vishnupuri, nanded (maharashtra state) pin …...day 2 day-3 date: 07.07.2016 session 1, 2, 3, 4...

Shri Guru Gobind Singhji

Institute of Engineering & Technology

Vishnupuri, Nanded (Maharashtra State) PIN 431606 INDIA

Tantra-Vaani A Collection of Reports of FDP’s conducted under TEQIP-II at SGGS IE&T Volume-I No. 8e-version available on : www.sggs.ac.in/TEQIP-II/Activityreports July-Sept 2016 Inspiration Hon. Baba Kalyani, Bharat Forge Ltd. Pune. Mentors Dr. SubhashBabu, IIT Bombay. Chief Patron Dr. Laxman M. Waghmare Editor: Dr. Anil B. Gonde Co-editors: Dr. Abhijeet V. Nandedkar Dr. Arun R. Patil

Fun-Learn-Prototype

Dr. Asutkar felicitated the guest in presence of Dr.Holambe, Dr. Waghmare during inauguration

Director's Message

The overall development of the

students is dependent on the teachers

‘skills pertaining to teaching,

evaluation, research, tutorship,

mentorship and guidance in line with

advancing technologies over current

real world challenges. The Faculty

Development programs under

TEQIP-II at SGGSIE&T, Nanded,

have been designed with the specific

goals of enhancing the technical and

soft skills of its participating

members. A few programmes are

intentionally designedto imbibe the

research instinct among the faculty

members of the institute and from

outside colleges.

A One Day Workshop on

Fun-Learn-Prototype 8

th August, 2015

One Day Workshop on Prototype Designing was held on August 8, 2015,

Organized by Department of Instrumentation Engineering at Shri Guru Gobind Singhji

Institute of Engineering & Technology, Vishnupuri, Nanded.The workshop started with

inauguration function in presence of Hon. Director Dr. L. M. Waghmare. The workshop

was planned and coordinated by Dr. R. S. Holambe. Eminent experts from different

organizations glorified the workshop.

The inaugural function of the workshop was held at 9.00 AM in I2 Lecture Hall

of the department, in presence of expert Mr. Ambadas Chaudhari, Senior Technology

Architect, Infosys, Pune, Satish Chandra, Deputy Project Director, Kolte Patil

Developers, Pune, Kiran Garje, Scientist 'D' DRDO Pune and Dr. L. M. Waghmare,

Director of the Institute, Dr. V. G. Asutkar, Head of the Department and Dr. R. S.

Holambe Workshop Coordinator. The workshop has two sessions dedicated for the

theoretical aspects and practical aspects respectively. During this workshop project

management, project organization, architecture work, prototype designing such huge area

was covered by the expertise.

Dr. L. M. Waghmare felicitated Mr.Nimsarkar Students attending the session by Mr. Nimsarkar

“Habit is the intersection of knowledge (what to do), skill (how to do), and desire (want to do).” - Stephen R. Covey. Page-1

https://www.linkedin.com/vsearch/p?f_G=in%3A7350&trk=prof-0-ovw-location

One Week STTP on

“Data mining using STATISTICA” 5

th-10

th July 2016

Department of Information and Technology organized a one week workshop on “Data mining using STATISTICA” during 5th

-10th

July 2016. Professional experts from StatSoft India Consultants / Trainers will conduct this six-days course which is designed to

provide the concepts and experience necessary to begin data exploration, data preparation, analytical modelling, and model

deployment problems using STATISTICA Data Miner. The course will focus on providing hands-on experience with the different

ways in which each of these problems can be solved.

Day-1 Date: 05.07.2016 Session 2, 3, 4

Vijay Gupta, data scientist, StatSoft, India & Rajat Srivastava, Statistician

In Second session of day 1 Vijay Gupta started with the basics of DATA Mining. How to start with STATISTICA AND overall over

view of STATISTICA

Third Session is based on how to import and export files in software, also introduction and basic of predictive analysis of

Data Acquisition: collection of data

Exploratory Analysis: Understand data ,missing values

Prepare data: Create new variable, select best variable for development of new model

Model development: Model is developed

evaluate model: Model is evaluated according to parameters like RMS value

Deploy model: Model is deployed

In fourth session of day 1 , deals with understanding of dataset, database, spredsheet format session end with reporting for analysis.

Day 1 : by Vijay Gupta

Day-2 Date: 06.07.2016 Session 1, 2, 3, 4


In first session of day 2 start with objective as a Introduction to several Data Preparation and Visualization Technique which basically

focus on

Recode Outliers and Process Missing Values

Sampling Techniques, Types of Sampling

In second session of day 2 a hands on practice on sampling techniques with different dataset present in STATISTICSA. In third

session of day 2 start with 2D,3D and Multivariate Graph, how to use this graph with software. Last session of day 2 include hands

on with plotting different graph with different parameter like skewness, kurtosis etc.

“Man often becomes what he believes himself to be. If I keep on saying to myself that I cannot do a certain thing, it is

possible that I may end by really becoming incapable of doing it. On the contrary, if I have the belief that I can do it, I

shall surely acquire the capacity to do it even if I may not have it at the beginning.” ― Mahatma Gandhi

Page-2

Day 2

Day-3 Date: 07.07.2016 Session 1, 2, 3, 4


In first session of day 3 start with objective to provide real time problem solution with STATISTICA

Descriptive Statistics:

Analysis of null hypothesis is done which is to be accepted or rejected according to p-value analysis-value is larger than 0.05 then

we cannot reject null hypothesis

In second session of day 3 start with very brief introduction of T-test then session move forward with T-test with Statistica.

