Tpu Adhesive

Download Tpu Adhesive

Post on 27-Nov-2014

94 views

Category:

Documents

4 download

Embed Size (px)

TRANSCRIPT

<p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>Taiwan PU Corporation TPUCO TPU ADHESIVE</p> <p>Taiwan PU Corporation</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>Solvent-Based TPU* TPU Adhesives for Shoes * TPU Adhesives for Ink</p> <p>Hot-Melt TPU* TPU for Hot-Melt Grades * TPU Hot-Melt Adhesives for Toe Puffs &amp; Counters(Shoe Industry) * TPU Hot-Melt Adhesive Powder</p> <p>Moisture Reactive PUR* PUR Hot-Melt</p> <p>Water-based PU* WPU-371B * WPU-372C * WPU-372D</p> <p>Hardener Additive* TPUA-ACFN (Non Yellowish) * TPUA-AC528 * TPUA-C43F * TPUA-E33D</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>TPU Adhesives for ShoesFeatures:Good adhesion to a variety of substrates TPU, Nylon, PVC, Leather, Synthetic Leather, Polyester, Fabrics,etc.</p> <p>Application:Shoe Industry, Textile Industry and others.</p> <p>Processing Method:By Solvent. The formulation we generally suggested is one-third (1/3) each of MEK, Acetone and Toluene. In general, it depends on the customer's requirement. If you require the faster volatility, you can use more Actone. If you would like to reduce the cost by Toluene, the Max. Toluene in Solvent is 30% ~ 35%. If the Toluene is not allowed, you can use EAC instead. As to the actual formulation, it should be adopted according to the characteristics of solvent and every customer's needs.</p> <p>Article</p> <p>Type Yellowin Crystalliz Activat Tack Heat (POLYO g ation ion Time(min) resistance L) resistanc rate Temp PVC vs. kg/cm3 O e C PVC, PVC vs. 25 OC PVC, 70OC bonding strength very fast 55 ~ 65 very fast 55 ~ 65 very fast 55 ~ 65 5 ~ 10 25 ~ 50 25 ~ 50 6 ~ 10 6 ~ 10 6 ~ 10</p> <p>Initial Max. Viscosity strength Toluen (CPS/25 OC ) kg/cm3 e 15% solid PVC vs. % content in PVC in MEK After 5 Solven mins t 10 ~ 16 12 ~ 18 12 ~ 18 30 ~ 35 1600 ~ 2000 30 ~ 35 1600 ~ 2000 30 ~ 35 1600 ~ 2000</p> <p>TPUA-76 Polyester little 0 yellowing TPUA-15 Caprolac little 60 tone yellowing TPUA-15 Polyester little 60A yellowing + Caprolac tone TPUA-15 Polyester little 60B yellowing + Caprolac tone</p> <p>very fast 55 ~ 65</p> <p>25 ~ 50</p> <p>6 ~ 10</p> <p>12 ~ 18</p> <p>30 ~ 35 1600 ~ 2000</p> <p>TPUA-14 Caprolac little very slow 55 ~ 65 over 8 hrs 2A tone yellowing</p> <p>3~6</p> <p>9 ~ 15</p> <p>30 ~ 35 1600 ~ 2000</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM TPUA-17 Polyester non3BA yellowing TPUA-17 Polyester non3DA yellowing TPUA-13 Caprolac little 3A tone yellowing very fast 55 ~ 65 very fast 55 ~ 65 very fast 55 ~ 65 5 ~ 10 5 ~ 10 25~50 3~6 3~6 8 ~ 12 8 ~ 12 30 ~ 35 1600 ~ 2000 30 ~ 35 1600 ~ 2000 35 ~ 40 20% solid content in MEK 800~1200 25% solid content in MEK 1600~2000</p> <p>TPUA-16 2A</p> <p>Polyester</p> <p>little yellowing</p> <p>very fast 55 ~ 65</p> <p>5~10</p> <p>35 ~ 40</p> <p>Notice: These values are based on the test of our present laboratory test specimens.</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>TPU Adhesive for Ink</p> <p>Features: Good adhesion, abrasion resistance, softness, flexibility,etc. Soluble in MEK and Cyclohexanone. Application: Screen Printing, Spray, Transfer Coating and others. Processing Method: By Solvent. If the solution effect is not good by using solely MEK, you can add more than 10% of Anone or DMF to obtain the best solution effect.