match deck.22. Sidesplash, Both: 3 inches (76 mm) high; length to match deck.23. Sidesplash:________________.24. Front Apron: 3 inches (76 mm) high; length to match deck.25. Side Apron, Left: 3 inches (76 mm) high; length to match deck.26. Side Apron, Right: 3 inches (76 mm) high; length to match deck.27. Side Apron, Both: 3 inches (76 mm) high; length to match deck.28. Waste Receptacle Opening: 9 inches (229 mm) by 9 inches (229 mm).29. Edging: Roundover.30. Edging: Beveled.31. Mounting: Mounting brackets; heavy gage stainless steel; included.32. Mounting: In-wall carriers; by others.33. Mounting: Wall cleating; by others.34. Water Supply: Thermostatic mixing assembly for hot and cold supplies.35. Water Supply: Single tempered line.36. Provide putty colored trap cover.37. Provide 21-gallon capacity waste receptacle with retainer.38. Provide Terreon kneewall cap.39. Provide plug-in transformer with security bracket and screws.

D. Two Sink Countertops: Bradley Terreon Omnideck, LD-3070 Series; one, two or three station deck with integral bowls; contoured front apron and coved 3 inch (76 mm) backsplash; strainer and p-trap included; casework provided by others; designed to comply with ADA guidelines on reaches and clearances when mounted at recommended height dimensions.1. Faucet: ____________.2. Faucet: As selected by Architect.3. Faucet Mounting: 4 inches (100 mm) on center.4. Faucet Mounting: 8 inches (203 mm) on center.5. Faucet Mounting: Single hole.6. Faucet Mounting: No Drilling.7. Configuration: One sink; complete unit 30 inches (762 mm) long by 21 inches (533

mm) wide.8. Configuration: Two sinks; complete unit 60 inches (1524 mm) long by 21 inches (533

mm) wide9. Configuration: Three sinks; complete unit 90 inches (2286 mm) long by 21 inches

(533 mm) wide.10. Bowl Size: 15-3/4 inch (400 mm) diameter bowl11. Bowl Color: _________12. Bowl Color: As selected by Architect from manufacturer's full line of colors13. Deck Color: ____________.14. Deck Color: As selected by Architect from manufacturer's full line of color15. Soap Dispenser: 16 oz (0.47 L) plastic globe, 4 inch (102 mm) spout.

15416-12

16. Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 4 inch (102 mm) spout.17. Soap Dispenser: 32 oz (0.95 L) plastic globe, 4 inch (102 mm) spout.18. Soap Dispenser: 1.5 gal (5.7 L) large soap reservoir, 4 inch (102 mm) spout.19. Backsplash: 3 inches (76 mm) high; length to match deck.20. Sidesplash, Left: 3 inches (76 mm) high; length to match deck21. Sidesplash, Right: 3 inches (76 mm) high; length to match deck.22. Sidesplash, Both: 3 inches (76 mm) high; length to match deck.23. Sidesplash:________________.24. Front Apron: 3 inches (76 mm) high; length to match deck.25. Side Apron, Left: 3 inches (76 mm) high; length to match deck.26. Side Apron, Right: 3 inches (76 mm) high; length to match deck.27. Side Apron, Both: 3 inches (76 mm) high; length to match deck.28. Waste Receptacle Opening: 9 inches (229 mm) by 9 inches (229 mm).29. Edging: Roundover.30. Edging: Beveled.31. Mounting: Mounting brackets; heavy gage stainless steel; included.32. Mounting: In-wall carriers; by others.33. Mounting: Wall cleating; by others.34. Water Supply: Thermostatic mixing assembly for hot and cold supplies.35. Water Supply: Single tempered line.36. Provide putty colored trap cover.37. Provide 21-gallon capacity waste receptacle with retainer.38. Provide Terreon kneewall cap.39. Provide plug-in transformer with security bracket and screws.