In third session of day 3 gives what is use of T-test in

Single sample

Independent sample

Dependent sample

Last session of day 3 start with Annova and type of Annova like

One way annova,Two way annova and Multi annova

Day 3 end with Multiple Regression and Distributed and simulation

Re-sampling method,Montocarlo method and LHS method

Day 3

“Our future growth relies on competitiveness and innovation, skills and productivity... and these in turn rely on the

education of our people.” -- Julia Gillard

Page-3

Day-4 Date: 08.07.2016 Session 1, 2, 3, 4

Vijay Gupta, Data Scientist, StatSoft, India & Rajat Srivastava, Statistician

In first session of day 4 start with objective to provide Introduction to STATISTICA Data Miner's large selection of models for

statistical learning and their application to various real-world problems.

CART-CHAID and Automated Neural Network

General CHAID Introductory Overview

Basic Tree-Building Algorithm

Preparing Predictors

Automated Neural Network with Statistica and its advantages with it.

In second session of day 4 start with Text Mining with application of Text mining with current business trend also focus on

STATISTICA support on different text mining operations

In third session of day 4 gives link of using Statistica for K-Mean and EM clustering

Cluster analysis using 2D and 3D plot

Expectation Maximization Clustering simulation

Plotting Hierarchical Tree and how to study cluster graph made by STATISTICA

Last session of day 4 start on case study on standard dataset "Heart Disease.sta" by performing cluster operation on dataset predictive

result has been generated

Day 4

Day-5 Date: 09.07.2016 Session 1, 2, 3, 4

Vijay Gupta, Data Scientist-StatSoft India and Rajat Srivastava, Statistician

In first session of day 5 start with objective to learn various Multivariate Exploratory Techniques.

Cluster Analysis

Cluster analysis hands on session with Joining (Tree Clustering),k-Means Clustering,EM clustering. Clustering can deploy by using

STATISTICA graphically.

In second session of day 5 start with factor Analysis by using STATISTICA

How to perform factor analysis menus for it

Real time example on factor analysis

Definition method of factor extraction

Review descriptive statistics

In third session of day 5 on Principle Component Analysis (PCA)

By taking standard dataset performing PCA in STATISTICA and study the results of it

Study parameters like fitting methods, cross-validation specifications, v-fold, Krzanowski

Statistica approach for Standard deviations, Multivariate Statistical Process Control dialog box,QualityPlots,Advanced MD

Last session of day 4 in on PCA hands on.

“The five steps in teaching an employee new skills are preparation, explanation, showing, observation and supervision.” -

-Bruce Barton Page-4

Day 5

Day-6 Date: 10.07.2016 Session 1, 2, 3, 4

Vijay Gupta, Data Scientist, StatSoft, India & Rajat Srivastava, Statistician

In first session of day 6 start with objective to take experience using STATISTICA Data Miner's project workflow environment.

Data Mining Workspaces

Real time simulation and report generation demo through data mining workspace, all possible workspace with summary generation,

study of summary and plotting different graph

In second session of day 6 start modelling in workspaces Multiple model creation and comparison

Demo of all model in workspace

Comparison study made with learning how to read summarize it by using statistica

In third session focus on Data Mining Recipes(DMR)

STATISTICA Data Miner can produce prediction models in various formats like PMML,C++,JAVA and other common

programming languages

Hands on most sophisticated general analytic tool

Introduction to graphical tools of STATISTICA

Step by step deployment of DMR is at the end of session third

A group photograph of all the participants with experts

The five essential entrepreneurial skills for success: Concentration, Discrimination, Organization, Innovation and Communication. Harold S. Geneen

Page-5

TEQIP-II Sponsored and PSF, USA Funded One Week STTP (Interdisciplinary) on

“Python Programming” 12

nd- 17

th August 2016

In Collaboration With ITIE, Academy Bangalore

The Department of Information Technology has organized a One Week STTP on Python Programming during 12th

– 17th

August

2016 under TEQIP-II and funded by Python Foundation, USA in collaboration with ITIE Academy, Bangalore. Dr. B. M. Dabade

inaugurated the function along with Dr. A. B. Gonde and the chief guest Mr. Sanjeev Kubakaddi, ITIE Academy Bangalore.

Audience for inaugural function Prof. Pakle welcomed Dr. B. M. Dabade, Dr. Gonde and Mr. Sanjeev

The IT Dept. received USD 550 from PSF towards offsetting fees for registered students. Total number of participants registered

were 103 including Undergraduate students, Post Graduate students and Few Faculty members.

Programme Banner

The outstation participants on registration Counter

Day -1 Date: 12.08.2016 Session Time: 10.00 to 1.00.

Mr. Sanjeev Kubakaddi, ITIE Academy, Bangalore

Introduction To Python Programming

Mr. Sanjeev Kubakaddi started the session with instructions for installation of Enthought Canopy on Windows platform. He

conducted complete session on Hands-on. Mr. Sanjeev Kubakaddi started his lecture explain what is python, where it is used for, why

it is used for and what are the advantages of python over other languages, He described the scopes of python and how students can

use this in their final year projects. After that he started with basic programming with python, importance of indentation and the

errors that arise due to wrong indentation, how to print a statement or variable, Then he proceeded towards the various types of

operator python has. Arithmetic, comparison, membership etc.

All the participants were following Mr. Kubakaddi’s commands and very happy with the ease of using python commands

Introduction To Python Programming Session Time: 2.00pm to 5.00pm.