</p> <p>Tensile Specific 100% (cps/25 OC) Hardness Strength Elongation Article Gravity Modulus 30% Solid Content (Shore A) (kg/cm (%) (g/cm3 ) (kg/cm2 ) in Cyclohexanone 2 ) Anone/MEK (50/50) TPUA-3702A Caprolactone 1.20 72 200 35 800 3,000~4,000 CPS Type (POLYOL) TPUA-3771A Caprolactone TPUA-3771B Caprolactone TPUA-3852B Caprolactone TPUA-3852BH Caprolactone TPUA-3881A Polyester 1.20 1.20 1.18 1.18 1.20 77 77 85 85 88 200 250 250 300 250 35 35 75 75 900 800 650 650 700 4,000~6,000 CPS 16,000~24,000 CPS 10,000~15,000 CPS 20,000~25,000 CPS 10,000~15,000 CPS</p> <p>Notice: These values are based on the test of our present laboratory test specimens.</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>TPU for Hot-Melt Grades</p> <p>Features: Good bonding strength for TPU, Nylon, PVC, Leather, Polyester, Fabrics,etc. Application: Hot-Melt Adhesive Film, Seam Tape, Textile Lamination, Fabric Coatings, Heat Sealable Fabrics, Low Temperature Lamination Sheets, Heat Transfer Lamination, Automotive Industry, Woodworking and others Processing Method: By Extruder. We do not suggest to process the hot melt material by solvent. Anone or DMF can be used, if necessary.</p> <p>Article</p> <p>Type (POLYOL)</p> <p>Softening Flowing Working Tack Free M.I. Hardness Temp. Time Temperature (Shore A) (2.16kg, g/10 min) O C (OC) (min.) 30 8 15 10 2 30 35 20 6 15 30 10 4 6 6 6 5 6 2 3 67 77 72 70 75 75 75 80 90 95 96 96 98 97 97 97 97 97 70 98 20/150 OC 20/150 C 10/150 OC 40/150 OC 25/150 OC 20/150 OC 2~6/150 OC 4/150 OC 30/150 OC 10/150 OC 2/150 OC 4/150 OC 10/150 OC 10/150 OC 20~30/150 OC 10/150 OC 40/150 OC 10/150 OC 15/150 OC 15~25/150 OCO</p> <p>TPUA-250A Caprolactone 105~115 TPUA-250B Caprolactone TPUA-250C Caprolactone TPUA-251A Polyester TPUA-252A Polyester TPUA-256A Polyester TPUA-256AH Polyester TPUA-257B Polyester TPUA-259B Polyester TPUA-262A Polyester TPUA-262H Polyester TPUA-263D Caprolactone TPUA-264A Caprolactone TPUA-265A Polyester TPUA-265AL Polyester TPUA-266A Polyester TPUA-266B Polyester TPUA-267A Polyester TPUA-270B Polyether TPUA-285AL Polyester 120~130 115~125 115~125 125~135 110~130 130~150 130~140 130~140 100~110 125~140 125~140 80~90 80~90 130~140 90~100 100~120 110~130 130~140 130~140</p> <p>85 100 95 95 105 90 105 110 110 80 80 90 59 60 60 70 65 90 110 60</p> <p>Notice: These values are based on the test of our present laboratory test specimens.</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>TPU Hot-Melt Adhesives for Toe Puffs &amp; Counters(Shoe industry)</p> <p>Features: High Elasticity (Recovery), High hardness &amp; Stiffness, PVC-free,etc. Application: In the manufacture of heat activated toe puffs &amp; back counters (footwear). Processing Method: By Extruder.</p> <p>Article</p> <p>Type Hardness (POLYOL) (Shore A)</p> <p>Heat Lamination Extrusion Resistance Setting Time Appearance Temp. Temp. Temp. (min) ( OC) ( OC) O ( C)</p> <p>TPUA-462A</p> <p>Polyester</p> <p>95</p> <p>over 120</p> <p>100~140</p> <p>55~60</p> <p>30~40</p> <p>White Pellet</p> <p>TPUA-465A</p> <p>Polyester</p> <p>97</p> <p>over 80</p> <p>80~120</p> <p>55~60</p> <p>5</p> <p>White Pellet</p> <p>TPUA-465C Caprolactone TPUA-465CN 95 over 80 120~160 60 1~1.5</p> <p>White Pellet</p> <p>Blue Pellet</p> <p>TPUA-465F</p> <p>Polyester</p> <p>98</p> <p>over 80</p> <p>120~160</p> <p>55</p> <p>4~5</p> <p>White Pellet</p> <p>TPUA-465G</p> <p>Polyester</p> <p>95</p> <p>over 80</p> <p>120~160</p> <p>50~55</p> <p>3~4</p> <p>Gray Pellet</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>TPU Hot-Melt Adhesive Powder</p> <p>Features: Good bonding strength, washing resistance. Application: Textile Lamination and others. Processing Method: By scattering powder onto the area of the lamination.