USS ALBACORE (AGSS-569)

Historic Mechanical Engineering LandmarkMay 13, 2000

Portsmouth, New Hampshire

ASME International

Official Photograph U.S. Navy

Praenuntius Futuri(Forerunner of the Future)

Albacore’s motto, Praenuntius Futuri(Forerunner of the Future) describes herpurpose well. She was intended as thetest vessel for a generation of submarinedesign innovations that would point theway for submarines of the future.

Albacore’s mission was experimental.She was meant to be modified, modifiedagain and then again in a series of con-figurations designed to test submarinehydrodynamics. The Albacore is anexample of the value of testing andexperimentation to the engineering pro-fession and the design process. Also, thepioneering engineers and technicianswho worked on her were unknowinglydevelopingthe roots of anew techni-cal disci-pline, OceanEngineering.

The ussA l b a c o r eserved as thefloating sub-m a r i n edesign labo-ratory for 19y e a r s .During this time period she underwentfive re-fits or phase conversions to testand evaluate new concepts. Much of theequipment developed and tested on theAlbacore was fitted onto other sub-marines in the United States Navy. Themarriage of the hull form pioneered onthe Albacore with nuclear power tech-nology pioneered in the USS Nautilusresulted in the first submarines capableof sustained underwater performance.

IntroductionSubmarine operations during WorldWar II demonstrated to the UnitedStates Navy the importance of underwa-ter speed, maneuverability andendurance. Following the war, theUndersea Warfare Committee of theNational Science Foundation issued aset of design recommendations to meetthese needs. They called for a subma-

rine with a streamlined hull constructedof new high strength steel. After manydebates, the decision was made to buildan experimental submarine incorporat-ing the recommendations of the com-mittee before proceeding with thedesign of a military version. Where subshad always been surface vessels thatcould avoid detection, for the first time,a submarine was to be designed as avessel meant to operate under the seainstead of on the surface. This meant acomplete change in design philosophy.

Like everything that involves radicalchange, the design issues were a sub-ject of hot debate in the submarinecommunity. The Albacore was going totest the new designs and settle thearguments once and for all.

In order todeterminethe opti-mum shapefor the outerhull, thedes igner smade exten-s ive test sus ing thetowing tankat the DavidT a y l o rModel Basinand at the

Langley full scale tunnel. [The DavidTaylor Model Basin is also an ASMELandmark.] The original shape selectedfor study was based upon the form of theR101, a World War I dirigible.Eventually, the data from these tests waspublished in a document called Series 58.In order to obtain data at high Reynoldsnumbers, large-scale models of theAlbacore were tested in a wind tunnel.As a result of all these tests, the optimumshape and dimensions were determined.

Design andConstruction

As first proposed by Rear AdmiralCharles Momsen, Assistant Chief of NavalOperations for Undersea Warfare andinventor of the Momsen Lung, Albacorewas to be a “target” used for anti-subma-rine warfare practice. This ruse was nec-

essary in order to get the approval tobuild her At the time, aircraft carriershad replaced the battleship as the navy’spremier vessel. Since submarines wereaircraft carriers’ most feared adversary,approval to build her as a training toolcame quickly. As a “target,” Albacorewould also be unarmed, which meanther designers would not be restricted bythe requirements of numerous navaldesign bureaus responsible for differentaspects of naval combat ships. Thedesigners were free to follow Momsen’sorders, “When in doubt, think speed.”

Her keel was laid on March 15, 1952.The hull was made from a new type ofsteel, HY-80. HY-80 had yield strengths of80,000 PSI, greater than any other steelavailable. This was the first application ofthat steel for a submarine pressure hull.But even with high strength steel, thedimensional restrictions required by thehull shape posed design difficulties. Thehull was shorter and wider than that ofWWII submarines. In order to maintainthe minimum number of watertight com-partments, the internal bulkheads had tobe placed close together; a fact that madeinternal arrangements more difficult.

As originally built, her control planes andrudders were positioned aft of the pro-peller in a cruciform, or “+” configura-tion. She also had a small dorsal rudderfitted on the rear portion of the sail. Theplacement of control planes and rudderswith respect to the propellers was a topicof many debates in the submarine com-munity. Another topic of debate was thesingle propeller placed on the centerlineof the hull. While this provided anincrease in propulsive efficiency, it wasnot an accepted practice at the time.Albacore would be used to test variouscontrol designs and to correlate actualsea trial performance with that predictedin tow-tank tests.

Service History andTesting Operations

Albacore was launched on August 1,1953and commissioned on December 5,1953.

After her initial Phase I testing was com-pleted, Albacore returned to PortsmouthNaval Shipyard in December of 1955, for

her Phase II conversion. The dorsal rud-der mounted behind the sail wasremoved. It had also been found thatmounting the rudders aft of the screwcaused high stresses in the structuralsupport members. Therefore, the rud-ders and diving planes were moved for-ward of the screw. Later, her screw wasreplaced with one larger in diameterBecause of the effectiveness of the sterndiving planes, the bow diving planeswere also removed.

