training calendar: year 2015-16 · 7 got training prerequisites participants are expected to know...

Training Calendar: Year 2015-16

Mitsubishi FA Products Training

Factory Automation Engineering Centre Factory Automation & Industrial Division

Mitsubishi Electric India Private Limited India

2

Index

1. TRAINING CENTRES ........................................................................................................................... 3

2. LIST OF REGULAR TRAINING COURSES ............................................................................................... 4

3. MITSUBISHI FA PRODUCT TRAINING CALENDAR: YEAR 2015-16 ......................................................... 5

4. DETAILED AGENDA OF REGULAR TRAINING COURSES: MELCO FA PRODUCTS ..................................... 6

FX PLC TRAINING ......................................................................................................................................... 6

GOT TRAINING ............................................................................................................................................. 7

Q PLC & CC-LINK BASIC TRAINING .................................................................................................................. 8

Q NETWORKING (ADVANCED NETWORKING) TRAINING ...................................................................................... 10

POSITIONING TRAINING ................................................................................................................................ 11

VFD (INVERTER) TRAINING ........................................................................................................................... 13

Q MOTION TRAINING .................................................................................................................................. 14

SIMPLE MOTION TRAINING ........................................................................................................................... 16

L SERIES PLC BASIC & BUILT IN POSITIONING TRAINING ..................................................................................... 17

IQR PLC TRAINING ..................................................................................................................................... 19

ROBOT TRAINING ........................................................................................................................................ 21

MC WORKS64 SCADA TRAINING ................................................................................................................. 23

5. DETAILED AGENDA OF REGULAR TRAINING COURSES: MEI FA PRODUCTS ........................................ 25

NEXGENIE 1000 PLC TRAINING ..................................................................................................................... 25

NEXGENIE 2000 PLUS PLC TRAINING ............................................................................................................. 27

GOC TRAINING .......................................................................................................................................... 29

6. CUSTOMIZED TRAINING PROGRAMMES .......................................................................................... 30

7. TRAINING CHARGES AND INSTRUCTIONS FOR REGISTRATION .......................................................... 31

8. TRAINING REQUEST FORM .............................................................................................................. 32

3

1. Training Centres Regular training is arranged at following centres:

Pune Centre

Mitsubishi Electric India Private Limited Factory Automation & Industrial Division, EL-3, J Block, MIDC Bhosari,

Pune, Maharashtra India – 411 026 Tel.: +91-20-2710 2000 Fax: +91-20-2710 2100

Gurgaon Centre

Mitsubishi Electric India Private Limited Factory Automation & Industrial Division,

2nd Floor, Tower A & B, DLF Cyber Greens, DLF Cyber City, DLF Phase III, Gurgaon, Haryana, India -122 002 Tel.: +91-124-4630300 Fax: +91-124-4630399

Bangalore Centre

Mitsubishi Electric India Private Limited Factory Automation & Industrial Division,

Prestige Emerald, 6th Floor, Municipal No. 2, Madras Bank Road, (Lavelle Road), Bangalore, Karnataka, India -560001 Tel: +91-80- 4020-1600 Fax: +91-80- 4020-1699

Chennai Centre

Mitsubishi Electric India Private Limited Factory Automation & Industrial Division, No.1 Vivekananda Road, Srinivasa Nagar Off Spur Tank Road, Chetpet Chennai, Tamil Nadu India – 600 031 Tel: +91-44-49232222 Fax: +91-44-49232249

Ahmedabad Centre

Mitsubishi Electric India Private Limited Factory Automation & Industrial Division, B/4, 3rd floor, Safal Profitaire, Corporate Road, Prahaladnagar, Satellite, Ahmedabad, Gujrat India – 380 015 Tel. : +91-79-65120063

www.MitsubishiElectric.in

Email: [email protected]

mailto:[email protected]

4

2. List of Regular Training Courses Following training courses are regularly offered from our all training centres mentioned in previous section.

No. Training

Code Duration

(Days) Brief Agenda

1 FX PLC 2 Includes FX3U/3G Basic and Advanced Programming, Analog interfacing using Blocks & ADP, and Interrupt Functions like Input, Timers and Counter

2 GOT 2 Includes GOT1000 / GT2000 series hardware, GT Designer programming, Basic & advanced features, Recipes & Alarms, Ladder Monitoring & Editing, Backup & Restore function. Different types of connections with PLC / Controllers, etc.

3 Q PLC 3 Includes QnUDEH/QnUDV PLC Hardware, Basic and Advanced programming, Analog I/O modules, programming using GxWorks2 and CC-Link Open network basic training.

4 Position 3 Includes positioning basics, FX Positioning using FX3U inbuilt high speed I/O and Positioning Instructions, Q Positioning using QD75 /QD77 modules (P/D/M/MH) with pulse type and SSCNET based servo amplifier.

5 Q Motion 3

Includes Mitsubishi make Q17nD/DS motion CPUs with MR-J4-B /J3-B type servo amplifiers, MT-Developer-II programming platform, Real Mode (SV13) and Virtual Mode (SV22), SFC programming, Mechanical System Editor, CAM configuration and monitoring and debugging.

