NATIONAL COUNCIL FOR LAW REPORTING

LIBRARY

THE KENYA GAZETTE Published by Authority of the Republic of Kenya

(Registered as a Newspaper at the G.P.O.)

Vol. CXXIII—No. 26

NAIROBI, 5th February, 2021 Price Sh. 60

CONTENTS GAZETTE NOTICES GAZETTE NOTICES — (Contd.)

PAGE

The Roads Act—Appointment, etc 414 The Competition Act—Authorizations 471-472

Taskforce on Reform and Re-Engineering of the Kenya The Co-operative Societies Act—Liquidation/Cancellation Utalii College 414-415 Order, etc 472-473

The Land. Registration Act —Issue of Provisional

Certificates, etc 415-428 The Physical and Land Use Planning Act—Completion of

Part Development Plans, etc 473-474 The Civil Aviation Act—Decisions on the Kenya Civil

Aviation Authority on Applications for Air Service The Environmental Management and Co-ordination Act—

Licences 428-431 Environmental Impact Assessment Study Reports 474-476

The East African Community Customs Management Disposal of Uncollected Goods 476

Act—Appointment and Limits of Transit Shed, Customs Loss of Share Certificate 477

Areas, etc 431-432

Change of Names 477-478 Customs and Border Control Department—Goods to be

Sold at Customs Warehouse, Forodha, JKIA, etc 432-456

County Governments Notices 456-457 SUPPLEMENT No. 8

The Standards Act—Declaration of Kenya Standards 457-470 National Assembly Bills, 2021

PAGE The Companies Act—Intended Dissolution, etc 470-471 The Health Laws(Amendment) Bill, 2021 5

The Transfer of Businesses Act—Business Transfer 471

[413

5th February, 2021 THE KENYA GAZETTE 457

1.1 Overview of West Pokot County Public Service Board

Achievements

In submitting this report, the Board recognises its primary obligation to promote the values and principles referred to in Articles 10 and 232 of the Constitution of Kenya, 2010. The report will highlight on the achievements realised, the challenges and recommendations on how best they can be addressed.

The report is submitted in fulfilment of section 59 (6) of the County Government Act, 2012, which requires that the report be published in the County Gazette.

2.0 Recruitment, Selection and Appointment of Staff

(a) The County Public Service Board recruited a total of eighty five (85) interns, sixty (60) interns to work under department of Health and Sanitation in conjunction with the Special Committee constituted by the Governor and forwarded to the Ministry of Health to serve under Universal Health Coverage (UHC) for further action and twenty five (25) interns to work under the Office of First Lady for the Skills Improvement Programme.

(b) The Board recruited a total of one hundred and eighty one (181) staff to work on both permanent and pensionable terms and contract terms.

Gender Total No. Percentage %

Male 90 49.7 Female 91 503

3.0 Promotions

In the month of December 2020, the West Pokot County Public Service Board promoted a total of one hundred and sixteen (116) health workers with effect from 1st January, 2021.

4.0 Renewal of Contract

(a) In the month of June 2020, the West Pokot County Public Service Board renewed contract of thirteen (13) staff working in the Department of Finance, Public Service Management and Health for a period of four (4) years.

(b) In the month of August 2020, the West Pokot County Public Service Board renewed the contract of thirty six (36) staff working in the Department of Agriculture and Irrigation for a period of three (3) years.

(c) The Board renewed the contracts of eighteen (18) Early Childhood Development Education (ECDE) teachers for a period of three (3) years with effect from 1st September, 2020.

(d) The Board renewed contract of County Secretary and for Chief Officers for two (2) years with effect from 7th December, 2020.

5.0 Confirmation of Staff

The Board confirmed a total of thirteen (13) County staff who were serving under probationary terms of service into permanent and pensionable in the month of September 2020.

6.0 Values and Principles of Public Service

(a) The County Public Service Board prepared the Annual Report to be submitted to County Assembly in fulfilment of section 59 (5) (a) of the County Governments Act as per the Constitution of Kenya, 2010.

(b) The Board submitted the report on ethnic audit of a total of two thousand six hundred and eighty three (2683) County staff to National Cohesion and Integration Commission pursuant to Articles 10 and 232 of the Constitution of Kenya, 2010.

7.0 Challenges

The Board has noted the following challenges in the course of their duties.

(a) Inadequate financial allocation.

(b) The Board has inadequate office space.

(c) Inadequate funds for training.

8.0 Recommendations

(a) Provision of adequate resources and funding.

(b) Development of relevant policies and regulations that comply with Constitution requirements.

(c) Periodic monitoring and evaluation of employees to ensure effective and efficient service delivery.

(d) Increased public awareness and understanding of principles and values in public service delivery.

(e) Enhanced networking and sharing good practices on governance in the public service.

(f) Increased prompt visits to and spot checks County departmental offices. This should be conducted on a regular basis preferably two times in every quarter.

9.0 Conclusion

The Board carried out its mandate as stipulated in the County Government Act section 59, which included Recruitment and Selection, Discipline and Promotion of Values and Principles in the County Public Service.

Dated the 15th January, 2021. IRENE K. MB1TO,

Ag. Secretary/CEO,

MR/1729363

West Pokot County Public Service Board.

GAZETTE NOTICE NO. 1060

THE LAMU COUNTY VALUATION AND RATING ACT, 2015

COUNTY GOVERNMENT OF LAMU

APPROVED VALUATION ROLL, 2016

PURSUANT to the provisions of section 12 of the Lamu County Valuation and Rating Act, 2015, take notice that the above-mentioned Roll was approved by the County Assembly of Lamu on 10th May, 2017 and is now available for public inspection at the County Headquarters in Mokowe during normal working hours from Monday to Friday.

Dated the 21st January, 2021. SAID BWANAMKUU,

MR/1702643 Chief Officer, Lands.

