the structurally glazed folding system with exterior “all ... › sites › default › files ›...

SPECIFICATIONS AND DETAILS SUBJECT TO CHANGE WITHOUT NOTICE©2016 Nana Wall Systems, Inc.www.nanawall.com

1

The SL82 is a thermally broken aluminum folding panel system that presents a stunning almost uninterrupted exterior glass façade combined with weather resistance and overall superior performance. Exterior layered glass overlapping the slim surrounding aluminum profile closely achieves the highly aesthetic quality of an edge-to-edge all-glass system. It is designed to provide an opening glass wall or storefront up to 39’ (12 m) wide (see Maximum Size Chart). The SL 82 is available in various configurations utilizing one to twelve panels (see elevation drawings). An option for swing entry/egress panel(s) is available. Units can only be inward opening (see details in the section drawings).

Structural Glazing and Slim Profile Provides a Stunning Glass Façade When the Unit is Closed

The SL82 is distinguished by its high design quality, harmonious, svelte appearance, minimalist accents and innovative technology.

Winner of Two Prestigious Design Awards

The NanaWall SL82 Structurally Glazed Folding Wall System in the winner of the coveted 2010 reddot design award and the iF product design award. The SL82 opens completely new perspectives for the world of modern architecture.

High Weather Resistance

The system is engineered to provide high weather resistance and structural performance. Three levels of seals provide effective protection from wind pressure and driving rain. Excellent independent testing results were achieved per AAMA/WDMA/CSA 101/I.S.2/A440 fenestration standards. See the “Performance and Testing Results” section for more details.

Superior Thermal PerformanceSuperior U-Values are achieved with a specially designed web of polyamide plastic reinforced with glass fibers thermal break in panel and frame profiles that are 3 1/8” (80 mm) thick. Multi-chamber profiles with 1 3/16” (30 mm) wide quadruple thermal break and cavities can accommodate either double or triple insulated glass provides the best heat insulation.

Superior Acoustical Performance

The same thermal break design that provides a superior thermal performance also provides superior acoustical performance.

Floor Supported System

This system is ideal for applications where load-bearing capability of the header is a concern. The system’s main weight is carried by the floor track. The upper track is merely a guide.

Width/Height Adjustments

Even after installation, the hinges on the SL82 are adjustable in both vertical and horizontal directions. The folding glass doors can easily be height adjusted by about 5/16” (8 mm) which is important if building settling occurs. Stainless steel hinge pins and screws are used.

Sill Options

Besides the higher weather performance sill, a thermally broken recessed flush sill, low profile saddle sill and thermally broken intermediate sill (as shown in section drawings) are available as an option in a clear or dark bronze anodized finish.

The Structurally Glazed Folding System with Exterior “All Glass” Aesthetic

INTRODUCTION | SL82


2

Choice of Finishes for Frame and Panels

In addition to the choices from the NanaWall Powder Coating Finish Chart, the full range of RAL high gloss and matte powder coatings are available as well as anodized finishes.

Glazing

Standard units supplied are either glazed with 1 3/16” (30 mm) double insulated glass or 1 1/2” (38 mm) triple insulated clear safety, Low-E safety, other high performing safety glass or other glass and/or thickness available on request. See “Glazing” in the General Introduction section for other glass thickness possible.

Weatherstripping

All weather stripping (consisting of EPDM or brush seals) is provided for sealing between panels and between panels and frames (see section drawings).

Sliding/Folding Hardware

For sliding and folding pair of panels, a floor-supported two roller lower running carriage is attached between each pair of panels. For the end pair of folding panels in a train of pairs of folding panels, a different floor-supported two roller running carriage is attached at the end of the unattached panel. An upper running carriage is attached as a guide at the same panel locations as the lower running carriage (see the section drawings). The lower running carriage is constructed to ensure even distribution of pressure on both rollers.

Rollers are stainless steel and have sealed bearings to ensure easy, quiet and smooth operation as well as resistance to extreme temperature. Two to six clear or dark bronze anodized hinges per connection are provided to connect panels together and to connect panels to the frame.