6 Simple Motion

2 QD77MSn module range, Simple Motion Function, Configuration of Mechanical system, CAM design, operation, etc.

7 Q Network 3 CC-link advanced function like PLC to PLC communication, CC-Link IE : Field and control, MelsecNet/H : Control and remote I/O network

8 L PLC 3 Includes L series Hardware, Basic and Advanced programming using GXWorks2, Analog I/O modules, Inbuilt Position using pulse type servo like MR-JE/MR-J4A

9 iQR PLC 3 Includes R series PLC Hardware, Basic and Advanced programming, Analog I/O modules, programming using GxWorks3 and Open network basic training.

10 Robot 3

Introduction to MELFA Robot series and hardware, Types of Robot Controller and Manipulators Robot Mastering & Robot Parameters, Device configuration, Control power & Wiring of user control (CNUSR), Wiring of External Inputs and Outputs Operation panel, T/B, Jog operation, Hand operation.

11 VFD 2

FR-700 series of Inverters, Parameters, Configurations and Connections for Signal & Power, V/F control, FR-Configurator, Error & Warnings, Troubleshooting, Accessories like reactors & BU, Communication with PLCs though Serial, CC-Link, other protocols, Advanced Features, Energy Saving Drives, etc.

12 MC Works 2 Introduction to MC Works64 , Architecture of MC Works64 OPC Tags, Data Connections & Browsers, Customizing the Workbench, GraphWorx64 Layout & Screen Designing & Alarm Generation.

13 NG1K 2 Nexgenie 1000 PLC hardware, Base & Expansion Units, Memory Organization, DI/DO and Analog I/O, Connection & Configuration, Programming using CoDeSys, Troubleshooting & Maintenance issues, etc.

14 NG2KP 3

Nexgenie 2000PLUS PLC hardware, Base & Expansion Modules, Memory Organization, DI/DO and Analog I/O, Connection & Configuration, Programming using CoDeSys, Modbus Network, Communication FBs, Troubleshooting & Maintenance issues, etc.

15 GOC 2 Includes GOC series hardware, PLC programming, HMI Screen Design /Various Objects, third party connectivity, etc.

5

3. Mitsubishi FA Product Training Calendar: Year 2015-16

2 days 2 days 3 days 3 days 3 days 2 days 3 days 3 days 3 days 3 days 2 days 2 days 2 days 3 days 2 days

Pune 13-14 15-16 20-22 27-29

Gurgaon 27-28 29-30 13-15 20-22

Bangalore 20-21 22-23 16-17 1-2

Chennai 27-29 15-17 1-3

Ahmedabad 13-15 20-22 1-2

Pune 27-29 7-8 18-20 14-15

Gurgaon 18-20 25-27 7-8 11-12

Bangalore 25-27 18-20

Chennai 11-13 25-26

Ahmedabad 11-13 4-5

Pune 1-2 3-4 22-24 15-17 29-30 11-12

Gurgaon 1-3 15-16 22-24 25-26

Bangalore 22-24 1-3

Chennai 1-2 3-4 15-16 22-24 29-30

Ahmedabad 1-2 3-4 15-17

Pune 20-22 1-3 13-15 27-29

Gurgaon 27-28 29-30 13-15 20-22 1-3

Bangalore 13-14 15-16 20-22 27-29 1-3

Chennai 13-14 15-16 27-29 2-3

Ahmedabad 27-29 13-15 2-3

Pune 17-18 19-20 24-26 6-7

Gurgaon 24-26 17-19 10-11 6-7

Bangalore 17-19 24-26 3-4

Chennai 10-12 24-25

Ahmedabad 17-18 10-11 3-4

Pune 2-4 28-30 21-23 14-16 10-11

Gurgaon 23-25 2-4 14-16 28-30

Bangalore 14-16 28-30 2-4 21-23 7-8

Chennai 14-16 28-29

Ahmedabad 1-2 3-4 21-23 14-16

Pune 26-27 28-29 19-21 8-9 15-16

Gurgaon 19-21 26-28 12-13 8-9

Bangalore 26-27 28-29

Chennai 12-14 26-28 19-20

Ahmedabad 12-14 19-21 5-6

Pune 23-25 2-4

Gurgaon 23-24 2-4 9-10

Bangalore 2-4 23-25

Chennai 23-24 25-26 2-4

Ahmedabad 23-25 2-4

Pune 1-2 3-4 21-23 14-16 10-11 28-30

Gurgaon 14-15 16-17 21-23 2-4 28-30

Bangalore 28-29 21-23 2-4 7-8

Chennai 2-4 14-16 28-29 21-22

Ahmedabad 1-2 3-4 21-23 14-15

Pune 11-13 27-29 18-20

Gurgaon 18-20 11-13 27-29

Bangalore 11-12 13-14 20-22 27-29

Chennai 11-12 13-14 27-29

Ahmedabad 11-13 20-22 27-29

Pune 15-16 17-18 22-24 4-5 11-12

Gurgaon 22-23 24-25 15-17 11-12

Bangalore 3-5 22-24 8-9

Chennai 15-17 1-2 22-23

Ahmedabad 15-16 17-18 8-9

Pune 14-16 21-23 28-30 2-4

Gurgaon 28-30 2-4 14-16 21-23

Bangalore 14-15 3-4

Chennai 2-4 14-16

Ahmedabad 21-23 3-4

Oct

‘15

No

v ‘1

5D

ec

‘15

Jan

‘16

Feb

‘16

Mar

‘16

MC

WorksNG1K NG2KP GOC

Ap

ril ‘

15

May

‘15

Q

Network

Simple

Motion Q MotionQ PLC Position L PLC iQR PLC Robot VFDMonth

Jun

‘15

July

‘15

Au

g ‘1

5Se

pt

‘15

FA Centre

Training Modules

FX PLC GOT

6

4. Detailed Agenda of Regular Training Courses: MELCO FA Products

FX PLC Training

Prerequisites Participants are expected to know the number systems (Binary, Hex, BCD), basics of PLC, Basics of Electrical & Electronics etc.

