The optimal design for laboratory extractors

With its optimal design, the Ø 3” MOVEX ME has a very low pressure drop, which gives many valuable benefits.

- Low pressure drop always saves energy.

- Ventilation noise is reduced.

- Lower pressure drop is achieved without selecting a larger diameter extractor.

- Lower pressure drop will allow the ME to be integrated into extractor systems together with other extraction devices.

The unique design and stable mounting brackets will make the MOVEX ME your best choise for lab environments.

Support for designing an efficient facility is available on page 4 or at www.movexinc.com.

For additional information, please contact MOVEX.

The Movex range also includes fans, accessories, automatic control gear and filters for local extraction

L O C A L E X T R A C T O RPure advantages

100

The lowest possible pressure drop is a quality aspect that should always be considered.With its uniquely designed joint construction, MOVEX ME combines maximum flexibility with low pressure drop. Because the air passes through the joints without creating unnecessary turbulence, the variation in pressure drop between an extractor in a working position and a fully retracted extractor is minimal.

The low pressure drop of MOVEX ME gives several advantages:- Low pressure drop always saves energy.- Ventilation noise is reduced.- Lower pressure drop is achieved without selecting a larger diameter extractor.- Lower pressure drop will allow the ME to be integrated into extractor systems together with other extraction devices.

Always choose low pressure drop

All MOVEX laboratory local extractors have as standard a full swivel that allows 360º of rotation without special sleeves or double wall brackets. Both ceiling- and wall brackets consist of square-shaped anodised aluminum that provides a proper and stylish installation. Moreover, the ceiling bracket functions as a duct, thus avoiding the need for expensive external ducting and additional holes through false ceilings. The installation is simple and stable. The ceiling bracket is available in eight standard lengths, from 10 to 80 inches.

Appealing stable brackets

As standard, the ME will have an internal spring located in the first articulating joint to support the weight of the arm. For arms 80” in lenght, the ME will be equipped with an external gas spring to support the weight of the arm and allow for better stability and flexibility.

Gas spring supports the weight of the extractor

Static pressure drop is measured in accordance with ISO standard 5167-1. The noise level is measured in accordance with ISO standard 3743.

Stati

c pr

essu

re d

rop

in/w

g

Airflow l/s

Airflow cfm40 50 60 70 80 90

20 30 40 50

110

60

120

1”

2”

130 140

3 joints

7 7/8

7 1/16

Ø 4”

L

4

4 3/16

Several configurations to meet customers needs

StandardJoints in polypropylene and tubes in aluminum, fit most lab environments.

PPJoints and tubes in polypropy-lene, used in environments with aggressive contaminants.

ATEXJoints and tubes in conductive polypropylene, used for extraction of contaminants in explosive environments. In compliance with ATEX directive 94/9/EC.

ESDJoints in conductive polypropy-lene and tubes in aluminum. I.E. used in the electronics industry, for example. Certified according to EN 61340-5-1.

9

Ø 3

”

Ø 3”

5

Ø 1

4

12 1/2

Ø 1

0

Ø 3”

3

11

Ø 3”

15 3/4

14

12

12 64

88 3/4

Ø 3”

9 3/

16

Ø 3 7/8

A

Ø C

9 3/

163

1/8

A

Ø C

Ø 3 7/8

Hoods

Brackets

Models

Model 2000 with gas spring

Designation Dimensions (inch) WeightStandard PP ESD ATEX A B Ø C lbMET 1000-75 PP ES EX 16 12 3 5MET 1300-75 PP ES EX 22 18 3 5.7MET 1500-75 PP ES EX 30 18 3 6MET 2000-75 PP ES EX 40 26 3 7.1

SUCTION NOZZLEMS 300-75 (PP, ES)

METAL HOODStandardMM 250-75 (ES, EXD)With working lightMMB 250-75

DOME HOODMK 350-75 (PP,ES,EX)

SQUARE HOODMSH 350-75 (PP)

FLAT SCREEN HOODMPH 300-75 (PP, ES, EX)

The ceiling bracket can be fitted with sleeves both below and above a false ceiling; in the latter case preferably together with MTI CT. MTI can be supplied in lengths over 80” upon request. For aggressive environments, we recommend the MTI ceiling bracket, supplied with an internal epoxy coating.

Ceiling bracket MTI

Designation for model 75 Dimensions (inch) Weight

Standard ESD ATEX L lb

MTI 250 ES EX 16 7MTI 500 ES EX 20 8MTI 1000 ES EX 40 12MTI 1250 ES EX 50 13MTI 1500 ES EX 60 14MTI 1750 ES EX 70 15MTI 2000 ES EX 80 17

Designation for model 75 Weight

Standard ESD ATEX lb

MVK ES EX 5

Wall bracket

MVKMTI

MTI CT 4 1/8

2 9/168 5/8

Ø3 7/8

Ø3/8 (4X)4 3/4

3 3/4

7 7/

86

7/8

All brackets have Ø 4” duct connections.

BB

Table mountingCeleing mounting

Designation Dimensions (inch) WeightStandard PP ESD ATEX A B Ø C lbMEB 1000-75 PP ES EX 16 12 3 5MEB 1300-75 PP ES EX 22 18 3 5.7MEB 1500-75 PP ES EX 30 18 3 6

Working radiusMaximum radius

S

80”

MET

200

0

MET

150

0

MET

130

0

MET

100

0

MET 2000MET 1500MET 1300MET 1000

MET 2000 MET 1500 MET 1300 MET 1000

35”

20” 40” 60”

31”

H

20110124

104 Commerce Drive, Suit C, Northampton, PA 18067, USATel: 610-440-0478 Fax: 610-440-0480

www.movexinc.com e-mail: info@movexinc.com

Reach at recommended installation height

Technical aids at our website www.movexinc.com

Material description Delivery

Function Airflow

Laboratories 40 l/s 88 cfmSchools – Science classrooms 40 l/s 88 cfm

Recommended installation height

Designation H inch

MET 1000 67-78MET 1300 75-86MET 1500 78-91MET 2000 86-98

Recommended side displacementin relation to the work area

Designation S inch

MET 1000 12-24MET 1300 16-28MET 1500 20-32MET 2000 28-40

Recommended values

The following installation heights and lateral placements in relation to the work space are recommended for optimised extraction.

MOVEX recommends both the best positions and airflows for our extractors. Good technical support is available at our website to help you choose the right product.The support consists of CAD drawings in both 2D and 3D, specifications and a configurator that helps choosing the optimal extractor positioning.

Contact your nearest MOVEX distributor for a password.

Ceiling - Supplied assembled excluding hood or nozzle. MTI or MTF ceiling bracket ordered separately. Wall - assembled, complete with MVK wall bracket, excluding hood or nozzle.

Table - assembled, with mounting plate for table mounting, excluding hood or nozzle. Flexible table bracket MBF ordered separately.

Friction jointsBall-bearing-equipped adjustable friction joints in polypropylene (PP) with guide ring of low-friction treated rubber.Support springs and other component parts in zinc-plated steel or stainless steel.

TubesMade from thin-wall anodised aluminum, alternatively from polypropylene. Air-tight damper supplied as standard.

80”20” 40” 60”