the new adventurer pro is here!. what’s new? bright alphanumeric dual line display better weighing...

The New Adventurer Pro Is Here!

• What’s New?

• Bright alphanumeric dual line display

• Better weighing cell and weighing performance

• 7 application modes

• Better Look!

The Ohaus Adventurer Pro

• Introducing the Adventurer Pro Precision Balance:

• 7 Models From 51g x.001g to 8100g x 0.1g

• NTEP Approved Models Available (release date TBD)

• 7 Application Modes

• Standard internal RS232 Port

• 2nd RS232 Port Factory Option

• Density/Specific Gravity Determination with Below Balance Hook

• Battery with Auto Shut-off or AC Power (Power Pack Included)

• Built-In GMP/GLP capability

• Integral Security Bracket

• In-Use Cover Included!


Adventurer Pro

Vs.

Competition


Adventurer Pro 2003 LP

A&DEK-G-C/H-C 2002 LP

MTPL Series 2003 LP

SARTORIUS

BasicLite 2003 LP

0.001 gAV53

51g x 0.001g $755BL150S

150g x 0.001g $1,070BL150

150g x 0.01g $640AV212

210g x 0.01g $645EK-200G-C

200g x 0.01g $645PL202-S

210g x 0.01g $705

BL310

310g x 0.01g $770AV412

410g x 0.01g $725EK-400H-C

400g x 0.01g $860

EK-600H-C

600g x 0.01g $970BL610

610g x 0.01g $1,015AV812

810g x 0.01g $835BL1500S

1500g x 0.01g $1,320PL601-S

610g x 0.1g $635BL600

600g x 0.1g $610PL1501-S

1510g x 0.1g $735BL1500

1500g x 0.1g $710AV2101

2100g x 0.1g $645EK-2000G-C2000g x 0.1g $725

BL31003100g x 0.1g $915

AV41014100g x 0.1g $725

EK-4000H-C4000g x 0.1g $965

EK-6000H-C6000g x 0.1g $1,115

BL61006100g x 0.1g $1,320

AV81018100g x 0.1g $835

0.01 g

0.1 g

• What’s New?

• Better Look!


What’s New?

• More Models --

• New 51g X 0.001g model

• New 210g, 410g, 810g X 0.01g models

• New 2100g, 8100g X 0.1g models

• More Application Modes --

• New Percentage Mode -- Shows sample as % of reference weight

• New Totalization Mode -- Allows summation of sample weights

• New Display Hold Mode -- Holds last stable weight on display after sample is removed

• New Check Weighing Mode – Verifies a predetermined weight within prescribed limits

• New Animal Weighing Mode – Compensates dynamic effects from the load to provide a stable indication


• What’s New?

• More Weighing Units --

• Baht, Tola, User Programmable Custom Unit

• In-Use Cover Included with Each Balance


mg, g, kg, oz, lb, ct, dwt, oz t, GN, N, Taels(3), Momme, Tical, Baht, Marshal, Tola, Custom

• What’s New?

• RS232 Communication Port is Now Standard –

• Secondary RS232 interface is a new factory installed option that allows connection to multiple peripherals expanding versatility

• GLP/GMP Data Is Built in –

• Complete GLP/GMP capabilities include date, time, balance ID, user ID, project ID and reference


• What’s New?

• Easy To View Backlit Display –

• 2-line alphanumeric LCD with text prompts

• Brilliant backlight

• Display allows simultaneous viewing of reference and actual weight.


• What’s New?

• Batteries for Portability --

• 4 “AA” Batteries for portable power

• Leveling Feet --

• For quick set-up, 4-corner leveling feet system is standard on all Adventurer Pro’s

AC or Batteries


Leveling Feet

• What’s Else?

• Integrated Security Bracket --

• Adventurer Pro has an integral security bracket as standard equipment

• Integral Weigh-Below Hook --

• Adventurer Pro has a built-in weigh-below hook which cannot be lost

Weigh-Below Hook


Security Lock

• What’s New? Recap

• Better Look

• Models -- More New Models

• Applications -- More Applications

• Units -- More Weighing Units

• RS232 Terminal is Standard, 2nd Terminal is a Factory Option

• Display – Brilliant Backlit LCD / 2-Line Alphanumeric LCD

• Battery -- Better Battery Performance

• Standard In-use Cover

• GMP/GLP Output

• Integral Weigh-Below Hook


• Enhanced Mode : Parts Counting

• APW Enhancement --

• The Adventurer Pro allows the user to turn-on automatic recalculation of the average piece weight (APW Optimization) -- this is the same function as found in Trooper Count and Ranger Count

• Without Optimization, the APW is the average of the weight of the sample, divided by the number of pieces in the sample -- if the user needs a sample of 100, they have to count by hand 100 pieces!

