the secure solution complex 200h alarm system …€¦ · the secure solution complex 200h alarm...
TRANSCRIPT
www.telenot.com
Security
guaranteed
System appr
oval
•
TELENOT • Device approval •
THE SECURE SOLUTIONCOMPLEX 200H ALARM SYSTEM CONTROL PANEL
Up to 16 door modules can be connected Up to 17 doors can be managed hilock 2200 digital lock cylinder can be integrated Comprehensive switching and smart home functionalities Day alarm functionality Beautifully designed housing with integrated touch control panel
Security
guaranteed
System appr
oval
•
TELENOT • Device approval •
2
CENTRALLY CONTROLLED –
THE CENTERPIECE - COMPLEX 200H.
The elegantly designed alarm system control panel complex 200H is the basis and centerpiece for your complete security – guaranteed – today and in future. The complex 200H offers protection
against fires against intrusion against unauthorized access against technical faults such as water or
gas leakage by emergency call by visual and audible alerting
particularly in private and small business
settings The complex 200H unifies all installation types
conventional cabling modern BUS technology wireless installation
The highest level of dependability and functionality is documented by the device and system approval numbers. This means that you and your clients are able to enjoy reliable security – guaranteed.
In existing buildings or rooms in which it is not possible to lay cables, use the wireless version. The advantage here is the low installation cost and the virtually waste-free installation.
Approval by VdS Schadenverhütung
Association of security companies in Austria
Swiss Association of installers
of security systems
3
TECHNICAL DETAILED INFORMATION –
COMPLEX 200H ALARM SYSTEM CONTROL PANEL.
Up to 63 detector bus subscribers can be connected to the complex 200H detector bus. 8 standard alarm points are available. The complex 200H also has a controller bus for up to 16 control panels. Up to 17 access control readers can be connected to integrate doors and gates. For further extension stages, the complex 400H hazard alarm control panel is available.
As an option, use the FGW 210 wireless gateway to expand the complex 200H to a wireless security system at any time. Up to 100 wireless components (max. 165 alarm points) and eight elegantly designed mobile control panels can be operated at the FGW 210 gateway. All components work bi-directionally. The wireless detectors are treated as if they are standard detectors or BUS detectors; this also applies on a cross-area basis. An enormous program of more than 1,500 peripheral components such as access control readers, motion detectors, touch control panels in various design variants, and technical detectors form the basis to appropriate and elegantly designed solutions.
A TELENOT supervised premises transceiver can be installed for remote alerting. Each individual message can be transmitted in plain text in a multitude of manners. If used in combination with the BuildSec alarm system app, the complex 200H alarm system can be operated by smartphone and tablet computer. In this way, you will receive all important status information on your smartphone. You are able to see where and at which precise position any intrusion or fire alarm has been triggered or water damage has occurred. Additionally, smart home functions are at your fingertips, enabling you to control doors, blinds, lighting, etc.
APPROVED INTRUDER ALARM SYSTEMS
complex 200H Intruder Alarm System TELENOT 5000 AApproval no. S 188704(class A)
Wireless Intruder Alarm System DSS2 AApproval no. S109705(class A)
complex 200HClass VSÖGS-N (Industry standard low)GS-N 091012/09 EP/S (Private standard)P 091012/09 E
Hazard Warning SystemGWA 5000 HomeApproval no. Y 112902(VdS-Home)
Digital cylinder
Transceiver SVT
comlock 410
Digital cylinder
hilock 203
GBS
MC
BSC
R1
R2
L3
Control panels… 63 Detectors max.
Detector bus 8 alarm points comlock
comlock reader
cryplock reader
com2BUS
Location panel LTE
AZS display system
3 Relay / 11 TA Outputs
Power supply signals from additional power supply
PC-Software
VdS-interface S2
Remote alarmRemote switchingRemote parameterization
TC network
Mobile phone
App for operation and for displaying operating states of the AS via TCP/IP with the aid of a SPT.
App for displaying detector lines and for operating remote switching relais via TCP/IP.
SMS, Speech
MBT 240
MBT 241
MS 232
comstar VAYO F215/225
comstar F215/225
FRM 282
FRM 285
FGW 210 wireless gateway
complex 200H
FGW 210 wireless gateway
integrated power supply for Akku 7 Ah
S1 (par.)
S1 (ser.)
