T302

N302

T304

N304

T305

T307

T308

N308

T309

T312

D2000 3 D2000 3 D30 D30 D40 1 5 6D2000 3 D2000 3 D30 D30 D40 1 5 6D2000 3 D2000 3 D30 D30 D40 1 5 6

UCONNMODETIMER

N312

T313

N313

T314

T315

N315

T316

T381

N381

T323

D1 10 D100 D0 D0 D1 D30 D600 D1 INVALIDD1 10 D100 D0 D0 D1 D30 D600 D1 INVALIDD1 10 D100 D0 D0 D1 D30 D600 D1 INVALID

MML_RNCID

CHANNELRETRYTIMERLEN

CHANNELRETRYHOTIMERLEN

RABMODIFYTIMERLEN

ZERORATEUPFAILTORELTIMERLEN

MML_RNCID

T300

N300

1 5 2 5 180 1 D2000 32 5 2 5 180 2 D2000 33 5 2 5 180 3 D2000 3

UIDLEMODETIMERUCOIFTIMER

T312

N312

MML_RNCID

CNID

CNOPINDEX

RSTRSNDNUM

RAFCTMR

RATCTMR

STATEINDTMR

6 D1 1 1 0 2 30000 120000 200006 D1 2 3 0 2 30000 120000 200006 D1 3 1 0 2 30000 120000 20000

2 0 2 30000 120000 200001 0 2 30000 120000 200003 0 2 30000 120000 20000

UIUTIMERANDNUM

IGORTMR

INTRTMR

MML_RNCID

PSINACTTMRFORCON

PROTECTTMRFORCON

PSINACTTMRFORSTR

PROTECTTMRFORSTR

PSINACTTMRFORINT

PROTECTTMRFORINT

20000 60000 1 20 20 20 20 20 2020000 60000 1 20 20 20 20 20 2020000 60000 2 20 20 20 20 20 2020000 60000 220000 60000 320000 60000 3

UPSINACTTIMER

PSINACTTMRFORBAC

PROTECTTMRFORBAC

PSINACTTMRFORIMSSIG

PROTECTTMRFORIMSSIG

PSINACTTMRFORPREFSTDRM

PSINACTTMRFORFSTDRMDCH

PSINACTTMRFORFSTDRMFACH

MML_RNCID

RRCUERSPTMR

20 20 20 20 360 4 10 1 500020 20 20 20 360 4 10 2 500020 20 20 20 360 4 10 3 5000

USTATETIMER

RRCIURELCMDTMR

RRCRELRETRANTMR

RRCPAINGTYPE1TMR

RRCINITDTTMR

RRCRLCACKCMPTMR

RBSETUPRSPTMR

UECAPENQRSPTMR

RBRECFGRSPTMR

RBRELRSPTMR

RLSETUPRSPTMR

5000 350 5000 5000 1000 5000 5000 5000 5000 50005000 350 5000 5000 1000 5000 5000 5000 5000 50005000 350 5000 5000 1000 5000 5000 5000 5000 5000

USTATETIMER

RLRECFGREADYTMR

RLRELRSPTMR

RLRSTRTMR

DRLAAL2ESTINDTMR

DRLRECFGCMITTMR

HOCELLUPDATERSPTMR

HORELOCREQTMR

HOPAGINGRSPTMR

HOASUTMR

HOWTTRCHRECFGRSPTMR

5000 5000 11000 5000 5000 5000 5000 5000 5000 50005000 5000 11000 5000 5000 5000 5000 5000 5000 50005000 5000 11000 5000 5000 5000 5000 5000 5000 5000

HOPHYCHRECFGTMR

RELOCCMDTMR

RELOCIURELCMDTMR

RELOCDATAFWDTMR

RELOCANOTHERTMR

RELOCCOMMITTMR

RELOCMOBILCONFTMR

RELOCPHYCHRECFGTMR

RELOCUTRANHOCMPTMR

RELOCFAILIURELCMDTMR

5000 10000 45000 20000 5000 15000 5000 5000 10000 50005000 10000 45000 20000 5000 15000 5000 5000 10000 50005000 10000 45000 20000 5000 15000 5000 5000 10000 5000

SYSHOPSRESUMETMR

RRCSECRTMODECMPTMR

UECNTCHECKRSPTMR

CMCHRSRCRSPTMR

IUCSRELNORABTMR

IUPSRELNORABTMR

RRCCONNREJWAITTMR

MML_RNCID

CELLRESELECTTIMER

10 5000 5000 5000 300 300 4 1 18010 5000 5000 5000 300 300 4 2 18010 5000 5000 5000 300 300 4 3 180

UUESTATETRANSTIMER

BEF2PSTATETRANSTIMER

BED2FSTATETRANSTIMER

BEH2FSTATETRANSTIMER

RTDH2FSTATETRANSTIMER

BEE2FSTATETRANSTIMER

BECPC2FSTATETRANSTIMER

RTCPC2FSTATETRANSTIMER

BED2EFACHSTATETRANSTIMER

BEH2EFACHSTATETRANSTIMER

RTDH2EFACHSTATETRANSTIMER

65535 5 5 180 2 5 180 5 5 18065535 5 5 180 2 5 180 5 5 18065535 5 5 180 2 5 180 5 5 180

UUESTATETRANSTIMER

BECPC2EFACHSTATETRANSTIMER

RTCPC2EFACHSTATETRANSTIMER

MML_RNCID

5 180 15 180 25 180 3

TIMERT302N302

T304

N304

T305

T307

T308

N308

T309

T312

N312

T313

N313

T314

T315

N315

T316

T381

N381

T323

Details

Maximum number of retransmissions of CELL UPDATE/URA UPDATE.Protocol default value is 3.

