true hole production class cnc plasma systems · • ethercat single cable connection for cnc...
TRANSCRIPT
• High-def HPR130XD, HPR260XD, HPR400XD or HPR800XD plasma cutter• Automatic Gas control is standard• EDGE Connect controller with Phoenix cutting software• ProNest advanced nesting software with True Hole module• Fully integrated automatic torch height control & torch collision protection• Unitized systems w/cut areas from 5’ x 10’ to 12’ x 40’ (water table or downdraft)• Gantry systems with cut areas in any size to 20’ W x 100’ L (water table or downdraft) • Dual side drives on rail axis• Structural double frame with a 3/16” walled tub• Heavy ‘T’ guide rails with 2” steel rollers on the rail axis• Dual linear slides on the cross axis• Helical gear rack for precision and a fully enclosed power track for potection• Synchronized AC brushless servo motors drive direct coupled precision gear boxes, which ride on pneumatic pre-loaders• Full motion and nesting software are standard features• Options: straightline bevel, oxy-fuel cutting, scribe, drills & integrated pipe cutters
True Hole Production Class CNC Plasma Systems
Each system comes with a complete software package that’s ready for production. In addition, Hypertherm has many options available for ProNest as well. Water tables feature manual valve water level control, allowing water levels from a dry bottom to full table in 3 minutes and back to a dry bottom in another 3 minutes. Our downdraft tables are pneumatically zoned to reduce the collection area to no more than 4 lineal feet at one time, thus reducing the CFM requirements and increasing efficiency. Water tables are a much more effective system for collecting the dust and smoke emissions inherent to the plasma cutter.
© 2016 Victory CNC Plasma Systems Printed in Owensboro, KY USA www.victoryplasma.com TH_REV_1607
877.683.6844 Sales | [email protected] 1500 Bluff Ave., Owensboro, KY 42303 | victoryplasma.com
• Phoenix cutting software
• 19” touchscreen • Quadcore processor and internal Solid State drive • Hypertherm Phoenix® software & SureCut technology• Wifi and USB are standard • Watch Windows for real-time monitoring • Integrated communications with plasma & torch height control• Designed for plasma marking & cutting (including tube/pipe), oxy-fuel cutting• EtherCAT single cable connection for CNC controller, drives & HPR plasma• Remote Help enables diagnosis and repair over the Internet
EDGE Pro Controller Features
True Hole is effective for holes up to 1” diameter and hole diameter to thickness ratios from 2.5 to as low as 1:1. True Hole is a combination of the following, linked to given amperage, material type, material thickness and hole size:• Process gas type • Piercing methodology• Gas flow • Lead in/lead out technique• Amperage • Cut speed
• Phoenix cutting softwareSystem Features
Each machine is completed with plasma cutter installed and fully tested in our plant before shipment. We deliver and set the machine up ready for production and we stay with you for hands on operational training. All Victory systems are to easy to operate, easy to maintain and built to last. We manufacture, market and support all our equipment.