Mr. Sanjeev Kubakaddi started the 2nd

half of the session with some assignments regarding Assignment operators. Everybody were

doing their assignments very minutely and Mr. Sanjeev Kubbakaddi checked all the systems. The response was really very good. Mr.

Sanjeev Kubakaddi then started the various types of data types python has and explained them one by one. string, tuple, dictionary,

tuple etc. After explaining he went into the operations of the data types of the python like concatenation, extracting, modification etc.

the exceptional case of tuple was also discussed. All the participants were following Mr. Sanjeev Kubakaddi’s commands and he

concluded the session by giving a quick wrap up of the total day’s discussion.

“The skills you acquire can always be effectively redeployed. You will look back on setbacks and be grateful for the catalyst that came not a moment too soon”. --Tom Freston

Page-6

Participants in the first session

Mr. Sanjeev in his session on Basics of Python

Day -2 Date: 13.08.2016 Session Time: 10.00am to 1.00pm

Mr. Sanjeev Kubakaddi, ITIE Academy, Bangalore

Introduction To Python Programming Mr. Sanjeev Kubakaddi started the session with assignments in data types. Students were doing those very seriously.After the

completion of the assignments he started his lecture on Day 2 session by explain what decision making, loops is and loop control

statements and described its importance. The he moved to basic syntaxes of the various concepts –if else, if elif else, for, for else,

while, while else etc.After that he started explained various examples of the above said and the total session was on hands on. The

decision making, loops and loop control statement was concluded before lunch.

Introduction To Python Programming Session Time: 2.00pm to 5.00pm.

Mr. Sanjeev Kubakaddi handed over the session to Mr. Sauradip Roy. Mr. Sauradip Roy started the session with basic assignments in

loops and control. Students were very fast and enthusiastic.

After the completion of the assignments he started his lecture on functions by explain the basic concept of functions and described its

importance. Then he moved to basic syntaxes of the various concepts of user defined functions. He described the various types of

arguments of functions with examples and students were asked to do hands on.

Before concluding the session he gave some assignment to the students to do at home.

Participants in the Laboratory session

Participants in the Laboratory session


Mr. Sauradip Roy, ITIE Academy, Bangalore


Mr. Sauradip Roy started the session by checking the assignments given to the students last day. After the completion of the

checking of the assignments he started his lecture on Day 3 session by explain rest part of the functions namely the anonymous

functions with examples and gave two assignments to the students. They did it very with a great enthusiasm.After that he started

importance of libraries in python and how can one make his own library.And import it. The concept of module was taught and

students were given an assignment to make their own module before lunch. Before lunch the assignment was completed by the

students.

A winner is someone who recognizes his God-given talents, works his tail off to develop them into skills, and uses these skills to accomplish his goals. Larry Bird

Page-7

Session Time: 2.00pm to 5.00pm

Mr. Devil Chandrakant, ITIE Academy, Bangalore


Mr. Sauradip Roy started the 2nd

session by explain the concept of INPUT OUTPUT commands in python In this session main

importance was given to the I/O functions in the python and the session was full hands on explanation and example doing .how to

read, write, delete, change, take keyboard input, file attributes etc. was done in these session. Finally the day was concluded by the

total day wrap up in a nutshell.

Session 1 by Saurdip Roy

Session 2 by Saurdip Roy

Mr. Sanjeev Kubakaddi handed over the session to Mr. Sauradip Roy. Mr. Sauradip Roy started the session with basic assignments in

loops and control. Students were very fast and enthusiastic.After the completion of the assignments he started his lecture on functions

by explain the basic concept of functions and described its importance. Then he moved to basic syntaxes of the various concepts of

user defined functions. He described the various types of arguments of functions with examples and students were asked to do hands

on.Before concluding the session he gave some assignment to the students to do at home.




Mr. Sauradip Roy started the session by explaining the basic need of exception handling. After the completion of the explanation he

directly went to hands-on and showed the syntaxes of the try except and try-finally blocks. Followed by few examples and the list of

standard exception list. Then he moved to the concept of class and its attributes and the concepts of class inheritance, child-parent

relationship and overriding with hands on examples. Like last day assignment on class was given.


Mr. Devilal Chandrakant, ITIE Academy, Bangalore

Introduction To Numpy Mr. Devilal Chandrakant started the session with basic matrices and arrays concept and importance of numpy library in real world.

The total session was hands on and in this the basic array and matrix manipulation, defining of these data types and many more

concepts were done direct hands on.

Participants in a session by Mr. Devilal Participants in a session by Mr. Devilal

“No amount of skillful invention can replace the essential element of imagination.” ― Edward Hopper Page-8



Introduction To matplotlib

Mr. Sauradip Roy started the session by explain the importance of graphical plotting in current industry scenario. He explained the

basic commands that are used in matplotlib. After that direct hands on started with the students doing the plots as instructed by Mr.

Sauradip Roy from the scratch. Plotting a graph, showing, labelling, giving legend, subplots, colouring, attributes of the commands

etc. were taught. An assignment was given and the students did that hands on. After that some complex commands were taken like

pie and bar and they were explained hands on from scratch.


Mr. Devilal Chandrakant, ITIE Academy, Bangalore

Introduction To GUI using TKinter

Mr. Sauradip Roy started the session by explain the importance of graphical user interface and its scopes. He explained the basic

concepts and parts of GUI programming like root window, widgets, packing, anchoring, class concept in GUI.

