v9271_fivalco_2902e
TRANSCRIPT
-
7/25/2019 V9271_FIVALCO_2902E
1/6
FivalcoR
-1-
Dimensions (mm)
Size 50 65 80 100 125 150 200 250 300 350 400 450 500 600
A 161 175 181 200 215 225 241 296 336 368 400 422 480 562
B 80 91 95 115 134 138 174 198 234 280 310 340 388 450
D 90 90 90 90 90 90 125 125 125 150 175 175 210 210
E 43 45 46 51.5 56 56.5 60 68.5 79.5 78 88 109 127 154
SxS 11x11 14x14 17x17 22x22 27x27 !48
Notes:
1. Designed and tested in accordance with EN 593 or MSS SP-67.
2. Flange bolt circle dimensions comply with EN1092-2 PN10 / 16, ANSI B16.1 Class125. Other flange types are available.
3. Top flange conforms to ISO5211/1.
*4. Valves size 2(50) to 12(300) can be rated at PN20 / Class150, but the body material should be ductile iron ASTM
A536 Gr. 65-45-12. Working pressure is 20bar / 300psi.
5. Design & materials are subject to change without notice.
Butterfly Valve
EN 593 / MSS SP-67, Wafer Type, PN16 / Class125
Figure Number
2302E Stainless Steel Disc, EPDM Liner
2302N Stainless Steel Disc, NBR Liner
2303E Bronze Disc, EPDM Liner
2303N Bronze Disc, NBR Liner
2304E DI Disc, Chrome or Nickel Plated, EPDM Liner
2304N DI Disc, Chrome or Nickel Plated, NBR Liner
Working Pressure and Temperature
Nominal
Pressure
Size DN50-DN300: 16bar / 200psi
Size DN350-DN600: 10bar / 150psi
Working
Temperature
EPDM: -10" to 120"
NBR: -10" to 82"
Materials List
Part Name Material EN Spec. ASTM Spec.
Body* Cast Iron EN-JL1040 A126 Class B
ShaftStainless
SteelBS970 416S21 AISI 416
Stainless
SteelBS970 304S15 A351 CF8
Cast BronzeEN1982
CC491KB62 C83600
Disc
Ductile Iron
Chrome or
Nickel Plated
EN-JS1050 A536 65-45-12
Bushing PTFE Commercial Commercial
Liner EPDM/NBR Commercial Commercial
O-Ring EPDM/NBR Commercial Commercial
Size 2-12
Size 14-24
-
7/25/2019 V9271_FIVALCO_2902E
2/6
FivalcoR
-2-
Dimensions (mm)
Size 50 65 80 100 125 150 200 250 300 350 400 450 500 600
A 140 152 160 180 191 202 241 274 315 368 400 422 480 562
B 68 76 85 100 120 132 160 200 230 280 310 340 388 450
D 90 90 90 90 90 90 125 125 125 150 175 175 210 210
E 43 45 46 51.5 56 56.5 60 68.5 79.5 78 88 109 127 154
SxS 11x11 14x14 17x17 22x22 27x27 !48
Notes:
1. Designed and tested in accordance with EN 593 or MSS SP-67.
2. Flange bolt circle dimensions comply with EN1092-2 PN10 / 16, ANSI B16.1 Class125. Other flange types are available.
3. Top flange conforms to ISO5211/1.
*4. Valves size 2 to 12 can be rated at PN20 / Class150, but the body material should be ductile iron ASTMA536 Gr. 65-45-12. Working pressure is 20bar / 300psi.
5. Design & materials are subject to change without notice.
Size 2-12
Size 14-24
Figure Number
2502E Stainless Steel Disc, EPDM Liner
2502N Stainless Steel Disc, NBR Liner
2503E Bronze Disc, EPDM Liner
2503N Bronze Disc, NBR Liner
2504E DI Disc, Chrome or Nickel Plated, EPDM Liner
2504N DI Disc, Chrome or Nickel Plated, NBR Liner
Butterfly Valve
EN 593 / MSS SP-67, Lug Type, PN16 / Class125
Working Pressure and Temperature
Nominal
Pressure
Size DN50-DN300: 16bar / 200psi
Size DN350-DN600: 10bar / 150psi
Working
Temperature
EPDM: -10" to 120"
NBR: -10" to 82"
Materials List
Part Name Material EN Spec. ASTM Spec.
