TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 1 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007 The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

REVISION HISTORY

Rev Author Description of Change Issue Date A John Ren

Release per ECO-4027 01/12/2007

DOCUMENT APPROVALS

Job Title Job Title

Job Title Job Title

Job Title Job Title Notice: This is a controlled document under master and revision control. You may print and use copies of this procedure as required. You are responsible for using the latest revision.

PURPOSE

SCOPE / APPLICABILITY

FX machine data server setup procedure for the Fanuc OI-MC Controller

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 2 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007 The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

RESPONSIBILITY The Electronics and production Department Supervisor is responsible for document

implementation and usage

MATERIALS AND EQUIPMENT

Compact flash memory card, Laptop PC with an available PCMCIA port, Fluke Model 27 Analog/Digital Multi-meter, Tools. All hard wares and soft wares for Fanuc data server options.

REFERENCE DOCUMENTATION

MFG-0003, MFG-0011, MFG-0019, MFG-0022 and MFG-0003 to MFG-0036. MFG-0127, MFG-0128, MFG-0129, MFG-0130, MFG-0131, MFG-0132, MFG-0132.

SAFETY AND ENVIRONMENTAL Please follow all necessary guidelines for safety. Only trained personnel should be performing

this procedure

DEFINITIONS

Soft key- Keys located below the Fanuc video display, their function changes by screen

POLICY

PROCEDURE

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 3 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007 The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

M.O# _______________ VMC SN ______________________________ MODEL _____________TEST DATE________________

Note: This form is designed to work as a check-off procedure creating a record of the test.

FX machine data server installation and testing procedure Section I. Backup all the software and data. 1. Reference all the axes. 1.1 Press “REF RETURN” push button on the operator panel . 1.2 Press “Z+” push button on the operator panel (Manual Z axis zero return). 1.3 Press “X+” push button on the operator panel (Manual X axis zero return). 1.4 Press “Y+” push button on the operator panel (Manual Y axis zero return). 1.5 CNC moved X/Y/Z axis to zero position. CNC screen will display X0Y0Z0. 2. Backup CNC parameters of the control. 2.1 Prepare a blank flash card to use. 2.2 Smoothly put the COMPACT FLASH CARD inside the M-CARD slot of LCD. 2.3 Press “SYSTEM” key on pendant. 2.4 Press “EDIT” key on pendant. 2.5 Press Soft key “+” twice. 2.6 Press Soft key “ALL IO”. 2.7 Press Soft key “PARAM”. 2.8 Press Soft key “OPRT”. 2.9 Press Soft key “PUNCH”. 2.10 Press Soft key “EXEC”. (OUTPUT will be display on the screen, all the parameter will output to the Flash Card as “CNCPARAM.DAT” ) 3. Backup SRAM file.

3.1 Power off the machine. 3.2 Press the most right side two soft key on the LCD screen and hold 3.3 Press the CNC power on push button. 3.4 Wait until the CNC system boot screen comes out. 3.5 Press the “DOWN” soft key to move the cursor to the item 5(is highlighted) 5. System Data Backup 3.6 Press “SELECT” soft key will display two choices

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 4 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007 The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

“1. SRAM BACKUP(CNC Flash Card)” “2…………………………………………..”

3.7 Make sure the cursor is in the first line.

3.8 Press “SELECT” soft key and you will be asked “Backup SRAM Data OK?” 3.9 Select “YES” to continue. (or “NO” to return to previous menu.) 3.10 Wait until the screen displays completed information. 3.11 Press “SELECT” soft key 3.12 Press the “DOWN” soft key until the cursor moves to item : END 3.13 Press “SELECT” 3.14 Press the “DOWN” soft key until the cursor moves to item : END 3.15 Press “SELECT”

3.16 Press “YES” 3.17 Finish, the CNC system will boot up.

Section II. Change the hardware. 1. Open the Fanuc Data Server package for Fadal FX machine. The package will include the following parts: Data Server Card: A20B-8101-0450 Flash Card (1GB): A02B-0213-K212

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 5 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

2. Assembly the flash card with Data Server Card. 2.1 Move the locker bar up from the flash card slot.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 6 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

Flash Card Locker 2.2 Put the flash card into the slot smoothly and make sure it plugs in and it is stable.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 7 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 8 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

2.3 Move the flash card locker bar down to secure the flash card.

Lock the flash card and make sure it is secure. 3. Install the Data Server Card to LCD unit of CNC.

3.1 Open the back cover of pedant of FX machine.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 9 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

3.2 Disconnect all cables/wiring from the LCD unit.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 10 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

3.3 Take off the LCD screen from Pedant.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 11 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

3.4 Take off the spare slot 1 cover from LCD unit.

Spare Slot 1

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 12 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

3.5 Install the DATA Server card into the spare slot 1 and make sure it is locked.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 13 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

3.6 Re-Install the LCD unit to pedant.

3.7 Connect all cable and wiring to the original place.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 14 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

3.8 Install the Ethernet Outlet unit and connect it to Data Server Board if we have this unit. (we don’t have this unit now.)