GAZETTE NOTICE No. 1061

THE STANDARDS ACT

(Cap. 496)

DECLARATION OF KENYA STANDARDS

PURSUANT to section 9 (1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the Schedule hereto to be Kenya Standards, with effect from the date of publication of this notice.

Number Title of Specification or Code of Practice

Chemical and Environment

KS 2891:2021 Kenya Standard — Grease proof/grease resistance, paper in direct contact with food containing grease and oil — Specification, First Edition

KS 2892:2021

Kenya Standard — Machine finished Kraft paper for packaging dry foods — Specification, First Edition

KS 2893:2021

Kenya Standard — Machine glazed Kraft paper for food packaging — Specification, First Edition

KS 2894:2021

Kenya Standard — Machine glazed Kraft paper for packaging of dry foods — Specification, First Edition

458 THE KENYA GAZETTE 5th February, 2021

KS ISO 1514:2016 Kenya Standard — Paints and varnishes —Standard panels for testing, First Edition

KS ISO 1518-1:2019 Kenya Standard — Paints and varnishes —Determination of scratch resistance — Part 1: Constant-loading method, Second Edition

KS ISO 3251:2019 Kenya Standard -- Paints, varnishes and plastics — Determination of non-volatile-matter content, First Edition

KS ISO 3270:1984 Kenya Standard — Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing, First Edition

KS ISO 3856-6:1984 Kenya Standard — Paints and varnishes —Determination of "soluble" metal content —Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method, First Edition

KS ISO 4628-10:2016 Kenya Standard — Paints and varnishes —Evaluation of degradation of coatings —Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion, First Edition

KS ISO 15528:2020 Kenya Standard — Paints, varnishes and raw materials for paints and varnishes — Sampling, First Edition

KS ISO 16474-1:2013 Kenya Standard — Paints and varnishes —Methods of exposure to laboratory light sources — Part 1: General guidance, First Edition

KS ISO 16474-2:2013 Kenya Standard — Paints and varnishes —Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps, First Edition

KS ISO 17132:2007 Kenya Standard — Paints and varnishes — T-bend test, First Edition

KS ISO 20566:2020 Kenya Standard — Paints and varnishes —Determination of the scratch resistance of a coating system using a laboratory-scale car-wash, First Edition

KS 2927:2021 Kenya Standard — Industrial solvents and chemicals — Sodium bicarbonate Specification, First Edition

KS 2489:2021 Kenya Standard — Engine coolant Specification, Second Edition

Food

KS ISO 11085:2015 Kenya Standard — Cereals, cereals-based products and animal feeding stuffs —Determination of crude fat and total fat content by the Randall extraction method, Second Edition

KS 2571:2021 Kenya Standard — Food fortification premix and fortificants — Requirements for supply in Kenya, Second Edition

KS 2844:2021 Kenya Standard — Fresh coarsely ground meat products — Specification, Second Edition

KS 2845:2021 Kenya Standard — Fermented sausages (salami) — Specification, Second Edition

KS ISO 1442:1997 Kenya Standard — Meat and meat products —Determination of moisture content (Reference method), First Edition

KS ISO 17604:2015 Kenya Standard — Microbiology of the food chain — Carcass sampling for microbiological analysis, Second Edition

KS ISO/TS 17728:2015 Kenya Standard — Microbiology of the food chain — Sampling techniques for

microbiological analysis of food and feed samples, First Edition

KS ISO/TS 13136:2012 Kenya Standard — Microbiology of food and animal feed — Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens — Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of 0157, 0111, 026, 0103 and 0145 serogroups, First Edition

KS ISO 936:1998 Kenya Standard — Meat and meat products — Determination of total ash, First Edition

KS ISO 1443:1973 Kenya Standard — Meat and meat products —Determination of total fat content, First Edition

KS CODEX STAN 60:1981 Kenya Standard -- Canned raspberries, First Edition

KS CODEX STAN 69:2019 Kenya Standard — Quick frozen raspberries, First Edition

KS CODEX STAN 103:2019 Kenya Standard — Quick frozen blueberries, First Edition

KS CODEX STAN 75:2019 Kenya Standard — Quick frozen peaches, First Edition

KS ISO 23391:2006 Kenya Standard — Dried rosehips —Specification and test methods, First Edition

KS ISO 8128-1:1993 Kenya Standard — Apple juice, apple juice concentrates and drinks containing apple juice — Determination of patulin content — Part 1: Method using high-performance liquid chromatography, First Edition

KS CODEX STAN 106:2003 Kenya Standard — General standard for irradiated foods, First Edition

KS CODEX STAN 206:1999 Kenya Standard — General standard for the use of dairy terms, First Edition

KS ISO 26462:2010 Kenya Standard — Milk — Determination of lactose content — Enzymatic method using difference in pH, First Edition

KS ISO 5765-1:2002 Kenya Standard — Dried milk, dried ice-mixes and processed cheese — Determination of lactose content — Part 1: Enzymatic method utilizing the glucose moiety of the lactose, First Edition

KS ISO 5765-2:2002 Kenya Standard — Dried milk, dried ice-mixes and processed cheese — Determination of lactose content — Part 2: Enzymatic method utilizing the galactose moiety of the lactose, First Edition

KS ISO/TS 27265:2009 Kenya Standard — Dried milk —Enumeration of the specially thermoresistant spores of thermophilic bacteria, First Edition

KS ISO 23065:2009 Kenya Standard — Milk fat from enriched dairy products — Determination of omega-3 and omega-6 fatty acid content by gas-liquid chromatography, First Edition

KS ISO 21422:2018 Kenya Standard — Milk, milk products, infant formula and adult nutritionals — Determination of chloride — Potentiometric titration method, First Edition

KS ISO 12779:2011 Kenya Standard — Lactose — Determination of water content — Karl Fischer method, First Edition

KS ISO 22662:2007 Kenya Standard — Milk -and milk products —Determination of lactose content by high-performance liquid chromatography (Reference method), First Edition