E. Countertop with Integral Sink: Bradley Terreon Omnideck, TCS-Series; one user per station, multiple user possible; coved 3 inch (76 mm) backsplash; strainer and p-trap included; casework provided by others; designed to comply with ADA guidelines on reaches and clearances when mounted at recommended height dimensions.1. Faucet: ______________.2. Faucet: As selected by Architect.3. Faucet: Gooseneck faucet with wristblade handles; 12-1/4 inches (311 mm) total

height from deck, 10-1/2 inches (267 mm) total width including handles.4. Faucet: Gooseneck faucet with single lever; 10-3/4 inches (273 mm) total height from

deck, 8-1/2 inches (216 mm) total width including le5. Faucet Mounting: 4 inches (100 mm) on center.6. Faucet Mounting: 8 inches (203 mm) on center7. Faucet Mounting: Single hole.8. Sink: Undermount bowl; 21 inches (533 mm) long by 16 inches (406 mm) wide by 3-

1/2 inches (89 mm) deep.9. Sink: Undermount bowl; 21 inches (533 mm) long by 16 inches (406 mm) wide by 8

inches (203 mm) deep.10. Backsplash: 3 inches (76 mm) high; length to match deck.11. Drip Ledge: Four sided, around sink perimeter.12. Soap Dispenser: Liquid soap dispenser.13. Bowl Color: ____________.14. Bowl Color: As selected by Architect from manufacturer's full line of colors.15. Deck Color: ____________.16. Deck Color: As selected by Architect from manufacturer's full line of colors.17. Mounting: On perimeter framing support, attached to casework using silicone sealant;

casework by others.18. Drinking Fountain: _____________.19. Drinking Fountain: Push button operated.20. Drinking Fountain: Lever operated.21. Waste Receptacle Opening: 9 inches (229 mm) by 9 inches (229 mm

15416-13

2.4 WASHFOUNTAINS

A. Floor-supported Washfountain: Bradley, Classic Washfountain, 2500 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.1. Bowl:

a. Terreon solid surface material.2. Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and

panels:a. Stainless steel pedestal panels with #4 finish.

3. Configuration:a. Semi-circular 36 inch (914 mm) diameter, 3 user.b. Semi-circular 54 inch (1372 mm) diameter, 4 user.c. Circular 36 inch (914 mm) diameter, 5 user.d. Circular 54 inch (1372 mm) diameter, 8 user.e. 9 inch (229 mm) deep bowl.f. 9 inch (229 mm) deep bowl with backsplash.

4. Unit Height:a. 29-1/2 inch (749 mm).

5. Spray Ring: Non-sectional, with operating range of 20 to 80 psi (138 to 552 kPa), flow rate as required by fixture size.a. Foot Control Operation: Operation of foot rail activates hold-open valve with

slow closing upon release of rail.b. Hand Control Operation: Operation of pushbutton activates an air-metering

valve with field-adjustable timing.c. Infrared Sensor Operation: Infrared sensing module and solenoid with

adjustable turn off delay and automatic shut-off, with 110/24 VAC plug-in transformer.

d. Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve with 110/24 VAC plug-in transformer.

6. Water Supply:a. Manual mixing valve.b. Single tempered line.c. Single adjustable thermostatic mixing valve.

7. Drain and Supply Configuration:a. Off-line vent with supplies from below.b. Centrally rising vent with supplies from above.c. Centrally rising vent with supplies from above with stainless steel overhead

piping shroud.d. Centrally rising vent with supplies from below.e. Off-line vent with supplies from above.f. Off-line vent with supplies from above with stainless steel overhead piping

shroud.8. Accessories:

a. Soap Dispenser:1) Powdered soap.2) Powdered soap, with metal cladding.3) Liquid soap.4) Liquid soap, with metal cladding.

b. Paper Towel Dispenser: Stainless steel, with tie pipe assembly.1) Single-fold.2) C-fold.

c. Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for accepting 1-1/2 inch diameter pipe.

d. Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.9. Bowl Color: As selected by Architect from manufacturer's full line.