SPT
com2BUS (IACP)
3 x external / 1 x internal warning devices
FTM 292AKG 233
MS 211MS 221
Wireless gateway built into the complex 200H IACP housing type S8/GR80orExternal wireless-gateway connected at the com2BUS
4
TECHNICAL DETAILED INFORMATION –
COMPLEX 200H ALARM SYSTEM CONTROL PANEL.
5
DEVICE FEATURES –
COMPLEX 200H ALARM SYSTEM CONTROL PANEL.
Device features complex 200H IACP
comlock 410 door module
Transceiver hilock 203 Total amount
Total max. 16 items (max. expansion)
Supervised premises
Detector zones
independent supervised premisesaccording to VdS regarding
comlock interface
Authorization code 1
Detector bus
Subscriber
com2BUS
Conventional alarm points ²
Outputs
Relay
TO +12 V switching ³
TO GND switching ³
S1 serial interface to the SPT
S1 parallel interface to the SPT
Wireless Gateway interface
hilock 2200 digital lock cylinder
Schnittstelle SimonsVoss Transceiver
App-capable (comvisMC IACP) when used with a SPT
Control panels BT 8xx / 4xx / SBT4xx
LTE 400 receiver boardAZS-11/-20 display system
Event memory
Long-term memory "Radio"
1
128
1
320
1
63
1
8
4
9
6
1
1
1
16
8
1365
1365
+ 1 (8)
+ 5 (40)
+ 1 (8)
+ 5 (40)
+ 1 (8)
+ 3 (48)
+ 1 (8)
1
128
17
320
1
63
1
88
19
89
6
1
1
1
16
16
16
8
1365
1365
1 The number of authorization code includes the code for the control panel and comlock-/cryplock reading units.2 The number of conventional alarm points includes detector connections, inputs for blocking locks, bolts etc.3 The number of outputs includes also the outputs for warning devices (OSG, ASG, ISG), coils, LED display, buzzer etc.
6
BEAUTIFUL TO OPERATE –
TOUCH-OPERATED CONTROL PANEL BT 800.
The elegantly designed complex 200H touch-operated control panel BT 800 is characterized by its modern design. All operating states are shown via the brilliant capacitive touch-operated panel with a glass plate.
The very highest quality criteria are fulfilled as confirmed by the approval in accordance with VdS class C, the highest security class (G 113069).
The intelligent and intuitive menu guarantees simple and convenient control of your alarm system and is always a pleasure to use. Integrated loudspeakers are used for audible acknowledgment of operating procedures and alarms. Client-specific settings can be created for six different color schemes on the display. The brightness can be controlled in ten steps. In addition, an energy-saving mode can be set.
You can choose between different languages for control operation. The BT 800 touch control panel can be also remotely installed away from the main control panel. For this scenario, choose from 15 different design frames: from carbon silver through to amber red. The control panel can be assembled in a property-specific manner in portrait or landscape, and as surface and recess variant. Comprehensive switching functions enable control of components used in building automation technology and smart-home functions. Change the screen page conveniently by swiping across the display.
7
CONTROLLED AND ALERTED BY CELLPHONE –
BUILDSEC ALARM SYSTEM APP.
The BuildSec alarm system app (for iOS and Android) gives you the option of operating your alarm system in the property via WLAN or remotely.
Your TELENOT alarm system protects you from meeting an intruder in your own house when you come home.
An encrypted transmission path between app and alarm system protects against manipulation: The app uses the ultra-secure 128-bit AES key (Advanced Encryption Standard) to guarantee absolutely secure data transmission. You can also receive all important status information remotely on your smartphone – regardless of whether you are currently out with friends, sitting in the theater, enjoying a meal in a restaurant, or traveling abroad.
You can see where in the building an intrusion or fire alarm has been triggered or water damage is occurring. You are thus in a position to take further immediate measures. The BuildSec alarm system app also offers comprehensive switching functions for smart-home applications. The "silent alerting" function in your TELENOT alarm system allows the alarm message to be forwarded via the telephone connection or the Internet connection to third parties. The alarm message can be transmitted to any telephone numbers, to your smartphone, or to your neighbors, friends or to a permanently manned emergency call and service control center. In this case, a plain text message containing a previously defined text is transmitted.
8
INCORRECT MOVEMENTS REGISTERED –
COMSTAR/COMSTAR PRO MOTION DETECTOR.
TELENOT comstar motion detectors are used to monitor interior rooms. Motion detectors must be positioned accor-ding to the size and number of rooms.
A selection of 16 design covers in a variety of colors is available for the comstar VAYO. Using this cover the detector can be adapted to the respective room design.