After that direct hands on started with the students

creating the widgets as instructed by Mr. Sauradip

Roy from the scratch. Changing the attributes of the

GUI widgets, entering data and taking data to the

Widgets were taught. An assignment was given and the

students did that hands on. This session was very

interesting as the students were able to apply the

concepts of class practically here.Finally the day ended

by a quick wrap up and explaining scopes of GUI.

All the participants in a hands on session by Mr. Devilal

Day -6 Date: 17.08.2016 Session Time: 10am - 2pm

Mr. Saurdeep Roy, ITIE Academy, Bangalore

Introduction To Pandas

Mr. Devilal Chandrakant started the session with basics of data analysis and modelling and what all one can do with it using python

library pandas. The total session was hands on and in this the basic operations, automatic alignment, data frame, re-indexing,

functionality,data loading and many more concepts were done direct hands on.

Finally the session was concluded by a brief wrap up of the whole day’s discussion.

Mr. Devilal Chandrakant, ITIE Academy, Bangalore Session Time: 2.00pm to 5.00pm

Introduction To Pandas

Mr. Devilal Chandrakant started the session with basics of data analysis and modelling and what all one can do with it using python

library pandas. The total session was hands on and in this the basic data structures, working with indices, operations, automatic

alignment, data frame, re-indexing, functionality ,data loading and many more concepts were done direct hands on.

Finally the session was concluded by a brief wrap up of the whole day’s discussion.

“Imagination is a force that can actually manifest a reality.” – James Cameron, TED 2010 Page-9

A One Week Workshop on

"Project Assignment" 18

th-23

rd July, 2016

A One Week workshop on “Project Assignment” by Mr. Waman Sanap, Director, Ipac Automation pvt., ltd., Pune was arranged by

the Department of Instrumentation Engineering on July 18th

-23rd

, 2016.

The workshop was started with inauguration ceremony including brief introduction and felicitation of Mr. Waman Sanap by Hon.

Director Dr. L. M. Waghmare. Then after very first session is started immediately. The students of Final year B.Tech attended this

workshop. This activity was sponsored by TEQIP-II.

Dr. Waghmare, Dr. Holambe, Dr. Hamde discussing with Mr. Sanap

Dr. L. M. Waghmare felicitated Mr. Sanap

On Day 1, Mr. Waman Sanap explained the role of documentation in regards of project assignment and completion.

The Day 2 is engaged by expert with explanation on P&ID design, Instrumentation index sheet, Data sheets, I/O List, Instrument

hook-up diagram, Cable schedule and JB schedule, Cause and Effect diagram, Schematic loop diagram, Instrument tray layout.

The Day 3 started with the introduction of Mr. Shrikant Madde, Ipac Automation, Pune, followed by his felicitation. Then after

immediate first session delivery was started by him. In this session expert has covered introduction to detail engineering, study of

design inputs, preparation of instrumentation index sheet from P&IDs. After lunch a hands-on practical session on the topics covered

in first session was carried out till 6.00 pm.

Inaugural function

Participants in the program

On the Day 4 different topics like, Preparation of I/O list, How to develop a logical diagram for heaters using control philosophy,

cause and effect matrix. In the second session, hands-on practice on various software’s such as Intool’s external editor, Auto CAD,

Microsoft Visio was covered.

The Day 5 included preparation of junction box scheduling, preparation of cable list, Datasheet of orifice, Thermocouple, Analyzer,

Skin thermocouple, Preparation of FLS (Function Loop Schematic) drawings.

The Day 6 focused on various details of standards/codes used in engineering, hook up diagrams, Junction box, Power Distribution

Boards (PDB) Specification Sheets.

“Skill without imagination is craftsmanship and gives us many useful objects such as wickerwork picnic baskets.

Imagination without skill gives us modern art.” ― Tom Stoppard,

A Report of One Week Workshop on "Project Assignment"

Mr. Shrikant Madde, Ipac Automation, Pune

Mr. Shrikant Madde, Ipac Automation, Pune

A Report on

Summer Internship 2016 6

th May - 9

th July, 2016

Department of Computer science and Engineering has conducted a two month Summer Internship Programme for Third Year and

Final Year students of CSE and IT department of SGGSIE&T under TEQIP-II program. The duration of Internship programme was

from 06/05/2016 to 09/07/2016. The participants were selected by taking interviews & total 12 students were selected for the

Summer Internship Programme.

Objectives of Summer Internship Programme:

To provide training to students and develop a web based exam module for carrying out different activities such as printing grade

cards, Hall tickets, online mark entry, student enrolment and registration etc from students

The internship programme was divided into two phases:

I. Training provided by faculty members on different subjects such Database, Software Engineering, programming languages

for software development.

II. Development of web based MIS and exam module for institute.

In phase I hands on training of different subjects required for software developments was provided, the schedule for phase I for one

month is as follows:

Table: Report for Week One (from 09/05/16 to 14/05/16)

Sr. No Subject/ Topics Covered Overview of Contents

1. Software Engineering Software Engineering Overview

Software Development Life Cycle

2 Database Management System Database Concepts

Architecture

3 PHP

Introduction

Environment setup

Syntax Overview

Variable, Operators, String

4 MySQL

Installation

Administration

Basic MySQL commands

5 Content Management System Introduction to CMS

Features

Take advantage of every opportunity to practice your communication skills so that when important occasions arise, you will have the gift, the style, the sharpness, the clarity, and the emotions to affect other people. Jim Rohn

Page-11

Table: Report for Week Two (from 16/05/16 to 20/05/16)

Sr. No Subject/ Topics Covered Overview of Contents

1. Software Engineering Software Requirements

Software Project Management

2 Database Management System Database Models

Database Schema

3 PHP Syntax Overview

Variable, Operators, String

4 MySQL

Connections

Data Types

Create, Drop , Select etc.

