the ring peel induction seal liners. - selpac europe · replace the cap to reseal. if you have any...
TRANSCRIPT
The Ring Peel Induction Seal Liners.
Presented by Eric Warburton
Topics• Designs available.
• Printing options.
• Processing & Sealing methods.
• Closure design.
• Features & Benefits.
• Target markets.
• Manufacturing plant.
• Manufacturing Qualifications.
• Advertorial.
Ring Peel Designs
Increased Printing area for Logo or message.
Printing with punch Registration mark and Directional arrow.
Processing & Sealing.
Pre-cut discs (currently only available bulk packed).
Roll form with printed registration marks for punching.
Conventional induction method with liner inside closures.
Direct induction with liner punched from tape.
Closure Designs
Design not functional with a flat or concaved top.
Recommended design, internal recess or convex top.
Ring Peel Video
• We have a low quality video to enable email transmission embedded in our website, please contact our office should you require a higher quality version.
Features & Benefits• Customer / End User• Safety & Convenience
• Tamper evident
• Easy removal
• Easy access of contents
• Leaves a foam ring welded to the rim of the container for resealing
• Reseal pack with cap if contents are not single use
• Added value
• Brand awareness
• Processing• Single piece structure
• No need for separate reseal element
• Supplied in Disc or Roll form
• No glue required
• Structure available for Retort or Hot fill applications
Target Markets
• Convenience foods, snacks.
• Single serve foods.
• Dry contents - coffee, spices, tablets.
• Liquids – drinks, medicines, chemicals, oils.
• Foods – spreads, hot fill, pasteurisation, retort.
• Cosmetics – creams, gels, wipes.
• Pet foods.
• Can replacement opportunities in all markets.
Manufacturing Plant
Manufacturing Qualifications
Metal Can – Ring Pull vs Plastic Container – Ring Peel.
The New Consumer friendly Ring Peel Seal from SelPac.
Ring Pull – break a nail or use a knife. Ring Peel – grip and rip!
Remove the Ring Peel. Replace the cap to reseal.
If you have any questions please contact the SelPac European office: +44 (0)1925 752600.