3.9 Hardware installation has done.

III. Install the system software.

1. Load the system software of Fanuc Data server option.

1.) Clean the flash drive in the PC. 2.) Copy the Data Sever system file “656WE.ENC” from the master file of PC. 3.) Put flash card into the slot of CNC. 4.) Depress the most right two soft-keys, and press Power ON button to power on the CNC and wait until it enter

into the system service screen. 5.) Select option “1. SYSTEM DATA LOADING” using up/down soft-key. 6.) Press the “SELECT” soft key to select the file “656WE.ENC”. 7.) Press “YES” soft key to load this file. 8.) Press “SELECT” soft key again when the current file loading is finished. 9.) Press “DOWN” soft-key to move the cursor to “END” 10.) Press ”SELECT” soft-key to return to previous menu. 11.) Press “DOWN” soft-key to move the cursor to “END” 12.) Press “SELECT” soft key. 13.) Press “YES” to boot the system. 14) Finished.

VI. Load the software option according to Fanuc Software Installation procedure MFG-113.

1. Find out the P/O number for this Fanuc option. 2. Find out the Fanuc Control series number and one can find out this number from the back of LCD

unit. The number is like: E0xxxxxxx. 3. Output three files from the control which one will install the Fanuc option.

CNCIDNUM.TXT MAINTINF.DAT SYS_CONF.DAT 3.1 Output SYS_CONF.DAT from the Fanuc 0i-MC control.

□ Insert the flash card into the slot of CNC. □ Set parameter write enable bit “PWE = 1". □ Set parameter “No.20=4” : I/O Port setting to "4". □ Press “EDIT” key to select “EDIT” mode.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 15 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007 The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

□ Press “SYSTEM” hard-key. □ Press “PARAM” soft-key. □ Press “SYSTEM” soft-key. □ Press “OPRT” soft-key. □ Press “PUNCH” soft-key. □ Press “EXEC” soft-key and the file “SYS_CONF.DAT” will output to the flash card.

3.2 Output MAINTINF.DAT from the Fanuc 0i-MC control.

Insert the flash card into the slot of CNC. Set parameter write enable bit “PWE = 1". Set parameter “No.20=4” : I/O Port setting to "4". Press “EDIT” key to select “EDIT” mode. Press “SYSTEM” hard-key. Press “PARAM” soft-key. Press “+” soft-key until one finds the “M-INFO” soft-key. Press “M-INFO” soft-key. Press “OPRT” soft-key. Press “EDIT” soft-key. Press “I/O” soft-key. Press “PUNCH” soft-key. Press “EXEC” soft-key and the file “MAINTINF.DAT” will output to the flash card.

3.3 Output CNCIDNUM.TXT from the Fanuc 0i-MC control.

Insert the flash card into the slot of CNC. Set parameter write enable bit “PWE = 1". Set parameter “No.20=4” : I/O Port setting to "4". Press “EDIT” key to select “EDIT” mode. Press “SYSTEM” hard-key. Press “PARAM” soft-key. Press “+” soft-key until one finds the “ID-INF” soft-key. Press “ID-INF” soft-key. Press “OPRT” soft-key. Press “PUNCH” soft-key. Press “EXEC” soft-key and the file “CNCIDNUM.TXT” will output to the flash card.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 16 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007 The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

4. E-mail those three files and Control type, Fanuc option P/O number and Control series number to cnc.options@gefanuc.com . Please see the picture for reference.

mailto:cnc.options@gefanuc.com

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 17 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

5. Wait until GE Fanuc e-mail the installation file back to you. The e-mail will be like the following format.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 18 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

6. Copy the attached file (example: R000014255.txt) to a PCMCIA memory card suitable for use in the Fanuc CNC.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 19 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007 The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

7. Rename the file to CNCOPSET.TXT 8. Insert the flash card into the slot of CNC 9. Set parameter write enable bit “PWE = 1" 10. Set parameter “No.20=4” : I/O Port setting to "4" 11. Press EDIT key to select EDIT mode. 12. Press SYSTEM hard-key 13. Press PARAM soft-key 14. Press OPRT soft-key 15. Press “+” soft-key to find out “OPREAD” soft-key. 16. Press OPREAD soft-key. 17. Press “EXEC” soft-key 18. Confirm the new option file was loaded into the control without errors. 19. Cycle power of the CNC by pressing the button on the operator panel. 20. Set PWE to "0" if it needs. 21. Confirm the options work properly (setup may be necessary)

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 20 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007 The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

V. Setup the parameter and test the Data Server function. 1. Procedure to Display the Ethernet Parameter Screen.

• Place the CNC in MDI mode. • Press function key “ SYSTEM” key on the MDI panel. • Press the right arrow soft key “+” several times until you see “ETHPRM” • When you press soft key “ETHPRM”, the "Ethernet Parameter" screen appears. • Press “OPRT” soft key on the LCD screen • Press “BOARD” soft key.

