usb2i2c_demo debugging steps
DESCRIPTION
USB 2 I2C IIC_DEMO Debugging StepsTRANSCRIPT
1
Wuxi SuTeng Solid Digital Technologies Co ,.Ltd
Tel:+86‐510‐85387391 Fax:+86‐510‐85387691
Web:www.soliddigi.com Mail:[email protected]
Online store:www.soliddepot.com Skype :jessicadong6
USB to I2C IIC_DEMODebugging Steps 1:Install hardware driver
Plug USB2I2C_DRIVER hardware in as following picture shows:
Select” Install from a list or specific location”, and than click NEXT
www.soliddigi.com www.soliddepot.com
SOLIDDIGI Technologies Inc
2
Click” Browse”, and Select “USB2I2C_DRIVER”Folder,as shown below:
Click “OK”
www.soliddigi.com www.soliddepot.com
SOLIDDIGI Technologies Inc
3
Auto Install;
Driver installation done。
2:Hardware Debug
(1) USB2I2C_DEMO interface to connect to a 24 series small‐capacity EEPROM
www.soliddigi.com www.soliddepot.com
SOLIDDIGI Technologies Inc
4
(2) Input the EEPROM address of the data you want to write, for example, 11H input data is
33H
(3) Click “Write”
www.soliddigi.com www.soliddepot.com
SOLIDDIGI Technologies Inc
5
Write successfully
(4) Delete Date(Use Backspace key)
(5) Open up USB2I2C_DEMO debug window again. Enter 11h in Data addr, and click read.
(6) Read data just wrote in.
(7)Change another EEPROM’s Addr, and click read,read FFH only(Because of no data
wrote in)
www.soliddigi.com www.soliddepot.com
SOLIDDIGI Technologies Inc
6
Note:
1) Other operations are following this way, please debug yourself.
2) The origin file of VC++ 6.0 is in English and is provided together.
www.soliddigi.com www.soliddepot.com
SOLIDDIGI Technologies Inc