update on the analysis of s2 burst hardware injections

15
LIGO-G030428-00-Z Update on the Analysis of S2 Burst Hardware Injections L. Cadonati (MIT), A. Weinstein (CIT) for the Burst group Hannover LSC meeting, August 20, 2003

Upload: cosima

Post on 01-Feb-2016

26 views

Category:

Documents


0 download

DESCRIPTION

Update on the Analysis of S2 Burst Hardware Injections. L. Cadonati (MIT), A. Weinstein (CIT) for the Burst group Hannover LSC meeting, August 20, 2003. Frequency f 0 (Hz) Duration (msec). 100 90. 153 58. 235 38. 361 25. 554 16. 850 11. 1304 7. 2000 4.5. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: Update on the Analysis  of S2 Burst Hardware Injections

LIGO-G030428-00-Z

Update on the Analysis of S2 Burst Hardware Injections

L. Cadonati (MIT), A. Weinstein (CIT)

for the Burst group

Hannover LSC meeting, August 20, 2003

Page 2: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

2LIGO-G030428-00-Z

S2 Burst Hardware Injections

For details on the injections and the analysis: AJW’s presentation at the march LSC meeting LIGO-G030081-00-Z http://ligo.mit.edu/~cadonati/S2/Inject/S2injections.html

Frequency f0 (Hz)Duration (msec)

100

90

153

58

23538

361

25

55416

850

11

13047

2000

4.5Time from segment start

t0 (sec) 20 40 60 80100

120

140 160

Short, narrow-bandwidth signals (sine-Gaussians). Signal amplitudes should span the range from "barely detectable" to "large, but not so

large as to break lock". Each sine-Gaussian has Q ~ 9; total duration ~ Q/f0

Page 3: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

3LIGO-G030428-00-Z

Use of Harwdare Injections in the Burst Analysis

Test of Event Trigger Generator sensitivity, time, frequency, amplitude resolution

Validation of software injection code Test of correlation/coincidence techniques Veto safety studies

The work presented here is preliminary: better resolution, burst parameter estimation will soon be available from the new burstDSO (J. Sylvestre)

New calibration files recently became available – will be used in comparison with software simulation engine

Page 4: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

4LIGO-G030428-00-Z

POWER

L1 injections (pre and intra-run)TFCLUSTERS

Detected at wrong frequency (noise?)

TFCLUSTERS (settings as in the online run) failed to detect some loud events. This is being addressed in the new release of TFCLUSTERS and the burstDSO.

for sine gaussians

Page 5: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

5LIGO-G030428-00-Z

L1 stationarity

Intra-run injections reconstructed with TFCLUSTERS (still old setup - some are missed)

Sine gaussians, Q=9 and:

235, 361, 554, 850 Hz

2x10-16 m/sqrt(Hz)

100, 150, 1304 and 2000 Hz

8x10-16 m/sqrt(Hz)

log 1

0(p

ow

er

)

Failed the frequency cut

Uncalibrated, detected power vs time

log 1

0(p

ow

er

)

Up to 1 order of magnitude fluctuations in the detected power

Page 6: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

6LIGO-G030428-00-Z

L1 Dots: hardware Crosses: software

Hardware injections: » Q=9 sine gaussians

Software injections: » Q=9 sine gaussians, at 23 times

uniformly distributed in the S2 playground

» Calibration taken care of in LDAS (respfilt function in DataCond)

Agreement:» fits of response versus hpeak

» 20-50% with power law 2 constrained

USED ONLINE CALIBRATION» will repeat with new calibration (V02)

and with implementation of the parameter estimator (hrss vs hrss)

log10(power) detected vs hpeak

Hardware vs software injections

log 1

0(p

ower

)

log 1

0(p

ower

)

log 1

0(p

ower

)

log 1

0(p

ower

)

log 1

0(p

ower

)

log 1

0(p

ower

)

log 1

0(p

ower

)

log 1

0(p

ower

)

Page 7: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

7LIGO-G030428-00-Z

With EXCESS POWER

L1

log10(SNR) detected vs hpeak

Page 8: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

8LIGO-G030428-00-Z

POWERTFCLUSTERS

H1 injections (pre and intra-run)

Page 9: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

9LIGO-G030428-00-Z

H1 stationarity

Intra-run injections reconstructed with TFCLUSTERS (still old setup - some are missed)

Sine gaussians, Q=9 and:

235, 361, 554, 850 Hz

2.6x10-16 m/sqrt(Hz)

100, 150, 1304 and 2000 Hz

1x10-15 m/sqrt(Hz)

log

10(p

ow

er

)

Failed the frequency cut

Uncalibrated, detected power vs time

log

10(p

ow

er

)

Largest fluctuation at low frequency (100-153Hz)

Page 10: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

10LIGO-G030428-00-Z

H1TFCLUSTERS POWER

Page 11: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

11LIGO-G030428-00-Z

H2 - TFCLUSTERS

Page 12: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

12LIGO-G030428-00-Z

H2 stationarity

Intra-run injections reconstructed with TFCLUSTERS (still old setup - some are missed)

Sine gaussians, Q=9 and:

235, 361, 554, 850 Hz

4x10-16 m/sqrt(Hz)

100, 150, 1304 and 2000 Hz

8x10-16 m/sqrt(Hz)

100 Hz 4x10-15 m/sqrt(Hz)

log

10(p

ow

er

)

Failed the frequency cut

Uncalibrated, detected power vs time

log

10(p

ow

er

)

Large fluctuation at low frequency (100-153Hz)

Page 13: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

13LIGO-G030428-00-Z

H2TFCLUSTERS POWER

Page 14: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

14LIGO-G030428-00-Z

Veto safety studies (Ito, Schofield)

H1

The position of this cut Is not decided yet!

do not allow veto

allow veto

Study veto safety with hardware injections

Page 15: Update on the Analysis  of S2 Burst Hardware Injections

Hannover LSC meeting, August 20, 2003

15LIGO-G030428-00-Z

WaveMon veto safety studies (S. Klimenko)

Time lag [s]

L1 HW injections

Used hardware injections to look for cross coupling between AS_Q and veto channels

Select qualified triggers by setting a threshold on strength of veto clusters.

» Lost <4% waveMon AS_Q triggers with this cut

In Progress:

Re-run WaveMon on-line on larger number of channels and wider frequency band.

Study of veto efficiency

ASQ

VETO