2. Procedure to set CNC Data Common to Ethernet and Data Server This data is setup to describe the CNC on the network. Without this data the CNC will not function correctly on the network

A. Place the CNC in MDI mode. B. Display the "Ethernet Parameter" screen.

a. Place the CNC in MDI mode (Press the MDI key on the machine pedant). b. Press function key “system” on the MDI panel. c. Press the right arrow soft key several times until you see “ETHPRM d. Press “OPRT” soft key on the LCD screen. e. When you press soft key “ETHPRM”, the "Ethernet Parameter" screen appears. f. Press “BOARD” soft key.

C. Press the PAGE UP/DOWN key to move the page 1/5: Ethernet Page 1/5. D. Using the cursor keys position the cursor on the line for the desired data( Input the right IP address for CNC

machine Data Server Card) to input. Validation Testing Data:

a. IP address – b. Subnet Mask – c. Router IP Address – d. Porter number—(on the next page)

E. Enter the desired data specified by the Customer using the MDI keys. Validation Testing Data:

a. IP address – 99.33.61.41 b. Subnet Mask – 255.255.252.0 c. Router IP Address – Leave Blank

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 21 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

Screen: 1/5

F. Press soft key “INPUT” or function key input to input the data. G. Repeat steps C to E for all values except the “ROUTER IP ADDRESS” H. Press PAGE DOWN key on the MDI panel and go to the screen 2/5 I. Setup the DATA SERVER Port 1: PORT NUMBER: 21

IP address – 99.33.61.40 USER NAME: FANUC PASSWORD: FANUC LOGIN DIR—LEAVE BLANK

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 22 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

Screen 2/5:

J. Setup the DATA SERVER Port 2: PORT NUMBER: 22

IP address – – 99.33.61.42 USER NAME: FANUC PASSWORD: FANUC LOGIN DIR—LEAVE BLANK Screen 3/5 is similar as screen 2/5.

K. Setup the DATA SERVER Port 3: PORT NUMBER: 23

IP address – 99.33.61.43 USER NAME: FANUC PASSWORD: FANUC

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 23 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

LOGIN DIR—LEAVE BLANK Screen 4/5 is similar as screen 2/5.

L. Setup the FTP SERVER

USER NAME: FANUC PASSWORD: FANUC Screen 5/5 : FTP Sever:

M. Cycle the CNC power.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 24 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

3. Setup the Ethernet connection on your computer Follow the Fanuc manual B-63644EN, Chapter 3.4 to setup. TCP/IP Properties:

a. IP address – 99.33.61.40 b. Subnet Mask – 255.255.252.0

4. Connect the physical network connection between CNC and PC.

5. TESTING THE SETUP: THE SIMPLY WAY – PING. Enter the following command on the PC. Click the START Click the RUN menu. Input the run window, input CMD,

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 25 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

Click OK, the following window comes out.

Input the following command and wait few seconds. Ping 192.168.0.1 If the following window comes out, the hardware setup is ok, otherwise check the PC and CNC.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 26 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

If the following window comes out, the hardware setup is wrong, otherwise check the PC and CNC

** You can use the Fanuc Servo guide to tune the axes. If the communication is ok, the setup is success.

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

TITLE

Fadal Machining Centers MAG INDUSTRIAL AUTOMATION SYSTEMS 20701 PLUMMER STREET, CHATSWORTH, CA 91311, USA TEL: (818) 407-1400, FAX: (818) 407-0020

Data Server Installation/test Procedure For FANUC 0i-MC Controlled VMC

DEPARTMENT REV ISSUE DATE DOC # PAGE REV

Engineering 01/12/07 MFG-0129 27 of 27 A

Form QAP-F6006 Rev A Confidential Printed On: 1:08 PM 6/8/2007

6. DISPLAY DATA SERVER STORAGE DIRECTORY

1. Press function key “PROG” . 2. For Series 18i// 0iMC

a. Press the continuation menu soft key “+” at the right end of the soft key menu. b. When you press soft key [HD-DIR], the Hard Disk File Dir screen appears. c. Select the desired page using the “PAGE UP/PAGE DOWN” keys. d. When you press soft key “SWITCH”, the HARD DISK FILE DIR (detail) screen appears.

END OF DOCUMENT

VISUAL AIDS

Below is the section which will be completed ONLY by Quality Assurance personnel prior to release of the document.

QUALITY RECORDS Ref. Doc.# DESCRIPTION ACCESS STORAGE

The electronic copy is the only controlled copy. All other copies are uncontrolled. The printed document is only current at the time it is printed. It is up to the user to insure that the printed copy is destroyed after use.

The Electronics and production Department Supervisor is responsible for document implementation and usage1. Procedure to Display the Ethernet Parameter Screen.2. Procedure to set CNC Data Common to Ethernet and Data Server5. TESTING THE SETUP: THE SIMPLY WAY – PING.

6. DISPLAY DATA SERVER STORAGE DIRECTORY