· web view2x redundant power inputs with 18…72v dc power range and typical power levels 24v dc,...

End-user logo Project name

Contractor or consultant logoDocument Title Document No. Rev

Detailed Functional Specification

XXX-XXX-XXX-XXX XX of 71

Detailed project name

Project part sub-name if required

DOCUMENT TITLE :

Detailed Function Specification

DATA NETWORK EQUIPMENT

00 DD/MM/YYXX XX XX XX XX

Engineer Technical manager QA manager Project

directorIssued for approval

REV DATE PREPARED CHECKED VERIFIED APPROVED PURPOSE OF ISSUE

(Disclosure, Reproduction and use other than for proposal evaluation strictly forbidden without prior written permission from XXX company)





REV ISSUE DATE MODIFICATION DESCRIPTIONPAGES

DELETED ADDED MODIFIED

00 DD/MM/YY First issue






Table of contents

1. Project overview………………………………………………………………………………………………………………7

2. Purpose…………………………………………………………………………………………………………………………….7

3. Related documents…………………………………………………………………………………………………………..7

4. Norms and standards…………………………………………………………………………….…………………………7

5. Parties definition………………………………………………………………………………………………………………9

6. Acronyms and abbreviations ………………………………………………………………………………………….9

7. General requirements to the data network infrastructure…………………………………………….10

8. Requirements to industrial Ethernet switches and its accessories…………………………..…….12

8.1 General requirements for industrial Ethernet switches…………………………………………12

8.1.1 Detailed requirements for managed industrial Ethernet switches – 16x gigabit ports models: 12x RJ45 + 4x SFP………………………………………………………………………………16

8.1.2 Detailed requirements for managed industrial Ethernet switches – 16x gigabit ports HSR/PRP models: 10x RJ45 + 2x HSR/PRP SFP x 2x SFP……………………………………18

8.1.3 Detailed requirements for managed industrial Ethernet switches – 16x gigabit ports models: 8x RJ45 + 8x SFP……………………………………………………………………………….21

8.1.4 Detailed requirements for managed industrial Ethernet switches – 16x gigabit ports models: 4x RJ45 + 12x SFP……………………………………………………………………………..23









8.1.8 Detailed requirements for managed compact ruggedized Ethernet switches – 6x gigabit ports models: 4x RJ45 + 2x SFP uplink………………………………………………………….33

8.1.9 Detailed requirements for managed compact ruggedized Ethernet switches – 6x gigabit ports models: 4x RJ45 + 1x RJ45 uplink + 1x SFP uplink………….…………………….35

8.2 General requirements for industrial power supplies…………………………………………….37

8.2.1 Detailed requirements for DIN-rail mounted industrial power supplies – 110/220V 48VDC 100W..…………………………………………………………………………………………38

8.2.2 Detailed requirements for DIN-rail mounted industrial power supplies – 110/220V 24VDC 100W…………………………………………………………………………………………..38

8.2.3 Detailed requirements for DIN-rail mounted industrial power supplies – 110/220V 24VDC 30W…………………………………………………………………………………………….39

8.2.4 Detailed requirements for DIN-rail mounted industrial power supplies – 110/220V 48VDC 60W…………………………………………………………………………………………….40



8.3 General requirements for optical SFP transceivers……………………………………………….43

8.3.1 Detailed requirements for SFP transceivers – 100Mbps, multimode, dual fibre, LC, 2km……………………………………………………………………………………………………………………43






8.3.2 Detailed requirements for SFP transceivers – 100Mbps, singlemode, dual fibre, LC, 10km…………………………………………………………………………………………………………………44



8.3.5 Detailed requirements for SFP transceivers – 100Mbps, singlemode, SF3, BiDi, single fibre, LC, 10km………………………………………………………………………………………………46




8.3.9 Detailed requirements for SFP transceivers – 1000Mbps, multimode, dual fibre, LC, 550m………………………………………………………………………………………………………………….49

8.3.10 Detailed requirements for SFP transceivers – 1000Mbps, singlemode, dual fibre, LC, 10km…………………………………………………………………………………………………………50



8.3.13 Detailed requirements for SFP transceivers – 1000Mbps, singlemode, dual fibre, LC, 120km………………………………………………………………………………………………………52

8.3.14 Detailed requirements for SFP transceivers – 1000Mbps, singlemode, SF3, BiDi, single fibre, LC, 10km………………………………………………………………………………………53







8.3.16 Detailed requirements for SFP transceivers – 1000Mbps, singlemode, SF3, BiDi, single fibre, LC, 40km……………………………………………………………………………………..54


8.4 General requirements for memory cards for industrial Ethernet switches.............56

8.4.1 General requirements for memory cards for industrial Ethernet switches – SD Memory Cards with MAC-Address…………………………………………………………………………..56

8.4.2 General requirements for memory cards for industrial Ethernet switches – SD Memory Cards with MAC-Address and MRP multi license……………………………………………………………………………………………………………………..57

8.4.3 General requirements for memory cards for ruggedized Ethernet switches – SD Memory Cards with MAC-Address…………………………………………………………………………..58

8.5 General requirements for configuration and maintenance software for industrial Ethernet switches…………………………………………………………………………..……………………………58

8.6 General requirements for support services for industrial Ethernet switches………..61

8.6.1 General requirements for industrial Ethernet switches “starting” support package……………………………………………………………………………………………………………………62

8.6.2 General requirements for industrial Ethernet switches “extended” support package……………………………………………………………………………………………………………………63

8.7 General requirements for industrial switches mounting accessories……………………64

8.7.1 General requirements for 19” 3HU DIN-rail mounting kits for managed industrial Ethernet switches…………………………………………………………………………………………………………………..64






8.7.2 General requirements for DIN-rail mounting kits for managed compact ruggedized Ethernet switches………………………………………………………………………………….65

1. Project overview

XXX – Project description text – XXX

2. Purpose

The purpose of the this document is to provide detailed requirements and descriptions of technical, operational and functional aspects for robust, reliable and highly available Ethernet data network for IP video surveillance, security and BMS systems in the harsh environments that are presented in XXX company campus.

3. Related documents

Origin Related document reference Document name

Contractor XXX – XXX - XXX XXXXXXX

Consultant

4. Norms and standards






Requirement Description

1000BASE-T Industry standard for Gigabit Ethernet transmission over EIA/TIA Category 5 UTP

1000BASE-LX/LH Industry standard for Gigabit Ethernet transmission over Multimode fiber (MMF) and Singlemode fiber (SMF)

XXX XXX

IEC 61850 Global standard for communication networks and systems for power utility automation

IEC 61850-3 General environmental requirements for the equipment used on substations

IEC 61850-6 Configuration language for communication in electrical substations related to IEDs

IEC 61850-7Basic communication structure: principles and models, Abstract communication service interface (ACSI), Common Data Classes, Compatible logical node classes and data classes etc.

IEC 61850-8 Specific communication service mapping (SCSM) - Mappings to Manufacturing Message Specification MMS

IEC 61850-9 Specific communication service mapping (SCSM)

IEC 62439-3:2016Industrial communication networks - High availability automation networksPart 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR)

IEEE 1613 Standard detailing environmental and testing requirements for communications networking devices in electric power substations

IEC 61000-6-2"Electromagnetic compatibility (EMC)Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)" is an international standard concerning the harmonics emitted by electric equipment.

IEC 61800-3

The IEC 61800-7 is an international standard for a universal interface for a variable speed drive entitled "Generic interface and use of profiles for power drive systems". The standard describes abstract, universal interface mapped to four different drive profiles and these are in turn mapped to different communication profiles of fieldbuses and industrial Ethernet.

IEC 60068A set of documents that contains information on environmental testing procedures published by the IEC and deals with environmental tests for electrical, electro-mechanical or electronic equipment and devices, their subassemblies and constituent parts and components.

IEC 60068-2-6 Part of IEC 60068 with requirements for environmental testing / Vibration






IEC 60068-2-27 Part of IEC 60068 with requirements for environmental testing / Shock

IEC 60068-2-32 Part of IEC 60068 with requirements for environmental testing / Free fall

EN 60950 Information technology equipment – Safety

EN 55022 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement.

IEEE 802.1AB Station and Media Access Control Connectivity Discovery

IEEE 802.1D MAC Bridges standard which includes Bridging, Spanning Tree and others.

IEEE 802.1XIEEE Standard for port-based Network Access Control (PNAC). It is part of the IEEE 802.1 group of networking protocols. It provides an authentication mechanism to devices wishing to attach to a LAN or WLAN.

ANSI/TIA-1057 The LLDP-MED protocol extension was approved and published as this standard.

ISO/IEC 15802-3 Information technology — Security techniques — Code of practice for information security management.

IEC 62439-2 The IEC standard for Media Redundancy Protocol (MRP).

AES256 The Advanced Encryption Standard (AES).