• With Optimization, the APW is the average of the weight of the initial sample as well as any subsequent samples -- the user can reach a sample of 100 by adding parts on the pan 10 at a time, increasing accuracy!


• Enhanced Mode : Parts Counting

• APW Enhancement --

• APW Enhancement is turned-on in the MODE-COUNT Menu by setting “APWOPT” to on

• The Adventurer Pro will recalculate the APW as long as two criteria are met:

• The weight of the new sample is less than or equal to the weight currently on the pan -- if it is more, the Adventurer Pro will not perform an APW recalculation

• The weight and platform are stable

• Sample Sizes --

• The Adventurer Pro allows the user to change the sample size with a press of the Print/Unit button


• Enhanced Mode: Parts Counting

• This mode is enabled by turning-on “COUNT" in the MODE Menu

• To use mode:

• Press and hold Function button until “COUNT” is displayed on line 2 of LCD

• Display will then flash “CLEAR APW?”• Press No button to use stored APW and begin parts counting• Press Yes button to establish a new APW

• Balance will display weight and flash “PLACE 10”• To select a different sample size, press No button• Place specified pieces on pan and press Function button to accept• Balance will calculate APW, then display total pieces and total weight

• To view APW, press Function button (APW will momentarily appear on line 2 of LCD)

• To reset APW, press and hold Function button until “COUNT” is displayed again


• New Mode: Percentage Weighing

• This mode allows the user to display the weight of a sample as a percentage of a reference weight

• The reference weight is placed on the pan first, and equals 100%

• Each reference weight will be a percentage from 1% to x%, depending on the Capacity X Readability of the scale -- most users will use 1% to 200% at the most

• Applications: Formulation and compounding, weight checking



• New Mode: Percentage Weighing

• This mode is enabled by turning-on “PERCENT” in the MODE Menu

• To use mode:

• Press and hold Function button until “PERCENT” is displayed on line 2 of LCD

• Display will then flash “CLEAR REF?”• Press No button to use stored reference and begin percentage weighing• Press Yes button to establish a new 100% reference

• Balance will display weight and alternate between “PERCENT” & “PUT SAMPLE”

• Place reference weight on pan and press Function button to accept• Balance will calculate and display 100% and total weight

• To view 100% reference weight, press Function button (reference weight will momentarily appear on line 2 of LCD)

• To reset 100%, press and hold Function button until “PERCENT” is displayed again


• New Mode: Check Weighing

• This mode allows the user to check the weight of a sample against a preset target

• Under and Over values are entered manually

• The display automatically displays “UndEr”, “ACCEPt”, “OVEr” and total weight of sample

• Applications: Quality control, weight checking


• New Mode: Check Weighing

• This mode is enabled by turning-on “CHECKWEIGH” in the MODE Menu

• To use mode:

• Press and hold Function button until “CHECKWEIGH” is displayed on line 2 of LCD

• Display will then alternate between “CHECKWEIGH” and EDIT REF?”• Press No button to use stored values and begin check weighing• Press Yes button to establish a new “UndEr” value

• Use No button to change flashing digit• Use Yes button to accept and advance to next digit• Use Yes button accept entered value (flashing)

• Press Yes button to establish a new “OVEr” value• Use No button to change flashing digit• Use Yes button to accept and advance to next digit• Use Yes button accept entered value (flashing)

• To reset values, press and hold Function button until “CHECKWEIGH” is displayed again


• New Mode: Animal (Dynamic) Weighing

• This mode allows the user to weigh small animals and filters out animal movements

• This mode provides the user with 3 operating modes: Automatic, Semi-Automatic and Manual.

