visual basic.net 1.getting started loading it up where to save
TRANSCRIPT
Visual Basic.NEThttp://www.homeandlearn.co.uk/NET/vbNet.html
1. Getting started• Loading it up• Where to save and
how to organize your projects.
2. Forms• From the menu bar,
click Debug• From the drop
down menu, click Start
• Or press the F5 key on your keyboard
• Click the Red X on the form to stop it from running.
3. Controls• Things like buttons,
textboxes, and labels are all things that you can add to your Forms. They are know as Controls, and are kept in the Toolbox for ease of use.
• You can pin the toolbox to keep it in view.
4. Adding controls to a form• Double click the textbox
tool (make 3 textboxes - what are textboxes used for?)
• Double click the label tool (make 3 labels - when would you use a label and when would you use a textbox tool?)
• Resize and line up
• Start your program to view
5. VB.NET Properties• What you are
looking at is a list of the properties that a form has: Name , BackColor, Font, Image, Text, etc.
• Just to the right of these properties are the values for them. These values are the default values, and can be changed.
Properties continued• Locate the word
"Text" in the Property box
• "Text" is a Property of Form1.
• Change the Text property to read “My First Project”
Control Properties• Click label1and then
click inside the area next to "Text” property, and delete the word "Label1" by hitting the backspace key on your keyboard
• Type in the words "First Name”
• Change Label2 to read “Last name.
• Change Label 3 to read “Phone number”
6. Consistent Programming
• Change the Name properties into:– frmName for Forms– lblName for labels– txtName for textboxes– cmdName for command buttons– picName for picture boxes
7. Variables• a variable is a storage area of the computer's
memory• Think of it like this: a variable is an empty
cardboard box.• The use of variables allows values to be represented by
meaningful names that make the program code easy to read.
1. A variable can only store one value at a time.Dim dblX As DoubledblX = 5.5dblX = 10• The value stored would be 10 as it was assigned last.
8. Option Explicit
• In the General section of each form, ensure that you turn Option Explicit On.
• This will catch many of your spelling errors.
9. Data Types
Type Prefix Used to RepresentShort sho Integer with no decimals up to 32, 767
Long lng Integer with no decimals which go over 2,147,438,648
Decimal dec Decimal of 29 digits
String str Represents a set of characters
Integer int Integer with no decimals up to 2,147,438,648
10. Declaring VariablesDim number1 As IntegerDim number 2 As Integer
number1 = 3number2 = 5
What does each part mean?Dim?As Integer?
Question
• What would be the final value of the variable dblResult?
dblNumber = 10
dblNumber = 2 * 3
dblResult = dblNumber * 2
11. Adding a Command Button
• New adding project
• Click on the button tool and change its text to read “Add Two Numbers”
• Change its property name to “cmdAdd”
• Make a label and clear its text.
• Change its property name to lblTotal
• Double click on the command button.• Private means that no other part of the program
can see this code except for our button.• The "Sub” (subroutine) word tells VB that some
code follows.• _Click ( ) The Click Event will runt the code.• End Sub The subroutine ends right here.
• Type the following in the command button click event.
Dim intNumber1 As IntegerDim intNumber 2 As IntegerDim intAnswer as Integer
intNumber1 = 3intNumber2 = 5
intAnswer = intNumber1 + intNumber 2
lblTotal.Text = intAnswer
12. Constants
• In the previous project, both intNumber1 and inNumber 2 did not have values that changed…so they would be constants.
• If they are constants, they should be declared as such.
• Declaring a constant variable is as simple asConst intNumber1 As Integer = 3• Declare constants before Dim statements
The Done Command Button
• Most programs have a “Done” button that ends the program.
• The code is
Unload Me
13. Mathematical Expressions
• Add = +• Subtract = –• Multiply = *• Divide = /• Integer Division = \ (how many times one number
goes into another)• Modular division = mod (returns the remainder
resulting from division only)• Power of 2 = ^2• Use brackets
Questions
• What is the value of intX?
Dim intX As Integer
intX = 20 Mod 7
• What is the problem with the following code?
Dim intX As Integer = 12
14. Dealing with Textboxes
• You have coded for 2 constants to be added together, when they are clicked.
• We want a person to be able to put in two numbers and then the computer to add then up and put the result in the label.
• Always have a variable assigned to a textbox• Example• dblNumber1 = txtNumber1.Text
• Add 2 textboxes to the form.• Label then txtNumber1 and txtNumber2• Ensure that the Text property is blank.• Have 2 variables = to the corresponding
textboxes.• Add the 2 variables together and equal to
the intAnswer variable• Display intAnswer in the lblTotal
15. Change Event Procedures
• The change event occurs when the user begins to type in a textbox.
Private Sub txtSide_Change()
lblAnswer.Caption = “”
16. Adding Images• From the toolbar click on the picture button• Either draw or double click on this button• Copy an image and paste into your folder.• Using the picture properties, find the picture on
your computer.• The image is True for being shown and False for
being invisible.• Add a smiley picture to your Adding form.• Call this picSmile in the properties of the picture
17. Form Load Event Procedure
• Double click on the white part of the form.
• Enter the code
picSmile.value = False
• What do you think will happen?
• To the command button, add the following code
picSmile.value = True
Review 2 Area Calculation
• Create a new project that calculates the area of a rectangle with 1 side 5 cm and the other side is 8 cm.
• Display this in a label.• Put a picture of an rectangle on the form
and have this form only show until a command button for the answer being clicked.