5. Partied definition

For the purpose of this document the following terms shall have the following meanings:

CLIENT representative is XXXXXX CONSULTANT is XXXXXX ENGINEER is the representative XXXXXX MAIN CONTRACTOR is XXXXXX, responsible for XXXXXX project SUB-CONTRACTOR is XXXXXX, responsible for XXXXXX part under the Main Contractor of the

XXXXXX project SYSTEM SUB-CONTRACTOR is XXXXXX






INSTALLATION SUB-CONTRACTOR XXXXXX for XXXXXX

6. Acronyms and abbreviations

XXX – The description of acronyms and abbreviations used in the text below description. For example:

SCADA (Supervisory Control And Data Acquisition) is a system of software and hardware elements (omputers, networked data communication devices, logic and PID controllers, graphical user interfaces for high-level process supervisory management, etc.) that allows industrial and other organizations to control different processes or engineering infrastructures: monitor the infrastructure, collect and process different data in real-time, interact with different devices of existed infrastructures (sensors, controllers, valves, pumps, switch gears, PLCs etc.) through unified human-machine interface (HMI) software with graphical interface, record events, etc.

7. General requirements to the data network infrastructure

The purpose of the above mentioned requirements is to build robust, reliable and highly available data network for IP video surveillance, security and BMS systems in the harsh environments present in XXX company campus.

Given the importance of the IT infrastructure and the role it has to play, it is critically important that it meets the following criteria:

Maximum reliability and longest life time on the network infrastructure: active and passive network components have to be designed to ensure highest reliability and longest life time in harsh environments present on the site. They should be robust and comply with industry standards that are valid for active and passive components respectively (see the requirements below).

Quality: the network components used for IP video surveillance, security and BMS systems of XXX company campus should have high quality. Using low grade, entry level or pure quality components is not allowed. The components, especially the






industrial Ethernet switches, should be produced by well known international manufacturers which have own production facilities located in EU for most of the components. Special importance should be paid on industrial switches side – the manufacturer should prove the switches developed and produced by its own factories.

Flexibility: the active industrial components should provide the necessary functionality and flexibility to build required network infrastructure but the topic of minimizing the maintenance stock should be respected – the number of different models used in the network have be minimized.

High availability: The proposed equipment has to offer a maximum level of protection against breakdowns and other unforeseen circumstances that may interrupt the proper functioning of the network. The network redundancy should be organized on a data transmission by using redundant topologies and protocols. The redundant power lines should be organized for all switches as well.

Interoperability: industrial network components should have a necessary interoperability with network core switches to provide the best performance and functionality. Additionally, those components should transport the data from connected devices to SCADA as well provide extended data about its own conditions and conditions of connected devices.

Security: the proposed solution must be secured against unauthorized access to the switches by using special features such as authentication levels for different users with different responsibility, ports security, protected communication (SCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etc.) etc. Additionally, network infrastructure should be protected from occasional ports disconnection by using lockable connectivity on the switches and patch panels. To improve the security even more, all network cabinets should be equipped with door sensors that are connected to I/O modules of the switches.

Easy maintenance: the solution must be able to reduce network maintenance cost and ensure a high level of responsiveness on different events. To ensure that, used industrial switches should have a configuration and maintenance software with an






intuitive GUI, extended diagnostic functionality and unique features specially targeted to make network maintenance and operations easier.

Powering end devices: to power many end devices present in the network through the same copper cabling by using Power over Ethernet technology, industrial switches should have maximum number of PoE+ ports with full power budget in accordance with respective IEEE standard.

Full solution: the vendor who provides not only industrial switches but also the full range of fibre and copper cabling components including DIN-rail mounted industrial patch panels is preferred.

8. Requirements to industrial Ethernet switches and its accessories

8.1 General requirements for industrial Ethernet switches

Considering harsh environments presented on the site, to build robust and reliable network for IP video surveillance, security and BMS system of XXX company campus DIN-rail mounted managed industrial Ethernet switches have to be used.

Chosen vendor should be well known international manufacturer with its own R&D and own factory that produce all industrial Ethernet switches in the EU. To prove own experience and capabilities, the factory visit can be requested. It’s preferred if the same vendor provides the full range of fibre and copper cabling components including an industrial range and DIN-rail mounted connectivity.

Chosen industrial Ethernet switches should have fully aluminum housing painted in black color without any holes and fans. To provide better cooling, the housing of a switch should have clearly visible ribs on all sides (with an exception of the front plate). Those ribs should be casted together with a switch housing (switches with a ribbed plates bolted to a housing is not accepted) and have maximum possible surface (a ribs depth on a switch side should be not less than 8mm). Because of the space limitation, used industrial switches should have the size not more than (W x H x D) 95 x 184 x 125 mm for 16x ports models, not more than






83 x 133 x 125 for 10x ports and not more than 90x45x70mm for compact ruggedized switch models.

Managed industrial Ethernet switches have to be equipped with the robust DIN-rail clip made from stainless steel. For more flexibility in installation used industrial switches should have different positions for DIN-rail clip mounting – on the back as well as on the side with the possibility to turn the mounting of the switch in a vertical or horizontal position.

Chosen industrial Ethernet switches should ensure high reliability and long lifetime in harsh environments of the site – high operating temperature range from -40 up to +85 oC in accordance with EN 60068-2-14 and IEC 60870-2-2, high level of humidity 20 - 90 % (non-condensing) in accordance with EN 60068-2-30 and other standards linked to environments and EMC protection: IEC 61850-3, IEC 61800-3, IEEE 1613, IEC 61000-6-2, EN 61131-2, EN 60068-2-1, EN 60068-2-2, EN 60068-2-6.

To confirm chosen industrial Ethernet switches and PSUs quality and robustness, the value of MTBF parameter, measured in the harsh environments, should be not less than 500 000 hours for industrial switches and not less than 1 000 000 hours for PSUs (for 24VDC 100W PSUs not less than 890 000 hours).

To build the network with lowest downtime, chosen switches should support a minimum of the following data redundancy protocols: STP, RSTP and MRP. The vendor should confirm the availability of HSR/PRP switch model(s) as well.

The switches should have two redundant power input with electrical shocks protection and a wide power range – from 18 till 72 VDC and typical power levels of 24, 48, 54 and 60VDC. In case of a power line failure (including voltage lowering), the switch should automatically change it to the second power line without a reboot or any failures. The switches should be able to inform the maintenance team about the power issues (even if the power range is lower than normal) by using syslog, SNMP traps

The switches power consumption, without considering PoE or PoE+, should be not more than 29W with a typical level of 15W for industrial Ethernet switches and not more than 5W watts with a typical level of 4.3W for ruggedized compact Ethernet switches.






To make the network maintenance easier, to reduce the time required for the fault detection and to forecast potential failures, chosen industrial Ethernet switches should have wide diagnostic functionalities and possibilities to set thresholds for chosen parameters. All parameters should be monitored in real-time – including but not limited to:

Provide the information about its condition and connected devices – temperature, power level on each redundant power inputs, PoE voltage, the switch uptime, number of boots, active MAC-address, memory card availability in the slot, ports usage, PoE/PoE+ status and parameters on each port, full information about the switch model, name, serial number and its product code, switch physical location etc.

SFP extended parameters and its control by setting thresholds:

o SFP transceiver vendor and product code, serial number, manufacturing date, connector type, wave length, bit rate, supported distance, operating temperature range, laser bias current range, transmitting and receiving light power range

o Controlled parameters: temperature, power supply voltage, laser bias current, transmitting and receiving light power in mW and dBm

o Parameters to set the values: power supply voltage, laser bias current, transmitting and receiving light power in mW and dBm

o The switches and SFP transceivers should support hot swap

It should be possible to define the switch name, its physical location, responsible person in the maintenance team and his/her contacts. This information should be visible in the maintenance software and web-interface of the industrial switches.

To make the network maintenance efficient, chosen switches should be equipped with SD memory cards. The switches should have the possibility to change its own MAC address to the one, fixed on the SD card that is inserted in the switch, and use this MAC-address as the main one. In case a switch failure or planned network upgrade, used SD cards should be removed from the old switches and installed to the new ones. New switches should use the configuration, firmware and MAC-address from those SD cards.






The LEDs of the switch ports should be configurable depending on the port activity, speed or link availability. Additionally, to highlight a necessary port during the installation or maintenance works, the switches should provide the possibility to set ports LEDs in on/off/blinking mode.

To ensure the correct network setup and operation, chosen switches should be interoperable with the network core switches. The vendor of chosen switches have to confirm the compatibility with Cisco, HP or Alcatel/Nokia switches by providing special setup manuals – not linked to the standard user manuals. Each provided document should be made and signed by the representatives of both vendors and should clearly explain the setup procedure for both vendors.

In addition, chosen switches have to support CDP protocol and Cisco Secure Access Control Server ACS.

For different network segments, chosen vendor should have industrial Ethernet switches with 16x and 10x gigabit ports in different combination of copper RJ45 ports and SFP slots. Usage of the switch models with COMBO ports (combined RJ45 and SFP ports when the only is working in case of usage) is not allowed. The vendor should confirm the availability of the switch models with a high number of gigabit SFP slots: 8x and 12x SFP slots.