Maximum number of retransmissions of UE CAPABILITY INFORMATION. Protocol default value is 3

T307 is started after T305 has expired and the UE detects "out of service area". It is stopped after the UE detects "in service area". The UE will enter idle mode upon expiry.

Maximum number of retransmissions of CELL UPDATE/URA UPDATE.Protocol default value is 1

Maximum number of successive "in sync" indications received from L1.

Maximum number of successive "out of sync" indications received from L1.

Maximum number of resend times of message "RRC CONNECTION SETUP" or "CELL UPDATE CONFIRM". default value is 1.

T302 is started after the UE transmits the CELL UPDATE/URA UPDATE message and stopped after the UE receives the CELL UPDATE CONFIRM/URA UPDATE CONFIRM message. CELL UPDATE/URA UPDATE will be resent upon the expiry of the timer if V302 less than or equal to N302; otherwise, the UE will enter idle mode.

T304 is started after the UE sends the UE CAPABILITY INFORMATION message and stopped after the UE receives the UE CAPABILITY INFORMATION CONFIRM message. UE CAPABILITY INFORMATION will be resent upon the expiry of the timer if V304 less than or equal N304; otherwise the cell update procedure will be initiated. Protocol default value is 2000.

T305 is started after the UE receives CELL UPDATE CONFIRM/URA UPDATE CONFIRM in CELL_FACH, URA_PCH or CELL_PCH state. It is stopped after the UE enters another state. CELL UPDATE will be transmitted upon the expiry of this timer if T307 is not activated and the UE detects "in service area";

T308 is started after the UE transmits RRC CONNECTION RELEASE COMPLETE. This message will be sent upon the expiry of the Timer if V308 less than or equal to N308, otherwise, the UE will enter idle mode.

T309 is started after the UE is reselected to a cell belonging to another radio access system in connected mode, or the CELL CHANGE ORDER FROM UTRAN message is received. It is stopped after the UE is successfully connected in the new cell. The UE will continue the connection to UTRAN upon expiry. Protocol default value is 5.

T312 is started when UE starts to establish a DCH, and stopped when UE detects consecutive N312 "in sync" indications from L1. It indicates physical channel setup failure upon the expiry of the timer.

T313 is started after the UE detects consecutive N313 "out of sync" indications from L1. T313 is stopped after the UE detects consecutive N315 "in sync" indications from L1.It indicates Radio Link (RL) failure upon expiry.

T314 is started when the criteria for radio link failure are fulfilled and only radio bearers (RBs) associated with T314 exist.T314 is stopped after the Cell Update procedure has been completed. In case of the RL failure when the UE is in CELL_DCH state, If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the corresponding T314 (or T315), CELL UPDATE will be resent for RL reconfiguration (this operation relates to T302 and N302). T314 should be set greater than T302*N302. In case of the expiry of T314, the corresponding service RBs will be removed.

T315 is started when the criteria for radio link failure are fulfilled, and only the radio bearer associated with T315 exists.T315 is stopped after the Cell Update procedure has been completed. In case of the RL failure when the UE is in CELL_DCH state, T315 (or T314) is started and CELL UPDATE is sent. If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the corresponding T315 (or T314), CELL UPDATE will be resent for RL reconfiguration (this operation relates to T302 and N302). T315 should be set greater than T302*N302. In case of the expiry of T315, the corresponding service RBs will be removed.

T315 is started when the criteria for radio link failure are fulfilled, and only the radio bearer associated with T315 exists.T315 is stopped after the Cell Update procedure has been completed.In case of the RL failure when the UE is in CELL_DCH state, T315 (or T314) is started and CELL UPDATE is sent. If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the corresponding T315 (or T314), CELL UPDATE will be resent for RL reconfiguration (this operation relates to T302 and N302). T315 should be set greater than T302*N302. In case of the expiry of T315, the corresponding service RBs will be removed.

T316 is started after the UE detects "out of service area" in URA_PCH or CELL_PCH state.T316 is stopped after the UE detects "in service area".The cell update procedure will be initiated upon the expiry of the timer if "in service area" is detected; otherwise, T317 will be started. The UE will enter CELL_FACH state and initiate cell update procedure when the UE detects "in service area". Protocol default value is 30.

T381 is started after the RNC send message "RRC CONNECTION SETUP"(or "CELL UPDATE CONFIRM"). If T381 expire and RNC does not receive "RRC CONNECTION SETUP COMPLETE"(or the response of "CELL UPDATE CONFIRM") and V381 is smaller than N381, RNC resend "RRC CONNECTION SETUP"(or "CELL UPDATE CONFIRM") and restart timer T381 and increase V381. If RNC receive "RRC CONNECTION SETUP COMPLETE"(or the response of "CELL UPDATE CONFIRM"), T381 will be stopped. Default value is 600ms.

If the UE checks that no PS/CS data is transmitted, the UE will send the SIGNALLING CONNECTION RELEASE INDICATION message to the RNC, informing the RNC to terminate the PS data session. Meanwhile, the UE starts T323. The UE shall be inhibited from sending the SIGNALLING CONNECTION RELEASE INDICATION message with the IE "Signalling Connection Release Indication Cause" set to "UE Requested PS Data session end" whilst timer T323 is running.

Default Value RecommendedD2000

3

D2000

3

D30

D30

D40

1

5

6

D1

10

D100

D0

D0

D1

D30

D600

D1

INVALID