15416-14

B. Floor-supported Washfountain: Bradley, Classic Washfountain, 2600 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.1. Bowl:

a. Precast terrazzo.2. Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and


3. Configuration:a. Semi-circular 36 inch (914 mm) diameter, 3 user.b. Semi-circular 54 inch (1372 mm) diameter, 4 user.c. Circular 36 inch (914 mm) diameter, 5 user.d. Circular 54 inch (1372 mm) diameter, 8 user.e. Corner 54 inch (1372 mm) diameter, 5 user.f. 9 inch (229 mm) deep bowl.g. 9 inch (229 mm) deep bowl with backsplash.















15416-15

C. Floor-supported Washfountain: Bradley, Classic Washfountain, 2700 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.1. Bowl:

a. Stainless steel.2. Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and



4. Unit Height:a. 28 inch (711 mm).













d. Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.

D. Floor-supported Washfountain: Bradley, Classic Washfountain, 2800 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply

15416-16

connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.1. Bowl:

a. Bradstone reinforced thermoset polyester.2. Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and

panels:a. Stainless steel pedestal panels with #4 finish.b. ABS pedestal panels.
















E. Floor-supported Washfountain: Bradley, Classic Washfountain, 3100 series. ADA/TSA compliant. Include spray ring with stainless steel support tube, mixing valve, volume control

15416-17

valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.1. Bowl:


panels:a. Gel coated fiberglass panels.b. Stainless steel kick plate with #4 finish.

3. Configuration:a. Semi-circular 36 inch (914 mm) diameter, 3 user.b. Circular 36 inch (914 mm) diameter, 5 user.c. Semi-circular 54 inch (1372 mm) diameter, 4 user.d. Circular 54 inch (1372 mm) diameter, 8 user.e. 7-1/2 inch (191 mm) deep bowl.f. 7-1/2 inch (191 mm) deep bowl with backsplash.

4. Unit Height:a. 30 inch (749 mm) ADA compliant.b. 32 inch (813 mm). TSA compliant.c. 34 inch (864 mm).














15416-18

F. Floor-supported Washfountain: Bradley, Classic Washfountain, 3200 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.1. Bowl:


panels:a. Gel coated fiberglass panels.b. Stainless steel kick plate with #4 finish.

3. Configuration:a. Semi-circular 36 inch (914 mm) diameter, 3 user.b. Semi-circular 54 inch (1372 mm) diameter, 4 user.c. Circular 54 inch (1372 mm) diameter, 8 user.d. 9 inch (229 mm) deep bowl.e. 9 inch (229 mm) deep bowl with backsplash.

4. Unit Height:a. 34 inch (864 mm). (54 inch circular and semi-circular).b. 35 inch (898 mm). (36 inch semi-circular).














15416-19

G. Wall-Mounted, Vandal-Resistant Shallow Bowl Washfountain: Sentry Washfountain 2000 series preassembled bowl and pedestal unit constructed of stainless steel with chrome plated exposed fittings. ADA/TSA compliant. Includes individual spray heads per station with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stops, strainers, and check valves. Vandal-resistant construction with concealed spray heads and connections, with support tube integrally welded to bowl. IPC/cUPC-certifed by IAPMO.1. Bowl:



3. Configuration:a. Semi-circular 36 inch (914 mm) diameter, 3 user.b. Semi-circular 54 inch (1372 mm) diameter, 4 user.c. Corner 54 inch (1372 mm) diameter, 4 user.d. 5 inch (127 mm) deep bowl.e. 5 inch (127 mm) deep bowl with backsplash.