KS ISO 8968-3:2004/Cor 1:2011 Kenya Standard — Milk —Determination of nitrogen content — Part 3:

5th February, 2021 THE KENYA GAZETTE 459

Block-digestion method (Semi-micro rapid routine method) — TECHNICAL CORRIGENDUM 1. First Edition

KS EAS 992:2020 Kenya Standard — Beeswax — Specification, First Edition

KS EAS 36:2020

Kenya Standard — Honey — Specification, Second Edition

KS EAS 989:2020 Kenya Standard — Bee pollen — Specification, First Edition

KS EAS 990:2020 Kenya Standard — Bee propolis Specification, First Edition

KS EAS 991:2020 Kenya Standard — Stingless bee honey Specification, First Edition

KS EAS 105:2020 Kenya Standard — Roasted coffee beans and roasted ground coffee — Specification, Second Edition

KS EAS 130:2020 Kenya Standard — Green coffee beans Specification, Second Edition

KS EAS 975:2020 Kenya Standard — Instant (soluble) coffee Specification, First Edition

Electrotechnical

KS ISO 16832:2006 Kenya Standard — Acoustics — Loudness scaling by means of categories, First Edition

KS ISO 5136:2003 Kenya Standard — Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method, Second Edition

KS ISO 7029:2017 Kenya Standard — Acoustics — Statistical distribution of hearing thresholds related to age and gender, Second Edition

KS ISO 8253-1:2010 Kenya Standard — Acoustics — Audiometric test methods — Part 1: Pure-tone air and bone conduction audiometry, Second Edition

KS ISO 8253-3:2012 Kenya Standard — Acoustics — Audiometric test methods — Part 3: Speech audiometry, Second Edition

KS ISO 532-1:2017 Kenya Standard — Acoustics — Methods for calculating loudness — Part 1: Zwicker method, First Edition

KS ISO 532-2:2017 Kenya Standard — Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method, First Edition

KS ISO 9296:2017 Kenya Standard — Acoustics — Declared noise emission values of information technology and telecommunications equipment, Second Edition

KS ISO/TS 25108:2018 Kenya Standard — Non-destructive testing — NDT personnel training organizations, First Edition

KS ISO/TS 25107:2019 Kenya Standard — Non-destructive testing — NDT training syllabuses, First Edition

KS ISO 376:2011 Kenya Standard — Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines, Second Edition

KS ISO 6506-2:2017 Kenya Standard — Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines, Second Edition

KS ISO 6508-1:2016 Kenya Standard — Metallic materials —Rockwell hardness test — Part 1: Test method, Second Edition

KS ISO 6508-2:2015 Kenya Standard — Metallic materials —Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters, Second Edition

KS ISO 6508-3:2015 Kenya Standard — Metallic materials —Rockwell hardness test — Part 3: Calibration of reference blocks, First Edition

KS ISO 7700-1:2008 Kenya Standard — Food products — Checking the performance of moisture meters in use —Part 1: Moisture meters for cereals, Second Edition

KS ISO 7700-2:2011 Kenya Standard — Food products — Checking the performance of moisture meters in use --Part 2: Moisture meters for oilseeds, Second Edition

KS ISO/TS 50008:2018 Kenya Standard — Energy management and energy savings — Building energy data management for energy performance —Guidance for a systemic data exchange approach, First Edition

KS ISO 50007:2017 Kenya Standard — Energy services —Guidelines for the assessment and improvement of the energy service to users, First Edition

KS ISO 50021:2019 Kenya Standard — Energy management and energy savings — General guidelines for selecting energy savings evaluators, First Edition

KS ISO 50046:2019 Kenya Standard — General methods for predicting energy savings, First Edition

KS ISO 50045:2019 Kenya Standard — Technical guidelines for the evaluation of energy savings of thermal power plants, First Edition

KS ISO/TS 50044:2019 Kenya Standard — Energy saving projects (EnSPs) — Guidelines for economic and financial evaluation, First Edition

KS IEC/TS 62257-9-8:2020 Kenya Standard — Renewable energy and hybrid systems for rural electrification —Part 9-8: Integrated systems — Requirements for stand-alone renewable energy products with power ratings less than or equal to 350 W, First Edition

KS IEC 60904-9:2020 Kenya Standard — Photovoltaic devices —Part 9: Classification of solar simulator characteristics, First Edition

KS IEC 61400-21-1:2019 Kenya Standard — Wind energy generation systems — Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines, First Edition

KS IEC 61400-25-4:2016 Kenya Standard -L.' Wind energy generation systems — Part 25-4: Communications for monitoring and control of wind power plants —Mapping to communication profile, First Edition

KS IEC 61400-24:2019 Kenya Standard — Wind energy generation systems — Part 24: Lightning protection, First Edition

KS IEC 62108:2016, Concentrator photovoltaic (CPV) modules and assemblies — Design qualification and type approval, First Edition

KS IEC/TS 62257-7:2017 Kenya Standard — Recommendations for renewable energy and hybrid systems for rural electrification — Part 7: Generators, First Edition

KS IEC/TS 62257-7-3:2018 Kenya Standard — Recommendations for renewable energy and hybrid systems for rural electrification — Part 7-3: Generator set -Selection of generator sets for rural electrification systems, First Edition

KS IEC/TS 62257-9-1:2016 Kenya Standard — Recommendations for renewable energy and hybrid systems for rural electrification — Part 9-1: Integrated systems — Micropower systems, First Edition

460 THE KENYA GA7FTTE 5th February, 2021

KS IEC/TS 62257-9-6:2019 Kenya Standard — Renewable energy and hybrid systems for rural electrification — Part 9-6: Integrated systems — Recommendations for selection of Photovoltaic Individual Electrification Systems (PV-IES), First Edition

KS ISO 9060:2018 Kenya Standard — Solar energy —Specification and classification of instruments for measuring hemispherical solar and direct solar radiation, First Edition

Engineering

KS 2909:2021 Kenya Standard — Coated steel roofing and wailing accessories — Specification, First Edition