5 Content Management System

Benefits of CMS

Open Sourced CMS Drupal, WordPress etc.

Moodle Introduction

Configuration, Plugin development

Table: Report for Week Three (from 23/05/16 to 28/05/16)

Sr. No Subjects/ Topics Overview of Contents

1

Creating and Hosting website

Installation and Management of Moodle

Creating Website

Hosting website on college LAN

2 Software Engineering

Software Designing

Designing Interface of Application

Theme Designing

3 MySQL

Introduction to SQL

Database designing

ER diagram

Tabular representation of Relationship set

4 Database Management

Transactions

Application of Concept

Distributed database design

Network Databases

6 Moodle

Introduction

Installation

Configuration

Framework

Table: Report for Week Four (from 30/05/16 to 03/06/16)

Sr. No Subjects/ Topics Overview of Contents

1

Creating and Hosting website

General hosting

Website management

Website database management.

Website mailing.

Creating mail ids

Squirrel mail. 2

Moodle

Moodle Architecture

Hosting Moodle on Linux platform

Moodle Administration Basics

Customization

3

MySQL

Stored Procedures

Study of Moodle Database

PHP MyAdmin

5 PHP Moodle API in PHP, Study of Moodle Plugin

Interns have developed the examination portal successfully. Some of the modules are successfully implemented and tested in

institute’s local area network. Around 80% work is completed. Development of other required module is in progress and will be

completed in given period.

Mr. H. P. Ambulgekar Mr. G. S. Malande

Coordinator Co- Coordinator

"A goal is not always meant to be reached, it often serves simply as something to aim at.” – Bruce Lee Page-12

Report of One Day workshop On

Industrial Practices & Innovative Trends in Chemical Engineering In Liaison with

TEQIP-II and Chemical Engineering Students Association (CheSA) 27

th August, 2016

It gives us immense pleasure to inform you that, Department of Chemical Engineering of Shri Guru Gobind Singhji Institute

of Engineering and Technology (SGGSIE&T), Nanded has conducted one day workshop on “Industrial Practices and innovative

trends in Chemical Engineering”, dated 27th

August 2016, Saturday under the edges of Technical Education Quality Improvement

Program Phase II (TEQIP-II) and Chemical Engineering Students council (CHESA).

The workshop has the primary objective as faculty interaction and improvement in liaison with the experts from the well

known CSRI Laboratory of India i.e. Indian Institute of Chemical Technology (IICT), Hyderabad, which established in 1944, is a

constituent laboratory of Council of Scientific and Industrial Research (CSIR), New Delhi. With its expertise in chemistry and

chemical technology, it provides solutions to challenges faced by Industry, Government Departments and Entrepreneurs through

basic and applied research, and process development. It is internationally recognized for its contributions to chemistry research and is

an ideal place for taking ideas to commercialization through state of the art research and development.

The second important objective of the workshop is to inculcate the research activities in faculty as well as in students of

chemical engineering department. Workshop provides an overview on the topics which covers the industrial practices and its

development section. The research activity importance for the development of quality products with the optimal resource use is

oriented to the participants, through the example of water treatment industrial development with new technology addition. The

betterment of industrial current practices and innovative trends in water treatment facilities which and more elaborated by the experts

in their talk. Any industry work on the basis of quality improved in existing product through the research and proper application. The

pilot plant application plays an important role in the development of industrial part. Overall the expert talk was around the research

ideas which can be developing through the pilot plant application and then can be commercialized with the minimum cost input and

improved quality.

Experts 01. Mr. S. Shirdhar, Principal Scientist CSIR-Indian Institute of Chemical Technology (Council of Scientific and

Industrial Research) Ministry of Science & Technology, Govt. of India Tarnaka, Hyderabad-500007, Telangana.

02. Mr. N. Ramesh, Technical Officer CSIR-Indian Institute of Chemical Technology (Council of Scientific and

Industrial Research) Ministry of Science & Technology, Govt. of India Tarnaka, Hyderabad-500007, Telangana.

03. Dr. M. Shyam Sunder, Technical Officer CSIR-Indian Institute of Chemical Technology (Council of Scientific

and Industrial Research) Ministry of Science & Technology, Govt. of India, Tarnaka, Hyderabad-500007, Telangana.

Key feature of the Workshop 1. Overview on the industrial practices on the basis of quality improvement and implementation of the research activity.

2. Pilot Plant research activity and application of pilot plant on commercial scale industries.

3. Product quality improvement checkups and bottleneck problems associated with it

4. ISO Certification for the industries and its importance’s for the commercial scale industries.

5. Chemical Research implementation in commercial scale production unit specifically water purification (R.O.) plants

Inauguration ceremony of one day workshop:-

Conception of the one day workshop was scheduled time 10:30 A. M. dated 27th of August 2016 at CH2 in Chemical Engineering

Department. Our beloved Honorable Director Dr. L. M. Waghmare, is the chief guest of the workshop with guest of honor Mr. S.

Shirdhar, Principal Scientist, Mr. N. Ramesh, Technical Officer and Dr. M. Shyam Sunder, Technical Officer CSIR Indian Institute

of Chemical Technology (Council of Scientific and Industrial Research) Ministry of Science & Technology, Government of India

Tarnaka, Hyderabad-500007, Telangana, INDIA.