Locking Hardware

For each pair of folding panels (except for the pair to be opened first in a unit with no swing panel) provided is a two point locking hardware consisting of top and bottom locking rods operated by a 180° turn of a handle on the inside only with a stroke of 15/16” (24 mm). If there is a swing panel, there is the following hardware option on the main entry panel:

Multi-point Locking: Consisting of lever handles on both sides, a lockset, lockable latch, deadbolt and rods at the top and the bottom. After turn of key or thumb turn, depression of handles withdraws latch, lifting of handles engages rods and turn of key or thumb turn engages deadbolt and locks. Available with profile cylinder or with SFIC adapter.

For a unit with no swing panel, on the folding pair to be opened first, provided is two point locking hardware consisting of top and bottom polyamide capped locking rods operated by a 180° turn of an L-shaped handle and a flat handle on the outside. Lockable with a lockset. Turn of key or thumb turn operates lock.

For a unit where locking/handles inside only is desired, for examples in window applications, on all swing panels or pair of folding panels to be opened first, provided is two point locking with a handle on the inside only.

Handle Options

Matching stainless steel lever, flat and L-shaped handles are available in brushed satin or black titanium finishes.

INTRODUCTION | SL82


3

INTRODUCTION | SL82

The NanaWall SL82 Structurally Glazed Folding System

800.873.5673 nanawall.com 3

All-Glass AestheticsLayered glass overlapping the slim protective sur-rounding aluminum profile achieve the highly aesthet-ic quality of an edge-to-edge all-glass system.

Concealed, Adjustable HingesExpansion and contraction problems are minimized with variable inter locking of profiles and adjustable hinges.

Compact StackingA minimum of space is taken up for stacking.

Long Term Ease of OperationState-of-the-art rollers with sealed ball bearing carri-ers and height adjustment features provide long term ease of operation.

Sill OptionsFlush and high performance sills available.

Hardware OptionsA choice of locking options and handle shapes and finishes are available. Custodial hardware is also available.

SecuritySecure with concealed multi-point locking that oper-ates easily with a turn of the handle.

Clean LinesThe structurally glazed door panels are created by mounting the dual or triple pane glass to the exterior of the structural door frames in a slim channel that is virtually invisible from the exterior. The proprietary triple wraparound sealing process protects the glass edge when opening and closing the system.

CE MarkCE Mark for air permeability, water tightness and wind resistivity. The CE mark serves as verification that the product conforms with the essential requirements of the Construction Products Directive (CPD), a legal mandate of the European Commission. CE certified windows and doors provide building professionals with a uniform set of technical standards to evaluate and specify product performance with added assur-ance that NanaWall products are safe and fit for purpose.

The NanaWall SL82 Structurally Glazed Folding System


4

TESTING RESULTS | SL82

Higher Weather Performance (Raised) SillSL82

TYPE OF TESTSTANDARD UNIT

(INWARD OPENING UNITS)

UNIT WITH ADDITIONAL WEEPHOLES


Air Infiltration q ASTM E-283,cfm/ft2 and NFRC 400

@ 1.57 psf (75 Pa): 0.02 (.12 L/s/m2) @ 1.57 psf (25 mph): 0.13 (.66 L/s/m2)

@ 6.24 psf (300 Pa):

0.09 (.46 L/s/m2)

A3 w

@ 6.24 psf (50 mph):

0.27 (1.37 L/s/m2)

A3 w

Water Penetration qASTM E-547 and E-331

No uncontrolled water entry

@ 6 psf (300 Pa).

B2 w


@ 12 psf (580 Pa).

B4 w(Extra weepholes in outer chamber and

lower exterior sill face by others)

Structural Load Deflection qASTM E-330: pass

See Design Windload Charts forother sized panels

Note that the structural test pressures were50% higher than the design pressures.