Duration Two days

Training Session Timing Training Time 09:30 am to 05:00 pm

Tea Time 10:45 am to 11:00 am and 03:30 pm to 03:45 pm

Lunch Time 01:00 pm to 2:00 pm

Duration Activity / Contents

Day 1

09:15 am Registration

09:30 am to 01:00 pm Review of Number Systems, Basics of PLC and PLC SCAN FX Series Hardware Review

Range of PLCs like FX3U /FX3G, Different types of blocks/expansion module

Discrete I/O, Sourcing & Sinking, Relay & Transistor Type

PLC Memory, PLC Devices and I/O Addressing PLC Programming : GX Works 2

Project Creation / Project Editor

Transfer setup / Upload / Download

Relay Based Instructions and Timers & Counters

Monitoring & Editing Practice

02:00 pm to 05:00 pm PLC Programming

Grouping of bit devices, indexing registers

Data transfer instructions & Arithmetic instructions

Logical / comparison instructions Practice

Day 2

09:30 am to 01:00 pm Analog Input / Output Blocks

Range of analog blocks

FX3U-4AD and FX3U-4DA modules

Specification, wiring and configuration, interfacing with BFMs Analog Input / Output Adapters

Range of Analog Adapters

FX3U-4AD-ADP and FX3U-4DA-ADP

Specifications, wiring and Configuration, Special D/M devices Practice

02:00 pm to 04:30 pm Advanced Programming

Program control instruction : CJ, For-Next and Call Interrupts

Input interrupts & Timer interrupts

High speed counter & counter interrupts Practice

04:30 pm to 5:00 pm Feedback / Interaction / Self evaluation

7

GOT Training


Duration Two Days





Day 1


09:30 am to 05:00 pm GOT Hardware overview GT Designer software

New project creation

Configuration of GOT communication with PLC

OS selection and installation: Boot OS, Standard monitor OS, Communication driver,

Different types of Screen

Various Objects like switch / lamps / Text and Numerical display, various graphs; and other objects

Part Display & Part routes

Comments / Comment groups / Comment display

User Alarms: Alarm configuration & Alarm Display

Objects from Library Practice

Day 2

09:30 am to 04:30 pm GT Designer software

Recipe,

Scripts: Project & Screen scripts

Logging function, Time Action,

System Alarms & Advanced Alarms

Document Display, Network Monitoring

Backup restoration: GOT & PLC programs

Intelligent Module monitoring

List Monitor & Editor

Ladder Monitoring & Editor

One-touch ladder jump function, PLC Diagnosis on GOT

Different communication options like CC-Link, Ethernet and Q-Bus connection

Practice


8

Q PLC & CC-Link Basic Training


Duration Three Days

Training Session Timing Training Time 09:30 am to 05:00 pm Tea Time 10:45 am to 11:00 am and 03:30 pm to 03:45 pm Lunch Time 01:00 pm to 02:00 pm

Duration Activity / Contents Day 1 09:15 am Registration 09:30 am to 01:00 pm Basics of PLC

Introduction of QnU/QnUDV series PLCs hardware Discrete I/O modules, sourcing and sinking connections PLC memory drives, device memory, special devices (SM/SD) Addressing of I/O

PLC Programming : GX Works2 Simple Project mode

Transfer setup: RS232/USB/Ethernet Project upload & download Relay based instructions Timers & Counters Monitoring & Editing

Practice

02:00 pm to 05:00 pm PLC Programming

Data transfer instructions Arithmetic instructions

Logical and comparison instructions In-line ST programming

Practice

Day 2 09:30 am to 01:00 pm Advanced Programming

Grouping of Bit devices and Indexing Program control instruction: Call and Subroutines, Jump, For-Next Loop

instructions

Multiple programs

File registers

Memory Card : file registers & program backup and booting Practice

9

Duration Activity / Contents Day 3 09:30 am to 01:00 pm CC-Link Basics

CC-Link module specification and features

Wiring of remote I/O module

Remote I/O stations & remote Device Stations

Hardware test of QJ61BT11N module

Troubleshooting and practical session Practice

02:00 am to 04:30 pm Introduction of Structure Programming (IEC-61131-3)

Different Editors : Structure Ladder, FBD, Ladder and ST

POU Types: Program, Function and Function Block

Standard and User Library Practice


10

Q Networking (Advanced Networking) Training


Duration Three Days

Training Session Timing Training Time 09:30 am to 05:00 pm Tea Time 10:45 am to 11:00 am and 03:30 pm to 03:45 pm Lunch Time 01:00 pm to 02:00 pm

Duration Activity / Contents Day 1 09:15 am Registration 09:30 am to 01:00 pm Q PLC Overview

Overview of Q Hardware and I/O addressing

GX-Works2 Programming Software overview CC-Link

Specifications Configuration for Remote I/O and Remote Device Stations

PLC to PLC communication using Local Stations

Practice 02:00 pm to 05:00 pm CC-Link IE Field network

Specifications Configuration for Remote I/O stations

Configuration for Local Station Practice

Day 2 09:30 am to 01:00 pm CC-Link IE Field network (cont.)

