Upload File

tm suspended profile - darkon · 2019. 12. 15. · if rec ceiling plate g(non dim) wire primary...

  • Home
  • Documents
  • TM SUSPENDED PROFILE - Darkon · 2019. 12. 15. · if rec ceiling plate g(non dim) Wire primary wires into terminal. if rec ceiling plate h(dim) Replicate step 7BA and connect dimming
5
F h TRIDONIC LLE LED MINIMUM AREA REQUIREMENT FIGURE 1. COMPONENTS A C D D A B DISTANCE DESCRIPTION A) 15MM SUSPENSION LOCATION POWERFEED LOCATION B) C) PROFILE LENGTH 2 45 3RD SUSPENSION LOCATION 4TH SUSPENSION LOCATION D) PROFILE LENGTH 3 TM tube SUSPENDED PROFILE A B C D WARNING INSTALLATION IS ONLY TO BE CARRIED OUT BY SUITABLY QUALIFIED PERSONS IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS AND ALL APPLICABLE REGULATIONS OR STANDARDS. (IMPROPER INSTALLATION CAN CREATE AN ELECTRICAL HAZARD WITH RISK OF ELECTRIC SHOCK, FIRE OR INJURY). DARKON WILL NOT BE HELD RESPONSIBLE FOR ANY CONSEQUENCES ARISING FROM IMPROPER PRODUCT HANDLING, STORAGE OR INSTALLATION. Ensure that products are mounted with supplied, recommended or appropriate screws and fixings to suit the mounting surface. TOOLS REQUIRED POWER DRILL / DRILL BIT / PHILLIPS DRIVER / PENCIL / PLIERS / TAPE MEASURE / PLUM LASER 1/5 05.09.19 www.darkon.com.au REVISION 02 E G* NOTE -Lengths that exceed 2200mm are fitted with 4 suspensions adding to components G, H, & I. supplied IF REC CEILING PLATE* CUT OUT 100 66 Ø69 78 72 MAINTENENCE Wipe product with a clean dry microfiber cloth. Do not use any cleaning products/ chemicals to clean product. SERVICING This is a non servicable fitting. Remote powersupply can be replaced if deemeed faulty. IF 2,200MM> IF BETWEEN 1M-2.2M

Upload: others

Post on 03-Feb-2021

1 views

Category:

Documents


0 download

Report

TRANSCRIPT

  • F h

    OPAL VTRIDONIC LLE LED MINIMUM AREA REQUIREMENT

    FIGURE 1.

    COMPONENTS

    A C

    D D

    AB

    DISTANCE DESCRIPTION

    A) 15MM SUSPENSIONLOCATION

    POWERFEED LOCATION

    B)

    C)

    PROFILE LENGTH 2

    45

    3RD SUSPENSION LOCATION

    4TH SUSPENSION LOCATIOND)

    PROFILE LENGTH 3

    TM

    tubeSUSPENDED PROFILE

    A B C D

    WARNINGINSTALLATION IS ONLY TO BE CARRIED OUT BY SUITABLY QUALIFIED PERSONS IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS AND ALL APPLICABLE REGULATIONS OR STANDARDS. (IMPROPER INSTALLATION CAN CREATE AN ELECTRICAL HAZARD WITH RISK OF ELECTRIC SHOCK, FIRE OR INJURY). DARKON WILL NOT BE HELD RESPONSIBLE FOR ANY CONSEQUENCES ARISING FROM IMPROPER PRODUCT HANDLING, STORAGE OR INSTALLATION.

    Ensure that products are mounted with supplied, recommended or appropriate screws and fixings to suit the mounting surface.

    TOOLS REQUIREDPOWER DRILL / DRILL BIT / PHILLIPS DRIVER / PENCIL / PLIERS / TAPE MEASURE / PLUM LASER

    1/505.09.19

    www.darkon.com.au REVISION 02

    E G*

    NOTE-Lengths that exceed 2200mm are fitted with 4 suspensions adding to components G, H, & I.

    supplied IF REC CEILING PLATE*

    CUT OUT

    100

    66

    Ø69

    78

    72

    MAINTENENCE Wipe product with a clean dry microfiber cloth. Do not use any cleaning products/ chemicals to clean product.

    SERVICINGThis is a non servicable fitting. Remote powersupply can be replaced if deemeed faulty.

    IF 2,200MM>

    IF BETWEEN 1M-2.2M

  • 2/505.09.19

    www.darkon.com.au REVISION 02

    G

    I

    H

    1.Project line using laser plumb and mark necessary mounting points using supplied Darkon drawing as reference.

    2a if sm ceiling plateDrill hole for powerfeed, drill pilot holes if necessary.

    3a if sm ceiling platePull powercable(240V) through ceiling

    3b. if rec ceiling platePulll powercable(240V) through cutout.

    2b. if rec ceiling plateMake cutout using appropriate wallboard saw.

    5. if multiple suspensionsFix remainding posilock(G) onto the ceiling with appropriate fasteners (not supplied).