</p> <p>Article</p> <p>Tensile 100% Hardn Type Diamet Specific Softenin Strengt Modulu Elongati ess (POLYO er Gravity on Tg (OC) g Point Appearance h s (Shor L) (mm) (g/cm3) (kg/cm (kg/cm (%) R&amp;B(OC) e A/D) 2 2 ) ) 0.0~0.1 0.1~0.2 Polyester 1.2 0.2~0.4 0.4~0.6 0.0~0.0 8 0.08~0. 2 0.2~0.4 0.4~0.6 97/46 300 60 900 -38 120 White Powder</p> <p>TPUA-5200 B TPUA-520 1C TPUA-520 2E TPUA-520 4G TPUA-530 0I TPUA-530 8C TPUA-530 2E TPUA-530 4G</p> <p>Polyeste r</p> <p>1.2</p> <p>97/46</p> <p>300</p> <p>60</p> <p>950</p> <p>-38</p> <p>80</p> <p>White Powder</p> <p>Notice: These values are based on the test of our present laboratory test specimens.</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>PUR (RHM) Hot Melt Adhesive</p> <p>Features: Without any organic solvent, one of the co-protection adhesives. Lowest Harmful Influences For Human, Saving Prime Cost Of production, Lowest Injury To Environmental Pollution. High elasticity and non-breakable features under low temperature. Long wearing, maturing-resistant, heat-resistant, oil-resistant. PUR production processes and final productions do not produce any organic gas.</p> <p>Application:Snow coat, diving suit, sport clothes, lining of windbreak coat, adhesive for elastic belt, home decorations, curtains, mattress, fabric +fabric, fabric +TPU, fabric +PE, foam cotton +fabric, etc.</p> <p>Processing Method:PUR Vacuum Tub Hot-Melt Adhesive Coating &amp; Polyurethane Reactive Hot-Melt Adhesive Laminating.</p> <p>Article</p> <p>Appearance</p> <p>Main use Textile lamination</p> <p>Open time at Nonvolatile Viscosity at % 100OC 100OC over 30 seconds ~ 1 minute 100% 2500 500 CPS</p> <p>RPU-23G</p> <p>white Solid</p> <p>Notice: These values are based on the test of our present laboratory test specimens.</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>Waterborne polyurethane WPU-371B</p> <p>Article: WPU-371B Characteristics: Excellent hydrolysis resistance, extra soft grade and non-yellowing grade, softness feeling. Applications: Breathable-water proof fabric and use for foam layer of synthetic leather. Appearance: White liquid</p> <p>Specifications: 1.Solids content:451% 2.PH value: 7.0~7.5 3.Viscosity: 100~500cps 4.Particle charge :Anionic 5.100% Modulus: 10~20 kg/cm2 6.Tensile strength: 300~350 kg/cm2 7.Elongation at break: 800~900 % Attention in use:</p> <p>1. Product should be stored in a coolenvironment away from sunlight and excessive heat.</p> <p>2. Plastic-lined container are recommended.Carbon steel and copper should be avoided.</p> <p>3. Product has a storage life of at least 12months if collected stored. Packaging : PE Plastic drums -120 kg net</p> <p>Notice: These values are based on the test of our present laboratory test specimens.</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>Waterborne polyurethane WPU-372C</p> <p>Article: WPU-372C Characteristics: Excellent hydrolysis resistance, soft grade and non-yellowing grade, softness feeling. Applications: Breathable-water proof fabric and use for foam layer of synthetic leather. Appearance: White liquid</p> <p>Specifications: 1. Solids content: 501% 2. PH value: 7.0~7.5 3. Viscosity: 100~500cps 4. Particle charge: Anionic 5. 100% Modulus: 30~40 kg/cm2 6. Tensile strength: 450~550 kg/cm2 7. Elongation at break: 450~550 % Attention in use:</p> <p>1. Product should be stored in a coolenvironment away from sunlight and excessive heat.</p> <p>2. Plastic-lined container are recommended.Carbon steel and copper should be avoided.