For connecting and managing of different non-IP based devices presented on the site, chosen industrial Ethernet switches have to be equipped with at least 16 pins input and output interfaces (minimum 4 input and 2 independent output ports) for the 16x ports switches family, 12 pins (minimum 4 input and 2 independent output ports) for the 10x ports switches family and 2 pins (programmable input contacts with an alarm function) for the ruggedized compact switches family.The switches have to have the possibility to control connected devices by registering electrical circuit shut or open. To support the “dry contacts” devices type, the switches have to provide auxiliary power of 24V DC / max. 42mA. In the cases of providing the power from connected devices, the input power range, supported by the switch, has to be no less than 12…60V DC.To support different default statuses (normally open / normally shut) of connected devices, output ports of industrial switches have to be made by using relays with 3 contacts per each port – when one contact group of each relay is open, another has to be shut. The output






contacts power has 2A / 30V DC.Monitoring and managing of connected devices should be done by remote SCADA via SNMP traps, SYSLOG messages and IEC 61850 communication functionality.

Chosen industrial Ethernet switches should comply with the communication requirements of IEC 61850 standard – parts 6, 7-1, 7-2, 7-3, 7-4, 8-1, 9-1, 9-2. As well as with IEC 61850 requirements for SERVER functionality – MMS, GOOSE, abstract data modeling. The compliance with IEC 61850 Edition 2, parts 6, 7-1, 7-2, 7-3, 7-4, 8-1 has to be confirmed by KEMA/DNV-GL certificates.Chosen switches have to comply with requirements of IEC 61850-3 as well (General environmental requirements for the equipment are used on the substations).

The vendor should also confirm the availability of small ruggedized switches with 4x gigabit RJ45 ports and two gigabit uplinks (1x RJ45 + 1x SFP or 2x SFP). Chosen switches should have 4x PoE+ ports with 120W power budget and be equipped with free programmable input contacts. The switches should have the possibility to turn the head with RJ45 ports in the horizontal or vertical position. The housing of chosen ruggedized switches should be made from metal and have a size no more than 90 x 45 x 70 mm. If there is no DIN-rail clip on the switches, those switches can be equipped with DIN-rail mounting adaptor. The operating temperature range of those compact switches should be not less than -25 … +65oC. The switch input power range should be from 46 up to 57 VDC with the typical level of 54 VDC .

8.1.1 Detailed requirements for managed industrial Ethernet switches – 16x gigabit ports models: 12x RJ45 + 4x SFP

Power inputs:

PoE input:

Power consumption:Hold-up time:Temperature range (operating):Temperature range (storage):

2x redundant power inputs with 18…72V DC power range and typical power levels 24V DC, 48V DC and 60V DC1x power input with 46- 57V DC power range (typ. 48V DC for PoE)typ. 13W / typical 15W / max. 28W10 ms-40 … +85°C

-40 … +85°C






Mounting:Protection / IP:Dimensions [WxHxD]:Weight:Standards:

Network Interfaces:

Twisted Pair ports:Twisted Pair Link Length:Fiber Optic ports:

Fiber Optic Parameters:Power over Ethernet:

Power over Ethernet Supply:

Memory Card Interface:I/O interfaces (alarm and function Contacts):

DIP switches:

DIN-rail or Wall MountingIP 3095 x 184 x 125mm1800 gIEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX, 100BASE-FXIEEE 802.3ab 1000BASE-TIEEE 802.3zIEEE 802.3x Flow ControlIEEE 802.3af and IEEE 2802.3at12x 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity (for each Port selectable)12x RJ45 screened, impedance 100 ohm100 meter max.4x SFP Vario Slot 100/1000 BASE with Digital Diagnostic Monitoring (DDM) functionalityDepending on SFP-transceiver version12x PoE+ ports / up to 30W per port / 360W power budget for 12x ports in accordance with IEEE 802.3atPSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6Ready for PSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6 on up to 12x TP-Ports up to max. 30.0 VA per port (*in connection with PoE option)360 Watts / 12 portsFull PoE+ range acc. to IEEE 802.3at on all RJ45 portsSD-Slot, MMC compliant, secure encrypted storage16x pin block (screw-on type) to connect non-IP based devices: 2x independent programmable 2A / 30V DC outputs

(with changer function) 4x potential free programmable 12 … 60V DC inputs auxiliary voltage provided by the switch: 24V DC /

max. 42mA / For support of digital contacts dry contacts support via auxiliary voltage taken from

the switch2x DIP switches on the front plate with the function to






Housing

Mounting type:

Warning Management:

Redundancy Protocols:

Web interface and access:

Multiple security features:IEC 61850 Capability:

Industrial Standards/EMC:

Industrial Standards/Environment:

Special compliance and compatibility:MTBF:Warranty:

switch on the security modeRobust fully aluminum housing (anodized, black) with cooling ribs on all sides, no fans and no holes – with an exception of the face plate. Cooling ribs are not bolted on the housing sides but casted together with the switch housing.35mm DIN-Rail mounted in accordance with EN 60715, (EN 50022). Different mounting positions of DIN-rail clip – on the back and on the side with possibility to turn the clip for vertical and horizontal switch mounting. Optional: wall mounting.Internal Log-file, SNMP Traps, Syslog massages, Alarm GroupsSpanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, MRP-Media Redundancy Protocol acc. to IEC 62439Integrated / No proxy server required / TCP port number can be set for WEB accessSCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etcUCA certified IEC 61850 Class A Device with ServerCapability, Data Modeling according to IEC 61850-90-4 and IEC 61850-7, GOOSE and MMS supportIEC 61850-3; EN 60950; EN 61000-6-4; EN 55022 Class A; EN 55011 Class A; EN 61131-2; EN 61000-4-2, Class 3; EN 61000-4-3; EN 61000-4-4, Class 4; EN 61000-4-5, Class 4; EN 61000-4-6IEC 61850-3; IEEE 1613; EN 61131-2; EN 60068-2-1; EN 60068-2-2, EN 60068-2-14 (Temperature); IEC 60870-2-2, Class C3/Ct2 (tmin), Class C3/Dt1 (tmax), Class Cm (mech.), Class C1 (3K5 %), EN 60068-2-30 (Humidity); EN 60068-2-6 (Vibration); EN 60068-2-27 (Shock); EN 60068-2-32 (Free Fall)LLDP support, CDP support, Cisco Identity Services Engine ISE compatibility> 500 000 hours / In accordance with IEC 617095 years

Manufacturer:Product name code and name:Required PoE/PoE+ option:

Nexans88306400 Nexans iGigaSwitch 1604 E+ SFP-4VI PRO388301606 Nexans iOption PoE Type at 12-30






Required I/O option: 88301600 Nexans iSwitch I/O Module Digital 4xIn 2xOutProduct picture:

8.1.2 Detailed requirements for managed industrial Ethernet switches – 16x gigabit ports HSR/PRP models: 10x RJ45 + 2x HSR/PRP SFP x 2x SFP

Power inputs:

PoE input:

Power consumption:Hold-up time:Temperature range (operating):Temperature range (storage):Mounting:Protection / IP:Dimensions [WxHxD]:Weight:Standards:

Network Interfaces:

Twisted Pair ports:

2x redundant power inputs with 18…72V DC power range and typical power levels 24V DC, 48V DC and 60V DC1x power input with 46- 57 V DC power range (typ. 48V DC for PoE)typ. 13W / typical 15W / max. 28W10 ms-40 … +85°C

-40 … +85°CDIN-rail or Wall MountingIP 3095 x 184 x 125mm1800 gIEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX, 100BASE-FXIEEE 802.3ab 1000BASE-TIEEE 802.3zIEEE 802.3x Flow ControlIEEE 802.3af and IEEE 2802.3at12x 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity (for each Port selectable)10x RJ45 screened, impedance 100 ohm






Twisted Pair Link Length:Fiber Optic ports:

HSR/PRP ports:




Housing

Mounting type:

Warning Management:

100 meter max.2x SFP Vario Slot 100/1000 BASE with Digital Diagnostic Monitoring (DDM) functionality2x 100/1000Mbps HSR/PRP SFP Vario Slot with Digital Diagnostic Monitoring (DDM) functionalityDepending on SFP-transceiver version8x PoE+ ports / up to 30W per port / 240W power budget for 8x ports in accordance with IEEE 802.3atPSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6Ready for PSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6 on up to 8x TP-Ports up to max. 30.0 VA per port (*in connection with PoE option)240 Watts / 8 portsFull PoE+ range acc. to IEEE 802.3at on all RJ45 portsSD-Slot, MMC compliant, secure encrypted storage16x pin block (screw-on type) to connect non-IP based devices: 2x independent programmable 2A / 30V DC outputs



the switchRobust fully aluminum housing (anodized, black) with cooling ribs on all sides, no fans and no holes – with an exception of the face plate. Cooling ribs are not bolted on the housing sides but casted together with the switch housing.35mm DIN-Rail mounted in accordance with EN 60715, (EN 50022). Different mounting positions of DIN-rail clip – on the back and on the side with possibility to turn the clip for vertical and horizontal switch mounting. Optional: wall mounting.Internal Log-file, SNMP Traps, Syslog massages, Alarm GroupsSpanning Tree, Rapid Spanning Tree, Multiple Spanning