Configuration for head module (L series I/O) I/P packet transfer using CC-Link IE Field network

Practice

02:00 pm to 05:00 pm CC-Link IE Control Network

Specifications Configuration of Control stations and normal stations

Practice

Day 3 09:30 am to 01:00 pm 02:00 pm to 04:30 pm

MelsecNet/H

MelsecNet modules range, specification and features

Configuration and wiring Optical loop and coaxial connections

PLC to PLC communication Remote I/O network

Remote To/From instructions Hardware Test of MelsecNet/H modules

Practice


11

Positioning Training

Prerequisites Participants are expected to know the number systems (Binary, Hex, BCD), basics of

PLC, basics of induction Motor, etc. Participant must be well familiar with FX PLC and QPLC basics

Duration Three Days





Day 1


09:30 am to 01:00 pm Basics of Positioning Pulse Type Servo Amplifier : MR-E Super /MR-JE / MR-J3/J4-A

Specification and parameters

Power connection guideline

Signal connections with positioning controllers like FX3U / QD75P/D

Display, monitoring and test operation

Troubleshooting : Alarms & warnings MR-Configurator

Setup software for Testing / Setting / Parameter Backup Practice

02:00 pm to 05:00 pm Positioning using FX3U PLC

FX3U inbuilt High speed I/O and FX3U High Speed Adapters

Positioning Instructions & FX3U Table Instructions Practice

Day 2

09:30 am to 01:00 pm SSCNET based Servo System : MR-J3 /MR-J4B

Specification and Parameters

SSCNET connection with positioning controllers like QD75MH /QD77MS Product Range : QD75P/D/M/MH /QD77MS

Specifications

External Signal Connections : DOG, STOP/Change, FLS and RLS

I/Os : Positioning status and commands Practice

02:00 pm to 05:00 pm QD77 MS /QD75MH

Positioning parameters , Monitoring data & Control data

JOG operations

Homing operation : Different types of homing

Errors monitoring & error correction logic Practice

12


Day 3

09:30 am to 01:00 pm 02:00 pm to 04:30 pm

QD75MH /Q77MS

Point to point Control : Using buffer memory

Various positioning functions: INC/ABS, Interpolation, VF / VR etc.

M-Code

Current value change function

Speed override function

Teaching Instruction Expansion Function of QD77MS

Speed –Position-Torque control mode change over function Practice


13

VFD (Inverter) Training

Prerequisites Participants are expected to know the number systems (Binary, Hex, BCD), basics of PLC, basics of induction Motor, FX Series Basics and Q PLC Basics etc.

Duration Two Days





Day 1


09:30 am to 01:00 pm Mitsubishi Inverter : 700 Series

Basics of inverter

Mitsubishi range of inverters

Inverter Selection

Power and signal connections V/F Control

Operation

Parameters

Different types of load patterns

Different mode of operation: PU, Net, External etc.

Jog operation Practice

02:00 pm to 05:00 pm FR-Configurator

Parameters setting

Backup, Monitoring, trends Auxiliary Components Troubleshooting

Error & Warning Codes Practice

Day 2

09:30 am to 01:00 pm Networking of VFD

FX3U & VFD using RS485 /232 BD

VFD on CC-LINK using F7NC

Modbus Option Practice

02:00 pm to 04:30 pm Energy Saving Using VFD : F700 series Advanced Features of Mitsubishi VFD


14

Q Motion Training

Prerequisites Participants are expected to know the number systems (Binary, Hex, BCD), basics of Q PLC, Addressing of I/O, basics instructions, GX Developer, fundamentals of Positioning, basics of induction motors and encoder, drive principle, etc. Participants must have gone through positioning training..

Duration Three Days





Day 1


09:30 am to 01:00 pm 02:00 pm to 05:00 pm

Overview of Mitsubishi Range of Servo Controllers SSCNET Based Servo Systems

Basics of servo systems

Servo amplifier MR-J3B /MR-J4B /MR-J4WB

Connections : SSCNET, external signals and power Connections

Parameters Q17nD/DS Q170M/MS Motion CPUs

Range of motion CPUs: specifications and configurations

Motion Specific Modules : Q172DEX / Q173DPX / Q172DLX OS installation procedure Special relays & registers of motion CPUs MT Developer - 2

New project creation

Basic system setting

Multiple CPU data sharing setting

Fixed parameters and parameter blocks

Servo parameters Practice

Day 2

09:30 am to 01:00 pm 02:00 pm to 05:00 pm

SFC Programming

SFC Specifications

SFC programming Steps (F /FS/G etc)