KS EAS 924-3:2020 Kenya Standard — Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice — Part 3: Liquefied petroleum gas installations involving storage vessels of individual water capacity exceeding 9000 L, First Edition

KS EAS 9244:2020 Kenya Standard — Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice — Part 4: Road, rail and maritime transportation of LPG in bulk, First Edition

KS EAS 938:2020 Kenya Standard — Transportable refillable steel and aluminium Liquefied Petroleum Gas (LPG) cylinders — Procedures for gas freeing and disposal, First Edition

KS EAS 939:2020 Kenya Standard — Grill for domestic Liquefied Petroleum Gas (LPG) cylinders — Specification, First Edition

KS EAS 940:2020 Kenya Standard — Mountable burner for use with Liquefied Petroleum Gas (LPG) — Specification, First Edition

KS EAS 976:2020 Kenya Standard — The petroleum industry- The petroleum industry — Storage and distribution of petroleum products in above-ground bulk installations, First Edition

KS EAS 977:2020 Kenya Standard — Petroleum industry —Installation of underground storage tanks, pumps/dispensers and pipe work at service stations and consumer installations — Code of practice, First Edition

KS EAS 978:2020 Kenya Standard — Storage and handling of liquid fuel — Large consumer installations —Code of practice, First Edition

KS EAS 979:2020 Kenya Standard — Road tankers for petroleum-based flammable liquids — Specification, First Edition

KS EAS 980:2020 Kenya Standard — Petroleum facilities —Retail and consumer outlets — Classification, First Edition

Leather and Textile

KS EAS 968:2020 Kenya Standard — Kenya Standard —Disposable adult diapers —Specification, First Edition

KS EAS 969:2020 Kenya Standard — Disposable baby diapers —Specification, First Edition

KS 2923-1:2021

Kenya Standard -- Tarpaulins for post-harvest handling of agricultural Produce —Specification — Part 1: Woven High density Polyethylene, First Edition

KS 2923-2:2021 Kenya Standard — Tarpaulins for post-harvest

handling of agricultural produce —

Specification — Part 2: Polyester fabric coated with Polyvinyl chloride (PVC), First Edition

KS ISO 105-F01:2001 Kenya Standard — Textiles — Tests for colour fastness — Part F01: Specification for wool adjacent fabric, First Edition

KS ISO 105-F02:2001 Kenya Standard — Textiles — Tests for colour fastness — Part F02: Specification for cotton and viscose adjacent fabrics, First Edition

KS ISO 105-F03:2001 Kenya Standard — Textiles — Tests for colour fastness — Part F03: Specification for polyamide adjacent fabric, First Edition

KS ISO 105-F04:2001 Kenya Standard — Textiles — Tests for colour fastness — Part R)4: Specification for polyester adjacent fabric, First Edition

KS ISO 105-F05:2001 Kenya Standard — Textiles — Tests for colour fastness — Part F05: Specification for acrylic adjacent fabric, First Edition

KS ISO 105-F07:2001 Kenya Standard — Textiles — Tests for colour fastness — Part F07: Specification for secondary acetate adjacent fabric, First Edition

KS ISO 48-2:2018 Kenya Standard — Rubber, vulcanized or thermoplastic — Determination of hardness —Part 2: Hardness between 10 IRHD and 100 IRHD, First Edition

KS ISO 48-3:2018 Kenya Standard — Rubber, vulcanized or thermoplastic — Determination of hardness —Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale, First Edition

KS ISO 48-4:2018 Kenya Standard — Rubber, vulcanized or thermoplastic — Determination of hardness —Part 4: Indentation hardness by durometer method (Shore hardness), First Edition

KS ISO 11640:2018 Kenya Standard — Leather — Tests for colour fastness — Colour fastness to cycles of to-and-fro rubbing, Second Edition

KS ISO 15702:1998 Kenya Standard — Leather — Tests for colour fastness — Colour fastness to machine washing, First Edition

KS ISO 15703:1998 Kenya Standard — Leather — Tests for colour fastness — Colour fastness to mild washing, First Edition

KS ISO 16177:2012 Kenya Standard — Footwear — Resistance to crack initiation and growth — Belt flex method, First Edition

KS ISO 17072-1:2019 Kenya Standard — Leather — Chemical determination of metal content — Part 1: Extractable metals, Second Edition

KS ISO 17072-2:2019 Kenya Standard — Leather — Chemical determination of metal content — Part 2: Total metal content, Second Edition

KS ISO 17233:2017 Kenya Standard — Leather — Physical and mechanical tests — Determination of cold crack temperature of surface coatings, First Edition

KS ISO 17489:2013 Kenya Standard — Leather — Chemical tests — Determination of tan content in synthetic tanning agents, First Edition

KS ISO 17694:2016 Kenya Standard — Footwear — Test methods for uppers and lining — Flex resistance, First Edition

KS ISO 3376:2020 Kenya Standard — Leather — Physical and mechanical tests — Determination of tensile strength and percentage elongation, Second Edition

KS ISO 4048:2018 Kenya Standard — Leather — Chemical tests — Determination of matter soluble in

5th February, 2021 THE KENYA GAZETTh 461

dichloromethane and free fatty acid content, Second Edition

KS ISO 868:2003

Kenya Standard — Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness), First Edition

KS ISO 4045:2018 Kenya Standard — Leather — Chemical tests — Determination of pH and difference figure, Second Edition

KS ISO 17130:2013 Kenya Standard — Leather — Physical and mechanical tests — Determination of dimensional change, First Edition

KS ISO 17708:2018 Kenya Standard — Footwear — Test methods for whole shoe — Upper sole adhesion, First Edition

KS ISO/TR 20572:2007 Kenya Standard — Footwear — Performance requirements for components for footwear —Accessories, First Edition

KS ISO 20876:2018 Kenya Standard — Footwear — Test methods for insoles — Resistance to stitch tear, Second Edition