By this time, the basic teardrop hull formpioneered by Albacore had become stan-dard for U.S. nuclear submarines, andother nations had begun to adopt similarshapes for their hulls.

She entered the shipyard again inNovember 1960 to begin her Phase IIIconversion. She emerged in August 1961with a radical “X” configuration of sternplanes. This configuration became popu-lar with foreign submarine designers buthas never reappeared on U.S. sub-marines. Other changes included addinga larger rudder behind the sail, divebrakes around her middle, and newsonar During this time, she also tested anew towed sonar array Towed sonararrays, towed behind the submarine, arenow standard on modern submarines.

One interesting side note during thisphase was the installation of a para-chute on Albacore. A B-47 bomber dragchute was borrowed from nearby PeaseAir Force Base and deployed underwa-ter in a series emergency stopping tests.While the concept did not make it pastthe testing phase, itdoes demonstratecreativity at workand the value of theAlbacore as a testvehicle.

The distance between these two screwswas varied throughout the testing period.A photographic system was installed fordirect observation of the cavitation charac-teristics of the propellers. It was at this timethat high capacity silver-zinc batteriesreplaced the usual lead-acid type. Thesenew batteries provided the submarinewith three times the power of the old lead-acid type and effectively doubled the avail-able shaft horsepower for short duration.Also, an emergency main ballast tankblow system, part of the “Subsafe” pro-gram, was added in response to theThresher disaster Another innovationwas the testing of the “fly-around-body”, aremote controlled underwater kite used todeploy antenna systems.

The fifth, and final, phase conversion wasfor a series of tests to increase speed.That system, and the results of the testare still classified.

Albacore twice set world submergedspeed records. She was also awarded theNavy’s Battle Efficiency Pennant and wasgranted permission to display the White“E” for overall readiness to perform herassigned mission.

Albacore TodayAlbacore was decommissioned onDecember 1, 1972 and placed in thereserve fleet in Philadelphia. In 1982, acitizens group began the process of bring-ing the Albacore back to Portsmouth, NH,as a tangible monument to the area’snaval heritage. On May 3, 1985, the Navy

the submarine to thePortsmouth SubmarineMemorial Association. Shewas towed back toPortsmouth in 1984. A perma-nent display site was selected

transferred responsibility for

Her Phase IV conver- that was one-quarter milesion took from inland and 27 feet higher thanDecember 1962 to the Piscataqua River. MovingMarch 1965. The the Albacore required disman-single screw was tling 30 feet of railway trestle,replaced with two concentric counter- crossing a four-lane highway and finallyrotating propellers. These were installed to lifting it above the level of the river. Thistest the capability to harness the power of was done by enclosing the submarine innuclear steam-turbine power plants with- a series of earthen “locks” and literallyout noisy reduction gears and to attempt a floating her into position. She was set onfurther increase in propulsive efficiency. her cradle on October 3, 1985 and

opened to the public on August 30, 1986.

ASME History andHeritage Program

The ASME History and Heritage RecognitionProgram began in September 1971. To imple-ment and achieve its goals, ASME formed aHistory and Heritage Committee, composed ofmechanical engineers, historians of technolo-gy, and the Curator Emeritus of Mechanicaland Civil Engineering at the SmithsonianInstitution. The committee provides a publicservice by examining, noting, recording, andacknowledging mechanical engineeringachievements of particular significance. TheHistory and Heritage Committee is part of theASME Council on Public Affairs and Board onPublic Information. For further information,please contact Public Information, ASME,Three Park Avenue, New York, NY 10016-5990, 212-591-7740; fax 212-591-8676.

An ASME landmark represents a progressivestep in the evolution of mechanical engineer-ing. Site designations note an event or devel-opment of clear historical importance tomechanical engineers. Collections mark thecontributions of several objects with specialsignificance to the historical development ofmechanical engineering.

The ASME Historic Mechanical EngineeringRecognition Program illustrates our technolog-ical heritage and serves to encourage thepreservation of the physical remains of histor-ically important works. It provides an anno-tated roster for engineers, students, educators,historians, and travelers, and helps establishpersistent reminders of where we have beenand where we are going along the divergentpaths of discovery. The USS Albacore is the209th Historic Mechanical EngineeringLandmark designated by ASME.