5. Individual Spray Heads: with operating range of 20 to 80 psi (138 to 552 kPa), flow rate is .5 GPM per station.a. Foot Control Operation: Operation of foot pushbutton activates hold-open valve

with slow closing upon release of pushbutton.b. Hand Control Pushbutton Operation: Operation of pushbutton activates an air

metering valve with field-adjustable timing.c. Infrared Sensor Operation: Infrared sensing module and solenoid with

automatic shut-off, with 110/24 VAC plug-in transformer.d. Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve,

with 110/24 VAC plug-in transformer.6. Water Supply:

a. Single tempered line.b. Single adjustable thermostatic mixing valve.c. Pressure balance mixing valve.







d. Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.

15416-20

H. Floor-supported, Vandal-Resistant Shallow Bowl Washfountain: Sentry Washfountain 2000 series preassembled bowl and pedestal unit constructed of stainless steel with chrome plated exposed fittings. ADA/TSA compliant. Includes individual spray heads per station with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stops, strainers, and check valves. Vandal-resistant construction with concealed spray heads and connections, with support tube integrally welded to bowl. IPC/cUPC-certifed by IAPMO.1. Bowl:



3. Configuration:a. Semi-circular 36 inch (914 mm) diameter, 3 user.b. Semi-circular 54 inch (1372 mm) diameter, 4 user.c. Circular 36 inch (914 mm) diameter, 5 user.d. Circular 54 inch (1372 mm) diameter, 8 user.e. Corner 54 inch (1372 mm) diameter, 3 user.f. 5 inch (127 mm) deep bowl.g. 5 inch (127 mm) deep bowl with backsplash.

4. Unit Height:a. 33-1/4 inch (845 mm) semi-circular.b. 33-1/2 inch (851 mm), circular.

5. Individual Spray Heads: with operating range of 20 to 80 psi (138 to 552 kPa), flow rate is .5 GPM per station.a. Foot Control Operation: Operation of foot pushbutton activates hold-open valve

with slow closing upon release of pushbutton.b. Hand Control Pushbutton Operation: Operation of pushbutton activates an air

metering valve with field-adjustable timing.c. Infrared Sensor Operation: Infrared sensing module and solenoid with

automatic shut-off, with 110/24 VAC plug-in transformer.d. Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve,

with 110/24 VAC plug-in transformer.6. Water Supply:

a. Single tempered line.b. Single adjustable thermostatic mixing valve.c. Pressure balance mixing valve.






c. Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for

15416-21

accepting 1-1/2 inch diameter pipe.d. Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.

I. Wall-mounted/Wall-Mounted and Floor-Supported Washfountain: Bradley, Multi-Fount Washfountain System, MF 2900 series, constructed of Terron solid surface material with integral continuous bowl, compact deck, and backsplash ledge containing concealed, vandal-resistant spray head. ADA/TSA compliant. Unit includes waste and supply connections to wall with stop, strainer, and check valves, and steel support frame, concealed by tamper-resistant stainless steel access panel. ADA/ABA, and ANSI A117.1 compliant. IPC/cUPC-certifed by IAPMO.1. Bowl:

a. Terreon solid surface material.2. Configuration:

a. 36 by 26 inch (914 by 660 mm), 1 or 3 users.b. 46 by 26 inch (1168 by 680 mm), 1 or 3 users.c. Corner 26-3/4 (679 mm) by 31-13/16 (808 mm), 1 or 2 users.


4. Water Supply:a. Single tempered line.b. Single adjustable thermostatic mixing valve.

5. Bowl/Spray Head/Pedestal Color: As selected by Architect from manufacturer's full line.

J. Multi-Station, Vandal-Resistant Wall Sink,: Bradley, Multistation Wall Sink constructed of 14 ga. Type 304 stainless steel with reinforcing channels. Frame constructed of 1-1/2 inch (38 mm) stainless steel tubing with adjustable height floor flanges. Preassembled unit includes drain spud and dome grate strainer and 1-1/2 (38 mm) inch diameter tailpiece.1. Fixture Size:

a. 48 by 18 inch (1219 by 457 mm) 2 user.b. 62 by 18 inch (1575 by 457 mm) 3 user.c. 80 by 18 inch (2032 by 457 mm) 4 user.d. 102 by 18 inch (2591 by 457 mm) 5 user.