KS ISO 5398-3:201.8 Kenya Standard — Leather—Chemical determination of chromic oxide content—Part 3: Quantification by atomic absorption spectrometry, Second Edition

KS ISO 17075-1:2017 Kenya Standard — Leather — Chemical determination of chromium (VI) content in leather — Part 1: Colorimetric method, First Edition

KS ISO 17075-2:2017 Kenya Standard — Leather — Chemical determination of chromium (VI) content in leather — Part 2: Chromatographic method, First Edition

KS ISO 5402-1:2017 Kenya Standard — Leather — Determination of flex resistance — Part 1: Flexometer method, Second Edition

KS SO 17131:2020 Kenya Standard — Leather — Identification of leather with microscopy, Second Edition

KS ISO 23910:2019 Kenya Standard — Leather — Physical and mechanical tests — Measurement of stitch tear resistance, Second Edition

KS ISO 4044:2017 Kenya Standard — Leather — Chemical tests — Preparation of chemical test samples, Second Edition

KS ISO 10195:2018 Kenya Standard — Leather — Chemical determination of chromium (VI) content in leather — Thermal pre-ageing of leather and determination of hexavalent chromium, First Edition

KS 2905-1:2021 Kenya Standard — Leather — Basic requirements for preservation premises of raw hides and skins — Part. 1: Wet salting premises, First Edition

KS 1620:2021 Kenya Standard — Bathroom slippers — Specification, Fifth Edition

Services

KS ISO 22674:2016 Kenya Standard — Dentistry — Metallic materials for fixed and removable restorations and appliances, First Edition

KS ISO 9917-1:2007 Kenya Standard — Dentistry — Water-based cements — Part 1: Powder/liquid acid-base cements, Second Edition

KS ISO 22052:2020 Kenya Standard — Dentistry — Central compressed air source equipment, First Edition

KS ISO 4007:2018 Kenya Standard — Personal protective equipment — Eye and face protection —Vocabulary, Second Edition

KS ISO 10993-1:2018 Kenya Standard — Biological evaluation of medical devices — Part I. Evaluation and testing within a risk trumaganent process, Second Edition

KS ISO 10993-3:2014 Kenya Standard --• Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity, Second Edition

KS ISO 10993-4:2017 Kenya Standard — Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood, Second Edition

KS ISO 10993-7:2008/Amd 1:2019 Kenya Standard — Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals —AMENDMENT I: Applicability of allowable limits for neonates and infants, First Edition

KS ISO 10993-9:2019 Kenya Standard — Biological evaluation of medical devices — Part 9: Framework for identification and quantification of potential degradation products, Second Edition

KS ISO 10993-11:2017 Kenya Standard — Biological evaluation of medical devices — Part 11: Tests for systemic toxicity, Second Edition

KS ISO 10993-18:2020 Kenya Standard — Biological evaluation of medical devices — Part 18: Chemical characterization of medical device materials within a risk management process, First Edition

KS ISO 19833:2018 Kenya Standard — Furniture — Beds — Test methods for the determination of stability, strength and durability, First Edition

KS ISO 7171:2019 Kenya Standard — Furniture — Storage units — Test methods for the determination of stability, Second Edition

KS ISO 10001:2018 Kenya Standard — Quality management —Customer satisfaction — Guidelines for codes of conduct for organizations, First Edition

KS ISO/IEC 17000:2020 Kenya Standard — Conformity assessment — Vocabulary and general principles, Second Edition

KS ISO/IEC TS 17021-8:2019 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 8: Competence requirements for auditing and certification of management systems for sustainable development in communities, First Edition

KS ISO/IEC TS 17021-10:2018 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 10: Competence requirements for auditing and certification of occupational health and safety management systems, First Edition

KS ISO/IEC TS 17021-11:2018 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part I1: Competence requirements for auditing and certification of facility management (FM) management systems, First Edition

KS ISO/IEC TS 17021-12:2020 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 12: Competence requirements for auditing and certification of collaborative business relationship management systems, First Edition

KS ISO 17033:2019 Kenya Standard — Ethical claims and supporting information — Principles and requirements, First Edition

462 THE KENYA GAZETTE 5th February, 2021

KS ISO/IEC TR 17032:2019 Kenya Standard — Conformity assessment — Guidelines and examples of a scheme for the certification of processes, First Edition

KS ISO/IEC 17029:2019 Kenya Standard — Conformity assessment -- General principles and requirements for validation and verification bodies, First Edition

KS ISO 17034:2016 Kenya Standard — General requirements for the competence of reference material producers, First Edition

KS ISO/1EC TR 17028:2017 Kenya Standard — Conformity assessment — Guidelines and examples of a certification scheme for services, First Edition

Codex

KNWA 2931:2021 Kenya National Workshop Agreement — Covid-19 and food safety for food businesses — Guidelines, First Edition

EAC/COMESA

KS 618:2021 Kenya Standard — Cider and perry — Specification, Third Edition

KS 2150:2021 Kenya Standard — Spirit-based ready to drink alcoholic beverage — Specification, Second Edition

The following standards are confirmed forthwith;

KS 914:2013

Kenya Standard — Acetone for industrial use — Specification

KS 1'180:2012

Kenya Standard — Ethyl methyl ketone (butanone for industrial use) — Specification

KS 156:2014

Kenya Standard — Caustic soda, analytical and technical — Specification

KS 1292:2015

Kenya Standard — Specification for ethyl acetate for industrial use

KS 1296:2015

Kenya Standard — Specification for ethyl glycol (2-ethoxyethanol) for industrial use

KS 1294:2015

Kenya Standard — Specification for isopropyl acetate for industrial use

KS 1181:2015

Kenya Standard — Specification for methyl isobutyl ketone (4-Methyl penta-n-2-one)

KS CODEX STAN 249 Kenya Standard — Specification for instant noodles

KS EAS 802:2013 Kenya Standard — Textured soya protein products — Specification

KS ISO 7973:1992 Kenya Standard — Cereals and milled cereal products — Determination of the viscosity of flour — Method using an amylograph

