tips on correct - ues · tips on correct installation of gas struts - always install after...

GA

S S

PR

ING

S

155

GA

S S

PR

ING

S

156

GA

S S

PR

ING

S

157

TIPS ON CORRECT INSTALLATION OF

GAS STRUTS

- Always install after painting, welding etc.

- The gas strut should always be fitted with the piston pointing down.

- Temperature range -30C to +80C - Use suitable end fittings and angle joints to avoid coupling jamming.

- Gas struts are maintenance free, do not grease or lubricate shaft.

- Install without twisting.

- Avoid lateral forces.

- Protect piston against dirt, paint or damage.

- Output forces will vary approximately 4% for every 10C change in temperature.

C centre of gravityD moveable pivotE �xed pivotH hingeG weightL horizontal distance from centre of gravity to hingeW e�ective lever arm of gas strut = smallest distance gas strut = hinge EF1 force of gas strut

GA

S S

PR

ING

S

158

Corrosion Resistance Coated Black

Steel

ST400N-145 ST700N-485Gas Struts

MATERIAL

FINISH

L 2

C

B A

D

UES P/N Force F1 L' mm B' mm C' mm D' mm End Fi ngsST400N-145 400N 145 40 6 15 Eyelet Ø6.5ST50N-185 50N 185 60 6 15 Eyelet Ø6.5ST50N-195 50N 195 60 6 15 B/J 10mmST100N-195 100N 195 60 6 15 B/J 10mmST200N-195 200N 195 60 6 15 B/J 10mmST250N-195 250N 195 60 6 15 B/J 10mmST300N-195 300N 195 60 6 15 B/J 10mmST400N-195 400N 195 60 6 15 B/J 10mmST150N-235 150N 235 80 6 15 B/J 10mmST250N-235 250N 235 80 6 15 B/J 10mmST150N-305 150N 305 98 8 19 B/J 10mmST200N-305 200N 305 98 8 19 B/J 10mmST300N-305 300N 305 98 8 19 B/J 10mmST100N-315 100N 315 120 6 15 B/J 10mmST250N-315 250N 315 120 6 15 B/J 10mmST300N-325 300N 325 120 8 19 B/J 10mmST400N-325 400N 325 120 8 19 B/J 10mmST500N-325 500N 325 120 8 19 B/J 10mmST600N-325 600N 325 120 8 19 B/J 10mmST800N-325 800N 325 120 8 19 B/J 10mmST100N-375 100N 375 150 6 15 B/J 10mmST350N-375 350N 375 150 6 15 B/J 10mmST250N-380 250N 380 155 6 15 B/J 10mmST370N-390 370N 390 150 8 19 B/J 10mmST400N-405 400N 405 160 8 19 B/J 10mmST130N-431 130N 431 174 8 19 B/J 10mmST200N-431 200N 431 174 8 19 B/J 10mmST250N-431 250N 431 174 8 19 B/J 10mmST300N-431 300N 431 174 8 19 B/J 10mmST375N-431 375N 431 174 8 19 B/J 10mmST400N-431 400N 431 174 8 19 B/J 10mmST550N-440 550N 440 175 8 19 B/J 10mmST100N-485 100N 485 200 8 19 B/J 10mmST150N-485 150N 485 200 8 19 B/J 10mmST200N-485 200N 485 200 8 19 B/J 10mmST250N-485 250N 485 200 8 19 B/J 10mmST350N-485 350N 485 200 8 19 B/J 10mmST400N-485 400N 485 200 8 19 B/J 10mmST500N-485 500N 485 200 8 19 B/J 10mmST600N-485 600N 485 200 8 19 B/J 10mmST700N-485 700N 485 200 8 19 B/J 10mm

GA

S S

PR

ING

S

159


Steel

ST100N-501 ST450-605Gas Struts

MATERIAL

FINISH

L 2

C

B A

D

UES P/N Force F1 L' mm B' mm C' mm D' mm End Fi ngsST100N-501 100N 501 200 8 19 B/J 10mmST150N-501 150N 501 200 8 19 B/J 10mmST200N-501 200N 501 200 8 19 B/J 10mmST250N-501 250N 501 200 8 19 B/J 10mmST300N-501 300N 501 200 8 19 B/J 10mmST350N-501 350N 501 200 8 19 B/J 10mmST400N-501 400N 501 200 8 19 B/J 10mmST450N-500 450N 501 200 8 19 B/J 10mmST500N-501 500N 501 200 8 19 B/J 10mmST600N-501 600N 501 200 8 19 B/J 10mmST700N-501 700N 501 200 8 19 B/J 10mmST800N-498 800N 501 200 8 19 B/J 10mmST900N-500 900N 501 200 8 19 B/J 10mmST620N-517 620N 517 200 10 22 B/J 13mmST680N-517 680N 517 200 10 22 B/J 13mmST960N-517 960N 517 200 10 22 B/J 13mm