2. Faucet:a. Pushbutton Metering Faucet.b. As specified in Section _____.

K. Multi-Station, 8-User Vandal-Resistant Island Sink: Bradley, Multistation Island Sink, constructed of 14 ga. Type 304 stainless steel with reinforcing channels and sound deadening material on underside. Frame constructed of 1-1/2 inch (38 mm) stainless steel tubing with adjustable height floor flanges. Column-mounted stainless steel valve manifold housing. Preassembled unit includes drain spud and dome grate strainer and 1-1/2 (38 mm) inch diameter tailpiece.1. Fixture Size:

a. 30 by 72 inch (762 by 1829 mm).b. 40 by 72 inch (1016 by 1829 mm).

2. Faucet:a. Pushbutton Metering Faucet.b. As specified in Section _____.

2.5 FAUCETS

A. Electronic Lavatory Faucets:1. Sensor-Operated, Low Profile Metering Faucet with Infrared Control: Bradley, Aerada

900 Series Futura, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.a. Body:

15416-22

1) Polished chrome plated commercial solid cast brass, with:a) Centershank mounting.b) 4 inch (102 mm) centerset mounting.c) 8 inch (203 mm) centerset mounting.

b. Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).

c. Water Supply:1) Single tempered line.2) Manual mixing valve, deck-mounted.3) Single thermostatic mixing valve.4) Remote thermostatic mixing valve assembly for faucets with surface-

mounted cabinet.5) Remote thermostatic mixing valve assembly for faucets with recessed]

cabinet.d. Sensor Module:

1) Water-conserving, vandal-resistant adjustable dual sensor unit with timing turn-off delay and stationary object automatic timed cutoff.

2) Water-conserving, vandal-resistant adaptive single sensor unit with timing turn-off delay and stationary object automatic timed cutoff.

e. Power Supply:1) Single faucet 110VAC/24VDC, 50/60Hz plug-in transformer with anti-

theft bracket.2) Provide with remote transformer for multiple faucets indicated on the

Drawings.2. Sensor-Operated, Gooseneck Metering Faucet with Infrared Control: Bradley, Aerada

1000 Series Gooseneck, vandal-resistant accessible faucet, meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.a. Body:

1) Polished chrome plated commercial solid cast brass, with:a) Centershank mounting.b) 4 inch (102 mm) centerset mounting.

b. Aerator:1) Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to

552 kPa).2) Provide 1.6 gpm (0.100 L/s) laminar flow insert with plain spray ring and

2.2 gpm (0.139 L/s) aerator insert.c. Water Supply:

1) Single tempered line.2) Manual mixing valve, deck-mounted.3) Single thermostatic mixing valve.

d. Sensor Module: Water-conserving, vandal-resistant sensor unit with programmable sensor range, with field-configurable timing turn-off delay and stationary object automatic timed cutoff.

e. Power Supply:1) Battery operated.2) Single faucet 110VAC/6VDC, 50/60Hz plug-in transformer with anti-theft

bracket.3. Sensor-Operated, High Profile Metering Faucet with Infrared Control: Bradley, Aerada

1100 Series High Arc, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. IPC/cUPC-certifed by IAPMO. ADA/ANSI A117.1 compliant.a. Body:

1) Polished chrome plated commercial solid cast brass, with:a) Centershank mounting.b) 4 inch (102 mm) centerset mounting.


15416-23

c. Water Supply:1) Single tempered line.2) Manual mixing valve, deck-mounted.3) Single thermostatic mixing valve.

d. Sensor Module: Water-conserving, vandal-resistant adjustable sensor unit with timing turn-off delay and stationary object automatic timed cutoff.

e. Power Supply: Battery-operated single faucet with 100/240VAC plug-in adapter.