Tree, MRP-Media Redundancy Protocol acc. to IEC 62439, HSR (High-availability Seamless Ring), PRPIntegrated / No proxy server required / TCP port number can be set for WEB accessSCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etcUCA certified IEC 61850 Class A Device with ServerCapability, Data Modeling according to IEC 61850-90-4 and IEC 61850-7, GOOSE and MMS supportIEC 61850-3; EN 60950; EN 61000-6-4; EN 55022 Class A; EN 55011 Class A; EN 61131-2; EN 61000-4-2, Class 3; EN 61000-4-3; EN 61000-4-4, Class 4; EN 61000-4-5, Class 4; EN 61000-4-6IEC 61850-3; IEEE 1613; EN 61131-2; EN 60068-2-1; EN 60068-2-2, EN 60068-2-14 (Temperature); IEC 60870-2-2, Class C3/Ct2 (tmin), Class C3/Dt1 (tmax), Class Cm (mech.), Class C1 (3K5 %), EN 60068-2-30 (Humidity); EN 60068-2-6 (Vibration); EN 60068-2-27 (Shock); EN 60068-2-32 (Free Fall)LLDP support, CDP support, Cisco Identity Services Engine ISE compatibility> 500 000 hours / In accordance with IEC 617095 years

Manufacturer:Product name code and name:Required PoE/PoE+ option:Required I/O option:

Nexans88306406 Nexans iGigaSwitch 1606 HSR SFP-6VI PRO488301604 Nexans iOption PoE Type at 8-3088301600 Nexans iSwitch I/O Module Digital 4xIn 2xOut

Product picture:







Power inputs:

PoE input:


Network Interfaces:

Twisted Pair ports:Twisted Pair Link Length:Fiber Optic ports:



2x redundant power inputs with 18…72V DC power range and typical power levels 24V DC, 48V DC and 60V DC1x power input with 46- 57V DC power range (typ. 48V DC for PoE)typ. 13W / typical 15W / max. 28W10 ms-40 … +85°C

-40 … +85°CDIN-rail or Wall MountingIP 3095 x 184 x 125mm1800 gIEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX, 100BASE-FXIEEE 802.3ab 1000BASE-TIEEE 802.3zIEEE 802.3x Flow ControlIEEE 802.3af and IEEE 2802.3at12x 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity (for each Port selectable)8x RJ45 screened, impedance 100 ohm100 meter max.8x SFP Vario Slot 100/1000 BASE with Digital Diagnostic Monitoring (DDM) functionalityDepending on SFP-transceiver version8x PoE+ ports / up to 30W per port / 240W power budget for 8x ports in accordance with IEEE 802.3atPSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6Ready for PSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6 on up to 8x TP-Ports up to max. 30.0 VA per port (*in connection with PoE option)240 Watts / 8 ports







Housing

Mounting type:

Warning Management:





Industrial

Full PoE+ range acc. to IEEE 802.3at on all RJ45 portsSD-Slot, MMC compliant, secure encrypted storage16x pin block (screw-on type) to connect non-IP based devices: 2x independent programmable 2A / 30V DC outputs



the switchRobust fully aluminum housing (anodized, black) with cooling ribs on all sides, no fans and no holes – with an exception of the face plate. Cooling ribs are not bolted on the housing sides but casted together with the switch housing.35mm DIN-Rail mounted in accordance with EN 60715, (EN 50022). Different mounting positions of DIN-rail clip – on the back and on the side with possibility to turn the clip for vertical and horizontal switch mounting. Optional: wall mounting.Internal Log-file, SNMP Traps, Syslog massages, Alarm GroupsSpanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, MRP-Media Redundancy Protocol acc. to IEC 62439Integrated / No proxy server required / TCP port number can be set for WEB accessSCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etcUCA certified IEC 61850 Class A Device with ServerCapability, Data Modeling according to IEC 61850-90-4 and IEC 61850-7, GOOSE and MMS supportIEC 61850-3; EN 60950; EN 61000-6-4; EN 55022 Class A; EN 55011 Class A; EN 61131-2; EN 61000-4-2, Class 3; EN 61000-4-3; EN 61000-4-4, Class 4; EN 61000-4-5, Class 4; EN 61000-4-6IEC 61850-3; IEEE 1613; EN 61131-2; EN 60068-2-1; EN 60068-2-2, EN 60068-2-14 (Temperature); IEC 60870-2-2, Class C3/Ct2 (tmin), Class C3/Dt1 (tmax), Class Cm






Standards/Environment:


(mech.), Class C1 (3K5 %), EN 60068-2-30 (Humidity); EN 60068-2-6 (Vibration); EN 60068-2-27 (Shock); EN 60068-2-32 (Free Fall)LLDP support, CDP support, Cisco Identity Services Engine ISE compatibility> 500 000 hours / In accordance with IEC 617095 years


Nexans88306408 Nexans iGigaSwitch 1608 E+ SFP-8VI PRO388301604 Nexans iOption PoE Type at 8-3088301600 Nexans iSwitch I/O Module Digital 4xIn 2xOut

Product picture:


Power inputs:

PoE input:

Power consumption:Hold-up time:Temperature range (operating):Temperature range (storage):Mounting:Protection / IP:Dimensions [WxHxD]:

2x redundant power inputs with 18…72V DC power range and typical power levels 24V DC, 48V DC and 60V DC1x power input with 46- 57V DC power range (typ. 48V DC for PoE)typ. 13W / typical 15W / max. 28W10 ms

-40 … +85°C-40 … +85°CDIN-rail or Wall MountingIP 3095 x 184 x 125mm






Weight:Standards:

Network Interfaces:

Twisted Pair ports:Twisted Pair Link Length:Fiber Optic ports:Fiber Optic Parameters:

Power over Ethernet:



Housing

1800 gIEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX, 100BASE-FXIEEE 802.3ab 1000BASE-TIEEE 802.3zIEEE 802.3x Flow ControlIEEE 802.3af and IEEE 2802.3at12x 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity (for each Port selectable)4x RJ45 screened, impedance 100 ohm100 meter max.12x SFP Vario Slot 100/1000 BASE with Digital Diagnostic Monitoring (DDM) functionalityDepending on SFP-transceiver version4x PoE+ ports / up to 30W per port / 120W power budget for 4x ports in accordance with IEEE 802.3atPSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6Ready for PSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6 on up to 4x TP-Ports up to max. 30.0 VA per port (*in connection with PoE option)120 Watts / 4 portsFull PoE+ range acc. to IEEE 802.3at on all RJ45 portsSD-Slot, MMC compliant, secure encrypted storage16x pin block (screw-on type) to connect non-IP based devices: 2x independent programmable 2A / 30V DC outputs



the switchRobust fully aluminum housing (anodized, black) with cooling ribs on all sides, no fans and no holes – with an exception of the face plate. Cooling ribs are not bolted on the housing sides but casted together with the switch






Mounting type:

Warning Management:







housing.35mm DIN-Rail mounted in accordance with EN 60715, (EN 50022). Different mounting positions of DIN-rail clip – on the back and on the side with possibility to turn the clip for vertical and horizontal switch mounting. Optional: wall mounting.Internal Log-file, SNMP Traps, Syslog massages, Alarm GroupsSpanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, MRP-Media Redundancy Protocol acc. to IEC 62439Integrated / No proxy server required / TCP port number can be set for WEB accessSCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etcUCA certified IEC 61850 Class A Device with ServerCapability, Data Modeling according to IEC 61850-90-4 and IEC 61850-7, GOOSE and MMS supportIEC 61850-3; EN 60950; EN 61000-6-4; EN 55022 Class A; EN 55011 Class A; EN 61131-2; EN 61000-4-2, Class 3; EN 61000-4-3; EN 61000-4-4, Class 4; EN 61000-4-5, Class 4; EN 61000-4-6IEC 61850-3; IEEE 1613; EN 61131-2; EN 60068-2-1; EN 60068-2-2, EN 60068-2-14 (Temperature); IEC 60870-2-2, Class C3/Ct2 (tmin), Class C3/Dt1 (tmax), Class Cm (mech.), Class C1 (3K5 %), EN 60068-2-30 (Humidity); EN 60068-2-6 (Vibration); EN 60068-2-27 (Shock); EN 60068-2-32 (Free Fall)LLDP support, CDP support, Cisco Identity Services Engine ISE compatibility> 500 000 hours / In accordance with IEC 617095 years


Nexans88306412 Nexans iGigaSwitch 160C E+ SFP-12VI PRO388301602 Nexans iOption PoE Type at 4-3088301600 Nexans iSwitch I/O Module Digital 4xIn 2xOut






Product picture:


Power inputs:

PoE input:


Network Interfaces:

Twisted Pair ports:Twisted Pair Link Length:

2x redundant power inputs with 18…72V DC power range and typical power levels 24V DC, 48V DC and 60V DC1x power input with 46- 57V DC power range (typ. 48V DC for PoE)min. 13W / typ. 15W / max. 22W10 ms-40 … +85°C

-40 … +85°CDIN-rail or Wall MountingIP 3083 x 133 x 125mm1300 gIEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX, 100BASE-FXIEEE 802.3ab 1000BASE-TIEEE 802.3zIEEE 802.3x Flow ControlIEEE 802.3af and IEEE 2802.3at8x 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity (for each Port selectable)8x RJ45 screened, impedance 100 ohm100 meter max.