ST1200N-516 1200N 516 250 10 22 B/J & EyeST100N-525 100N 525 220 8 19 B/J 10mmST150N-525 150N 525 220 8 19 B/J 10mmST200N-525 200N 525 220 8 19 B/J 10mmST250N-525 250N 525 220 8 19 B/J 10mmST300N-525 300N 525 220 8 19 B/J 10mmST350N-525 350N 525 220 8 19 B/J 10mmST400N-525 400N 525 220 8 19 B/J 10mmST500N-525 500N 525 220 8 19 B/J 10mmST600N-525 600N 525 220 8 19 B/J 10mmST700N-525 700N 525 220 8 19 B/J 10mmST800N-525 800N 525 220 8 19 B/J 10mmST900N-525 900N 525 220 8 19 B/J 10mmST750N-560 750N 560 225 8 19 B/J 10mmST960N-540 960N 560 225 10 22 B/J 10mmST280N-565 280N 565 225 10 22 B/J 13mmST350N-565 350N 565 225 10 22 B/J 13mmST150N-585 150N 585 250 8 19 B/J 10mmST200N-585 200N 585 250 8 19 B/J 10mmST250N-585 250N 585 250 8 19 B/J 10mmST300N-585 300N 585 250 8 19 B/J 10mmST350N-585 350N 585 250 8 19 B/J 10mmST400N-585 400N 585 250 8 19 B/J 10mmST500N-585 500N 585 250 8 19 B/J 10mmST600N-585 600N 585 250 8 19 B/J 10mmST700N-585 700N 585 250 8 19 B/J 10mmST900N-585 900N 585 250 8 19 B/J 10mm

ST1000N-602 1000N 602 250 10 22 B/J 10mmST280N-605 280N 605 250 10 22 B/J 10mmST450N-605 450N 605 250 10 22 B/J 10mm

GA

S S

PR

ING

S

160


Steel

ST300N-610 ST1100N-840Gas Struts

UES P/N Force F1 L' mm B' mm C' mm D' mm End Fi ngsST300N-610 300N 610 250 8 19 B/J 10mm

ST300N-655 300N 655 275 10 22 B/J 10mmST700N-655 700N 655 275 10 22 B/J 10mm

ST750N-700 750N 700 300 10 22 Eyelet Ø8.1ST1200N-700 1200N 700 300 10 22 Eyelet Ø8.1


ST300N-715 300N 715 300 10 22 B/J 13mmST450N-715 450N 715 300 10 22 B/J 13mmST700N-715 700N 715 300 10 22 B/J 13mmST750N-715 750N 715 300 10 22 B/J 13mm

ST1200N-716 1200N 716 300 10 22 B/J 13mm

ST150N-816 150N 816 350 10 22 B/J 13mmST200N-816 200N 816 350 10 22 B/J 13mmST300N-816 300N 816 350 10 22 B/J 13mmST700N-816 700N 816 350 10 22 B/J 13mmST800N-816 800N 816 350 10 22 B/J 13mmST900N-816 900N 816 350 10 22 B/J 13mm


ST240N-825 240N 825 350 10 22 B/J 10mmST290N-825 290N 825 350 10 22 B/J 10mmST435N-825 435N 825 350 10 22 B/J 10mmST600N-825 600N 825 350 10 22 B/J 10mmST700N-825 700N 825 350 10 22 B/J 10mmST800N-825 800N 825 350 10 22 B/J 10mm

ST1100N-840 1100N 840 350 14 28 B/J 16mm

MATERIAL

FINISH

L 2

C

B A

D

GA

S S

PR

ING

S

161


Steel

46008 45075Gas Struts

MATERIAL

FINISH

L 2

C

B A

D

UES P/N Force F1 L' mm B' mm C' mm D' mm End Fi ngs46008 75N 185 68 6 15 B/J 10mm46010 100N 185 68 6 15 B/J 10mm46015 100N 305 105 8 18 B/J 10mm46005 50N 325 120 6 15 B/J 10mm46017 100N 325 120 6 15 B/J 10mm46022 150N 325 120 6 15 B/J 10mm46024 200N 325 120 6 15 B/J 10mm46031 250N 325 120 6 15 B/J 10mm46038 300N 325 120 6 15 B/J 10mm46047 350N 325 120 6 15 B/J 10mm46000 50N 365 150 6 15 B/J 10mm46020 100N 535 220 8 18 B/J 10mm46025 200N 535 220 8 18 B/J 10mm46035 250N 535 220 8 18 B/J 10mm46040 300N 535 220 8 18 B/J 10mm46050 350N 535 220 8 18 B/J 10mm46060 400N 535 220 8 18 B/J 10mm46070 450N 535 220 8 18 B/J 10mm46085 500N 535 220 8 18 B/J 10mm46093 600N 535 220 8 18 B/J 10mm46140 300N 595 245 10 21 B/J 13mm46141 500N 595 245 10 21 B/J 13mm46142 600N 595 245 10 21 B/J 13mm46143 800N 595 245 10 21 B/J 13mm46055 400N 820 350 10 21 B/J 13mm46080 500N 820 350 10 21 B/J 13mm46090 600N 820 350 10 21 B/J 13mm46110 700N 820 350 10 21 B/J 13mm46120 800N 820 350 10 21 B/J 13mm46130 900N 820 350 10 21 B/J 13mm45075 450N 1105 500 10 21 Eyelet 8.1Ø