Dignitaries on the Diaz for Inaugural function

Saraswati pujan by Hon. Dr. L. M. Waghmare

“Your comfort zone is a place where you keep yourself in a self-illusion and nothing can grow there but your potentiality can grow only when you can think and grow out of that zone.” ― Rashedur Ryan Rahman

Page-13

FELICITATION OF THE GUEST:

The guests of the workshop are felicitated as per the tradition of the institute. guest are felicitated by bouquet and an novel book

which nurture the good ideals about the life.

Felicitation of Dr. S. Shirdhar, Principal Scientist CSIR by Dr. Waghmare

Felicitation of Mr. Ramesh, Technical Officer, CSIR by Prof. Dethe

Felicitation of Dr. Shyam Sunder, Technical Officer, CSIR by Dr.Jadhav

Felicitation of Dr. Waghmare, Technical Officer, CSIR by Dr.Jadhav

Induction Speech by

Dr. P. G. Jadhav, Head Department of Chemical Engineering

SGGSIE&T, Nanded

An brief over view on the objective of the workshop and its

importance is explain by the Dr. P. G. Jadhav, Head, Department

of Chemical Engineering. The fundamentals uses and simple

orientation guideline for the research activity has been well

explain by him. sir explain importance of the implementation of

the research technologies on commercial scale plant, its

importance and future scope related to the research activity.

With a heartily thankful note sir welcomes the Chief Guest and

Guest of Honor of the program. sir also gave the congratulation

to the organizing team to conduct such informative workshop for

faculty as well as for students.

Induction speech by Dr. P. G. Jadhav

Dr. Shridhar demostrating the new technologies

Dr. S. Sridhar, Principal Scientist CSIR, demonstrated the

application of new research technologies in the waste water

treatment for the water treatment industries. Sir gave the best

example use of the new technique of membrane technology

which is use for the production of disinfectant and mineralized

water. Sir gave an over view on CSIR work in the water

treatment industries, which cam bring the revolutionary change

in the areas where infected water is present which causes

different health issues to the humans.

"I have no special talents. I am only passionately curious. – Albert Einstein Page-14

Expert Talk by Dr. M. Shyam Sunder

Sir explains the pilot plant research activity and its importance in

large scale production units. Pilot plant plays an important role in

the implementation of new technologies in the large scale

production industries. Replication of the small scale production

will not solve the problem associated with all the aspects of

process industries. Results and optimization techniques obtained

by the pilot plant rectified and then applied in large scale

production. importance of Bench Scale Experiments through

research work at gram level, Equipment requirement calculation

of mass and energy balance, Reaction Conditions analysis, Type

of Reaction, Processing of Reaction mixture, Product Analysis

and Calculations is well explain by the Dr. M. Shyam Sunder Sir.

Expert Talk by Dr. M. Shyam Sunder

Expert Talk by Mr. N. Nareesh

International Standard Organization, codes and standards importance for the societal benefit are explain by Mr. N. Ramesh. Sir also

briefly explains the importance of ISO 9000 for the quality improvement of products from the industries. ISO norms are also used for

the safety operation and also put constrains on the unethical practices in industries.

Vote of thanks proposed by Prof. V. S. Hakke, Assistant Professor, Department of chemical engineering. He expresses his sincere

towards the Honorable Director Dr. L. M. Waghmare for being supportive to organize such workshop for improvement of faculty

interactions, also put his gratitude’s towards the Dr. Gonde TEQIP, Sir also express his all the faculty members and students

coordinators how works for the successful organization of workshop.

Expert Talk by Mr. N. Nareesh

Vote of thanks proposed by Prof. V. S. Hakke

A three days Training on

A project Management Tool 26

th -28

th August, 2016

Civil Engineering department Organised A three days Training on "A project Management Tool" during 26th

-28th

August 2016 at

SGGS IE&T, Nanded. The aim of the workshop was to give fundamental information about project management techniques and

different tools used in PRIMAVERA. The training includes the following topics:

-Introduction to Project management

-Introduction to Project management tools (Primavera)

-Hands on practice on primavera

The overall goal of the training workshop was to introduce the students to new management tools and techniques useful in the

professional field. Additionally, training gave the insight in handling the problems regarding the resource allocation, scheduling, and

levelling. The person in charge was Mr. Akash Tilokani. The workshop was opened at 12:30 pm with welcome statement of HOD,

Dr. Rajurkar followed by coordinator Dr. M.L.Waikar.

Workshop Sessions First Day: (Friday 26/08/16) There were two sessions first one was on brushing up of theoretical concepts and followed by its actual use in the software. On this

day students had preliminary exposure to different toolbars in PRIMAVERA. Mr. Akash taught various management skills that are

required in construction field. And some doubts regarding theory were cleared.

"Learning is more than the acquisition of the ability to think; it is the acquisition of many specialized abilities for thinking about a variety of things.” ― Lev S. Vygotsky

Page-15

Second Day: (Saturday 27/08/16)

On second day Mr. Akash taught how to create networks and allocate various resources in the software in the first session of the day.

Students practised the same during the second session of the day and at the end there was a small discussion on the doubts they had

while handling the software. An assignment was given to the students.

Mr. Akash covering toolbars in PRIMAVERA

Mr. Akash covering how to create networks

Third Day: (Sunday 28/08/16)

Students continued the assignment and had a discussion on doubts

they had while solving the assignment. On the second session Mr.

Akash taught how to level the resources and update the networks.

At the end of the workshop there was a vote of thanks followed by

feedback session.