KS ISO 3093:2009 Kenya Standard — Wheat rye and their flours durum wheat and durum wheat semolina determination of the falling number according to Hagberg Perten

KS ISO 6634:1982 Kenya Standard — Fruits, vegetables and derived Products-Determination of arsenic Content-Silver diethyldithiocarbamate spectrophotometric method

KS 342:1981

Kenya Standard — Specification for canned green beans and canned wax beans

KS 1175:1994

Kenya Standard — Specification for canned guava

KS ISO 763:2003

Kenya Standard — Fruit and vegetable products — Determination of ash insoluble in hydrochloric acid

KS ISO 2448:1998 Kenya Standard — Fruit and vegetable products — Determination of ethanol content

KS ISO 762:2003 Kenya Standard — Fruit and vegetable products — Determination of mineral impurities content

KS ISO 6557-2:1984 Kenya Standard — Fruits, vegetables and derived products Determination of ascorbic acid content Routine methods

Kenya Standard — Fruits, vegetables and derived products Determination of benzoic acid content Spectrophotometric method

Kenya Standard — Fruits, vegetables and derived products — Determination of copper content — Method using flame atomic absorption spectrometry

Kenya Standard — Fruits, vegetables and derived products — Determination of iron content — 1,10- Phenanthroline photometric method

Kenya Standard — Fruits, vegetables and derived products — Determination of lead content — Flameless atomic absorption spectrometric method

Kenya Standard — Fruits, vegetables and derived products — Determination of volatile acidity

Kenya Standard — Fruits, vegetables and derived products - Determination of zinc content - Atomic absorption spectrometric method

KS 432:1984 Kenya Standard — Methods of test for fruit juices and similar products

KS 140:1980 Kenya Standard — Methods of test for processed fruits and vegetables

KS 342:1981 Kenya Standard — Specification for canned green beans and canned wax beans

KS 1175:1994 Kenya Standard — Specification for canned guava

KS ISO 8851-1:2004 Kenya Standard — Butter — Determination of moisture, non-fat solids and fat contents (Routine methods) — Part 1: Determination of moisture content

KS ISO 3727-2:2001 Kenya Standard — Butter Determination of moisture, nonfat solids and fat contents — Part 2: Determination of non-fat solids content (Reference Method)

KS ISO 3727-3:2003 Kenya Standard — Butter Determination of moisture, nonfat solids and fat contents -- Part 3: Calculation of fat content

KS ISO 13559:2002 Kenya Standard — Butter, fermented milks and fresh cheese — Enumeration of contaminating microorganisms — Colony-count technique at 30 'V

KS ISO 14377:2002 Kenya Standard — Canned evaporated milk —Determination of tin content — Method using graphite furnace atomic absorption spectrometry

KS ISO 5739:2003 Kenya Standard — Caseins and caseinates —Determination of contents of scorched particles and of extraneous matter

KS ISO 5550:2006 Kenya Standard — Caseins and caseinates —Determination of moisture content (Reference method)

KS ISO/TS 2963:2006 Kenya Standard — Cheese and processed cheese products — Determination of citric acid content — Enzymatic method

KS ISO 1735:2004 Kenya Standard — Cheese and processed cheese products Determination of fat content — Gravimetric method (Reference method)

KS ISO 5518:2007

KS ISO 7952:1994

KS ISO 5517:1978

KS ISO 6633:1984

KS ISO 6632:1981

KS ISO 6636-2:1981

5th February, 2021 THE KENYA GAZETTE 463

KS ISO 3432:2008 Kenya Standard — Cheese — Determination of fat content — Butyrometer for Van Gulik method

KS ISO 3433:2008 Kenya Standard — Cheese — Determination of fat content — Van Gulik method

KS 1552:2016 Kenya Standard — Code of hygienic practice for milk and milk products

KS COD STAN 264:1966 Kenya Standard — Codex standard for danbo

KS ISO 2450:2008 Kenya Standard — Cream — Determination of fat content — Gravimetric method (Reference Method)

KS ISO 6092:1980 Kenya Standard — Dried milk —Determination of titratable acidity (Routine Method)

KS ISO 12080-1:2009 Kenya Standard — Dried skimmed milk —Determination of vitamin A content — Part 1: Colorimetric method

KS ISO 12080-2:2009 Kenya Standard — Dried skimmed milk —Determination of vitamin A content — Part 2: Method using high-performance liquid chromatography

KS ISO 14892:2002 Kenya Standard — Dried skimmed milk —Determination of vitamin D content using high-performance liquid chromatography

KS ISO 27205:2010 Kenya Standard — Fermented milk products —Bacterial starter cultures — Standard of identity

KS ISO 3728:2004 Kenya Standard — Ice-cream and milk ice —Determination of total solids content (Reference Method)

KS ISO 6888-2:1999 Amd1:2003 Kenya Standard — Microbiology of food and animal feeding Stuffs — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) — Part 2: Technique using rabbit plasma

KS ISO 6887-4:2003 Kenya Standard — Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination —Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products

KS ISO 11816-2:2016 Kenya Standard — Milk and milk products —Determination of alkaline phosphatase activity — Part 2: Fluorimetric method for cheese -

KS ISO 5738:2004 Kenya Standard — Milk and milk products —Determination of copper content — Photometric method (Reference Method)

KS ISO/TS 6733:2006 Kenya Standard — Milk and milk products —Determination of lead content — Graphite furnace atomic absorption spectrometric method

KS ISO 8968-1:2014 Kenya Standard — Milk and milk products —Determination of nitrogen content — Part I: Kjeldahl principle and crude protein calculation

KS ISO 3890-1:2009 Kenya Standard — Milk and milk products —Determination of residues of organochlorine compounds (pesticides) — Part I: General considerations and extraction methods