The design cover is applied to the comstar VAYO detector using a click system.
The range of the motion detectors is between 15 and 25 meters depending on type. The comstar detector uses optical mirrors to detect infrared heat radiation, such as that emitted by the human body. The optical mirrors divide the surveillance area into cone-shaped sectors. Human movement across a sector is detected. In this way, rooms and buildings can be reliably secured against intruders. comstar motion detectors from TELENOT operate using the specially developed TRAP signal processing. This ensures excellent protection against false alarms as well as outstanding detection characteristics. Alarm criteria can be distinguished effectively from interference signals. At the same time, power consumption is reduced to a minimum.
comstar pro motion detectors work according to the further-developed XTRAP technology. A procedure boasting further-improved characteristics in terms of protection against false alarms and detection. Simply plan the corresponding number of motion detectors for your bedroom, child's bedroom, work room, living room, kitchen, or halls. The comstar motion detector can also be connected wirelessly to the complex 200H alarm system control panel. In this way, existing buildings can easily be retrofitted with an alarm system. For new buildings, wired versions of the detectors in the same design are also available.
9
AWOKEN IN GOOD TIME –
SMOKE DETECTORS IN VARIOUS DESIGNS.
TELENOT smoke detectors in various designs let you sleep in peace while keeping you and your family safe.
For new buildings, wired versions of the detectors in the same design are also available.
Smoke detectors detect smoke that is emitted from smoldering or open fires. If smoke enters the measuring chamber, the detector sounds an early audible alarm in the assembly location (bedrooms, hall, etc.). The alarm message is also reported to the alarm system control panel. A smoke detector secures an area of around 60 square meters – at an assembly height of up to six meters. For critical zones such as the bathroom or kitchen, TELENOT recommends automatic thermal warning detectors.
The TELENOT thermal warning detector detects when a specific thermal limit value is exceeded and sounds an audible alarm at the assembly location (kitchen, bathrooms, etc.). The alarm message is also reported to the alarm system control panel. The HDv 3002 TS thermal warning detector secures an area of around 40 square meters – at an assembly height of up to six meters. The smoke or thermal detectors can also be connected wirelessly to the complex 200H alarm system control panel. In this way, existing buildings can easily be retrofitted with an alarm system.
10
VISUAL AND AUDIBLE WARNINGS –
EXTERNAL ALARMS VIA WARNING DEVICE.
The visual/audible external alarms are de-signed to deter intruders by means of loud audible as well as visual alarms.
The TELENOT visual / audible warning device has been awarded the Design Prize of the Federal State of Baden-Württemberg.
At the same time, neighbors and the general public are alerted to the break-in or a hazardous situation. A visual alarm also helps assistance personnel to find their way. If an intruder enters the building when the owner is absent, the warning device also prevents the owner from putting himself in immediate danger on his return. The warning device is installed on the outside of the building. It is connected by cable to a universal wireless module, which must be installed inside the building.
The universal wireless module requires a 230 volt supply and ensures reliable and secure operation of the external warning device – also during the winter months when temperatures can drop below zero degrees Celsius for several weeks at a time. For your safety and security, TELENOT has deliberately opted not to rely on a completely wireless installation, as it is not possible to guarantee that the external warning device will function reliably during the winter months without a 230 volt power supply. The OAS-R visual / audible warning device is connected wirelessly to the complex 200H alarm system control panel. For new buildings, wired versions of the warning devices in the same design are also available.
11
AUTHORIZED PERSONS MAY ENTER –
INTELLIGENT ACCESS CONTROL READERS.
Intelligent access control readers are designed to control access to a door, and to activate and deactivate your alarm system. Moreover, they prevent the property from being entered when the alarm system is activated.
The cryplock reader has already received numerous awards.
In addition to the color white, the cryplock access control reader is available in 14 other color variants.
Depending on the variant, the TELENOT access control reader can be operated by code entry and/or transponder chip. If a transponder chip is lost, simply teach in a new chip and block the old one. TELENOT offers a range of access control reader variants to choose from. One variant is the elegantly designed cryplock reader with a capacitive keypad beside the door and a blocking element and bolt switch contact in the door frame. The aesthetically pleasing flat housing of the cryplock access control reader can be integrated seamlessly into any building facade. The capacitive keypad, illuminated during operation, provides the impression of elegance and timelessness.
