Features• Vitreous china

• Under-mount

• ADA compliant when installed in a 21″ (533 mm)minimum depth countertop

• With or without overflow

• Includes 1193643 clamp assembly

• 18″ (457 mm) x 12″ (305 mm) [K-2214, K-2214-G]

• 21″ (533 mm) x 14″ (356 mm) [K-2215]

Codes/Standards ApplicableSpecified model meets or exceeds the following:

• ASME A112.19.2/CSA B45.1

• ICC/ANSI A117.1

• ADA

UNDER-MOUNT BATHROOM SINKK-2214

ALSO K-2215

Colors/Finishes• 0: White

• Other: Refer to Price Book for additional colors/finishes

Accessories

• CP: Polished Chrome

• Other: Refer to Price Book for additional colors/finishes

Specified Model

Model Description Colors/FinishesK-2214 Under-mount bathroom sink with overflow ❑ 0 ❑ Other_____K-2214-G Under-mount bathroom sink with glazed underside, less overflow ❑ 0 ❑ Other_____K-2215 Under-mount bathroom sink with overflow ❑ 0 ❑ Other_____

Recommended AccessoriesK-8998 Adjustable P-Trap ❑ CP ❑ Other_____

Product SpecificationThe under-mount bathroom sink shall be made of vitreous china. Bathroom sink shall be 18″ (457 mm) in length and 12″ (305mm) in width [K-2214, K-2214-G], or 21″ (533 mm) in length and 14″ (356 mm) in width [K-2215]. Bathroom sink shall be ADAcompliant when installed in a 21″ (533 mm) minimum depth countertop. Bathroom sink shall be with overflow [K-2214, K-2215]or less overflow [K-2214-G]. Bathroom sink shall include 1193643 clamp assembly. Bathroom sink shall be Kohler ModelK-______-______ or K-2214-G-______.

LADENA®

Page 1 of 2106355-4-CP

USA/Canada: 1-800-4KOHLER(1-800-456-4537)www.kohler.com

Technical Information

Fixture*:Basin area K-2214,

K-2214-G18-3/8″ (467 mm) x11-5/8″ (295 mm)

K-2215 20-7/16″ (519 mm) x13-1/2″ (343 mm)

Water depth 4-5/8″ (117 mm)Drain hole Ø 1-3/4″ (44 mm)* Approximate measurements for comparison only.

Cutout template – K-2214 and K-2214-G 1053195-7Cutout template – K-2215 1002977-7

Included components:Basin clamp assembly 1193643

Installation NotesInstall this product according to the installation guide.

The product diagram is based on the K-8998 adjustableP-Trap with 1″ (25 mm) of tailpiece exposed.NOTICE: Countertop manufacturer or cutter must use thecurrent product template available at www.kohler.com, or bycalling 1-800-4KOHLER. Kohler Co. is not responsible forcutout errors when the incorrect cutout template is used.

Will comply with ADA when installed per section 606Lavatories and Sinks of the 2010 ADA Standards forAccessible Design.

Recommended ADA Installation

Standard Installation

24" (610 mm)(X)

3/8" Cold

1-1/4" OD

3/8" Hot

4" (102 mm)

Lof FittingC

(Y)

1/2" (13 mm)

5/8" (16 mm)

Sealant3/8" (10 mm)

K-2214-G: (X)= 20-7/8" (530 mm), (Y)= 14-3/8" (365 mm)

K-2214: (X)= 20-7/8" (530 mm), (Y)= 14-3/8" (365 mm)

K-2215: (X)= 23-1/4" (591 mm), (Y)= 16-1/4" (413 mm)

4-3/4" (121 mm)

1-1/8" (29 mm)

14"(356 mm)

13-3/4" (349 mm)

8-1/8" (206 mm)

34"(864 mm)

4"(102 mm)

27"(686 mm) Min

8"(203 mm) Min

9"(229 mm) Min

6" (152 mm) Max

Marble Installation

Wood Installation

Sealant

1" (25 mm) Max

Product Diagram

LADENA®

LADENA® UNDER-MOUNT BATHROOM SINKPage 2 of 2106355-4-CP