KS ISO 3890-2:2009 Kenya Standard — Milk and milk products -Determination of residues of organochlorine compounds (pesticides) — Part 2: Test methods for crude extract purification and confirmation

KS ISO 14156:2001 Kenya Standard — Milk and milk products — Extraction methods for lipids and liposoluble compounds

KS ISO 14675:2003 Kenya Standard — Milk and milk products —Guidelines for a standardized description of competitive enzyme immunoassays —Determination of aflatoxin MI content

KS ISO 18330:2003 Kenya Standard — Milk and milk products —Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues

KS ISO 5538:2004 Kenya Standard — Milk and milk products —Sampling - Inspection by attributes

KS ISO 7328:2008 Kenya Standard — Milk-based edible ices and ice mixes — Determination of fat content —Gravimetric method (Reference Method)

KS ISO 8381:2008 Kenya Standard — Milk-based infant foods Determination of fat content — Gravimetric method (Reference method)

KS ISO 17997-2:2004 Kenya Standard — Milk — Determination of casein-nitrogen content — Part 2: Direct method

KS ISO 8968-3:2004 Kenya Standard — Milk — Determination of nitrogen content — Part 3: Block-digestion method (Semi-micro rapid routine method)

KS ISO 14637:2004 Kenya Standard — Milk — Determination of urea content — Enzymatic method using difference in pH (Reference Method). fat —Detection of vegetable fat by gas-liquid chromatography of sterols (Reference method)

KS ISO 15885:2002 Kenya Standard — Milk fat — Determination of the fatty acids composition by gas-liquid chromatography

KS ISO 15884:2002 Kenya Standard — Milk fat — Preparation of fatty acid methyl esters

KS ISO 8262-1:2005 Kenya Standard — Milk products and milk-based foods Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method) — Part 1: Infant foods

KS ISO 29981:2010 Kenya Standard — Milk products —Enumeration of presumptive bifidobacteria — ColOny count technique at 37 °C

KS ISO 20128:2006 Kenya Standard — Milk products —Enumeration of presumptive Lactobacillus acidophilus on a selective medium-colony-count technique at 37 °C

KS 2191:2016 Kenya Standard — Pasteurized goat milk — Specification

KS ISO 7208: 2008 Kenya Standard — Skimmed milk, whey and buttermilk — Determination of fat content —Gravimetric method (Reference method)

KS 703:1993 Kenya Standard — Specification for pasteurized reconstituted/recombined milk

KS ISO 6734:2010 Kenya Standard — Sweetened condensed milk —Determination of total solids content (Reference method) Sweetened condensed milk —Determination of total solids content (Reference Method)

KS ISO 13580:2005 Kenya Standard Yogurt — Determination of total solids content (Reference Method)

KS ISO 6887-1:1999 Kenya Standard — Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination —Part 1: General rules for the preparation

KS ISO 6887-3:2003 Kenya Standard — Microbiology of food and animal feeding stuffs — Preparation of test samples. initial suspension and decimal dilutions for microbiological examination —Part 3: Specific rules for the preparation of fish

464 THE KENYA GAZETTE 5th February, 2021

KS 1851-2:2009

Kenya Standard — Thermal solar systems and components — Solar collectors — Part 2: Test methods

KS 1852-1:2009

Kenya Standard — Thermal solar systems and components — Factory made systems — Part 1: General requirements

KS 1852-2:2009

Kenya Standard — Thermal solar systems components — Factory made systems — Part 2: Test methods

KS 1855-1:2009

Kenya Standard — Thermal solar systems and components — Custom built systems — Part 1: General requirements

KS 1855-2:2009

Kenya Standard — Thermal solar systems and components — Custom built systems — Part 2: Test methods

KS 1855-3:2009

Kenya Standard — Thermal solar systems and components — Custom built systems — Part 3: Performance characterization of stores for solar heating systems

KS 1869:2009

Kenya Standard — Determination of solar reflectance near ambient temperature using a portable solar reflectometer test method

KS 1870:2009

Kenya Standard — Exposure of solar collector cover materials to natural weathering under conditions simulating stagnation mode test method

KS 1871:2009

Kenya Standard — Determining resistance of solar collector covers to hail by impact with propelled ice balls test method

KS 1890:2009

Kenya Standard — Installation and service of solar space heating systems for one- and two-family dwellings code of practice

KS 1891:2009

Kenya Standard — Evaluating absorptive solar receiver materials when exposed to conditions simulating stagnation in solar collectors with cover plates test method

KS 1898:2009

Kenya Standard — Standard method for on-site inspection and verification of operation of solar domestic hot water systems

KS IEC 62124:2004 Kenya Standard — Photovoltaic PV stand-alone systems design verification

KS ISO 8528-10:1998 Kenya Standard — Reciprocating internal combustion engine driven alternating current generating sets Part 10: Measurement of airborne noise by the enveloping surface method

KS ISO 8528-12:1997 Kenya Standard — Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety devices

KS ISO 9459-1:1993 Kenya Standard — Solar heating — Domestic water heating systems— Part 1: Performance rating procedure using indoor test methods

KS ISO 9459-2:1995 Kenya Standard — Solar heating — Domestic water heating systems — Part 2: Outdoor test methods for system performance characterization and yearly performance prediction of solar only systems

KS ISO 9459-5:2007 Kenya Standard — Solar heating — Domestic water heating systems — Part 5: System performance characterization by means of whole system tests and computer simulation

KS ISO 9488:1999 Kenya Standard — Solar energy — Vocabulary

KS ISO 9553:1997 Kenya Standard — Solar energy methods of testing preformed rubber seals and sealing compounds used in collectors

KS ISO 6887-2:2003 Kenya Standard — Microbiology of food and animal feeding stuffs -- Preparation of test samples, initial suspension and decimal dilutions for microbiological examination —Part 2: Specific rules for the preparation of meat

KS CAC/GL 22:1999 Kenya Standard — Revised regional guidelines for the design of control measures for street-vended foods in Africa