Body* Cast Iron EN-JL1040 A126 Class B
ShaftStainless
SteelBS970 416S21 AISI 416
Stainless
SteelBS970 304S15 A351 CF8
Cast BronzeEN1982
CC491KB62 C83600Disc
Ductile Iron
Chrome or
Nickel Plated
EN-JS1050 A536 65-45-12
Bushing PTFE Commercial Commercial
Liner EPDM/NBR Commercial Commercial
O-Ring EPDM/NBR Commercial Commercial
-
7/25/2019 V9271_FIVALCO_2902E
3/6
FivalcoR
-3-
Dimensions (mm)
Size 50 65 80 100 125 150 200 250 300
Pipe OD 60.3 73.0/76.1 88.9 114.3 139.7/141.3 165.1/168.3 219.1 273.0 323.9
A 122 140 147 177 204 215 245 295 320
B 77 85 90 108 120 145 180 230 260
C 30 30 30 30 30 30 30 30 30
D 90 90 90 90 90 90 125 125 125
E 84 97 97 116 148 148 133 159 165
Notes:
1. Designed and tested in accordance with EN 593 or MSS SP-67.
2. Grooves conform to European or AWWA C606 standard. Other groove dimensions are available.
3. Top flange conforms to ISO 5211/1.
4. Valve also can be made to shouldered end type.
5. Design & materials are subject to change without notice.
Figure Number
2902E Ductile Iron Disc, EPDM Encapsulated2902N Ductile Iron Disc, NBR Encapsulated
Butterfly Valve
EN 593 / MSS SP-67, Grooved End, PN20 / Class150
Working Pressure and Temperature
Nominal
Pressure20bar / 300psi
Working
Temperature
EPDM: -10" to 120"
NBR: -10" to 82"
Materials ListPart Name Material EN Spec. ASTM Spec.
Body Ductile Iron EN-JS1050 A536 65-45-12
Shaft Stainless Steel BS970 416S21 AISI 416
DI EPDM
CoatedEN-JS1050 A536 65-45-12
Disc
DI NBR Coated EN-JS1050 A536 65-45-12
Bushing PTFE Commercial Commercial
O-Ring EPDM/NBR Commercial Commercial
-
7/25/2019 V9271_FIVALCO_2902E
4/6
FivalcoR
-4-
Dimensions (mm)
Size 50 65 80 100 125 150 200
Pipe OD 60.3 73.0/76.1 88.9 114.3 139.7/141.3 165.1/168.3 219.1
A 81 97 97 116 148 148 135
B 151 210 210 245 292 335 398
C 46 70 70 89 102 113 140
D 155 155 205 245 245 310 310
E 103 124 145 178 216 240 343
Notes:
1.Grooves conform to European or AWWA C606 standard. Other groove dimensions are available.
2. Valve can be made to shouldered end type also.
3. Design and Materials are subject to change without notice.
Figure Number
2952E EPDM Lined Body
2952N NBR Lined Body
Butterfly Valve
Steel Pipe Body, Grooved End, PN16 / Class150
Materials List
Part Name Material EN Spec. ASTM Spec.