    6. Measure desired length of theSuspension wire(I). Lightly bend and crimp to mark desired length.

    7.Thread the Suspension wire(I) throughwire gripper(H).

    4. Fix the posilock(G) onto the ceiling with appropriate fasteners (not supplied).

  • 3/505.09.19

    www.darkon.com.au REVISION 02

    G

    I

    HE

    ENTER

    D

    FEED THROUGH

    CURL BACK

    D

    BLU

    BRN

    8.Insert excess wire(I) through slot & connect gripper(H) & posilock(G).

    9.Press sprung tip and adjust suspension wire if required.

    11. if sm ceiling plate aThread supplied powercable (240V) through cable anchor. Curl back into cutout.

    if sm ceiling plate bInsert pulled powercable(240V) through opposite cutout (see inset)

    if sm ceiling plate cFix ceiling plate(D) with appropriatefasteners (not supplied)

    10.Pull supplied powercable(240V) through ceiling plate cover(E)

    if sm ceiling plate e (dim)Replicate step 7BA and connect dimming wires into wago terminal block, close.

    if sm ceiling plate d (non dim)Wire primary wires into terminal.

    if sm ceiling plate fFix 3mm grub screw into cable anchor with flathead driver.

  • 4/505.09.19

    www.darkon.com.au REVISION 02

    ENTER

    E

    240V

    BLU

    BRN

    FEED THROUGH

    CURL BACK

    240V

    240V

    240V

    11. if rec ceiling plate aAlign holes and install 2 of 4 bolts into one side of bracket(E).

    if rec ceiling plate bThread supplied powercable (240V) through cable anchor & Bracket(G). Curl back into cutout.

    if rec ceiling plate dInsert the fixed ceiling plate(D) & bracket(F) into the cut. Ensure lip of ceiling plate sits proud of surface.

    if rec ceiling plate eStep the fixed ceiling plate(D) & bracket(F) into the cutout.

    if rec ceiling plate fFix the remainding side of theCeiling plate(D) into bracket(F) with theremainding 2 bolts

    if rec ceiling plate g(non dim)Wire primary wires into terminal.

    if rec ceiling plate h(dim)Replicate step 7BA and connect dimming wires into wago terminal block, close.

    if rec ceiling plate iFix 3mm grub screw into cable anchor with flathead driver.

    if rec ceiling plate cInsert pulled powercable(240V) through opposite cutout (see inset)

  • D

    E

    B B

    12.Attatch cover(E) onto the Ceiling plate(D).Insert suspension wire into posilock.

    13. Using pliers, trim off excess suspensionwire(I).

    15. Ensure all suspension saddles() are fixed by using 3mm Allenkey.

    16. if installing cornersAlign mounting plate w/ mainbody screw flute detail.

    17.With suppied fastener, fix plate onto mainbody with screw driver.

    18.Slide plate and conceal into corner. Ensure Tube lens sits inside lip

    19.Use Laser to ensure fitting is straight and no light bleeds through join.

    20.Press sprung tip and adjust suspension wire if required. Use laser to confirm bodies are square and levelled correctly.

    14.Ensure suspensions are positioned in appropriate location (see figure 1)

    5/505.09.19

    www.darkon.com.au REVISION 02


ЭКРАН ВОЗМОЖНОСТИ ПОДКЛЮЧЕНИЯ · 2020. 10. 6. · 23.0in dim i ap7-u65 dimb dim c dim a 1000mm 39.4in dim d dim e dim f dim l 25mm1.0 dim g 658mm 25.9in

Web viewOn ERROR Resume Next. Dim objWMIService, oWMIService, oServices. Dim ADSiteName. Dim oUIResManager. Dim oCache, CacheSize. Dim SiteName,SiteCode,GUID,Version

Für Elise Bagatelle in A minor BEETHOVEN (1770-1827) Op.173 Poco moto Violin Piano 22 dim. 29 dim. mp mp dim. dim. cresc cresc 100 cresc 105 110 116 dim. dim. 121 poco rit. poco

Dim Dim Presentation

General Rec Rec Rec Rec Rec Rec - Iowa Legislature · The University of Iowa June 30, 2016 General Rec Rec Rec Rec Rec Rec Grant/Contract Nbr Sponsor Name Dept Begin Dt End Dt Ind

Rachmaninoff Variations on a Theme of Corelli 1/13web.media.mit.edu/~mike/scores/rachmaninoff/corelli/index2.pdf · dim. cresc. Listesso tempo dim. cresc. dim. dim. dim. Var.ll P

Tutorial Dim Dim En Rol De Participante Auditorio

PLS 2014: To dim or not to dim?

