tugas akhir d4 - etd.repository.ugm.ac.id
TRANSCRIPT
100
DAFTAR PUSTAKA
Dynamics Research Corporation, 1992, Techniques For Digitizing Rotary and Linear
Motion.
H.D. Kwon, M. Burdekin, Development and application of a system for evaluating the feed-
drive errors on computer numerically controlled machine tools, Precision Engineering
19 (2/3) (1996) 133–140.
T. Schmitz, J.C. Ziegert, Dynamic evaluation of spatial CNC contouring accuracy, Precision
Engineering 24 (2000) 99–118..
H. Qiu, Y. Li, Y. Li, A new method and device for motion accuracy measurement of NC
machine tools. Part 1: Principle and equipment, International Journal of Machine Tools
and Manufacture 41 (2001) 521–534.
H. Qiu, Y. Li, Y. Li, A New method and device for motion accuracy measurement of NC
machine tools. Part 2: Device error identification and trajectory measurement of
general planar motions, International Journal of Machine Tools and Manufacture 41
(2001) 535–554.
K. Iwasawa, A. Iwama, K. Mitsui, Development of a measuring method for several types of
programmed tool paths for NC machine tools using a laser displacement interferometer
and a rotary encoder, Precision Engineering 28 (2004) 399–408.
Krar. Stephen F, Gill. Arthur, 1999, Computer Numerical Control Programming Basics, 200
Madison Avenue, New York, NY 10016.
H.L. Liu, H.M. Shi, B. Li, X. Li, A, new method and instrument for measuring circular
motion error of NC machine tools, International Journal of Machine Tools and
Manufacture 45 (2005) 1347–1351.
H. Iwai, K. Mitsui, Development of measuring method for motion accuracy of NC machine
tools using links and rotary encoders, International Journal of Machine Tools &
Manufacture 49 (2009) 99–108
Pengembangan dan Kalibrasi Alat Ukur Berbasis Encoder di Mesin CNCYUDI OKTRIADI, Muslim Mahardika, S.T., M.Eng., Ph.DUniversitas Gadjah Mada, 2018 | Diunduh dari http://etd.repository.ugm.ac.id/