thermochemistry energy enthalpy specific heat calorimetry phase changes
TRANSCRIPT
THERMOCHEMISTRY
EnergyEnthalpySpecific HeatCalorimetryPhase Changes
INTRODUCTIONChemical change generally involves energy.
Thermodynamics: the study of energy and its transformations. (energy, work, heat)
Thermochemistry: the study of the relationship between chemical reactions and energy changes involving heat.
UNITS OF ENERGYSI unit for energy: Joule (J). Kilojoules (kJ) are commonly used.
1 J = (1kgm2)/s2
Another unit: calorie (cal).
1 cal = 4.184 J (exactly)
SYSTEM AND SURROUNDINGSSystem: portion we single out for study. Example: just the reacting chemicals in a beaker
Surroundings: everything else. Example: beaker the chemicals are in, the room, the universe
FIRST LAW OF THERMODYNAMICS
“Energy is conserved.” Any energy that is lost by the system must be gained by the surroundings, and vice versa.
WRITING THERMODYNAMIC QUANTITIES
Thermodynamic quantities have three parts:
Numerical value, unit, and sign (+ or -) + means system gained energy from surroundings
- means system lost energy to surroundings
Don’t forget to include the sign when writing thermodynamic quantities!
RELATING HEAT TO A SYSTEM
Chemists look at heat and work in relation to the system. q = heat +q = heat added to system (endothermic) -q = heat removed from system (exothermic)
EXOTHERMIC REACTIONSIn an exothermic reaction, system
gives off heat, surroundings heat up. Ex: combustion reactions
ENDOTHERMIC REACTIONSIn an endothermic reaction, system absorbs heat, surroundings get colder. Ex: portable cold packs
CALORIMETRY Heat flow from a chemical rxn can be determined by measuring temp changes.
Calorimetry: measurement of heat flow
Calorimeter: apparatus used to measure heat flow
HEAT CAPACITY
Heat Capacity (J/K or J/°C): the amount of heat required to raise the temp of an object by 1K (1°C).
Change in K is same as change in °C.
The greater the heat capacity, the greater the heat required to produce a change in temp.
SPECIFIC HEAT CAPACITY Specific Heat Capacity: amount of heat
needed to raise the temp of 1 gram of a substance by 1K.
Units: J/gK or J/g°C Cp means specific heat capacity at constant
pressure
q = Cp m∆T
q = heat (J or cal); m = mass of substance (g);
∆T = final temp- initial temp (K or °C)
Know the specific heat capacity of water:
4.184 J/g°C or 1 cal/g°C
CALCULATIONS WITH SPECIFIC HEAT
Calculate the quantity of heat absorbed by 50.0g of rocks if their temp increases by 12°C. Assume the heat capacity is 0.82 J/g K.
What temp change would these rocks undergo if they emitted 450. kJ of heat?
CALCULATIONS WITH SPECIFIC HEAT
How much heat is needed to warm 250.g of water from 22°C to 98C?
(Remember: specific heat of water is 4.184 J/g K)
CONSTANT-PRESSURE (COFFEE CUP) CALORIMETRY
We can easily measure heat change in a coffee cup calorimeter since the cup is not sealed and we have constant atmospheric pressure.
ASSUMPTIONS WHEN USING A CONSTANT-PRESSURE CALORIMETER
The calorimeter perfectly prevents the gain or loss of heat from the solution to the surroundings so heat gained by the solution comes only from the chemical rxn under study.
The calorimeter itself does not absorb heat. Reasonable because polystyrene cups have very low thermal conductivity and heat capacity.
DETERMINING HEAT IN A CONSTANT-PRESSURE CALORIMETER
The heat gained by the solution is the same magnitude but opposite sign as the heat given off in the rxn: qsol’n= -qrxn
We measure the temp change of the sol’n to measure the q of the reaction.
qsol’n= Cp(sol’n )x g(sol’n) x ∆T(sol’n)= -qrxn
A CALORIMETER CALCULATION! A coffee cup calorimeter contains 150.0 g of water at 25.1⁰C. A 121.0 g block of copper metal is heated to 100.4 ⁰C by putting it into a beaker of boiling water. After the hot copper is added to the calorimeter and the contents are stirred, the temperature of the water in the cup reaches 30.1⁰C. Given the specific heat of water as 4.184 J/g ⁰C, calculate the specific heat of copper.
Q = CP(GAS)M∆T
q = Cp(sol)m∆T
q = Cp(liquid)m∆T
q = m∆Hvap
q = m∆Hfus