GA

S S

PR

ING

S

162

Polished

Stainless Steel 316

47010 ST700N-816SSGas Struts - Stainless Steel

MATERIAL

FINISH

L 2

C

B A

D

UES P/N Force F1 L' mm B' mm C' mm D' mm End Fi ngs47010 100N 315 125 6 15 B/J 10mm

ST200N-315SS 200N 315 125 6 15 B/J 10mmST350N-325SS 350N 325 125 6 15 B/J 10mm

ST200N-525SS 200N 525 220 8 18 B/J 10mm47050 300N 525 220 8 18 B/J 10mm47060 400N 525 220 8 18 B/J 10mm

ST600N-525SS 600N 525 220 8 18 B/J 10mm

ST400N-816SS 400N 816 365 10 22 B/J 10mmST500N-816SS 500N 816 365 10 22 B/J 10mmST600N-816SS 600N 816 365 10 22 B/J 10mmST700N-816SS 700N 816 365 10 22 B/J 10mm

47110 900N 816 355 10 22 B/J 10mm

Brackets for Gas Struts91002

54 4.2

40

12.1 6.1

14.8

2.5

66

26.5

10

54.2

Raw

33 x 31 x 48 mm

Stainless SteelMATERIAL

FINISH

FEATURES

91003Brackets for Gas Struts

Raw


FINISH

53.5 39.3

14.7

6.1

4.2 66

25 20 2.5

10

54.2

GA

S S

PR

ING

S

163


Raw


FINISH

37

2.5 10.6

10

38

51

31

8.5

1.5

5.9


Raw


FINISH

50.8

34.4

19

38

5.6

10

28

20

11

2.5

19


38

50.8

19 22

5.6

7.5

11

28

2.5

10

19

Raw


FINISH

GA

S S

PR

ING

S

164

FEATURES479500 - Ball socket M6657735 - Security pinST022721 - Ball stud

Thread size M8

MATERIALSteel

479500, 657735, ST022721End Fittings for Gas Struts

479500 - ZP657735 - ChromeST022721 - Black

FINISH

FEATURES020877 - Ball socket M8012386 - Security pinST022730 - Ball stud

Thread size M8

MATERIALSteel

020877, 012386, ST022730End Fittings for Gas Struts

020877 - ZP012386 - Chrome072796 - Black

FINISH

MATERIALSteel

630269Eyelet

ZPFINISH

10

R11

8.1

GA

S S

PR

ING

S

165

MATERIALSteel

630276End Fitting - Gas Struts

ZPFINISH

MATERIALNylon

698482, 4486MDEnd Fitting - Gas Struts

BlackFINISH

MATERIALSteel

552550End Fitting - Gas Struts

ZPFINISH

17

17

8,1

GA

S S

PR

ING

S

166

MATERIAL 542104 - Steel543004 - Stainless Steel

542104 - ZP543004 - Raw

FINISH

542104, 543004Door Retainer

Heavy duty door retainer. The door retainer automatically locks at theend position. Universal left or righthand application. Screw-in or weld-on mounted.

FEATURES

Minimum door width in mmYXOpening

Angle

Closed Position

Open Position

GA

S S

PR

ING

S

167

ZP

SteelMATERIAL

FINISH

7/3099, 7/03098Telescopic Support Stay

290/495mm7/3099 - Bottom bracket only.7/03089 - 2 Brackets.

FEATURESBRACKET

51 300

300 12 9

14.5

35

8.6

9

9 28

57

7/25621Telescopic Support Stay “Safety Catch” Release

ZP

SteelMATERIAL

FINISH

285/470 mm 2 x Brackets

FEATURES

This standard model is representative of a family of stays for top-hinged doors and hatches. The ‘saftey-catch’ design means the stay must be manually released - a useful precaution against vibration or accidental closure.

Features include: Stay extends as door is opened and locks in the extended position. The safety catch must be depressed manually before it will close. Clear zinc-plated. To special order, yellow passivate or black zinc-plated. Standard brackets as illustrated for plant-on fitting. Mild steel throughout.

Closed 285mmExtended 470mm

GA

S S

PR

ING

S

168

MATERIAL Steel, Brass, Nylon (Washer)

Chrome

125g

FINISH

S-20R, S-20LLid Stay w/ Catch RH & LH

WEIGHT

FEATURESLid stay with ball catch for light weight door.Catch automatically holds lid in opened position.Can be installed individually or in pairs.

S-20R: Right HandS-20L: Left Hand

tips on correct - ues · tips on correct installation of gas struts - always install after...

Documents