4. Capacitive-Sensor-Operated, Low Profile Metering Faucet with Infrared Control: Bradley, Aerada 1200 Series CS, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. IPC/cUPC-certifed by IAPMO. ADA/ANSI A117.1 compliant.a. Body:


b. Aerator: Laminar Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).


d. Sensor Module: Water-conserving, vandal-resistant capacitive-sensing [adjustable sensor unit] with omni-directional sensing zone, timing turn-off delay and stationary object automatic timed cutoff.

e. Power Supply:1) Battery-operated with below-deck-mounted battery box.2) Battery-operated with below-deck-mounted battery box and single faucet

100/120VAC/6VDC plug-in adapter.3) Battery-operated with below-deck-mounted battery box and 6-faucet

100/120VAC/6VDC plug-in adapter.5. Capacitive-Sensor-Operated, Gooseneck Metering Faucet with Infrared Control:

Bradley, Aerada 1200 Series CS Gooseneck. Vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. IPC/cUPC-certifed by IAPMO. ADA/ANSI A117.1 compliant.a. Body:


b. Aerator: Laminar Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).


d. Sensor Module: Water-conserving, vandal-resistant capacitive-sensing [adjustable sensor unit] with omni-directional sensing zone, timing turn-off delay and stationary object automatic timed cutoff.

e. Power Supply:1) Battery-operated with below-deck-mounted battery box.2) Battery-operated with below-deck-mounted battery box and single faucet

100/120VAC/6VDC plug-in adapter.3) Battery-operated with below-deck-mounted battery box and 6-faucet

100/120VAC/6VDC plug-in adapter.

15416-24

B. Mechanical Lavatory Faucets:1. Low Profile Metering Faucet with Touch Operation: Bradley, Aerada 90-75 Series

Metering Faucet, vandal-resistant, accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.a. Body:



c. Metering Valve: Light-touch, 10 second auto shutoff, with replaceable valve cartridge.

d. Water Supply:1) Single tempered line.2) Manual mixing valve, deck-mounted.3) Single thermostatic mixing valve.

2. Low Profile, Mixing Faucet with Wrist Blade Operation: Bradley, Aerada 90-80 Series Wristblade Faucet, vandal-resistant, accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.a. Body: Polished chrome plated commercial solid cast brass, with 4-inch (102

mm) centerset.b. Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to

552 kPa).c. Operation: One-quarter turn, ADA-compliant wrist blade handles.

2.6 SHOWERS

A. Prefabricated Modular Shower System: Bradley, Panelon Prefabricated Modular Shower System, No. 304 Stainless steel housing concealing piping and controls, with multiple shower heads and accessories, copper supply piping sized for number of shower heads indicated, with end caps, fillers, access panels, and stanchions where required, with flow rate of 2.0 - 2.5 gpm (0.128 to 0.160 L/s) at operating range of 20 to 80 psi (138 to 552 kPa), and including the following:1. Shower Stations: As indicated on the Drawings.2. Configuration:

a. Wall mounted.b. Back-to-back.

3. Water Supply:a. Valve for Hot/Tempered and Cold Supply:

1) Washerless mixing valve.2) Pressure balancing valve.3) Heavy-duty pressure balancing valve.4) Thermostatic mixing valve.5) Hot and cold compression valve.

b. Valve for Single Tempered/Cold Supply:1) Infrared metering valve with 24VAC transfomer.2) Mechanical metering valve.3) Air metering valve.4) Single compression valve.5) Touch Time metering valve with 24VAC transfomer.

4. Accessible Module: Equip with diverter valve, backflow preventer, hand-held shower spray with 60 inch (1524 mm) steel flexible hose and mounting post, 24 inch (610 mm) grab bar, and molded plastic folding shower seat, 250 lb. (113 kg) capacity.

5. Shower Head:a. Low-flow fixed.

15416-25

b. Ball joint.c. Ball joint with volume control.d. Severe service.

6. Accessories:a. Recessed soap dishes, one per showerhead.b. Liquid Soap Dispensers: Valves with containers recessed in enclosure, one per

pair of showerheads.c. Vertical shroud.d. Stanchions, stainless steel.e. Supply stops.