DESIGN PRESSURE w DESIGN PRESSURE w

Positive

@ 30 psf

(1440 Pa)

Negative

@ 40 psf

(1920 Pa)

Positive

@ 30 psf

(1440 Pa)

Negative

@ 40 psf

(1920 Pa)

Windload Resistance: C1 (+/- 720 Pa) wBlow-out: C3 (+2160 Pa, -2880 Pa) w


Forced Entry Resistance q

In accordance with ASTM F-842 Grade 40, AAMA 1304 and CAWM 300 requirements

F2 w

Cycle Testing eDIN 1191/12400

Windows and Pedestrian Doors -Mechanical Durability

Raised or flush sill

10,000 cycles

q Excerpts of results of a 9’10” W x 8’6” H three panel unit tested by Architectural Testing, Inc., Fresno, CA, an independent testing laboratory, in October 2010 per AAMA/WDMA/CSA 101/1.5.2/A440 Fenestration Standards.

w Results per Canadian CGSB-82.1-M89

e The above is a series of test results, conducted in Germany, on the SL82 Structurally Glazed Folding System in accordance with European Standards. Three Panel Unit 3000 mm (9’ 10”) wide x 2500 mm (8’ 2”) high; glazing is 6 mm (1/4”) glass / 20 mm (3/4”)

air space / 4 mm (5/32”) glass.

NOTES

The SL82 is CE Mark Certified. The CE Mark serves as verification that the product conforms with the essential requirements of the Construction Products Directive (CPD),

a legal mandate of the European Commission. CE certified windows and doors provide professionals with a uniform set of technical standardsto evaluate and specify product performance with added assurance that NanaWall products are safe and fit for purpose.


5

TESTING RESULTS | SL82


TYPE OF TESTSTANDARD UNIT


UNIT WITH ADDITIONAL WEEPHOLES


Air Infiltration q ASTM E-283,cfm/ft2 and NFRC 400

@ 1.57 psf (75 Pa): 0.02 (.12 L/s/m2) @ 1.57 psf (25 mph): 0.13 (.66 L/s/m2)

@ 6.24 psf (300 Pa):

0.09 (.46 L/s/m2)

A3 w

@ 6.24 psf (50 mph):

0.27 (1.37 L/s/m2)

A3 w

Water Penetration qASTM E-547 and E-331


@ 6 psf (300 Pa).

B2 w


@ 12 psf (580 Pa).

B4 w(Extra weepholes in outer chamber and

lower exterior sill face by others)

Structural Load Deflection qASTM E-330: pass

See Design Windload Charts forother sized panels

Note that the structural test pressures were50% higher than the design pressures.

DESIGN PRESSURE w DESIGN PRESSURE w

Positive

@ 30 psf

(1440 Pa)

Negative

@ 40 psf

(1920 Pa)

Positive

@ 30 psf

(1440 Pa)

Negative

@ 40 psf

(1920 Pa)



Forced Entry Resistance q

In accordance with ASTM F-842 Grade 40, AAMA 1304 and CAWM 300 requirements

F2 w

Cycle Testing eDIN 1191/12400

Windows and Pedestrian Doors -Mechanical Durability

Raised or flush sill

10,000 cycles

q Excerpts of results of a 9’10” W x 8’6” H three panel unit tested by Architectural Testing, Inc., Fresno, CA, an independent testing laboratory, in October 2010 per AAMA/WDMA/CSA 101/1.5.2/A440 Fenestration Standards.

w Results per Canadian CGSB-82.1-M89

e The above is a series of test results, conducted in Germany, on the SL82 Structurally Glazed Folding System in accordance with European Standards. Three Panel Unit 3000 mm (9’ 10”) wide x 2500 mm (8’ 2”) high; glazing is 6 mm (1/4”) glass / 20 mm (3/4”)

air space / 4 mm (5/32”) glass.

NOTES

The SL82 is CE Mark Certified. The CE Mark serves as verification that the product conforms with the essential requirements of the Construction Products Directive (CPD),

a legal mandate of the European Commission. CE certified windows and doors provide professionals with a uniform set of technical standardsto evaluate and specify product performance with added assurance that NanaWall products are safe and fit for purpose.



6

MAXIMUM SIZE CHART | SL82

Up to twelve panels are possible in a unit. Any custom panel size is possible up to the maximum size shown.

Solid dark line on chart indicates maximum frame height possible for a given maximum frame width with double glazing for all configurations.

The maximum size limits are based on maximum glass weight of 5.2 lbs/ft2 (25 kgs/m2) or net glass thickness of 3/8" (10 mm).