Instructions for F/G Steps

Servo program (K) and various instruction Exercise

Homing using different homing methods like Near point Dog, Data set, etc

Single axis positioning in real mode

Interpolation : Linear, Circular

VF/VR instructions Practice

15


Day 3

09:00 am to 01:00 pm 02:00 pm to 04:30 pm

Motion Control: Virtual Mode

Special bits and registers for virtual axis

Servo Program allocation for Virtual Control

Real to virtual mode transition

Configuration of virtual axis

Simultaneously operation of virtual and real axis Mechanical Editor

Input Modules : Servo motors (virtual axis) / Synchronous encoders

Connecting Modules :Different types of gears, Clutches, Differential gears and speed gears

Output Modules : Rotary Table, Roller, Ball Screw & CAM CAM Editor

CAM Design : Feed CAM & Reciprocating CAM Practice


16

Simple Motion Training

Prerequisites Participants are expected to know the number systems (Binary, Hex, BCD), basics of

Q PLC, Addressing of I/O, basics instructions, GX Developer, fundamentals of Positioning, basics of induction motors and encoder, drive principle, etc. Participants must have gone through positioning training..

Duration Two Days





Day 1


09:30 am to 01:00 pm 02:00 pm to 05:00 pm

Overview :

Mitsubishi Range of Servo Controllers

SSCNET Based Servo Systems

Overview of QD77 Specifications overview QD77MS Configurations

Parameters

Servo parameters Settings

Positioning Parameters

Input Axis Parameters

Synchronous Parameters with single virtual axis and linear cam

Jog, Home and error correction program

Synchronous operation using Sequence program CAM Design

CAM types, Resolutions, Stroke units, and other parameters

Configuration of different types of CAM

Selection of CAM for Output axis Practice

Day 2

09:30 am to 01:00 pm 02:00 pm to 04:30 pm

Synchronous parameters in Details

Auxiliary Virtual Servo and encoder axis

Clutches, electronic gears, differential gears, speed change gears

Exercises using different components of synchronous motion CAM Auto generation Function

Control data for Auto generation of CAM

Execution of Auto CAM for rotary axis CAM Position Restoration function Practice Troubleshooting and Monitoring


17

L series PLC Basic & Built in Positioning Training

Training Session Timings

Training Timings 09:30 am to 05:30 pm



Duration Activities/Contents

Day 1


09:30 am to 01:00 pm Review of Number Systems, Basics of PLC and PLC SCAN L Series Hardware Review

Introduction of L series PLCs hardware

L series built in I/O functionality

Discrete I/O modules, sourcing and sinking connections

PLC memory drives, device memory, special devices (SM/SD)

Addressing of I/O

PLC Parameter Settings

01:00 pm to 05:00 pm PLC Programming : GX Works2

Simple Project mode

Transfer setup: RS232/USB/Ethernet

Project upload & download

Relay based instructions

Timers & Counters

Monitoring & Editing Practice

Day 2

09:30 am to 01:00 pm Analog Input / Outputs Module

Range of Analog Modules

Connections, buffer memory, configuration

BFM interface : To/From instructions, Un\Gm addressing

Intelligent Module Configuration –AD/DA Practice

02:00 pm to 5:00 pm Advanced Programming

Grouping of Bit Devices

Program Control Instruction: CALL and Subroutine, Jump, For-Next Loop instruction

Multiple Programs, Program types

Memory Card: File register, Program Backup and booting

L series Data Logging function Practice

Prerequisites Participants are expected to know the number systems (Binary, Hex, BCD), basics of PLC, Basics of Electrical & Electronics etc .

Duration Three Days

18

Duration Activity/Contents

Day 3

09:30 am to 01:00 pm Introduction to Built-in Positioning with Pulse Type Servo :MR-JE/MR-J4-A

Introduction to built-in positioning features.

Connections, Configuration & Parameter Setting

Basic Operations: Homing & Jogging Practice

02:00 pm to 4:30 pm Introduction to Pulse Positioning

Pulse Positioning profile creation

Positioning table creation , execution

Various Positioning Commands

Monitoring, Troubleshooting Practice


19

iQR PLC Training

Prerequisites Participants are expected to know the number systems (Binary, Hex, BCD), basics of PLC, basics of Networking, RS232 and RS485 protocols, Label Programming etc.

Duration Three Days

Training Session Timing

Training Time 09:30 am to 05:00 pm




Day 1


09:30 am to 01:00 pm Basics of MELSEC IQR Series hardware

Introduction of iQ-R PLC hardware, Features, Specifications

System Configuration, Various Modules in Line-up

MELSEC iQ-R Series Product outline

Difference between Q Series and iQ-R

Compatibility with existing product line up

I/O Addressing Practice

02:00 pm to 05:00 pm PLC Programming: GX Work3

Introduction of GX Works 3 software

Creating New Project

System Configuration

Intuitive Program (Drag & Drop)

Using built-in library

3rd Party Partner Library Practice

Day 2

09:30 am to 01:00 pm PLC Programming: GX Work3

Creating New data & setting of labels

Creating FB Program and Techniques for creating FBs

Utilizing FBs in other project

E Manual Viewer Practice

02:00 pm to 05:00 pm Analog Input / Outputs Module/Intelligent Function Module

Range of Analog Modules /Intelligent function module

Connections, buffer memory, configuration

Module Library

Use of Module labels for programming of A/D,D/A & Other Intelligent

Changing module slot and reflecting IO assignment Practice

20


Day 3

09:30 am to 01:00 pm Introduction to Embedded Data Base

Recipe and Production data management

Dedicated commands Like DB.INSERT, DB.SELECT

Program example Practice

02:00 pm to 04:30 pm Maintenance & Security function

Data Logging & Analysis

Memory Dump Function

Quickly find network errors

Prevent system downtime with relay monitoring

Security key protection

Access control by IP address/password

Event Log History Practice


21

Robot Training

Prerequisites Participants are expected to know the Coordinates, Basics of Electronics and Pneumatics.