Fiber Optic ports:Fiber Optic Parameters:




Housing

Mounting type:

Warning Management:



2x SFP Vario Slot 100/1000 BASE with Digital Diagnostic Monitoring (DDM) functionalityDepending on SFP-transceiver version8x PoE+ ports / up to 30W per port / 240W power budget for 8x ports in accordance with IEEE 802.3atPSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6Ready for PSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6 on up to 8x TP-Ports up to max. 30.0 VA per port (*in connection with PoE option)240 Watts / 8 portsFull PoE+ range acc. to IEEE 802.3at on all RJ45 portsSD-Slot, MMC compliant, secure encrypted storage12x pin block (screw-on type) to connect non-IP based devices: 2x independent programmable 2A / 30V DC outputs



the switchRobust fully aluminum housing (anodized, black) with cooling ribs on all sides, no fans and no holes – with an exception of the face plate. Cooling ribs are not bolted on the housing sides but casted together with the switch housing.35mm DIN-Rail mounted in accordance with EN 60715, (EN 50022). Different mounting positions of DIN-rail clip – on the back and on the side with possibility to turn the clip for vertical and horizontal switch mounting. Optional: wall mounting.Internal Log-file, SNMP Traps, Syslog massages, Alarm GroupsSpanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, MRP-Media Redundancy Protocol acc. to IEC 62439Integrated / No proxy server required / TCP port number can be set for WEB access










SCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etcUCA certified IEC 61850 Class A Device with ServerCapability, Data Modeling according to IEC 61850-90-4 and IEC 61850-7, GOOSE and MMS supportIEC 61850-3; EN 60950; EN 61000-6-4; EN 55022 Class A; EN 55011 Class A; EN 61131-2; EN 61000-4-2, Class 3; EN 61000-4-3; EN 61000-4-4, Class 4; EN 61000-4-5, Class 4; EN 61000-4-6IEC 61850-3; IEEE 1613; EN 61131-2; EN 60068-2-1; EN 60068-2-2, EN 60068-2-14 (Temperature); IEC 60870-2-2, Class C3/Ct2 (tmin), Class C3/Dt1 (tmax), Class Cm (mech.), Class C1 (3K5 %), EN 60068-2-30 (Humidity); EN 60068-2-6 (Vibration); EN 60068-2-27 (Shock); EN 60068-2-32 (Free Fall)LLDP support, CDP support, Cisco Identity Services Engine ISE compatibility> 500 000 hours / In accordance with IEC 617095 years

Manufacturer:Product name code and name:Required PoE/PoE+ option:


Product picture:


Power inputs:

PoE input:

2x redundant power inputs with 18…72V DC power range and typical power levels 24V DC, 48V DC and 60V DC1x power input with 46- 57V DC power range (typ. 48V DC for PoE)







Network Interfaces:





min. 13W / typ. 15W / max. 22W10 ms-40 … +85°C

-40 … +85°CDIN-rail or Wall MountingIP 3083 x 133 x 125mm1300 gIEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX, 100BASE-FXIEEE 802.3ab 1000BASE-TIEEE 802.3zIEEE 802.3x Flow ControlIEEE 802.3af and IEEE 2802.3at4x 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity (for each Port selectable)4x RJ45 screened, impedance 100 ohm100 meter max.4x SFP Vario Slot 100/1000 BASE with Digital Diagnostic Monitoring (DDM) functionalityDepending on SFP-transceiver version4x PoE+ ports / up to 30W per port / 120W power budget for 8x ports in accordance with IEEE 802.3atPSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6Ready for PSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6 on up to 8x TP-Ports up to max. 30.0 VA per port (*in connection with PoE option)120 Watts / 4 portsFull PoE+ range acc. to IEEE 802.3at on all RJ45 portsSD-Slot, MMC compliant, secure encrypted storage12x pin block (screw-on type) to connect non-IP based devices: 2x independent programmable 2A / 30V DC outputs

(with changer function) 2x potential free programmable 12 … 60V DC inputs






Housing

Mounting type:

Warning Management:






Special compliance and compatibility:MTBF:

auxiliary voltage provided by the switch: 24V DC / max. 42mA / For support of digital contacts

dry contacts support via auxiliary voltage taken from the switch

Robust fully aluminum housing (anodized, black) with cooling ribs on all sides, no fans and no holes – with an exception of the face plate. Cooling ribs are not bolted on the housing sides but casted together with the switch housing.35mm DIN-Rail mounted in accordance with EN 60715, (EN 50022). Different mounting positions of DIN-rail clip – on the back and on the side with possibility to turn the clip for vertical and horizontal switch mounting. Optional: wall mounting.Internal Log-file, SNMP Traps, Syslog massages, Alarm GroupsSpanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, MRP-Media Redundancy Protocol acc. to IEC 62439Integrated / No proxy server required / TCP port number can be set for WEB accessSCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etcUCA certified IEC 61850 Class A Device with ServerCapability, Data Modeling according to IEC 61850-90-4 and IEC 61850-7, GOOSE and MMS supportIEC 61850-3; EN 60950; EN 61000-6-4; EN 55022 Class A; EN 55011 Class A; EN 61131-2; EN 61000-4-2, Class 3; EN 61000-4-3; EN 61000-4-4, Class 4; EN 61000-4-5, Class 4; EN 61000-4-6IEC 61850-3; IEEE 1613; EN 61131-2; EN 60068-2-1; EN 60068-2-2, EN 60068-2-14 (Temperature); IEC 60870-2-2, Class C3/Ct2 (tmin), Class C3/Dt1 (tmax), Class Cm (mech.), Class C1 (3K5 %), EN 60068-2-30 (Humidity); EN 60068-2-6 (Vibration); EN 60068-2-27 (Shock); EN 60068-2-32 (Free Fall)LLDP support, CDP support, Cisco Identity Services Engine ISE compatibility> 500 000 hours / In accordance with IEC 617095 years






Warranty:Manufacturer:Product name code and name:Required PoE/PoE+ option:


Product picture:


Power inputs:

PoE input:


Network Interfaces:

2x redundant power inputs with 18…72V DC power range and typical power levels 24V DC, 48V DC and 60V DC1x power input with 46- 57V DC power range (typ. 48V DC for PoE)min. 13W / typ. 15W / max. 22W10 ms-40 … +85°C

-40 … +85°CDIN-rail or Wall MountingIP 3083 x 133 x 125mm1300 gIEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX, 100BASE-FXIEEE 802.3ab 1000BASE-TIEEE 802.3zIEEE 802.3x Flow ControlIEEE 802.3af and IEEE 2802.3at2x 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity (for each Port selectable)








Housing

Mounting type:

Warning Management:





2x RJ45 screened, impedance 100 ohm100 meter max.8x SFP Vario Slot 100/1000 BASE with Digital Diagnostic Monitoring (DDM) functionalityDepending on SFP-transceiver versionSD-Slot, MMC compliant, secure encrypted storage12x pin block (screw-on type) to connect non-IP based devices: 2x independent programmable 2A / 30V DC outputs



the switchRobust fully aluminum housing (anodized, black) with cooling ribs on all sides, no fans and no holes – with an exception of the face plate. Cooling ribs are not bolted on the housing sides but casted together with the switch housing.35mm DIN-Rail mounted in accordance with EN 60715, (EN 50022). Different mounting positions of DIN-rail clip – on the back and on the side with possibility to turn the clip for vertical and horizontal switch mounting. Optional: wall mounting.Internal Log-file, SNMP Traps, Syslog massages, Alarm GroupsSpanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, MRP-Media Redundancy Protocol acc. to IEC 62439Integrated / No proxy server required / TCP port number can be set for WEB accessSCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etcUCA certified IEC 61850 Class A Device with ServerCapability, Data Modeling according to IEC 61850-90-4 and IEC 61850-7, GOOSE and MMS supportIEC 61850-3; EN 60950; EN 61000-6-4; EN 55022 Class A; EN 55011 Class A; EN 61131-2; EN 61000-4-2, Class 3; EN 61000-4-3; EN 61000-4-4, Class 4; EN 61000-4-5, Class 4;