By not using any mechanical moving parts whatsoever, reliable functionality of the mechanical moving parts is guaranteed in all weather conditions, this particularly applies to the colder times of the year. Alternatively, the hilock 2200 digital lock cylinder is available. The mechanical work required to fit the hilock 2200 on the door is reduced to a minimum. It also allows for easy and convenient access as well as activation and deactivation of your complex 200H alarm system control panel by transponder chip. Code entry is not possible.
hilock 2200 digital lock cylinder
12
DETECTING GAS AND WATER FAULTS –
LITTLE WATCHDOGS AND LIFE-SAVERS.
Water detectorsprotect you from costly water damage. The water detector by TELENOT detects water ingress and rising water, for example, if a washing machine hose bursts, by means of four gold-plated electrodes.
The alarm message is transmitted to the complex 200H alarm system control panel and audibly indicated. If you are on vacation or away from the building, you also have the option of receiving the corresponding alarm message via an app on your smartphone. This allows you to avoid expensive and escalating damages because you can respond immediately. The water detector is simply installed on the floor. Depending on the specific conditions, it can be connected to your complex 200H alarm system control panel wirelessly or by cable.
Gas detectorsare used to monitor rooms in which systems and devices are operated using flammable gases such as propane, methane, and butane as well as city gas and natural gas.Two externally visible LEDs indicate the standby and alarm condition. If the permissible gas concentration is exceeded, an alarm is triggered. An audible warning is issued and a red LED on the gas detector lights up.
In addition, the alarm message is transmitted to the complex 200H alarm system control panel. Alarm forwarding to your smartphone is also available as an option. Depending on the specific conditions, the gas detector by TELENOT is connected wirelessly or by cable.
Temperature detectorsare used for monitoring the temperature in closed rooms. Two independent limit values can be set within the range from -30 to +50 degrees Celsius. Consequently, the detectors are equally suitable for monitoring cold storage rooms and wine cellars as they are for monitoring boiler rooms.
Ideal for vacation homes: When installed accordingly, they can also be used to link and activate heating systems remotely. If you are on vacation or away from the building, your complex 200H alarm system control panel gives you the option of receiving corresponding alarm messages on your smartphone, thus enabling you to respond immediately.
13
ALSO SECURE EXTERNALLY –
MAGNETIC CONTACTS FOR WINDOWS AND DOORS.
Magnetic contacts and glass-break detectors can already detect attempts at forced entry, smashing in or entering via windows and doors. They immediately forward the alarm message to the complex 200H alarm system control panel. For this purpose, each window must be fitted with a magnetic contact (lock monito-ring) and a glass-break detector (glass-break monitoring). If the window, for example, in the bedroom is to remain tilted when the alarm system is activated, two magnetic contacts are required. The installation of the magnetic contacts and the glass-break detector involves mechanical work. Securing the exterior surface of a building involves installing an elaborate security system and is used particularly for new buil-dings. In this case, only directly accessible windows and doors are individually secured.
The magnetic contacts in windows and doors are connected wirelessly to the complex 200H alarm system control panel. This means that existing buildings can also be retrofitted without difficulty. For new buildings, wired versions of the contacts in the same design are also available.
2
1
2
1
IR Motion detector Wireless smoke detector
Wireless gateway
Detector transmitter
Wireless gateway
OAS-R war-ning device
DSS2 OAS-R Wireless alarm device set
IACPcomplex 200H/400H
comstar F225comstar F215
comstar VAYO F225comstar VAYO F215
FGW 210
FGW 210
multifunc-tional Input
MS 232
Mobile control panels
MBT 240MBT 241
Digital cylinder
Magnetic contact
cryplock reader
Bolt switch contact
Transceiver SVT
Door strike
Blocking elementor Blocking lock
Integr. MC
Integr. MC
FGW 210 installed in IACP (housing typ S8/10) orFGW 210 housing typ GR 10 external connected to com2BUS
230 V~
230 V~
230 V~
Wireless thermal detector
Integr. MC
Integr. MC
multifunc-tional Input
AKG 233
MS 211MS 221
Acoustic glass-break detector
FTM 292
com2BUS
Wireless door module set DSS2 cryplock R/K-MD
14
COMPLEX 200H ALARM SYSTEM CONTROL PANEL:
WIRELESS TECHNOLOGY –
REAL SECURITY – GUARANTEED.
