W A R E H O U S E S O L U T I O N S

Superlative use of your warehouse space

Let us help you design your success – maximize space and increase productivity

If you are looking to repurpose, design or fit-out your warehouse, ABW MARK Warehouse Solutions can design, supply and install the right solution to optimize your operations.

Our team of experienced professionals can be leveraged to help improve your operation, enhance efficiency and reduce warehousing costs. We will work with you to integrate your unique requirements to design the most functional, high density and safe storage and racking system available. We integrate quality storage and material-handling equipment from the most reliable manufactures then install and manage the complete turnkey project. we can help you maximize space and lower maintenance costs to achieve the highest return on your investment.

Our services include warehouse designs, fit-outs, refits, racking inspections, repairs and all forms of storage including pallet racking, shelving and partitioning. We supply and install all forms of warehouse racking and shelving, mezzanine floors, partitioning and suspended ceilings.

W A R E H O U S E S O L U T I O N S

1

W A R E H O U S E S O L U T I O N S

2

What warehouse solutions and services do we offer?

We can design, source, install and maintain every aspect of your warehouse from designing the warehouse layout, to scoping your pallet racking, specifying your mezzanine flooring requirement and complete installation and commissioning.

What we offer:

FULL SITE SURVEYS USING THE LATEST MEASUREMENT EQUIPMENT

FULL PROJECT MANAGEMENT FROM START TO FINISH INCLUDING BUILDING REGULATIONS AND PLANNING

W A R E H O U S E S O L U T I O N S

3

PALLET RACKING SYSTEMS

Selective pallet racking

Pallet racking systems allow direct storage and access to every pallet. Selective pallet racking systems are designed using two basic components; welded vertical end frames and one-piece interlocking horizontal beams. Beams engage into frames on 3” increments and come standard with safety clips to prevent disengagement from frames. All our suppled racking systems are designed and manufactured in accordance with applicable regulations and specifications

1/ The frame

2/ The footplate

3/ The beam

4/ The pick & deposit station

5/ The pallet support bar

6/ The container support

7/ The frame protector

8/ The upright protector

9/ The corner protector

10/ Fall through protection

Type Width Depth

PNFB 12, 13 85 65 PLFB 15, 16 100 65PLFB 17, 18 120 65PLFB 29, 30, 31, 32 120 92PLFB 33, 34, 35 140 92

PNB 0486 60 50 PNB 0488 80 50PNB 0480 100 50PNB 0471 110 50PNB 0472 120 50 PNB 0485 125 50

Type Width Depth

The BeamsSeveral types of beams are available, to suit all possible configurations:

The cold-formed tube beam

WAREHOUSE IINFRASTRUCTURE SOLUTIONS:

W A R E H O U S E S O L U T I O N S

4

PNB 0441 110 50 PNB 0442 120

130140145160

50PNB 0443 50PNB 0444 50PNB 0445 50 PNB 0446 50

Type Width Depth

The Box – Beam

The Shelf - Beam of picking Levels

LIGHT LOADS HEAVY LOADS The footplate and leveling plate The container support

The pallet support bar The row spacer the sprinkler system The pick and deposit station

The braced racking Top-tied racking Very narrow aisle racking

W A R E H O U S E S O L U T I O N S

5

DRIVE IN High quality pallet storage system for optimized storage space.

RACK PROTECTIONProtection of the racking against collision from a fork lift truck is

important. The expected lifetime will be extended and repairs

limited. A number of basic protectors are available and for specific

applications dedicated protectors have been developed, for

example fall through protectors.

The corner protector The frame protector The upright protector Push through protectors

Specific Customized

1/ The frame (upright)2/ The top-beam3/ The pallet rail4/ The support arm5/ The entry on the pallet rail6/ The ground guidance7/ The entry on the ground guidance8/ The back-bracing9/ The back-stop

W A R E H O U S E S O L U T I O N S

6

DRIVE IN RAIL DESIGN

Drive in arm The drive in ground rail design Middle or end stops

Drive in configurationThe clearances for the pallets and the handlingtrucks are very important and must comply withFEM-regulations.

Dimensions: according FEM 10.3.02

a1 ≥ 75 mma2 ≥ 50 mma3 ≥ 50 mma4 ≥ 50 mma5 ≥ 20 mma6 ≥ 100 mma7 ≥ 75 mma8 ≥ 75 mmb1 ≥ 100 mm

DRIVE IN ARM DESIGNThe height partitioning can be set per drive-in lane: Pallet width = 1200 mmà Lane width = 1350 mm High and deep drive-in systems or for pallets with max. 50 mm overhang: an extra of 50 mm should be addedà Lane width = 1400 mm

W A R E H O U S E S O L U T I O N S

7

SHELVING

Mobile shelving

Small parts shelving

Systems are used for storing light to medium weight goods handled by hands and

suitable for use in office and warehouses. Modular design, easy to assemble with

adjustable shelf height.

MEZZANINE FLOORS

We provide quality mezzanine floors to help you achieve that extra space your

business needs. We provide a complete service, from initial quotation through to all

stages of mezzanine floor production: including design, building regulations approval,

manufacture and installation.

1/ Column2/ Main beam3/ Secondary beam4/ Beam connector5/ Bracing profiles6/ Floor: wooden decking / grating

DESIGNCHARACTERISTICS

Column Main beam Bracing Rigid connection Secondary beam

W A R E H O U S E S O L U T I O N S

8

CANTILEVER

Cantilever racking, usually used for storing lumber, pipes and commodities that are

not suitable for conventional racking systems. Cantilever are either roll formed or

made from structural steel. Made up from a few key parts including the base and

vertical column(s), along with arms and horizontal, cross bracing.

1/ Column IPE 140IPE 160IPE 180…IPE 330

2/ ArmI PE 80IPE 100IPE 120IPE 140IPE 160

3/ Vertical bracing4/ Levelling and anchoring

TECHNICAL CHARACTERISTICS

The column and foot are welded or bolted together. The cantilever racks can be used single or double sided. Column heights of up to 9 meter, perforated every 100mm (or 50 mm optional). Suitable for forklift and crane handling. Ground guidance can be provided as an option. The beams are bolted and adjustable per 100 mm, correspondingwith the sizes of the stored goods. Arm lengths from 600 to 2500 mm.

The arm end can be equipped with a removable front stop, integrated in the entry nose (option).

W A R E H O U S E S O L U T I O N S

9

Complete supply and implementation using our highly experienced installation team

Full compliance with all Health & Safety legislation

We offer complete solutions and expert advice for every warehouse and storage requirement.

You can rest assured that all our metal racking shelving, pallet shelving and racking storage items are manufactured with the highest quality. Whatever your pallet storage requirements and however big or small your warehouse space, our comprehensive range of pallet racking solutions can meet your needs.

We source our equipment from certified manufacturers who provide us and our end customers with Quality Management Certification

ISO 9001:2000 compliance UKAS Certification

Safety Standards

Dexion CompatibleEuropean Standards FEM 10.2.02 and 10.3.01Australian National Standards “AS4084:1993 Steel Storage Racking” and “AS1538 Cold Formed Steel Structure Code”

A solution for all your needs in what loading Systems stands for. We specialise in total solutions for loading and unloading with the emphasis on “total”. Regardless of the specific requirements , the basic principle of our service in we take care.

W A R E H O U S E S O L U T I O N S

10

we take care. One partner for all your needs

Sectional Doors Speed DoorsDock Levels

W A R E H O U S E S O L U T I O N S

O M A N

+ 9 6 8 9 8 8 7 0 8 4 9i n f o @ a b w m a r k . c o m

w w w . . c o m a b w m a r k