topic 11 – wave phenomena 11.1 – standing/ stationary waves
DESCRIPTION
STANDING VS PROGRESSIVE WAVES StandingProgressive AmplitudeAll points on the wave have different amplitudes. The maximum being 2A (at the antinodes) and 0 (at the nodes) All points on the wave, have the same amplitude FrequencyOscillate with the same frequency WavelengthTwice the distance for one node to the next node Shortest distance between two points that are in phase PhaseAll points between one node and the next node are in phase All points along a wavelength have different phases EnergyEnergy is not transmitted by the wave but it does have an energy associated with it. Energy is transmitted by the wave.TRANSCRIPT
![Page 1: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/1.jpg)
TOPIC 11 – WAVE PHENOMENA11.1 – STANDING/ STATIONARY WAVES
![Page 2: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/2.jpg)
STANDING WAVESFormation of standing wavesStanding waves are formed when two identical waves meet each other travel in opposite directions.
Wiki – Waves on a string
The result of this is a wave where the peaks simply move up and down but DO NOT PROGRESS.
![Page 3: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/3.jpg)
STANDING VS PROGRESSIVE WAVESStanding Progressive
Amplitude All points on the wave have different amplitudes. The maximum being 2A (at the antinodes) and 0 (at the nodes)
All points on the wave, have the same amplitude
Frequency Oscillate with the same frequency
Oscillate with the same frequency
Wavelength Twice the distance for one node to the next node
Shortest distance between two points that are in phase
Phase All points between one node and the next node are in phase
All points along a wavelength have different phases
Energy Energy is not transmitted by the wave but it does have an energy associated with it.
Energy is transmitted by the wave.
![Page 4: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/4.jpg)
FORMATION OF STANDING WAVES
![Page 5: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/5.jpg)
FORMATION OF WAVES IN CLOSED PIPES
![Page 6: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/6.jpg)
FORMATION OF WAVES IN OPEN PIPES
![Page 7: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/7.jpg)
11.2 DOPPLER EFFECTThe change in pitch of a sound wave due to a change in frequency of the wave is called the Doppler Effect.
It is caused by the relative motion of the SOURCE and the DETECTOR
![Page 8: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/8.jpg)
MOVING SOURCE
![Page 9: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/9.jpg)
MOVING OBSERVER
![Page 10: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/10.jpg)
DOPPLER EFFECT AND EM RADIATIONThe EM spectrum travels at c through a vacuum but if the velocity of the observed EM radiation in a lot smaller than c then we can use the following equation to calculate the change in frequency
For v << c
![Page 11: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/11.jpg)
DOPPLER EFFECT EQUATIONS
![Page 12: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/12.jpg)
USING THE DOPPLER EFFECT!11.2.6 – Outline an example in which the Doppler Effect is used to measure speed.
![Page 13: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/13.jpg)
11.3 DIFFRACTION A more in depth look at diffraction
Huygens’ Principlehttp://www.acoustics.salford.ac.uk/feschools/waves/diffract3.php
![Page 14: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/14.jpg)
DIFFRACTION FROM A SINGLE SLITWhat is the diffraction pattern shown on a screen when a wave is diffracted around a single slit?
![Page 15: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/15.jpg)
EXPLAINING THE DIFFRACTION PATTERN
![Page 16: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/16.jpg)
EXPLAINING THE DIFFRACTION PATTERN
![Page 17: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/17.jpg)
EXPLAINING THE DIFFRACTION PATTERN
![Page 18: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/18.jpg)
EXPLAINING THE DIFFRACTION PATTERN
![Page 19: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/19.jpg)
EXPLAINING THE DIFFRACTION PATTERN
![Page 20: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/20.jpg)
![Page 21: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/21.jpg)
![Page 22: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/22.jpg)
11.4 RESOLUTIONIf two sources sources of light are very close in angle to each other they can sometimes be seen as one light source.
If we can detect that there are two light sources then we say the light sources are resolved
The ability to do this depends on the RAYLEIGH CRITERION
![Page 23: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/23.jpg)
RAYLEIGH CRITERION
![Page 24: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/24.jpg)
RAYLEIGH CRITERIONIf the sources are to be just resolved, then the minimum of one diffraction pattern is located on top of the maximum of the other diffraction pattern.
For a SLIT – the minima was located atFor a CIRCULAR APERTURE -
![Page 25: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/25.jpg)
IMPORTANCE OF RESOLUTIONResearch the importance of resolution in the development of the following technologies
CDs
DVDs
Electron Microscope
Radio Telescopes
![Page 26: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/26.jpg)
INTENSITYDef’n– Power incident on a unit area(simply put – the greater the intensity the brighter the light will be)
Intensity = Power/ Area
Units = ??
IMPORTANT – There is a squared relationship between intensity and amplitude of the waveIntensity is proportional to the amplitude squared
![Page 27: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/27.jpg)
11.5 POLARISATIONIf a wave is restricted to travel in one plane only, we say it is polarised.
Here the wave is forced to travel in the vertical direction. It can pass through the first slit but cannot pass through the horizontal slit. We say it is polarised in the vertical plane.
Looking at this… Can all types waves be polarised?
![Page 28: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/28.jpg)
EFFECT OF POLARISERS ON INTENSITYPolarisation Sim on wiki
If unpolarised light passes through a set of polarising filters what is the effect on the intensity of the transmitted wave?
![Page 29: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/29.jpg)
MALUS LAW
Key Words – Polariser and Analyser
![Page 30: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/30.jpg)
MALUS’ LAW
![Page 31: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/31.jpg)
MALUS’ LAW
Remember the importance of the squared proportionality relationship between Intensity and Amplitude
![Page 32: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/32.jpg)
POLARISATION BY REFLECTION
When light is reflected from a surface, the reflected ray becomes polarised in the plane of the surface.
The amount of polarisation depends on the angle of incidence.
100% polarisation occurs when the angle of incidence is equal to the Brewster’s angle.
![Page 33: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/33.jpg)
BREWSTER’S ANGLE
![Page 34: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/34.jpg)
BREWSTER’S ANGLE
![Page 35: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/35.jpg)
OPTICALLY ACTIVE SUBSTANCESOptically active substances rotate the plane of polarisation of the light passing through them.
Examples include – sugar solutions, some plastics (when stressed)
With sugar solutions the concentration of the solution changes the amount of rotation. This can be used to determine the concentration on solutions
http://www.chemguide.co.uk/basicorg/isomerism/polarised.html
![Page 36: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/36.jpg)
OPTICALLY ACTIVE SUBSTANCES
![Page 37: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/37.jpg)
USES OF POLARISATION
• Polaroid Sunglasses
• LCD screens
• Stress Analysis
![Page 38: TOPIC 11 – WAVE PHENOMENA 11.1 – STANDING/ STATIONARY WAVES](https://reader036.vdocuments.mx/reader036/viewer/2022062401/5a4d1b447f8b9ab0599a2ce0/html5/thumbnails/38.jpg)
PROBLEMSQuestions 28-31 in your textbook!