For heavier glass (net glass being thicker) and/or for triple glazing, this maximum size limit chart will not apply.

For configurations with no swing panels, the minimum panel width needed is 2'7" (800 mm).

9’2” (2800)

8’10” (2700)

8’6” (2600)

8’2” (2500)

7’10” (2400)

7’6” (2300)

7’2” (2200)

6’10” (2100) and below

FR

AM

E H

EIG

HT

OF

UN

IT

NOTE: English dimensions are approximate. Dimensions in parenthesis are in millimeters.

NU

MB

ER

OF

PA

NE

LS

IN

UN

IT

11'11"

(600)2’3”

(700)2’7”

(800)2’11”

(900)3’3”

(1000)

23'11"

(12004’7”

(1400)5’3”

(1600)5’10”

(1800)6’6”

(2000)

35"10"

(1800)6’10”

(2100)7’10”

(2400)8’10”

(2700)9’10”

(3000)

47'10"

(2400)9’2”

(2800)10’6”

(3200)11’9”

(3600)13'1”

(4000)

59'10"

(3000)11’5”

(3500)13’1”

(4000)14’9”

(4500)16'4”

(5000)

611'9"

(3600)13’10”(4200)

15’8”(4800)

17’8”(5400)

19’8”(6000)

713'10"

(4200)16’

(4900)18’4”

(5600)20’7”

(6300)22’10”

(7000)

815'8"

(4800)18’4”

(5600)20’11”

(6400)23’6”

(7200)26’1”

(8000)

917'9"

(5400)20’7”

(6300)23’6”

(7200)26’5”

(8100)29’4”

(9000)

1019'8"

(6000)22’10”(7000)

26’1”(8000)

29’4”(9000)

32’9”(10000)

1121'7"

(6600)25’1”

(7700)28’8”

(8800)32’5”

(9900)36'1"

(11000)

1223'6"

(7200)27’4”

(8400)31’5”

(9600)35’5”

(10800)39’4"

(12000)

FRAME WIDTH OF UNIT


7

RELATIONSHIP OF FRAME, PANEL AND GLASS DAYLIGHT OPENING SIZES | SL82

Dimensions in millimeters unless noted. Calculation applies to the standard stiles and rails. Glass dimensions of all panels in a unit are equal.Nominal Panel Height (PH) is defined as Glass Daylight Opening Height + 131 = Glass Daylight Opening Height + 5 3/16”. Nominal Panel Width (PW) is defined as Glass Daylight Opening Width + 131 = Glass Daylight Opening Width + 5 3/16”.

Panel Height is as seen from the inside on an inward opening unit and is as seen from the outside on an outward opening unit. Please note that with the overlap of the head jamb and the sill with the panel, the Clear Opening Height will not be the same as the Panel Height.

See Cross-Section Details of both stiles of each panel to determine actual Panel Width. With astragals, overlapping, etc., the actual Panel Width not only varies with position of panel in a configuration, but the inside and outside surface widths of each stile may be different. Running posts and astragals are not included in Panel Width dimensions.

For each configuration, the Frame Width (FW) is the sum of the nominal Panel Width (PW) x the number of panels + a number (N) which is the sum of the side jamb dimensions and dimensions of space between panels in excess of the nominal Panel Width as shown in the Cross-Section Details.

Frame Height (FH) SL82 System

Higher Weather Performance Sill: Frame Height = Panel Height + 144 (5 11/16”) = Clear Opening Height + 194 (7 5/8”) Flush Sill / Low Profile Saddle Sill: Frame Height = Panel Height + 144 (5 11/16”) = Clear Opening Height + 169 (6 5/8”) Frame Widths for Different Configurations with Majority of Panels Folding to Right (and their Mirror Image Configurations with Majority of Panels Folding to Left). See Maximum Size Charts for size limits. These numbers can be used as a guideline only. Contact NanaWall for the exact calculations for a particular unit.

Please note that widths for units with angle turns will be different.