Duration Three Days






Day 1


09:30 am to 01:00 pm Robot Safety related Laws

Industrial robot safety Basics of Robot

Introduction to MELFA Robot series and hardware

Types of Robot Controller and Manipulators

Robot Mastering

Robot Parameters

Device configuration, Control power

Wiring of user control (CNUSR)

Wiring of External Inputs and Outputs

Operation panel, T/B

Jog operation, Hand operation Moving the robot with jog operation

Joint, Cartesian, Tool jog operation

Opening/closing the hand, etc. Practice

02:00 pm to 05:00 pm Introduction to RT Toolbox2 Software

Robot Configuration using RT Toolbox

RT Toolbox Options Robot Programming language

MELFA-BASIC V specifications

Constants, variables, common variables, etc.

Program instructions

Command functions Practice

Day 2

09:30 am to 01:00 pm Robot Programming Using Teach Pendant

Basic operation of the T/B

Programming and teaching the positions

Revising, adding and deleting program instructions

Confirming the registered position data operation

Automatic operation Practice

22

Duration Activity / Contents Day 2

02:00 pm to 05:00 pm Robot Programming using RT Toolbox2 Software

Instruction Edit screen/Position Edit screen

Editing, teaching, compensating, etc.

Programming and teaching the positions

Revising, adding and deleting program instructions

Confirming the registered position data operation

Automatic operation

Debugging Robot Application Programming

Robot Pick and Place

Robot Pallet Operation Practice

Day 3

09:30 am to 01:00 pm Robot Application Programming

Robot Linear and Continuous path programming

Robot Machine tending Practice

02:00 pm to 04:30 pm Robot Communication Options Robot Maintenance and Alarms


23

MC Works64 SCADA Training

Prerequisites Participants are expected to know the basics of PLC, Configuration, Tags and OPC Server.

Duration Three Days






Day 1


09:30 am to 10:45 am

11:00 am to 01:00 pm

Introduction to MC Works64

Introduction to MC Works64

Architecture of MC Works64

Modes: Configuration vs Runtime

Programmable logic devices and OPC Servers

OPC Tags

Data Displays

Data Connections & Browsers

Microsoft Silverlight and Windows features Workbench

Introduction to the workbench

Customizing the workbench

Creating a project

Configuration and layout Management

Project management Tools

Workbench Runtime Practice

02:00 am to 05:00 pm GraphWorX64 Basics

GraphWorx64 Layout

The object Explorer

The property Explorer

Customizing Workspace using the View Tab Ribbon

Templates and Transitions

Symbol Library

Basics 2D shapes and objects

Dynamics & Object count

Application Mode

Display password protection Practice

24


Day 2

09:30 am to 01:00 pm Alarm WorX64 Server & Viewer

Alarm Tags

Configuring Alarm Tags

Group Alarm Tags by Area Importing & Exporting Components

Configuring the Viewer

Adding Tabs, Alarm subscription to Tabs

Tab properties

Text Translation

Alarm Viewer Runtime Options Practice

02:00 pm to 04:30 pm GraphWorX64 Tools

MC Works64 Controls

Search and Replace

Arranging Controls and Objects

Views

GraphWorx64 Runtime Ribbon and Menus Practice


25

5. Detailed Agenda of Regular Training Courses: MEI FA Products

Nexgenie 1000 PLC Training


Duration Two Days






Day 1


09:30 am to 10:45 am

Review of Number Systems, Basics of PLC and PLC SCAN MEI PLC Product Range Overview Nexgenie 1000 PLC Hardware Review : Nexgenie 1000 PLC : Base Blocks

NG16DL / NG16ADL / NG14RL / NG14 RN / NG16DN Introduction Of Base blocks – serial ports, I/O wiring connector

Different types of digital expansion module NE16DX / NE14RX / NE08X / NE06RX / NE08DX

Discrete I/O, Sourcing & Sinking, Relay & Transistor Type Sinking & sourcing wiring Explanation Relay & Transistor Type wiring Explanation

PLC Memory, PLC Devices Different Types Of Memory & its size Marker Memory, Data Memory, File Marker Memory Application memory

For Execution Application Program Code Memory for Permanent Storage Application Program source code memory for Permanent storage

Addressing : I/O ( Symbolic & Absolute Addressing ) & Marker Memory I / Q / M Memory addressing Memory Mapping : Explanation of Memory Mapping Byte , Word & Double Word Symbolic Addressing

Practice

11:00 am to 01:00 pm

PLC Programming : CoDeSys Brief Explanation about Programming Software – CoDeSys o System Requirement & Installation