The ASME History andHeritage Committee

J. Lawrence Lee, ChairRobert M. Vogel, SecretaryWilliam J. Adams, Jr.William DeFotisR. Michael HuntPaul J. TorpeyDiane Kaylor, Staff Liaison

The American Society ofMechanical Engineers

Robert E. Nickell, PresidentFred E. Angilly, Vice President, Region IFrank C. Adamek, Vice President, EnergyResources GroupJoseph A. Nunes, H & H Chair, Region IHarry Armen, Senior Vice President., Councilon Public AffairsVictoria A. Rockwell, Vice President, PublicInformationDavid L. Belden, Executive DirectorBurton Dicht, Director, Northeast RegionalOffice

Ocean, Offshore and ArcticEngineering Division

Stephen J. Liu, ChairJohn T. Robinson, Vice ChairAlan Murray, SecretaryCengiz Eretekin, Treasurer

The purpose of the Ocean, Offshore andArctic Engineering Division of the AmericanSociety of Mechanical Engineers is to promotetechnical advancement of and internationalcooperation in the engineering sciences relat-ed to the oceans and the arctic

Northern New England Section

J. Richard Neff, ChairFrederick I Wakefield, Vice ChairStephen M. Floyd, SecretaryKathryn E. Heselbarth, Treasurer

Albacore ParkAGSS-5699

A National Historic Landmark

First Hydrodynamic Submarine

Authorized November 24,195O

Keel Laid March 15,1952

Launched August 1,1953

Commissioned December 5,1953

World's Fastest Submarine 1966

DecommissionedDecember 1, 1972

Arrived at Albacore ParkMay 4,1985

Joseph Sawtelle, PresidentBoard of Directors

ASME CeremonyCommittee Members

Prof. E. Eugene AlhnendhrgerMr. Russ VanBilliard

Our Thanks To:Portsmouth Naval Shipyard

for their assistance

The Portsmouth Sheratonfor their support

The Officers and Crew ofUSS Albcore

You can visit the Albacore at thePort of Portsmouth Maritime

Museum & Albacore Park600 Market Street, Portsmouth,

NH 03801 (603)436-3680

was able to refine these designs before incorporating them into

the fleet. The USS Albacore is tangible evidence of the value of

testing and experimentation to the engineering profession.

change in submarine design. Experience in World War II had shown that speed, endurance and

maneuverability were key requirements for submarines. As a result of this experience, Albacore’s

hull was designed with underwater speed as the prime

requirement. She was also built with a newly

developed high-strength steel.

Along with these two innovations,

USS ALBACORE (AGSS-569)Statement of Significance

The submarine USS Albacore, AGSS-569 (Auxiliary General Submarine) inaugurated a radical

Albacore was to serve as a test vessel for the newest designs in submarine technology.

Throughout her career she tested many innovative concepts. As a result, the United States Navy

HISTORIC MECHANICAL ENGINEERING LANDMARK

U.S.S. ALBACORE

DECEMBER 1953

THE USS ALBACORE WAS THE FIRST NAVY-DESIGNEDVESSEL WITH A TRUE SUBMARINE HULL FORM, IN WHICH SUR-FACE CHARACTERISTICS WERE SUBORDINATED TO REQUIREMENTSOF UNDERWATER PERFORMANCE. THE ALBACORE’S UNIQUE TEARDROP-SHAPED HULLDESIGN, THE RESULT OF YEARS OF EXTENSIVE MODEL TESTING, ENABLED HER TO SET TWONEW UNDERWATER SPEED RECORDS WITH IMPROVED CONTROL. DURING HER NINETEENYEARS OF SERVICE, THE ALBACORE CARRIED OUT TESTS OF SPEED, DEPTH CHANGES, ANDUNDERWATER MANEUVERING. PROVING ITS SUCCESS, THE ALBACORE’S HULL DESIGNBECAME THE MODEL FOR ALL FUTURE U.S. NAVY SUBMARINES THAT FOLLOWED.

THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS

2000

A Partial Listing of ConceptsTested on Albacore:

� Body of Revolution Hull with Propeller Mounted on Axis� Low L/D Ratio of 7.5:1� HY-80 Steel� Stern Plane Placement Forward of Propeller� Counter-Rotating Propellers� Underwater Dive Brakes� Towed Sonar Arrays� Silver-Zinc Batteries� Sound Dampening Technology� High Pressure Hydraulic System� Fly-Around-Body Antenna Deployment System� Light Wright Radial Diesel Engines� “X” Shaped Stern� Dorsal Rudder� Single Stick “Aircraft” Type Controls

Principle Ship Characteristics

Length: 205.3 feet (62.6 m)Beam: 27.3 feet (8.3 m)Draft: 18.6 feet (5.7 m)Surface Displacement: 1692 tonsSubmerged Displacement: 1908 tonsTest Depth: 600 feet (182.9 m)Collapse Depth: 1170 feet (356.6 m)

Power Plant:Two(2) General Motors 16-cylinder, two cycle radialdiesel engines, 1000 BHP eachGenerators:Two(2) Elliot 710 volt, 1150 amp single armature, 817 KW eachPropulsion Motors:Two(2) General Electric double armature, 730/925 VDC,8000 amp per armature, 50-250 rpm,7500 HP eachPropulsion Surfaced:(Diesel-Electric Drive), Speed: 12 KnotsPropulsion Submerged:7500 SHP (Lead-Acid Batteries), Speed: 25 KnotsPropulsion Submerged:15,000 SHP (Silver-Zinc Batteries), Speed: over 25 KnotsCrew: 5 officers, 50 enlisted

H209