EN 61000-4-6IEC 61850-3; IEEE 1613; EN 61131-2; EN 60068-2-1; EN 60068-2-2, EN 60068-2-14 (Temperature); IEC 60870-2-2, Class C3/Ct2 (tmin), Class C3/Dt1 (tmax), Class Cm (mech.), Class C1 (3K5 %), EN 60068-2-30 (Humidity); EN 60068-2-6 (Vibration); EN 60068-2-27 (Shock); EN 60068-2-32 (Free Fall)LLDP support, CDP support, Cisco Identity Services Engine ISE compatibility> 500 000 hours5 years / In accordance with IEC 61709

Manufacturer:Product name code and name:

Nexans88306428 Nexans iGigaSwitch 1008 E+ SFP-8VI PRO4

Product picture:

8.1.8 Detailed requirements for managed compact ruggedized Ethernet switches – 6x gigabit ports models: 4x RJ45 + 2x SFP uplink

Power inputs:

Power consumption:Temperature range (operating):Temperature range (storage):Mounting:Dimensions [WxHxD]:Weight:Standards:

1x power input with 46…57V DC power range and typical power levels 54V DCStandby 2.8W / typ. 4.3W / fully connected. 5.1W-25 … +65°C

-25 … +85°CSnap In / DIN-rail or wall with optional mounting kits90 x 45 x 70mm290 gIEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX, 100BASE-FX






Network Interfaces:

Twisted Pair ports:

Twisted Pair Link Length:Fiber Optic uplink ports:



Memory Card Interface:I/O interfaces (entry contacts):Housing

Mounting type:

Warning Management:



Multiple security features:Standards:

IEEE 802.3ab 1000BASE-TIEEE 802.3zIEEE 802.3x Flow ControlIEEE 802.3af and IEEE 2802.3at4x 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity (for each Port selectable)4x RJ45 screened ports located on rotatable module/head which should be able to turn for horizontal or vertical mounting positions, impedance 100 ohm100 meter max.2x SFP Vario Slot 100/1000 BASE with Digital Diagnostic Monitoring (DDM) functionalityDepending on SFP-transceiver version4x PoE+ ports / up to 30W per port / 120W power budget for 4x ports in accordance with IEEE 802.3atPSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6120 Watts / 4 portsFull PoE+ range acc. to IEEE 802.3at on 4x RJ45 portsMicro SD-Slot, secure encrypted storage2pin / Free programmable input contacts with alarm functionRobust fully metal housing (zinc diecasting / stainless steel), no fans.Snap in installation in standard 45mm cable ducts, floor boxes or with optional mounting kits on 35mm DIN-Rail or wallInternal Log-file, SNMP Traps, Syslog massages, Alarm GroupsSpanning Tree, Rapid Spanning Tree, Multiple Spanning TreeIntegrated / No proxy server required / TCP port number can be set for WEB accessSCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etcEN 60950 (Electrical safety - IT equipment), EN 55022 (EN 60950 Electrical conditions - EMC), CE, IEEE 802.3x (Flow Control), IEEE 802.1AB (LLDP), IEEE 802.1D (MAC Bridges),







IEEE 802.1D (Rapid Spanning Tree Protocol), IEEE 802.1D (Class of Service), IEEE 802.1X (Port-Based Network Access Control), ANSI/TIA-1057 (Link Layer Discovery Protocol for Media Endpoint Devices), ISO/IEC 15802-3 (Media Access Control Bridges)LLDP support, CDP support, Cisco Identity Services Engine ISE compatibility> 750 000 hours / In accordance with IEC 617092 years


Nexans88303959 Nexans GigaSwitch V5 SFP-2VI 48/54V DC IND

Product picture:

8.1.9 Detailed requirements for managed compact ruggedized Ethernet switches – 6x gigabit ports models: 4x RJ45 + 1x RJ45 uplink + 1x SFP uplink

Power inputs:

Power consumption:Temperature range

1x power input with 46…57V DC power range and typical power levels 54V DCStandby 2.8W / typ. 4.3W / fully connected. 5.1W-25 … +65°C






(operating):Temperature range (storage):Mounting:Dimensions [WxHxD]:Weight:Standards:

Network Interfaces:

Twisted Pair ports:

Twisted Pair Link Length:Twisted Pair uplink ports:

Fiber Optic uplink ports:



Memory Card Interface:I/O interfaces (entry contacts):Housing

Mounting type:

Warning Management:

-25 … +85°CSnap In / DIN-rail or wall with optional mounting kits90 x 45 x 70mm290 gIEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX, 100BASE-FXIEEE 802.3ab 1000BASE-TIEEE 802.3zIEEE 802.3x Flow ControlIEEE 802.3af and IEEE 2802.3at4x 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity (for each Port selectable)4x RJ45 screened ports located on rotatable module/head which should be able to turn for horizontal or vertical mounting positions, impedance 100 ohm100 meter max.1x RJ45 10BASE-T/100BASE-TX/1000BASE-T, FDXAuto-Negotiation, Auto-Crossover and Auto-Polarity1x SFP Vario Slot 100/1000 BASE with Digital Diagnostic Monitoring (DDM) functionalityDepending on SFP-transceiver version4x PoE+ ports / up to 30W per port / 120W power budget for 4x ports in accordance with IEEE 802.3atPSE function acc. to IEEE 802.3at mode A/ data pairs 1-2, 3-6120 Watts / 4 portsFull PoE+ range acc. to IEEE 802.3at on 4x RJ45 portsMicro SD-Slot, secure encrypted storage2 pin / Free programmable input contacts with alarm functionRobust fully metal housing (zinc diecasting / stainless steel), no fans.Snap in installation in standard 45mm cable ducts, floor boxes or with optional mounting kits on 35mm DIN-Rail or wallInternal Log-file, SNMP Traps, Syslog massages, Alarm








Multiple security features:Standards:


GroupsSpanning Tree, Rapid Spanning Tree, Multiple Spanning TreeIntegrated / No proxy server required / TCP port number can be set for WEB accessSCP, SSHv2, HTTPS, RADIUS, SNMPv3, IEEE 802.1X etcEN 60950 (Electrical safety - IT equipment), EN 55022 (EN 60950 Electrical conditions - EMC), CE, IEEE 802.3x (Flow Control), IEEE 802.1AB (LLDP), IEEE 802.1D (MAC Bridges), IEEE 802.1D (Rapid Spanning Tree Protocol), IEEE 802.1D (Class of Service), IEEE 802.1X (Port-Based Network Access Control), ANSI/TIA-1057 (Link Layer Discovery Protocol for Media Endpoint Devices), ISO/IEC 15802-3 (Media Access Control Bridges)LLDP support, CDP support, Cisco Identity Services Engine ISE compatibility> 750 000 hours / In accordance with IEC 617092 years


Nexans88303856 Nexans GigaSwitch V3 TP SFP-I 48/54V IND ES3

Product picture:






8.2 General requirements for industrial power supplies

Industrial power supplies have to be supplied by the same vendor as the industrial Ethernet switches.

DIN-rail mounted industrial power supplies must have compact design, 1 phase, that complies with the EMC directive and is designed to withstand extreme ambient temperatures and stresses in industrial environments. Those power supplies must be suitable to supply enough power for chosen industrial Ethernet switches and devices connected to the switches, in case they have to be powered by using PoE or PoE+ technologies.

8.2.1 Detailed requirements for DIN-rail mounted industrial power supplies – 110/220V 48V DC 100W

Input Voltage:Output Voltage:Power Output:Temperature Range (operation):Temperature Range (start-up):Temperature Range (storage):MTBF:Mounting:Dimensions [WxHxD]:Features:

85 ... 264V AC / 95 ... 250V DC48V DC (selectable, 30…56V DC)typ. 100 Watts-25 … +70°C (> 55°C derating)

-40 … +70°C-40 … +85°C>1.000.000 hoursDIN-rail or Wall Mounting90 x 90 x 61 mmshort circuit and over voltage protection, selectable output voltage, suitable for parallel connection, wide range input, suitable for PoE

Manufacturer:Product name:Product code:

NexansNexans iPowerSupply S 115-230VAC/48V DC 100W88645960






Product picture:


Input Voltage:Output Voltage:Power Output:Temperature Range (operation):Temperature Range (start-up):Temperature Range (storage):MTBF:Mounting:Dimensions [WxHxD]:Features:

85 ... 264V AC / 95 ... 250V DC48V DC (selectable, 30…56V DC)typ. 100 Watts-25 … +70°C (> 55°C derating)

-40 … +70°C-40 … +85°C>897.000 hoursDIN-rail or Wall Mounting90 x 90 x 61 mmshort circuit and over voltage protection, selectable output voltage, suitable for parallel connection, wide range input, suitable for PoE








Product picture:


Input Voltage:Output Voltage:Power Output:Temperature Range (operation):Temperature Range (storage):MTBF:Mounting:Dimensions [WxHxD]:Features:

85 ... 264V AC24V DCtyp. 30 Watts-25 … +70°C (> 55°C derating)

-40 … +85°C>1.000.000 hoursDIN-rail or Wall Mounting22.5 x 90 x 84 mmcompact design, short circuit and over voltage protection, wide range input








Product picture:




-40 … +85°C>1.000.000 hoursDIN-rail or Wall Mounting35 x 90 x 84 mmcompact design, short circuit and over voltage protection, wide range input








Product picture:




-40 … +85°C>1.000.000 hoursDIN-rail or Wall Mounting60 x 130 x 152.5 mmcompact design, short circuit and over voltage protection, wide range input








Product picture:




-40 … +85°C>1.000.000 hoursDIN-rail or Wall Mounting115 x 130 x 152.5 mmcompact design, short circuit and over voltage protection, wide range input








Product picture:

8.3 General requirements for optical SFP transceivers

Optical SFP transceivers should be supplied by the same vendor as for industrial Ethernet switches.Chosen Optical SFP transceivers should have industrial specifications and have wide operating temperature range (using the SFP transceivers with operating temperature range from less than -20…+85oC is not allowed). The SFP transceivers should be hot-swappable have digital diagnostic and monitoring (DDM) interface and support optical parameters monitoring in accordance with the requirements if SFF-8472 standard. Those transceivers should comply with SFP MSA (Multi-Source Agreement) and SFF-8472 requirements. All transceivers should comply with Class I Laser Safety requirements in accordance with the international IEC 825 standard.