POU & Main PRG Explanation Programming Languages – LD , IL , ST , FBD Possibility of Conversion Configuration Of PLC

26


11:00 am to 01:00 pm

PLC Programming : CoDeSys Cont… Project Creation / Project Editor Transfer setup / Upload / Download Relay Based Instructions and Timers & Counters Monitoring & Editing - Simulation Mode Visualization

Practice

02:00 pm to 05:00 pm PLC Programming Data transfer instructions Arithmetic instructions Logical / Comparison instructions

Practice

Day 2

09:30 am to 01:00 pm Analog Input / Output Expansion Modules Range of Analog blocks NE40UX , NE42UX , NE02AX & NG16ADL Specifications & Wiring Program Configurator Programming

Practice

02:00 pm to 04:30 pm Interrupts Input , Timer interrupts

Troubleshooting Offline – LED diagnostics & Online - System Variables

Practice


27

Nexgenie 2000 Plus PLC Training


Duration Three Days






Day 1


09:30 am to 10:45 am

Review of Number Systems, Basics of PLC and PLC SCAN MEI PLC Product Range Overview Nexgenie 2000 Plus PLC Hardware Review

Range of CPUS, Base racks Range of different types of module Discrete I/O, Sourcing & Sinking, Relay & Transistor Type Sinking & sourcing wiring Explanation Relay & Transistor Type wiring Explanation

PLC Memory, PLC Devices

Different Types Of Memory & its size Marker Memory

Data Memory File Marker Memory Application memory

For Execution Application Program Code Memory for Permanent Storage

Application Program source code memory for

Permanent storage Addressing : I/O ( Symbolic & Absolute Addressing ) & Marker Memory

I / Q / M Memory addressing Memory Mapping : Explanation of Memory Mapping Byte , Word & Double Word Symbolic Addressing

Practice

11:00 am to 01:00 pm

PLC Programming : CoDeSys Brief Explanation about Programming Software – CoDeSys o System Requirement & Installation

POU & Main PRG Explanation Programming Languages – LD , IL , ST , FBD Possibility of Conversion Configuration Of PLC Project Creation / Project Editor Transfer setup / Upload / Download Relay Based Instructions and Timers & Counters Monitoring & Editing - Simulation Mode Visualization

Practice

28


02:00 pm to 05:00 pm

PLC Programming Data transfer instructions Arithmetic instructions Logical / Comparison instructions

Practice

Day 2

09:30 am to 11:00 am PLC Programming (Contd.) Export & Import Feature

Export/Import of POU, FB and Global Variables

Visualization, Watch & Recipe Manager, Configuration. Save / Print POUs

Practice

11:00 am to 05:00 pm Analog Input / Output Modules

Range of analog modules,

Specification, wiring and configuration Program Configurator

Programming using IM Read & IM Write Function Blocks Practice

Day 3

09:30 am to 01:00 pm Modbus Function Module Master Configuration Remote I/O Module (Rix) Connection & Configuration Application Examples: Mitsubishi Inverter / Energy Meters, etc.

Modbus Slave Function

Programming : Communication FBs Practice

02:00 pm to 04:30 pm Interrupts Input interrupts

Timer interrupts Troubleshooting Practice


29

GOC Training


Duration Two Days






Day 1


09:30 am to 05:00 pm Review of Number Systems, Basics of PLC and PLC SCAN MEI PLC Product Range Overview Graphic Operation Controller (GOC) Hardware Review

Nomenclature and salient features

Main Unit, Extension Unit – I/O Extension & COM Extension Discrete I/O Wiring GOC Memory & Devices

- Different types of memory & their sizes, Marker memory, Data

memory, Application Memory & Source code

11:00 am to 01:00 pm PLC Programming : CoDeSys Brief Explanation about Programming Software

POU & Main PRG Explanation

Programming Languages – LD , IL , ST , FBD Practice

02:00 pm to 05:00 pm PLC Programming Data transfer instructions

Arithmetic instructions

Logical / Comparison instructions Practice

Day 2

09:30 am to 01:00 pm Analog Input / Output Expansion Modules Range of Analog expansion module

Specifications, Wiring & Configuration

Programing Practice

02:00 pm to 04:30 pm HMI Function Highlighting features

Screen

Data Entry

Function Keys System Variables Practice Troubleshooting

04:30 pm to 05:00 pm Interaction / Feedback / Evaluation

30

6. Customized Training Programmes We also conduct training on following products as per customer’s requirements at our FA centres or customer’s site:

MELCO FA Products Training List

Training Module Brief Agenda

FX Networking Serial Communication Boards/ Adapters, 1:N & N:N communications, Inverter Network with FX3U / FX3G PLCs, CC-Link for FX PLC : Master & Salve Blocks, Ethernet Module : FX3U-ENET

FX Third Party communications

Modbus communication using FX3U-232 /485 ADP-MB

FX Positioning Blocks FX2N-1PG /FX2N-10PG FX3U-20SSCH: SSCNET-III based module for MR-J3-B servo amplifier

Q Third Party Communications

Modbus: Serial & TCP/IP, DeviceNet / Profibus / Others

Redundant CPU Q12PRH / Q25PRH Redundancy CPUs, Programming & Parameter Setting for redundancy