All the students participants interacted with Mr. Akash and cleared

all their doubts. In the feedback session, all the participants

expressed their satisfaction about the course contents and the

expert resource person as well.

The coordinator Dr. M. L. Waikar expressed vote of thanks to the

resource persons, HoD, Director and all the students for making

this course a grand success. Mr. Akash covering how to level the resources

An Expert Lecture on

"Carpet Manufacturing and Man-Made Fibre Spinning" 10

th -12

th August, 2016

Dept. of Textile Technology organized TEQIP-II sponsored expert lecture on "Carpet Manufacturing and Man-Made Fibre

Spinning". Mr. Ashok Swamy, GMATE Mumbai was invited to deliver these lectures during 10th -12th August 2016. Mr. Ashok

Swamy has a wide experience of 30 years in "Carpet Manufacturing and Man-Made Fibre Spinning". During his lectures, he talked

about different processes of manmade spinning and melt spinning. He also discussed the technical details of carpet manufacturing

and new emerging trends in carpet manufacturing along with its scope in the near future. Mr. Ashok Swamy has travelled around 30

countries and he shared all his experience among all the students so that they understand the basics of business etiquettes. Finally, he

discussed the requirement of the industry and its expectations from the academic institutes and its students. He explained a few points

useful for preparing for the interviews and conducted mock interviews for demonstration purpose.

Around 65 students from S.Y., T.Y. and B.Tech. participated actively in this lecture series. All the students expressed that

these lectures are helpful to them for upgrading their knowledge about melt spinning and carpet manufacturing as well as to

understand the industry perspectives and expectations. All the students reported positive feedback about the lecture series and the

resource person.

“Skills make dreams happen. They build economies. They make people rich and famous. In today’s world, the demands for skills are staggering. Government, business and individuals have too much to achieve, their goals are huge. They are constantly, and I do mean constantly, looking for people with the right skills. People that can get the job done.” ― Emi Iyalla

Page-16

A Two days workshop on

'Tall Buildings Design’ 17

th-18

th September, 2016

A two days workshop on 'Tall Buildings Design' has been successfully organized during 17

th-18

th September, 2016 in collaboration

with the Civil Simplified, Bengaluru. Thirty two participants attended the workshop. This workshop was useful to FY M.Tech.

(Structures) students as we are offering this course as elective for these students. This workshop is developed by alumni of IIT

Kanpur with focus on outcome based learning and involve students to take up real life problems for their dissertation work. Useful

Lecture and Practical Sessions were engaged during the workshop. Total expenditure incurred for this workshop is Rs.56,200/-.

Banner of the workshop

Dr. Rajurkar welcomed the speaker of the workshop

Practical session during of the workshop

" Look deep into nature, and then you will understand everything better"-- Albert Einstein Page-17

A Industry Visit At

Scientech And Nvis Technologies Pvt Ltd. Indore 17

th September 2016

Scientech Technologies Pvt. Ltd. is an ISO 9001:2008 certified company that has a strong presence in educational, health care,

environmental and industrial sectors. Scientech is one of the leading test and measurement equipment manufacturers. Its products set

standards in education, research, development, and production.

Nvis Technologies Pvt.Ltd., a part of the Scientech group, is a leading technological solution provider in education and

environment sectors . with a satisfied customer base in over 75 countries. At Nvis, They design & manufacture a wide range of stellar

didactic solutions that include innovative learning solutions for physics, electrical, electronics, embedded, and microwave

laboratories for schools, polytechnics, vocational institutes, engineering colleges and universities. Nvis solutions provide an ideal

platform to enhance education, training, skills & development amongs our young minds.

The members of the company received us at the entrance and gave a brief introduction about the company. We saw the

manufacturing department of the company with one of the employee of the company. He told us about different departments of the

manufacturing devices like core and function generator and a dc power supply. He also introduced a pcb machine to all the students

with some demos and with good explanation. After we were moving to assembly department where the machines get assembled. We

saw many more machines that are used in the manufacturing of the CRO's, Function Generator, power supply. Then, We saw the

small programmable PCB prototype machine that was developed by one of the engineer of the company. He saw us one demo about

how to design a small PCB on that machine.

" Insanity: doing the same thing over and over again and expecting different results" – Albert Einstein Page-18

After that we moved to the Nvis industry which is sister company of the Scientech Technology. There we saw the manufacturing of

the Digital Millimeters and many other trainer circuits like op-amps and three phase power supplies and many other devices that are

specially developed for the students. We also saw the mechanical assembly of the various parts of the CROs and multimeters.at the

end we asked the questions to the HR and other engineers about various technical aspects.

INTERACTIVE SESSION WITH H.R.

Firstly students had interactive session with company HR in conference hall. We, the faculty members then discussed how to become

a well trend employee, about value addition of product, technology behind advertisement and also discussed about interview section

with HR. The HR Manager told us to have an honesty and be ready to learn and share knowledge. “KEEP LEARNING REST OF

THE LIFE”. We had a great discussion with her and we all were motivated with her inspiring words.

This was very successful visit as all the 40 students from SY ENTC Class were happy that they could learn various technical

concepts and technologies.

We all the faculty members and students would like to thank our Head of the department and Hon. Direcor Sir for organizing such a

great visit and for supporting us. We all want to thank all the faculty members who helped us to organize this visit successfully.