Model 1R Frame Width = 1 x Panel Width + 221 = 1 x Panel Width + 8 11/16”

Model 1L1R Frame Width = 2 x Panel Width + 212 = 2 x Panel Width + 8 3/8”






Model 2L2R Frame Width = 4 x Panel Width + 228 = 4 x Panel Width + 9”


Model 1L4R, Model 2L3R Frame Width = 5 x Panel Width + 275 = 5 x Panel Width + 10 15/16”




Model 3L4R, Model 2L5R, Model 1L6R Frame Width = 7 x Panel Width + 293 = 7 x Panel Width + 11 9/16”








8

INWARD OPENING SECTION DETAILS | SL82 All Cross Sectional Views Are Half Size

INTERIOREXTERIOR

INTERIOREXTERIOR

FR

AM

E H

EIG

HT

INTERIOREXTERIOR

FFH

Detail 1.0 Head Jamb

Detail 2.0Raised Sill (higher weather performance sill)

Detail 16.0 Intermediate Sill

Detail 26.0 Flush Sill

(No rating against wind driven rain)

(For ADA compliant height, use low profile saddle sill.)

INTERIOREXTERIOR

FFH

Detail 22.0 Low Profile Saddle Sill

(No rating against wind driven rain.)


9


Detail 5.0Panel with running carriage set meeting left side jamb

Detail 10R.0Meeting of swing panel with locking on right and folding panel with running carriage set on left

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

10


Detail 8.0Two swing panels with locking: right panel opening first

Detail 9.0Meeting of panels folding to opposite sides (no swing panel). Running carriage sets on both panels

Detail 3.0 Panel hinged at right side jamb

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR


11


Detail 7.0Folding panels with locking

Detail 4.0Swing panel with locking at left side jamb

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

Detail 7C.0Folding panels with running carriage set

INTERIOR

EXTERIOR


12

DESIGN WINDLOAD CHART | SL82

Inswing Unit with Raised Sill: with Negative Design Pressure

(Derived from Comparative Analysis) Test Unit Size: 3 panels 9'10" W x 8'6" H

Please note that some jurisdictions may limit the use of these charts or may not accept them at all. Design pressures and/or sizes may be restricted to what was tested.

Please note that chart is only applicable for units with referenced NanaWall supplied locking

Allo

wab

le D

esig

n W

ind

Load

ing

- PS

F

Panel Height

Uni

t Wid

th D

ivid

ed b

y N

umbe

r of

Pan

els

1’11”

2’3”

2’7”

2’11”

3’3”

3’7”

NegativeSL82

90

85

80

75

70

65

60

55

50

45

40

35

30

25 ”6’8 ”0’8 ”6’7 ”0’7 ”6’6 ”0’6

See Maximum Frame Size Chart for Possible Sizes

AL

LO

WA

BL

E D

ES

IGN

WIN

D L

OA

DIN

G -

PS

F

UN

IT W

IDT

H D

IVID

ED

BY

NU

MB

ER

OF

PA

NE

LS

PANEL HEIGHTSee Maximum Frame Size Chart for Possible Sizes


13

DESIGN WINDLOAD CHART | SL82

Inswing Unit with Raised Sill: Positive Design Pressure

(Derived from Comparative Analysis) Test Unit Size: 3 panels 9'10" W x 8'6" H

Please note that some jurisdictions may limit the use of these charts or may not accept them at all. Design pressures and/or sizes may be restricted to what was tested.

Please note that chart is only applicable for units with referenced NanaWall supplied locking.

Allo

wable

Des

ign

Win

d L

oadin

g -

PSF

Panel HeightU

nit

Wid

th D

ivid

ed b

y N

umber

of

Pane

ls

1’11”

2’3”

3’3”

2’11”

2’7”

PositiveSL82

70

65

60

55

50

45

40

35

30

25

20 ”6’8 ”0’8 ”6’7 ”0’7 ”6’6 ”0’6

See Maximum Frame Size Chart for Possible Sizes

AL

LO

WA

BL

E D

ES

IGN

WIN

D L

OA

DIN

G -

PSF

UN

IT W

IDT

H D

IVID

ED

BY

NU

MB

ER

OF

PA

NE

LS

PANEL HEIGHTSee Maximum Frame Size Chart for Possible Sizes


14

the structurally glazed folding system with exterior “all ... › sites › default › files ›...

Documents