B. Wall Showers: Bradley, Wall Shower, WS-Series, preassembled 18 ga. 304 stainless steel housing with all stainless steel or chrome plated exposed fittings, with shower heads and accessories, cast brass valve bodies, and flexible stainless steel supply inlets. Unit delivers flow rate of 2.0 - 2.5 gpm (0.128 to 0.160 L/s) at operating range of 20 to 80 psi (138 to 552 kPa), and including the following:1. Shower Stations:

a. 2.b. 3.

2. Shower Height:a. Standard height 72 inch (1829 mm).b. Juvenile height 66 inch (1676 mm).

3. Housing Mounting:a. Surface mounted.b. Surface mounted, hinged.c. Surface mounted, corner unit.d. Recessed (flush) mounted.




5. Accessible Unit: Equip one station or shower with diverter valve, backflow preventer, hand-held shower spray with 60 inch (1524 mm) steel flexible hose and mounting post, 24 inch (610 mm) grab bar, and molded plastic folding shower seat, 250 lb. (113 kg) capacity.

6. Shower Head:a. Low-flow fixed.b. Ball joint.c. Ball joint with volume control.d. Severe service.


pair of showerheads.c. Vertical shroud.d. Horizontal shroud.

15416-26

C. Column Showers: Bradley, Column Shower, COL-Series, preassembled 16 ga. 304 stainless steel housing with all stainless steel or chrome plated brass exposed fittings, with shower heads and accessories, cast brass valve bodies and manifold, copper tubing supply inlets, and cast iron drain fitting. Unit delivers flow rate of 2.0 - 2.5 gpm (0.128 to 0.160 L/s) at operating range of 20 to 80 psi (138 to 552 kPa), and includes the following:1. Shower Stations:

a. 2.b. 3.c. 4.d. 5.e. 6.

2. Shower Height:a. Standard height 72 inch (1829 mm).b. Juvenile height 66 inch (1676 mm).

3. Drain and Supply Configuration:a. Off-line vent with supply from below.b. Off-line vent with supply from above.c. Centrally rising vent with supplies from below.d. Centrally rising vent with supplies from above.




5. Accessible Unit: Equip one station with diverter valve, backflow preventer, hand-held shower spray with 60 inch (1524 mm) steel flexible hose and mounting post, 24 inch (610 mm) grab bar, and molded plastic folding shower seat, 250 lb. (113 kg) capacity.



pair of showerheads.c. Vertical shroud.

D. Shower Compartments:1. Partitions: 300 stainless steel sheets with No. 4 finish, laminated to honeycomb core

with waterproof adhesives, with stirrup brackets.2. Accessible.3. Shower Base Receptor: Solid surface material with slip-resistant surface and integral

drain, strainer, and outlet.4. Posts: 1 1/4 by 1 1/4 inch (32 mm by 32 mm) by 18 ga. thick stainless steel tube with

adjustable floor anchor.5. Curtain Rail: 300 stainless steel tubing with No. 4 finish, with zinc chromate finish

[wire curtain hooks] [roller curtain hooks] [and robe hooks].

15416-27

6. Curtain: Herculite vinyl, translucent, with hemmed edges and aluminum grommet reinforced eyelets.

7. Shower Seat: Folding unit, molded plastic, 250 lb. (113 kg) capacity.

E. Shower Faucet/Mixing Valve: Bradley, Model 1C Built-in Shower, single-lever, commercial solid cast brass with polished chrome finish, flow rate 2.5-gpm (0.16-L/s) maximum.1. Water Supply:

a. Thermostatic.b. Pressure-balance.c. Thermostatic and pressure-balance.d. Air metering.e. Touch Time electronic.f. Infrared electronic.g. Hot and cold compression.h. Single compression.i. Washerless mixing.