Enjoy wireless alarm technology that has earned the right to protect your clients. This is evidenced in the wireless technology approvals. All relevant products are approved by ‘VdS Schadenverhütung’ (German Association for Damage Prevention), ‘VSÖ Verband der Sicherheitsunternehmen Österreichs’ (Association of Austrian Security Companies), and ‘SES Verband Schweizerischer Errichter von Sicherheitsanlagen’ (Association of Swiss Security System Manufacturers) and bear a device approval number to show this. A chain is only as strong as its weakest link. For this reason, the individual TELENOT system components are arranged in security systems optimally coordinated with one
The TELENOT wireless technology is recognized compliant with:
VdS System approval Wireless Intruder Alarm System DSS2 AApproval no. S109705(VdS class A)
Hazard Warning SystemGWA 5000 HomeApproval no. Y 112902(VdS-Home)
complex 200HClass VSÖGS-N (low commercial status)GS-N 091012/09 EP/S (Private standard)P 091012/09 E
another. Depending on the security and hazard class, this is documented in the form of a system number. The device and system approval number mean that you and your clients are able to enjoy reliable security – guaranteed. VdS is a company of the German Insurance Association (GDV) and is tasked with the protection of life and property. VdS, VSÖ, and SES are all official bodies for inspecting and approving security products.
15
Highly practical – service tools for planning, installation, and maintenanceThe DSS2 wireless technology enjoys excellent project planning tools and service tools that the expert company can use simply with the compasX parameterization software.
In project planning mode, the technician can read the connection quality from each component via LED.This ensures that the location of each component can be calculated simply and chosen optimally by one person only. In practice, this saves time and money.A real one-person inspection is also guaranteed as part of maintenance.
Transmission frequency of each component is displayed
Battery capacity for each component is displayed
Initial voltage remains defined when a new battery pack is installed
Factory coding of each individual component; code stock of over 16 million (each component is unique)
Choosing operation modesDepending on client or insurance-related specifications, the operator can choose between two operation modes:
VdS class A VdS class Home energy saving client-specific
12 working channels with a wide bandwidth ensure maximum wireless stabilityThe DSS2 new wireless technology works with mcrt® multi channel-receiving technology. The ideally suited ISM band (Industrial Science Medicine) is used for wireless transmission at 433.05 – 434.90 MHz. In this frequency range, TELENOT works with a specifically defined, optimally designed channel arrangement with 12 working channels. The DSS2 works always on 3 of 12 working channels that are arranged in such a way that there is optimum distribution on the frequency band. Interference by external influences is thus avoided to as great an extent as possible. If all 3 current working channels are experiencing interference, the system automatically switches to the next available group of three channels.
In total, 4x3 channels are available that are optimally physically arranged. This channel arrangement use means that maximum wireless stability is guaranteed. The RSSI field strength indicator permanently monitors the 12 working channels. Highest operating convenience on all control panelsThe system can be set and operated at the control panels at all times; this takes place immediately with a plain text display. Any state change is recognized immediately. Professional energy management for a long battery lifetimeBattery lifetime is between 1.5 and 3 years depending on the operation mode. Quality and dependability is further increased by the fact that TELENOT ensures optimum contact with the components – thanks to a battery pack with pre-assembled socket.
Article numbers complex 200H in the GR80 housing type
Art. No. 100075950Housing door, traffic whiteHousing door, white aluminum
complex 200H in the GR80 housing typewith control panel BT 800Art. No. 100075951Housing door, traffic whiteHousing door, white aluminum
complex 200H in the S8 housing typeArt. No. 100075943 in traffic white
complex 200H in the S8 housing typewith control panel BT 820Art. No. 100075944 in traffic white
Additional information about our comprehensive range of electronic security technology and alarm systems can be found in our latest product catalog or on our website at www.telenot.com
www.telenot.com
TELENOT security technology.Protective. Attractive. Secure.
Contact Germany:
TELENOT ELECTRONIC GMBH
Wiesentalstraße 4273434 AalenGernany
Telephone: +49 7361 946-4990Fax: +49 7361 946-440
Contact Austria:
TELENOT ELECTRONICVertriebs-Ges.m.b.H.
Josef-Haas-Straße 34655 VorchdorfAustria
Telefon: +43 7614 8258-0Telefax: +43 7614 8258-11
Contact Switzerland:
Telenot Electronic AG
Neumühlestrasse 428406 WinterthurSwitzerland
Telefon +41 52 544 17 24 Telefax +41 52 544 17 25
You have questions or want more information? Contact us.
Certified according to DIN EN ISO 9001 / No. S 897069
1100
6118
2-(1
5)
Swiss Association of installers of security systems
Approval by VdS Schaden- verhütung
Association of security companies in Austria