IQ Platform Integrated Programming Platform for PLC, HMI and Motion. This includes MELSOFT Navigator, GX Works-2, MT Works-2, GT Works-3

Q170MSCPU 16 Axis Motion & Sequence CPU combined controller, MT-Developer-2, SSCNET-III based servo amplifier

MR-MQ100 Standalone 1½ Axis Motion Controller, MT-Developer-2, SSCNET-III based servo amplifier

MR-J3-T CC-link based Servo Amplifier of MR-J3 Series

L series PLC training L Series PLC hardware, Range of CPUs, I/O modules, Analog Modules, Networking modules, etc, I/O addressing, Programming using GxWorks2,

L Basic Positioning L series Built-in Positioning, High speed inputs/outputs, Encoder Interfacing, Interfacing with pulse input type servo amplifiers, Homing, Jogging, and positioning, practice

L Advance Positioning LD75MH and LD77MS modules, SSCNET based Servo controllers, Simple Motion control, etc.

VFD A800 Training Series Comparison of A700 & A800, A800 functions, A800 Inverter Controls – V/F, Advanced magnetic flux controls, Configuration of VFD ,FR Configurator2, Networking of VFD, Troubleshooting of VFD

MEI FA Products Training List

NG5K Training Nexgenie 5000 PLC, hardware overview, PLC memory, Different types of I/O modules, Programming using CoDeSys, Analog I/O module interface, CAN Open communication interface, practice, etc.

Advanced Training PTO/HSC using NG2KP and NG5K PLC, Interfacing with Servo Amplifiers, Motion Function Library, etc.

Networking Training CAN OPEN, MODBUS and Ethernet Communication feature in NG2KP / NG5K series PLCs, third party connectivity, GPRS,

SL HMI Training Different Types of Text HMI: JR HMI, JR Ex HMI, SR Ex HMI, Sr HMI., SL Designer Programming software, message configuration, key configuration, etc.

MS-HMI MS Series HMI- Hardware overview, MS Designer, Projects Creations, Screen Development, Various Objects, Alarms, Library Menu, Recipe Function, Data logging Function, Macro, 3rd Party Connectivity, etc.

Please contact training department for detailed agenda and schedule for above training programs.

31

7. Training Charges and Instructions for Registration

1. Regular training programs are conducted as per the calendar.

2. Training Charges for Regular Training Courses at MEI FA centres:

No. Duration of training (Days)

Charges (INR)

1 One Day 5500/-

2 Two Days 8000/-

3 Three Days 10000/-

4 Four Days 11500/-

3. Service tax is extra as applicable.

4. These charges are applicable to all regular training courses on Mitsubishi FA products.

5. Training venue can be selected from the list of FA centres mentioned in brochure. The same

charges are applicable for all the FA centres.

6. Accommodation and transportation will be arranged by the participants.

7. Fees once paid will not be refunded. Registration can be transferred to other participants

from the same company with prior intimation to the Training Department.

8. For the registration, please send duly filled ‘Training Request Form’ as given on following

page to nearby training centre or below centre :

Factory Automation Engineering Centre (FAC)

Factory Automation & Industrial Division,

Mitsubishi Electric India Private Ltd.,

EL-3, J Block, MIDC, Bhosari, Pune-411 026

Email: [email protected]

9. Registration is to be done minimum Two Weeks in advance with full payment of the training

fees.

10. We also offer wide range of training modules for Mitsubishi Factory Automation Products.

11. Please contact us for customized training required at site as well as if training requirement is

other than regular training courses.

mailto:[email protected]

32

8. Training Request Form

To be filled by training requester / applicant

Applicant Details:

Details for requested course :

Participants from the same organization / department :

No.

I declare that the above information is correct and participants fulfil the prerequisites for the mentioned courses.

Place:

Date: (Signature of Applicant)

Further Communication / Action Required:

Quotation ( ) / PO Received ( ) / Date Confirmation ( )

Site Visit Required ( )

9

7

6

5

Name of Participant Designation Department

2

1

4

3

Training Agenda

Training Type Regular as per MEI Training Calendar ( ) / Customized ( )

Expected Schedule

Preferred Location

Total No. of Participants

Training Request Form

Mitsubishi Electric India Pvt. Ltd.

MEI Pune ( ) / MEI Gurgaon ( ) / MEI Bangalore ( ) / MEI Chennai ( ) / MEI Ahmedabad ( ) or

Customer Site ( ) (Specify the location if customer site is selected)

Department

Organization

Name of Applicant

Designation

Contact Details Mobile : Email :

8

10

Mitsubishi FA Product Used :

For Internal use only at Mitsubishi Electric India Pvt. Ltd.

Format No. MEI/FAC/TR/001

Payment Details :

Tel: (020) 27102000, Fax: (020) 27102100

Email : [email protected]

Request:-Kindly fill this form and send either hardcopy to below address or email scan copy.

Contact Address : FAC, FAID, Mitsubishi Electric India Pvt. Ltd, EL-3, J Block, MIDC Bhosari, Pune - 411 026

Planned Date: Allotted Engineer / Faculty for training:

training calendar: year 2015-16 · 7 got training prerequisites participants are expected to know...

Documents