Steel Pipe,
EPDM CoatedBS970 050A20 AISI 1020
BodySteel Pipe,
NBR CoatedBS970 050A20 AISI 1020
Shaft Stainless Steel BS970 416S21 AISI 416
Disc Stainless Steel BS970 304S15 A351 CF8
Coupling Ductile Iron EN-JS1050 A536 65-45-12
O-Ring EPDM/NBR Commercial Commercial
Spring Stainless Steel BS970 304S15 AISI 304
Gasket PTFE Commercial Commercial
Dust Cover Stainless Steel BS970 304S15 AISI 304
Handle Ductile Iron EN-JS1050 A536 65-45-12
-
7/25/2019 V9271_FIVALCO_2902E
5/6
FivalcoR
-5-
Ductile Iron Lever Handle
Steel Lever Handle, FBE Coated
Gear Operator
Dimensions (mm)
Valve Size Part Number T
DN50~ DN150 2000 - S 263
DN200~DN250 2000 - M 326
DN300 2000 - L 415
Dimensions (mm)
Valve Size Part Number T
DN50~ DN150 2001 - S 260
DN200~DN250 2001 - M 325
DN300 2001 - L 400
Dimensions (mm)
Valve Size 50~150 200~250 300~350 400~450 500~600
Part No. 2000-24 2000-30 2000-50 2000-80 2000-70
Ratio 24:1 30:1 50:1 80:1 70:1
L 160 238 226 266 241
H 65 85 95 121 118
D 195 297 297 388 388
E 108 153 161 252 264
C 130 177 198 281 303
Materials List
Part Name Material EN Spec. ASTM Spec.
Housing Cast Iron EN-JL1040 A126 Class B
Cover Cast Iron EN-JL1040 A126 Class B
Worm Gear Carbon Steel BS970 060A47 AISI 1045
Segment Gear Ductile Iron EN-JS1050 A536 65-45-12
Handwheel Cast Iron EN-JL1040 A126 Class B
Butterfly Valve
Lever Handle and Gear Operator
-
7/25/2019 V9271_FIVALCO_2902E
6/6
FivalcoR
-6-
Design and Installation
Design requirements
Fivalco butterfly valve should be connected to the piping system with approved couplings or flanges. Flow may be from either
direction, and the valves may be positioned in any direction.
Fivalco butterfly valves have been designed with a slow close handwheel operator, which effectively minimizes water hammer.
These valves feature minimum flow restriction and pressure loss when in the fully open position.
Installation
When the valves are received from the manufacturer they should be handled carefully to avoid breakage and damage to the
seating area. Before installation of the valves, clean piping, flange and coupling. When the valves close hard, it is usually due todebris lodged in the seating area. Often this may be corrected by backing off the handwheel and closing again.
The valve should never be forced to seat by applying a wrench to the handwheel as this may distort the valve components or
score the sealing surface. Care must be taken to align wafer valves correctly so that the disc operation to the fully open position
will not be obstructed. The use of excessive force to open or close the valve violates all warranties whether express or implied.
The inlet and outlet pipe adjacent to the valve should be properly supported to prevent excessive stress on the valve body. The
valve should not be used to force a pipeline into position as this may result in distortion of the valve body.
Care and Maintenance
Fivalco butterfly valves require no regular maintenance, however, it is advisable to inspect and verify proper operation of the unit
annually or in accordance with the requirements of the authority having jurisdiction.
The inspection should include a visual check for leakage at the valve pipe connection and body to operator connection. Inspection
and maintenance should be performed by a qualified inspection service.
Switch InstallationFivalco butterfly valves are provided with internal supervisor position switches. The tamper switch operates by a cam connected
to the valve stem. The switch will change position and close with two (2) full turns of the handwheel from the fully open position.
Switch 1#
For connection to the supervisory circuit
Normally Open: 1 Yellow
Normally Closed: 1 Red
Common: 1 White
Switch 2#
Auxiliary switch connected per authority
Normally Open: 1 Blue
Normally Closed: 1 OrangeCommon: 1 Black
Ground Lead: 1 Green
Dimensions (mm)
Valve Size Part Number H D L K WDN50~ DN150 S2000 - 40 100 120 115 145 110
DN200~DN300 S2000 - 50 115 170 162 200 165
Materials List
Part Name Material EN Spec. ASTM Spec.
Housing Cast Iron EN-JL1040 A126 Class B
Cover Cast Iron EN-JL1040 A126 Class B
Worm Gear Carbon Steel BS970 060A47 AISI 1045
Segment Gear Ductile Iron EN-JS1050 A536 65-45-12
Handwheel Cast Iron EN-JL1040 A126 Class B
Butterfly Valve
Gear Actuator with Tamper Switch
SWITCH WIRE OPTION