Faculty:

1) Mr.Parmeshwar Patil

2) Mr.Chetan Zanwar

3) Mr. Pankaj Wakhradkar

4) Ms.Supriya Ankushe

5) Ms.Sandhya Rathod

" The true sign of intelligence is not knowledge but imagination" – Albert Einstein Page-19

Three Days Industrial Visit at Kolhapur

10th-14th September, 2016

Day 1: Indo Count Industries Ltd., Kagal, Kolhapur, 11th September, 2016

Indo Count Industries Ltd. is a textile industry located in Kagal MIDC, district Kolhapur in the Indian state of

Maharashtra. This textile industry completed all bleaching, dyeing, printing and finishing of material using the latest technologies and processes. Indo Count produces 14,000 tons of combed cotton yarn per year. Indo Count Source the best cotton from India and around the globe and use state-of-the-art equipment and processes in their three spinning plants. Indo Count has 80,016 spindles at Kolhapur, Maharashtra.

The 44 students from Third Year Instrumentation Engineering Department along with three faculty members were visited Indo Count Industries Ltd. Plot No- T3, MIDC, Kagal, Kolhapur on 11th September, 2016. The visit was started with warm welcome by Indo Count Industries Ltd., Kolhapur. After that the students are divided into two different groups (22 students each) for the sake of convenience leaded by one faculty member. This activity was coordinated by Mr. Kale, Assistant Engineer, Indo Count Kolhapur & Mr. Mugtekar, Assistant Engineer, Indo Count, Kolhapur. The visit was concluded with photo session and vote of thanks given by one of the faculty member.

Students in front of Indo Count Kagal

Mr. Kale, Assistant Engineer and Mr. Mugtekar, Assistant Engineer, Indo Count, Kolhapur with faculty members.

Outcome of visit- Every student personally visited different sections of Industry and understood the instrumentation used in textile industry, working principle of various instruments used like-

Heat Exchanger, Drum Steam Heaters, different types of dryers, weaving, spinning machines, programmable logic controllers used etc. This visit helped students to understand various aspects of Instrumentation in manufacturing industries.

Students in front of Indo Count Kaga

"Learn from yesterday, live for today, hope for tomorrow. The important thing is not to stop questioning" -Albert Einstein Page-20

Three Days Industrial Visit at Kolhapur

10th-14th September, 2016

Day 2: KOLHAPUR ZILLA SAHAKARI DUDH UTPADAK SANGH LTD. (Gokul Dairy Plant) 12th September, 2016

Kolhapur Zilla Sahakari Dudh Utpadak Sangh Ltd.well known with its popular brand ‘Gokul‘ is an Operation Flood cooperative dairy project established on 16th March, 1963. Since then achieved many land marks in Milk Procurement, Extension, Animal Health, Breeding, Milk Processing, Product making and Marketing. At present Gokul has modern 7 Lakh Liters/day capacity dairy plant with 4 owned and 1 hired chilling centers having 4.25 Lakh Liters/day milk handling capacity with modern Packing Unit at Navi Mumbai. For milk production enhancement in milk shed gokul has presently 41 Mobile veterinary routes, 430 Cluster and 17 static A. I. Centers, A state of the art new 300 MT/day capacity Cattle Feed Plant with popular ‘Mahalaxmi’ brand is operational at Kagal-Hatkanangale Five Star MIDC. The old cattle feed plant with 200 MT/day capacity plant is simultaneously operational.

Prof. R. H. Chile with Mr. Anil Swami Manager Engineering Section

Gokul Dairy Plant

Prof. R. H. Chile, Mr. J. G. Parkhe, Ms. S. R. Nandurkar & Students of T.Y. Instrumentation with Mr. Anil Swami, Manager Engineering Section

“Gokul Dairy Plant, Kolhapur”

The 44 students from Third Year Instrumentation Engineering Department along with three faculty members were visited

KOLHAPUR ZILLA SAHAKARI DUDH UTPADAK SANGH LTD. (Gokul Dairy Plant), MIDC, Kagal, Kolhapur on 12th

September, 2016. The visit was started with warm welcome by KOLHAPUR ZILLA SAHAKARI DUDH UTPADAK SANGH

LTD. (Gokul Dairy Plant), Kolhapur. After that the students are divided into two different groups (22 students each) for the sake of

convenience leaded by one faculty member. This activity was coordinated by Mr. Anil Swami, Manager Engineering section, Mr.

Patil , Engineer & Mr. Kamble, Engineer, KOLHAPUR ZILLA SAHAKARI DUDH UTPADAK SANGH LTD. (Gokul Dairy

Plant), Kolhapur. The visit was concluded with photo session and vote of thanks given by one of the faculty member.

Outcome of visit- This visit provided students the brief insight of Dairy

Plant.

Students are exposed to the working of delicate systems used in food industries like -37ᵒ cooling area control.

The students are able to understand how to maintain quality as well as hygiene in food industry and Instrumentation required in same aspect.

Students in front of Packaging Unit of Gokul

" The only source of knowledge is experience"– Albert Einstein Page-21

Dr. R. H. Chile with other members in front of Gokul Building

All the students in front of Gokul Auditorium

The financial support required to conduct this visit was provided by TEQIP-II. We are grateful to Dr. L. M. Waghmare, Director of our institute, Dr. A. B. Gonde, TEQIP-II Coordinator, Dr. S. T. Hamde, HOD, Instrumentation Engineering Department and Dr. P. Kar, Professor, Textile Department for their encouragement and support given.

" Peace cannot be kept by force; it can only be achieved by understanding" – Albert Einstein Page-22

vishnupuri, nanded (maharashtra state) pin …...day 2 day-3 date: 07.07.2016 session 1, 2, 3, 4...

Documents