Chosen vendor has to confirm the availability of SFP transceivers are compatible with the following vendors: Cisco, HP, Alcatel-Lucent, H3C, Juniper and Huawei.

8.3.1 Detailed requirements for SFP transceivers – 100Mbps, multimode, dual fibre, LC, 2km

Fibre type:Connector type:Operating temperature range:Wavelength (RX/TX):DDM support:Output optical power:Receiver sensitivity:Optical budget:

MultimodeLC-duplex-40 … +85oC1310/1310 nmYesmin. -19 dBm / max. -14 dBmmin. -31 dBm / max. -14 dBmmin. 12 dB






Link length:Latch color:

2000 mBlack


NexansNexans SFP 100 Transceiver GI(LC)E88646010

Product picture:

8.3.2 Detailed requirements for SFP transceivers – 100Mbps, singlemode, dual fibre, LC, 10km

Fibre type:Connector type:Operating temperature range:Wavelength (RX/TX):DDM support:Output optical power:Receiver sensitivity:Optical budget:Link length:Latch color:

SinglemodeLC-duplex-40 … +85oC1310/1310 nmYesmin. -15 dBm / max. -8 dBmmin. -31 dBm / max. -5 dBmmin. 16 dB10 000 mBlue


NexansNexans SFP 100 Transceiver SM(LC)E L1088646011






Product picture:



SinglemodeLC-duplex-40 … +85oC1310/1310 nmYesmin. -5 dBm / max. 0 dBmmin. -35 dBm / max. -3 dBmmin. 30 dB40 000 mBlue



Product picture:








SinglemodeLC-duplex-40 … +85oC1550/1550 nmYesmin. -5 dBm / max. 0 dBmmin. -35 dBm / max. -3 dBmmin. 30 dB80 000 mGreen



Product picture:

8.3.5 Detailed requirements for SFP transceivers – 100Mbps, singlemode, SF3, BiDi, single fibre, LC, 10km

Fibre type:Connector type:Operating temperature range:

SinglemodeLC-simplex-40 … +85oC






Wavelength (RX/TX):DDM support:Output optical power:Receiver sensitivity:Optical budget:Link length:Latch color:

1310/1550 nmYesmin. -17 dBm / max. -5 dBmmin. -31 dBm / max. -8 dBmmin. 14 dB10 000 mBlue


NexansNexans SFP 100 Transceiver SF3(LC)E L1088645914

Product picture:



SinglemodeLC-simplex-40 … +85oC1550/1310 nmYesmin. -17 dBm / max. -5 dBmmin. -31 dBm / max. -8 dBmmin. 14 dB10 000 mYellow








Product picture:



SinglemodeLC-simplex-40 … +85oC1310/1550 nmYesmin. -5 dBm / max. -0 dBmmin. -35 dBm / max. -3 dBmmin. 30 dB40 000 mBlue








Product picture:



SinglemodeLC-simplex-40 … +85oC1550/1310 nmYesmin. -5 dBm / max. 0 dBmmin. -35 dBm / max. -3 dBmmin. 30 dB40 000 mYellow








Product picture:

8.3.9 Detailed requirements for SFP transceivers – 1000Mbps, multimode, dual fibre, LC, 550m


MultimodeLC-duplex-20 … +85oC850/850 nmYesmin. -9 dBm / max. -4 dBmmin. -18 dBm / max. 0 dBmmin. 9 dB550 mBlack


NexansNexans SFP 1000 Transceiver GI(LC)E88646015






Product picture:



SinglemodeLC-duplex-40 … +85oC1310/1310 nmYesmin. -9 dBm / max. -3 dBmmin. -21 dBm / max. -3 dBmmin. 12 dB10 000 mBlue



Product picture:








SinglemodeLC-duplex-40 … +85oC1310/1310 nmYesmin. -4 dBm / max. 0 dBmmin. -23 dBm / max. -3 dBmmin. 19 dB40 000 mBlue



Product picture:


Fibre type:Connector type:Operating temperature range:Wavelength (RX/TX):DDM support:

SinglemodeLC-duplex-40 … +85oC1550/1550 nmYes






Output optical power:Receiver sensitivity:Optical budget:Link length:Latch color:

min. 0 dBm / max. 4 dBmmin. -24 dBm / max. -3 dBmmin. 24 dB80 000 mGreen



Product picture:



SinglemodeLC-duplex-40 … +85oC1550/1550 nmYesmin. 0 dBm / max. 5 dBmmin. -29 dBm / max. -10 dBmmin. 29 dB120 000 mGreen








Product picture:



SinglemodeLC-simplex-40 … +85oC1310/1550 nmYesmin. -9 dBm / max. -3 dBmmin. -21 dBm / max. -3 dBmmin. 12 dB10 000 mBlue



Product picture:








SinglemodeLC-simplex-40 … +85oC1550/1310 nmYesmin. -9 dBm / max. -3 dBmmin. -21 dBm / max. -3 dBmmin. 12 dB10 000 mYellow



Product picture:


Fibre type:Connector type:Operating temperature range:Wavelength (RX/TX):

SinglemodeLC-simplex-40 … +85oC1310/1550 nm






DDM support:Output optical power:Receiver sensitivity:Optical budget:Link length:Latch color:

Yesmin. -4 dBm / max. 0 dBmmin. -23 dBm / max. -3 dBmmin. 19 dB40 000 mBlue



Product picture:


Fibre type:Connector type:Operating temperature range:Wavelength (RX/TX):DDM support:Output optical power:Receiver sensitivity:Optical budget:Link length:

SinglemodeLC-simplex-40 … +85oC1550/1310 nmYesmin. -4 dBm / max. 0 dBmmin. -23 dBm / max. -3 dBmmin. 19 dB40 000 m








Product picture:

8.4 General requirements for memory cards for industrial Ethernet switches

To ensure full compatibility, the memory cards should be supplied by the same vendor as the chosen vendor for industrial Ethernet switches.

The memory cards should be used as redundant storage of industrial Ethernet switches configuration. Those cards should have SD format, be encrypted in accordance with AES256 requirements, have wide temperature range -40 ... +70оС and be hot-pluggable (replacing a memory card without shutting down the system).

To make the network maintenance and upgrade process easier, memory cards should a have unique MAC-address fixed on it. The MAC-address record should be protected from any changes.

In the case of MRP protocol (Media Redundancy Protocol according to IEC 62439) usage by industrial Ethernet switches, chosen memory cards should be equipped with a MRP multi license to activate this protocol.

Industrial Ethernet switches should have the following options to manage SD memory card slot usage: Enabled / Disabled /Permanently Disabled. In case of switch power-up, the priority should be given to the memory card slot.

8.4.1 General requirements for memory cards for industrial Ethernet switches – SD Memory Cards with MAC-Address






Storage:Memory:MAC-address record:Storage Duration:Dimensions:Operating temperature range:Storage temperature range:

Secure Digital formatmin. 64 MByteProtected unique MAC address record> 5 years32 x 24 x 1.4 mm-40 … +85oC-40 … +85oC

Manufacturer:Product name:

Product code:

NexansNexans SD Memory Card for iGigaSwitch with MAC-Address88300692

Product picture:

8.4.2 General requirements for memory cards for industrial Ethernet switches – SD Memory Cards with MAC-Address and MRP multi license

Storage:Memory:MAC-address record:MRP multi license:Storage Duration:Dimensions:Operating temperature range:Storage temperature range:

Secure Digital formatmin. 64 MByteProtected unique MAC address recordYes> 5 years32 x 24 x 1.4 mm-40 … +85oC-40 … +85oC

Manufacturer:Product name:

Product code:

NexansNexans SD Memory Card for iGigaSwitch with MAC address and MRP-Multi license88300694






Product picture:

8.4.3 General requirements for memory cards for ruggedized Ethernet switches – SD Memory Cards with MAC-Address

Storage:Memory:MAC-address record:Storage Duration:Dimensions:Operating temperature range:Storage temperature range:

Micro Secure Digital formatmin. 64 MByteProtected unique MAC address record> 5 years32 x 24 x 1.4 mm-40 … +85oC-40 … +85oC


NexansNexans micro SD memory card for GigaSwitch V3 IND88300691

Product picture:






8.5 General requirements for configuration and maintenance software for industrial Ethernet switches

To make the process of industrial Ethernet switches configuration and maintenance easier, switch manufacturer has to provide the software packages which does not require CLI knowledge and is designed with clear intuitive graphical user interface (GUI) based on the switches functionality tree, different tabs and drop-down menus with detailed switch configuration parameters for each functionality.