18. Message Box• Code for a pop up box
• Msgbox.Show(“Hello”)
• Or if you have a variable
• Msgbox.show(strName)
19. Option (Radio) Buttons• Adding Radio Buttons to a Form is exactly
the same process as adding a Checkbox.
• You must draw the option buttons in a group. Draw the group first.
• optName.Checked = True
Review 3
• Create a new project.
• You will need a label (lblMessage), and a command button (cmdDone).
• Add 3 option buttons inside the group. Rename these buttons optEnglish, optSpanish and optfrench. The captions should say each language.
• Double click on the optEnglish option button and add the following code
lblMessage.Caption = “Hello World”• Double click on the optSpanish option button and
add the following code
lblMessage.Caption = “Hola Mundo”• Double click on the optFrench option button and
add the following code
lblMessage.Caption = “Bonjour le monde”
• Add a form load event procedure
optEnglish.checked = True
Exercises 1-5
Part II Conditional Logic
• If…Then…End If
• If…Then…Else…End If
• If…Then…ElseIf…End If
• Select Case
20. If…Then statements• These are conditional logic statements.• If I eat the cake Then my diet will be ruined • If I don't eat the cake Then I will be on course for a
slimmer figure Or• If I eat the cake Then my diet will be ruined• Else• If I don't eat the cake Then I will be on course for a
slimmer figureOr• If I eat the cake Then my diet will be ruined• Else• My diet is not ruined
• Consider a number guessing game.• I pick a number between 1-10.If you guess the number then you are rightElse you are wrong.• Something should happen in both conditions,
either to let you know you are right or that you are wrong.
• For every If you need an End If to complete the condition.
• Dim strFirstName as String
• strFirstName = "Bill"
• If firstname = Bill ThenMsgBox.Show("firstname is Bill“)
ElseMsgBox.Show("firstname is not
Bill“)End If
• Note that the line after the If statement is indented. This is good programming.
Guessing Game Review • Make a new project.• Make a label that says “Guess a number between 1
– 10”.• Make a label that says “My Guess”• Beside the “My Guess” label make an empty
textbox for people to put there guesses.• Make a label that will say if you are correct or
incorrect.• Make a command button that will check your
number.• Make a command button that is a done button.
Check Boxes
• Select “GroupBox” from the Containers in the toolbox.
• Draw a rectangle on the form and rename to grpTV and change the text to say TV
• Click on CheckBoxes and draw 2 inside the GroupBox
• Using a GroupBox allows you to move all the checkboxes as once.
• If a checkbox has been selected, the value for the CheckState property will be 1; if it hasn't been selected, the value is zero
If CheckBox1.CheckState = 1 Then
MsgBox("Checked")
End If
Select Case
• Used when there is only a limited number of things that could be chosen.
Dim strCreamCake As StringDim strDietState As String
strCreamCake = txtTextBox1.Text (what is put in the textbox is stored)
Select Case strCreamCake (check variable)Case "Eaten“
strDietState = "Diet Ruined"Case "Not Eaten"
strDietState = "Diet Not Ruined"Case Else
strDietState = "Didn't check"
End SelectMsgBox strDietState
Ampersand
• The symbol “&” connects 2 bits of information• Dim strFirstName As String
Dim strLastName As StringDim strFullName As String
• strFirstName = "Bill"strLastName = "Gates"
• strFullName = FirstName & LastName• txtTextbox1.Text = FullName
Conditional Operators
Combo Boxes
• Double click the icon to add a Combo Box to your form. Or click once with the left hand mouse button, and then draw one on the form.
• A combo box is a way to limit the choices your user will have. When a black down-pointing arrow is clicked, a drop down list of items appears. The user can then select one of these options.
• Whatever is in the Textbox will be transferred to the variable
Dim strItems as String
strItems = cboItems.Text
Msgbox strItems
Loops
• You want to add up the numbers 1 to 4: 1 + 2 + 3 + 4. You could do it like this
Dim intAnswer As IntegerintAnswer = 1 + 2 + 3 + 4MsgBox intAnswer• Fairly simple, you think. And not much code, either. But
what if you wanted to add up a thousand numbers? Are you really going to type them all out like that? It's an awful lot of typing. A loop would make life a lot simpler.
• But don't get hung up too much on the name of the Loop. Just remember what they do: go round and round until you tell them to stop.
For LoopsDim intAnswer As IntegerDim intStartNumber As Integer
intAnswer = 0For intStartNumber = 1 To 4
intAnswer = intAnswer + intStartNumber
Next intStartNumberMsgBox intAnswer
• Use the following code to halt the program if there is nothing in a textbox.
Exit Sub
Do Loops
Dim intNumber as Integer
intNumber = 1
Do While intNumber < 5 MsgBox intNumberintNumber = intNumber + 1
Loop
Do Until
Do Until intNumber < 5MsgBox intNumberintNumber = intNumber + 1
Loop
Adding Menu’s
Coding for Menu’s
• Press F7 on your keyboard to go to the code window • Click the black arrow at the top, where it says General
• Rename the menu items• Use mnu as the prefix• Rename the ExitToolStripMenuItem to mnuExit• Bring up the code window by doubling clicking
on the mnuExit on the form
• Add Me.Close( )
• Run the program and see what happens when you click this in the menu
Open File Dialogue Box
Save File Dialogue Box
Show and Hide Controls
View Images Menu Button
Arrays
Text Files