2. Shower Arm:a. Fixed vandal-resistant shower arm fitting.b. Fixed bent arm fitting.


4. Accessories:a. Hand-held fitting with 60 inch (1524 mm) flexible hose and hook.b. Hand-held fitting with 60-inch (1524 mm) flexible hose and slide bar.

F. Shower Drain: Corrosion-resistant-metal drain with removable strainer and NPS 2 (DN 50) bottom outlet.

2.7 ACCESSORlES

A. Countertop with Waste Receptacle: SS-Series compatible; 13 gallon capacity; solid surface cover; vacuum acrylic laminate base; 16 inches (406 mm) long by 9 inches (229 mm) wide by 24-1/2 inches (622 mm) high; equipped with two heavy-gage stainless steel brackets support brackets and mounting hardware.1. Mounting: Between two Express Lavatory Systems, SS-Series.2. Mounting: Between Express Lavatory System, SS-Series and alcove wall.3. Cover: Modifiable to accommodate 17 inches (432 mm) to 20 inches (508 mm) spans.4. Cover Color: ___________.5. Cover Color: As selected by Architect from manufacturer's full line of colors.6. Panel Color: Gray.7. Panel Color: Putty.8. Panel Color: Coal.

B. Countertop with Waste Receptacle: MG-Series compatible; 16 gallon capacity; solid surface cover; 22 gage Type 304 stainless steel base; 18 inches (457 mm) long by 10 inches (254 mm) wide by 25 inches (635 mm) high; equipped with support brackets and mounting hardware.1. Mounting: Between two Express Lavatory Systems, MG-Series.2. Mounting: Between Express Lavatory System, MG-Series and alcove wall.3. Cover: Modifiable to accommodate 19 inches (483 mm) to 20 inch (508 mm) spans.4. Cover Color: ___________.5. Cover Color: As selected by Architect from manufacturer's full line of colors.6. Panel Color: Gray.7. Panel Color: Putty.

15416-28

8. Panel Color: Coal.9. Liner: Vinyl; reusable with hook and loop fasteners.

C. Purse Shelf: Bradley Terreon; 12 inches (305 mm) deep; equipped with mounting hardware (dependent on length selected).1. Color: ____________.2. Color: As selected by the Architect from the manufacturer's full line of colors.3. Length: 36 inches (914 mm)4. Length: 72 inches (1829 mm).5. Length: 156 inches (3962 mm).6. Length: ______________.7. Length: As selected by Architect.8. Front Apron: Width as selected by Architect.

D. Trap Cover: Composed of vacuum formed 0.187 gage ABS plastic; resistant to stains, burns, and impact; will not chip, peel, or flake.

E. Countertop Components: Made of matching Terreon in sizes and configurations as indicated on drawings.

PART 3 EXECUTION

3.1 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

C. Verify electric power is available and of correct characteristics for specified equipment.

3.2 PREPARATION

A. Clean surfaces thoroughly prior to installation.

B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

C. Rough-in fixture piping connections for specified fixtures.

3.3 INSTALLATION

A. Install in accordance with manufacturer's instructions and approved shop drawings. Install components to be plumb, level, and rigid. Neatly scribe to adjoining surfaces, and field trim as required for snug fit.

B. Make plumbing and electrical connections.

C. Verify proper operation.

D. Adjust stops or valves for intended water flow rate to fixtures.

E. Mounting Height: As required to comply with ADA.

F. Mounting Height: As required to comply with TAS.

G. Mounting Height: As indicated on Drawings.

H. Mounting Height: ______________.

15416-29

3.4 CLEANING

A. Clean plumbing fixtures and equipment after installation.

3.5 PROTECTION

A. Protect installed products until completion of project.

B. Do not permit use of fixtures before final acceptance.

C. Touch-up, repair or replace damaged products before Substantial Completion.

3.6 SCHEDULES

A. :

B. :

END OF SECTION

15416-30

· web viewastm d 570 - standard test method for water absorption of plastics. astm d 638 -...

Documents