virtual commissioning - warehouse

2
FLEXSIM IL: VIRTUAL COMMISSIONING OF INTRALOGISTICS SYSTEMS Modern intralogistics systems are highly complex and controlled on different automation levels. The design as well interdisciplinary challenges. “Flexsim IL” is a new add-on for the - ports the design and planning of material handling as well as the development of the control systems. The performance of your system can be analysed with Flexsim IL and the control units commissioned virtually. Typical areas of application Storage systems and warehouses Transport systems Production logistics Easy design, planning and optimization of the material handling system Reduction of the commissioning time on site by up to 80% Reduction of planning costs Avoidance of unplanned downtimes simulator Flexsim Development of new operating scenarios and routing strategies Virtual commissioning of the control systems Application in all project phases Fraunhofer Institute for Integrated Circuits IIS Design Automation Division EAS Zeunerstrasse 38 01069 Dresden, Germany Contact: Stephan Seidel Telefon +49 351 4640-754 [email protected] www.eas.iis.fraunhofer.de/en.html FRAUNHOFER INSTITUTE FOR INTEGRATED CIRCUITS IIS DESIGN AUTOMATION DIVISION EAS IN COOPERATION WITH

Upload: mano-kanthanathan

Post on 28-Oct-2014

87 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Virtual Commissioning - Warehouse

FLEXSIM IL: VIRTUAL COMMISSIONING OF INTRALOGISTICS SYSTEMS

Modern intralogistics systems are

highly complex and controlled on different

automation levels. The design as well

interdisciplinary challenges.

“Flexsim IL” is a new add-on for the

-

ports the design and planning of material

handling as well as the development of

the control systems. The performance of

your system can be analysed with Flexsim

IL and the control units commissioned

virtually.

Typical areas of application

Storage systems and warehouses

Transport systems

Production logistics

Easy design, planning and optimization

of the material handling system

Reduction of the commissioning time

on site by up to 80%

Reduction of planning costs

Avoidance of unplanned downtimes

simulator Flexsim

Development of new operating

scenarios and routing strategies

Virtual commissioning of the control

systems

Application in all project phases

Fraunhofer Institute for

Integrated Circuits IIS

Design Automation Division EAS

Zeunerstrasse 38

01069 Dresden, Germany

Contact:

Stephan Seidel

Telefon +49 351 4640-754

[email protected]

www.eas.iis.fraunhofer.de/en.html

F R A U N H O F E R I N S T I T U T E F O R I N T E G R AT E D C I R C U I T S I I S

D E S I G N A U T O M AT I O N D I V I S I O N E A S

IN COO PERATION WITH

Page 2: Virtual Commissioning - Warehouse

Flexsim IL

The Flexsim IL add-on consists of:

transport objects

Telegram interface for data exchange

Signal interface to a programmable

conjunction with the simulation model.

For all levels of abstraction only one simu-

lation model is needed, no matter if a PLC

or an MFC is connected to the simulation

or not.

simulation results

The interfaces for MFC and PLC provide

an easy way to perform a virtual commis-

sioning of the material handling system in

Plant Layout and Performance Analysis

This project phase equals the conventional

are typical sequences of transport transactions

be evaluated and optimized before the imple-

Implementation and Test of the MFC

Implementation and Test of the PLC Program

-

-

Planning and virtual commissioning of control systems for intralogistics with Flexsim IL

Process Model

WMS

MFC

WMS

WMS

MFC

HMI Soft-PLC

Transport TaskTelegrams

Transport StatusTelegrams

Transport TransactionsOperating Scenarios

Transport Status

Transport Task

Transport TransactionsOperating Scenarios

Transport TransactionsOperating Scenarios

Actuators

Sensors