INTERAKTYVUMAS KOMPIUTERIO PARAMETRAI GARSAS … · DIM G 25.9in DIM I DIM K AP7-U65 DIMB DIM C DIM A 1000mm 39.4in DIM D DIM F DIM L DIM E 25mm1.0 DIM H 583mm 23.0in DIM J 1000 658mm

Serenade Schubert Andante dim. - Cahier du pianiste€¦ · Serenade Schubert Andante dim. dim. rit

DISPLAY - cdn.prometheanworld.com€¦ · dim a . dim b dim c 1000mm 39.4in dim d 25mm1.0 dim l dim f dim e dim g 658mm 25.9in dim h 1000mm39.4in dim i 583 dim j . dim k . ap7-b70

T3 dim 4.0 (flex dim) technical discussion

INTERACTIVIDAD INFORMÁTICA AUDIO · dim a dim b dim c 1000mm 39.4in dim d 25mm1.0 dim l dim f dim e dim g 658mm 25.9in dim h 1000mm39.4in dim i 583 dim j dim k ap7-b70 dim a dim

Fall Ceiling Designs Ceiling Types Ceiling Material Dropped Ceiling

US IR WLS DIM, US WLS DIM, DT WLS DIM IR VS DIM, US VS DIM ... · (1-2) ger rigT Mode (only DT WLS DIM & DT VS DIM) (3-4) Time Delay (5) Visible Alert (6) Service Mode (7) Mode Auto

Ceiling Mount 4000 Ceiling Mount 8000 Ceiling Mount Twin

CHAMBER ORCHESTRA OF THE SPRINGS...EBAss 89 dim , dim. sempre dim. sempre dim. - izza pizzç izrz„ arco izz. divisi PP ten cresc. div. poco cresce poco cresc- ten dim. dim dolce

Dim Arrow Size Offset from dim line Frame around text Precision = Dim line 200 o Suffi Liner Dim Arrow Heads 5 Extension Line Radius Dim Center mark Dim Extend beyond dim lines 4 Offset

Department of Mathematics | Penn Mathghrist/EAT/EATchapter1.pdfdim ker dim coker dim dim ! dim dim dim dim " # # # $ # # ! # $ % & O % ' $

Sales Dim Date Dim Customers Dim Products Dim Categories Dim Geography The data warehouse is a simple and standard one, after all we

02809229.89 =90.45 271.26 1=60.28 SCALE: 46 27 21 29 42 04 53. v.. REC. REC. REC. 'REC. REC. REC. REC. REC. REC. REC. FOOTHILL UMT No. 1 08—06—73 W BK. 44— PARCEL MAP NO. 4831-A

Dim Dim List

SKJERM TILKOBLING - Scandec · 2019. 6. 13. · DIM A DIM B DIM C 1000mm 39.4in DIM D 25mm1.0 DIM L DIM F DIM E DIM G 658mm 25.9in DIM H 1000mm39.4in DIM I 583 DIM J DIM K AP7-B70

Altervista...MENDELSSOHN Transcripta para dos guitarras M. LLOBET cresc.. cresc. dim. cre scen semi pre cresce cresc. do dim. dim. cresc. cresc. cresc. — dim. dim. g Author Vincenzo

Qué se puede hacer con dim dim

The QUEENSBURY · additional steps may be required up up up rec pantry pantry up coffered ceiling french doors waffle ceiling french doors pantry pivoting door open to above bedroom

CEILING #3 CEILING #2

tmm/talks/bord04.2/bord2.6up.pdf · [ VisDB Windows group dimensions separate dimensions relevance factor dim. 3 dim. 1 dim. 4 dim. 2 dim. 5 dimensi ... wvvw.research.att.com/—rab/trellis/sunspot.html]

DISPLAY ANSCHLÜSSE · 2020. 10. 20. · ap7-b70 dim a dim b dim c 1000mm 39.4in dim d 25mm1.0 dim l dim f dim e dim g 658mm 25.9in dim h 1000mm39.4in dim i 583 dim j dim k ap7-b70

Promethean - INTERACTIVITÉ INFORMATIQUE...DIM A DIM B DIM C 1000mm 39.4in DIM D 25mm1.0 DIM L DIM F DIM E DIM G 658mm 25.9in DIM H 1000mm39.4in DIM I 583 DIM J DIM K AP7-B70 DIM A

Aplicacion dim dim junio

INTERAKTIVITÄT COMPUTER AUDIO STROMVERSORGUNG · 2020. 10. 6. · ap7-u65 dimb dim c dim a 1000mm 39.4in dim d dim e dim f dim l 25mm1.0 dim g 658mm 25.9in dim h 1000 dim j dim k

General Rec Rec Rec Rec Rec Rec - Iowa Legislature · The University of Iowa March 31, 2015 General Rec Rec Rec Rec Rec Rec Grant/Contract Nbr Sponsor Name Dept Begin Dt End Dt Ind

MIXER MODEL DIM. A DIM. B DIM. C DIM. D DIM. E DIM. F DIM ... · 5/19/2016  · • if specific requirements are needed for your mixer mounting structure, please reference this drawing

(DIM) - UNDP · 2020-01-04 · (DIM) - UNDP ... undp