• This mode provides the user with 3 filter levels: 5, 10 & 15 seconds

• Animal/Dynamic weighing can work with most weighing units

• The Adventurer Pro will display the filtered value on line 1 of LCD and alternate between “ANIMAL” and “HOLD” on line 2 of LCD

• Applications: Vibration filtering, research, drug testing



• This mode is enabled by turning-on “ANIMAL” in the MODE Menu

• Either manual, semi-automatic or automatic modes can be selected by setting “AnIMAL” to “MANUAL”, “SEMI” or “AUTO”

• Filter levels can be selected by setting “LEVEL” to “SET 5 SEC”, “SET 10 SEC” or “SET 15 SEC”

• To use mode (set to “MANUAL”):

• Press and hold Function button until “ANIMAL” is displayed on line 2 of LCD

• Display will alternate between “ANIMAL” and “READY”

• Place animal on the pan and press Function button take a measurement

• Balance will display filtered value on line 1 and alternate between “ANIMAL” and “HOLD” on line 2 of LCD

• Remove load from pan and press Function button to clear filtered value



• To use mode (set to “SEMI”):



• Place animal on the pan

• Balance will automatically begin measurement


• Remove load from pan and press Function button to clear filtered value



• To use mode (set to “AUTO”):



• Place animal on the pan

• Balance will automatically begin measurement


• Remove load from pan• Balance will automatically clear filtered value

• New Mode: Totalization

• This mode allows the user to sum a series of weights -- up to the limit of the display

• Weights can be added (totalized) either manually or automatically

• Totalization can work with most weighing units

• Once you are in Totalization, you can change weighing units without exiting Totalization

• The Adventurer Pro will show the current weight on the pan on line 1 of the LCD and alternate between “TOTALIZE” and totalized weight on line 2 of LCD

• Applications: Formulation and compounding, parts kitting

ΣTotalization


ΣTotalization



• This mode is enabled by turning-on “TOTALIZE” in the MODE Menu

• Either manual or automatic totalization can be selected by setting “tOtAL” to “AUTO” or “MANUAL”


• Press and hold Function button until “TOTALIZE” is displayed on line 2 of LCD

• Display will alternate between “TOTALIZE” and zero weight (no measurement stored to memory)

• Place a weight on the pan and allow balance to stabilize• Press Function button to add the weight to the total• Remove weight from pan and continue as desired or until display limits are

exceeded• To change weighing unit, press and hold Unit button• To clear total, press and hold Function button until “TOTALIZE” is displayed

again

ΣTotalization




• Press and hold Function button until “TOTALIZE” is displayed on line 2 of LCD

• Display will alternate between “TOTALIZE” and zero weight (no measurement stored to memory)

• Place a weight on the pan• Upon stabilization, weight will flash and be automatically added to the total• Remove weight from pan and continue as desired or until display limits are

exceeded• To change weighing unit, press and hold Unit button• To clear total, press and hold Function button until “TOTALIZE” is displayed

again

• New Mode: Display Hold

• This mode allows the user to hold the highest stable weight on the display until cleared

• The mode provides the user with 3 operating modes: Automatic, Semi-Automatic and Manual.

• Display Hold can work with most weighing units

• The Adventurer Pro will display the current hold value on line 1 of LCD and “HOLD” on line 2 of LCD

• Applications: Postal and shipping

0.00Display Hold



• This mode is enabled by turning-on “HOLD” in the MODE Menu

• Either manual, semi-automatic or automatic modes can be selected by setting “HoLd” to “MANUAL”, “SEMI” or “AUTO”


• Press and hold Function button until “HOLD” is displayed on line 2 of LCD

• Display will then flash “READY”

• Place a load on the pan and press Function button take a measurement

• Balance will display hold value on line 1 and “HOLD” on line 2 of LCD• Remove load from pan and press Function button to clear hold value

0.00Display Hold


0.00Display Hold



• To use mode (set to “SEMI”):



• Place a load on the pan

• Balance will automatically take a measurement and display hold value on line 1 and “HOLD” on line 2 of LCD

• Remove load from pan and press Function button to clear hold value




• Place a load on the pan

• Balance will automatically take a measurement and display hold value on line 1 and “HOLD” on line 2 of LCD

• Remove load from pan balance automatically clears hold value

• Mode Recap:

•New Check Weighing Mode

•New Animal Weighing Mode

•New Percentage Mode

•New Totalization Mode

•New Display Hold Mode

•Parts Counting Enhanced

0.00Display Hold

ΣTotalization


the new adventurer pro is here!. what’s new? bright alphanumeric dual line display better weighing...

Documents

new adventurer pro

ohaus adventurer pro

whats new

g models new

g model new

new factory

new check

new models applications