The vendor has to be able to provide such software package with client-server architecture.

The software package license should be provided per company.

The software package license should be provided per one working station.

Offered software package have to offer the following functionalities:

Switches configuration and maintenance:

Software architecture:Auto discovery functionality:

Configuration and firmware updates:

Master configuration functionality:

Software package for high number of industrial switches centralized configuration and management – not less than several thousand switches.Client-server basedThrough the automatic discovery feature in layer 2 , all switches which are part of the same network segment should be automatically detected. Alternatively, a layer 3 automatic discovery should be performed to discover the devices in different networks segments.The software should have the functionality of a quick and comfortable simultaneous configuration and firmware updates, even in the case of handling of huge number of devices. Time scheduled updates should be possible.Master configuration should provide a simple and efficient way to create and distribute switch master configurations. A master configuration should be used to distribute uniform basic settings to one or more switches from a switch list. It should be possible to choose which parameters will be disseminated. There should be a possibility to save master configuration for each depart-ment, in case they require different settings.






General functionality:

Access and access rights:

Integration into higher level management systems:

The software package should allow creating any number of master configurations. Creating any number of different device groups by

using different criteria Real time connected devices monitoring Real time diagnostic and monitoring information of

SFP-modules in switch systems Setting automated reaction scenarios on different

network events for different devices and groups Storage of device configurations in the software

database on the PC or on a central server Old device configurations storage via history function

in the software database Individual selection of storage locations for device

lists, database, master configurations and firmware Reset of error and statistics counters for one or more

devices Comprehensive information on update and progress in

a log window Information from the log windows should be available

for later analysis The functionality for importing of device lists as CSV

(comma/semicolon separated) files, e.g. from NSCM or Excel

Access via SCP (Secure Copy Protocol) as well as reading and writing of device configurations via SCP or TFTP

Credentials protect reading and writing of device configurations

Different access rights for different accounts or departments

The software package should have an easy way for the integration into higher level centralized management systems like SNMPc, HP-BTO, Cisco and others. In such case the device list should be bypassed and the device-editor should be started directly from that software. GUI based on the switches functionality tree, different

windows and drop down menus with detailed switch






Graphical user interface (GUI): configuration setup for each function. Using this software package shouldn’t require CLI knowledge.

Device list based functionality with easy access to all switches and its parameters

Assignment of the devices via Drag & Drop functionality

Recursive counting of devices within the category Labeling of category by incoming alarms in main or in

the sub category The devices should be permanently polled and marked

in the device list with corresponding colors Devices with alarm messages should be automatically

shifted to the top of the list Sorting of device list by IP address, MAC addresses,

device name and software version The functionality of direct access to CLI or WEB

interface from the configuration editorManufacturer:Product code and name:

Nexans88301908 NEXMAN Switch Manager Single License88301909 NEXMAN Switch Manager Company License88301920 NEXMAN Device Manager Client-Server License

Product picture:






8.6 General requirements for support services for industrial Ethernet switches

To maximize the efficiency of industrial Ethernet switches configuration and maintenance process and to speed up responses to support requests, chosen vendor has to provide its support services also. The support services have be offered as yearly chargeable service contract. Such contract should include remote support, preferential processing of requests, switches configuration analysis, interoperability support, etc.

As an option, minimum one full day training should be available for the customer and system integrator. Such training should provide the knowledge required for configuration and reliable handling of chosen industrial Ethernet switches, clear information about its hardware and software features, as well as related accessories.

8.6.1 General requirements for industrial Ethernet switches “starting” support packageThe following options have to be included in the “basic” support package:

Remote Management Introduction

Analyzing the switches configuration

Interoperability

Preferential Response to Requests

Basic techniques for using industrial Ethernet switches configuration and maintenance software to manage the network in the best possible way.

Vendor support experts, together with the experts of the customer or system integrator should analyze installed industrial Ethernet switch configuration and fine-tune it to specific requirements present on the site.

Industrial Ethernet switches vendor has to provide support for questions relating to third-party interoperability. In case of an issue, the vendor has work on a solution with the experts of the customer or system integrator.

All communication linked to industrial Ethernet switches support should be done by using preferential email






Remote Support

Support Hours

address.

The basic option of support contract has to include a minimum of 10 hours of remote support that is available for the contractual year via e-mail, phone or TeamViewer. The time should be calculated in 15-minute segments.

Vendor’s support specialists have to be available during vendor’s business hours: Monday to Friday, from 08:00 am to 04:00 pm of support office time.

Picture:

8.6.2 General requirements for industrial Ethernet switches “extended” support packageThe following options have to be included in the “extended” support package:

Remote Management Introduction

Analyzing the switches configuration

Interoperability

Clear techniques for using industrial Ethernet switch configuration and maintenance software to manage the network in the best possible way.

Vendor support experts, together with the experts of the customer or system integrator should analyze installed industrial Ethernet switch configuration and fine-tune it to specific requirements present on the site.

Industrial Ethernet switches vendor has to provide support for questions relating to third-party interoperability. In case of an issue, the vendor has work on a solution together with the experts of the customer or system integrator.






Preferential Response to Requests

Dedicated phone number and email address

Response and issue resolving times

Unlimited remote Support

Support Hours

Access to pre-release manager and firmware versions

Enhanced network management training

Enhanced Support Portal Content

The support requests have to be processed by high priority support staff.

All communication linked to industrial Ethernet switches support should be done by using preferential dedicated email address and priority support phone number.

The vendor has to guarantee the following response and issue resolving times to customers with Support Contracts: Response time (minor/major): 1 / 1 working day Workaround Solution (minor/major): 10 / 3 working

days Corrective Patch (minor/major): 180 / 20 working days

All costs of remote support over e-mail, phone and TeamViewer have to be included in extended support contract.

Vendor’s support specialists have to be available during vendor’s business hours: Monday to Friday, from 08:00 am to 04:00 pm of support office time.

Upon request, the vendor has to provide an access to pre-release versions of industrial Ethernet switch configuration and maintenance software and firmware.

Extended option of support contract should include network management training with no extra costs.

The vendor has to provide an access to security update information, configurations guides and the FAQ section.

Picture:






8.7 General requirements for industrial switches mounting accessories

For different cases of industrial Ethernet switches installation, the vendor has to provide additional mounting accessories.

8.7.1 General requirements for 19” 3HU DIN-rail mounting kits for managed industrial Ethernet switches

To install industrial Ethernet switches and other equipment (including DIN-rail mounted cabling connectivity) in 19" environment, the switch vendor has to offers special DIN-rail mounting kit. Such mounting kit has to be made from metal and has robust design to meets challenging demands of industrial, utility and military network applications.

The vendor has to offer 3HU variant of such mounting kit but higher variants (4, 5 or 6 HU) have to be available as well.

Each mounting kit has to be equipped with a cable management guide and a 32mm DIN-rail. The construction of offered mounting kit has to provide the possibility to change the position of the DIN-rail depth and height.

Construction

Width / height

Dimension (WxHxD)

Designed for industrial applications

19”/ 3HU

485 x 132 x 210mm






Weight

DIN-rail

Cable management

Material

1400g

Integrated with possibility to change depth and height

Integrated cable management guide

MetalManufacturer:Product name:Product code:

NexansNexans 19” DIN-rail mounting kit, 3HU, 49x132x21, metal88646039

Product picture:

8.7.2 General requirements for DIN-rail mounting kits for managed compact ruggedized Ethernet switches

To install ruggedized compact Ethernet switches in DIN-rail environment, the switch vendor has to provide special universal adapters. The mounting sets have to be fully made from metal, equipped with metal DIN-rail and holders with 45x90mm form factor and allow the tool-free installation of offered switches.

Construction

Width / height

Dimension (WxHxD)

Designed for industrial applications

19”/ 3HU

485 x 132 x 210mm






Weight

DIN-rail

Cable management

Material

1400g

Integrated with possibility to change depth and height

Integrated cable management guide

MetalManufacturer:Product name:Product code:

NexansNexans DIN-rail mounting kit 45x90 GSW metal88646199

Product picture:


· web view2x redundant power inputs with 18…72v dc power range and typical power levels 24v dc,...

Documents