</p> <p>3. Product has a storage life of at least 12months if collected stored. Packaging : PE Plastic drums -120 kg net</p> <p>Notice: These values are based on the test of our present laboratory test specimens.</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>Waterborne polyurethane WPU-372D</p> <p>Article: WPU-372D Characteristics: Excellent hydrolysis resistance, medium hard grade and non-yellowing grade. Applications: Breathable-water proof fabric and use for foam layer of synthetic leather. Appearance: White liquid</p> <p>Specifications: 1.Solids content:501% 2.PH value: 7.0~7.5 3.Viscosity: 100~150cps 4.Particle charge : Anionic 5.100% Modulus: 80~90 kg/cm2 6.Tensile strength: 400~500 kg/cm2 7.Elongation at break: 400~450 % Attention in use:</p> <p>1. Product should be stored in a coolenvironment away from sunlight and excessive heat.</p> <p>2. Plastic-lined container arerecommended. Carbon steel and copper should be avoided.</p> <p>3. Product has a storage life of at least 12months if collected stored. Packaging : PE Plastic drums -120 kg net</p> <p>Notice: These values are based on the test of our present laboratory test specimens.</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM</p> <p>Hardener Additive TPUA - ACFN (NON YELLOWISH)DESCRIPITONThe almost colorless TPUA-ACFN (NON YELLOWISH) is designed as curing agent for adhesive based on hydroxyl polyurethane, natural and synthetic rubber; owing to TPUA-ACFN (NON YELLOWISH) features good photo-resistance, it is particularly suitable for light-color polyurethane adhesive system. Because the solvent is ethyl acetate, TPUA-ACFN (NON YELLOWISH) can be used in those countries where the use of methylene chloride is restricted.</p> <p>TYPICAL PROPERTIESChemical composition Intrinsic color ......................... Solution of approx .27 % Polyisocyanate in 73% ethyl acetate ......................... almost colorless to light-color clear liquid</p> <p>NCO content, %by......................... 6.80.2 weight Solubility .........................Soluble in various esters, ketones and aromatic solvents Storage stability .........................Reacts readily with moisture; for best performance it should be kept dry and stored at temperatures between(5oC~32oC)</p> <p>PERFORMANCEThe Film of adhesive and coasting film mixed by TPUA-ACFN (NON YELLOWISH), is difficult to become yellow after exposure to UV light and heat. So TPUA-ACFN (NON YELLOWISH) shows good bonding strength in PVC with much plasticizer, SBR with plenty of oil, coasting leather, silk and so on.</p> <p>APPLICATIONAfter the addition of TPUA-ACFN (NON YELLOWISH), the ready-to-use double-component adhesive should be applied within a period (pot life) which is determined not only its content of rubber, but also by the other ingredients of the formulation (e.g. resins, antioxidants, solvents, etc.) If the adhesive is not used within this</p> <p>ASIA: TaiwanPU.COM TEL: 886-2-22991666 FAX: 886-2-22991888 PU@TaiwanPU.COM North America: TaiwanPU.COM TEL: 408-839-2919 FAX: 408-351-8188 SALES@TaiwanPU.COM period, it may become increasingly difficult to apply and its viscosity increases rapidly until irreversible gelling ultimately occurs.</p> <p>SUGGESTED ADDITIONSFor Curing adhesive of 100 parts by weight (p.b.w) based on: Graft - Choloroprene rubber .........................3-5 p.b.w. TPUA-ACFN (NON YELLOWISH) (Rubber content approx. 16%) Choloroprene rubber (Rubber content .........................5-7 p.b.w. TPUA-ACFN (NON YELLOWISH)...</p>

Recommended

View more >