KS EAS 151:2000 Kenya Standard — Hazard Analysis Critical Control Points (HACCP)

KS CAC/GI, 61:2007 Kenya Standard — Guidelines on the application of general principles of food hygiene to the control of listeria monocytogenes in foods

KS CAC/GL 69:2008 Kenya Standard — Guidelines for the validation of food safety control measures

KS ISO 22006:2009 Kenya Standard — Quality management systems — Guidelines for the application of ISO 9001:2008 to crop production

KS 2404:2015

Kenya Standard — Tea — Raw material for extraction — Specification

KS 2128:2015

Kenya Standard — Tea industry — Code of practice

KS EAS 740:2010 Kenya standard — Cassava flour Specification

KS EAS742:2010

Kenya standard Food grade cassava starch Specification

KS EAS743:2010

Kenya standard — Cassava crisps Specification

KS EAS 744:2010 Kenya standard — Cassava and cassava products — Determination of total cyanogens — Enzymatic assay method

KS EAS745:2010

Kenya standard — Potato crisps — Specification

KS EAS746:2010

Kenya standard — Frozen potato chips — Specification

KS EAS747:2010

Kenya standard — Fried potato chips — Specification

KS EAS748:2010

Kenya standard — Fresh potato tuber (ware potato tuber) — Specification

KS EAS 738:2010 Kenya standard — Fresh sweet cassava —Specification

KS EAS739:2010

Kenya standard -- Dried cassava chips — Specification

KS 2090:2007

Kenya standard — Handling of ware potatoes — Code of practice

KS 2064:2009

Kenya Standard — Cassava pellets Specification

KS ISO 8253-2:2009 Kenya Standard — Acoustics — Audiometric test methods — Part 2: Sound field audiometry with pure-tone and narrow-band test signals.

KS ISO 230-5:2000 Kenya Standard — Test code for machine tools — Part 5: Determination of the noise emission.

KS ISO 11095:1996 Kenya Standard — Linear calibration using reference materials

KS 1709-4:2009

Kenya Standard — Batteries for use in photovoltaic power systems specification —Part 4: recommended practice for sizing lead acid batteries for photovoltaic PV systems

KS 1851-1:2009

Kenya Standard — Thermal solar systems and components — Solar collectors — Part I: General requirements

5th February, 2021 THE KENYA GAZETTE 465

KS ISO 9846:1993 Kenya Standard — Solar energy calibration of a pyranometer using a pyrheliometer

KS ISO/tr 9901:1990 Kenya Standard — Solar energy field pyranometers recommended practice for use

KS 1860:2009 Kenya Standard — Solar heating systems for domestic hot water design installation repair and maintenance code of practice

KS 1872:2009 Kenya Standard — Standard practice for non- operational exposure and inspection of a solar collector

KS 1873:2009

Kenya Standard — Standard practice for exposure of cover materials for solar collectors to natural weathering under conditions simulating operational mode

KS 1892:2009

Kenya Standard — Standard practice for generating all day thermal performance data for solar collectors

KS 1895:2009

Kenya Standard — Solar heating systems for swimming pools code of practice

KS ISO 9059:1990 Kenya Standard — Solar energy calibration of field pyrheliometers by comparison to a reference pyrheliometer

KS ISO 9808:1990 Kenya Standard — Solar water heaters elastomeric materials for absorbers connecting pipes and fittings method of assessment

KS ISO 9845-1:1992 Kenya Standard — Solar energy reference solar spectral irradiance at the ground at different receiving conditions — Part 1: Direct normal and hemispherical solar irradiance for air mass 1.5

KS ISO/TR 10217:1989 Kenya Standard — Solar energy water heating systems guide to material selection with regard to internal corrosion

KS IEC 60282-2:2008 Kenya Standard — High-voltage fuses — Part 2: Expulsion fuses

KS IEC 61558-2-1:2007 Kenya Standard — Safety of power transformers, power supplies, reactors and similar products — Part 2-1: Particular requirements and test a for separating transformers and power supplies incorporating separating transformer

KS IEC 62109-1:2010 Kenya Standard — Safety of power converters for use in photovoltaic power systems — Part 1: General requirements

KS IEC 61558-2-2:2007 Kenya Standard — Safety of power transformers, power supplies, reactors and similar product — Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformer

KS IEC 60076-12:2008 Kenya Standard — Power transformers —Part 12: Loading guide for dry-type power transformers

KS IEC 60076-18:2012 Kenya Standard — Power transformers —Part 18: Measurement of frequency response

KS IEC 61439-3:2012 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

KS IEC 61439-4:2012 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS)

KS IEC 61439-5:2014 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks

KS IEC 61439-6:2012 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 6: Busbar trunking systems (busways)

KS EEC 61970-1:2005 Kenya Standard — Energy management system application program interface (EMS-API) —Part 1: Guidelines and general requirements

KS IEC/TS 61970-2:2004 Kenya Standard — Energy management system application program interface (EMS-API) — Part 2: Glossary

KS IEC 61850-3:2013 Kenya Standard — Communication networks and systems for power utility automation — Part 3: General requirements

KS IEC 61850-4:2011 Kenya Standard — Communication networks and systems for power utility automation —Part 4: System and project management

KS IEC 61850-5:2013 Kenya Standard — Communication networks and systems for power utility automation —Part 5: Communication requirements for functions and device models

KS IEC 62052-31:2015 Kenya Standard — Electricity metering equipment (AC) — General requirements, tests and test conditions — Part 31: Product safety requirements and tests

KS IEC 62055-51:2007 Kenya Standard — Electricity metering —Payment systems — Part 51: Standard transfer specification (STS) — Physical layer protocol for one-way numeric and magnetic card token carriers

KS IEC 60076-1:2011 Kenya Standard — Power transformers — Part 1: General

KS IEC 60034-2-1:2014 Kenya Standard — Rotating electrical machines — Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

KS IEC 60034-2-2:2010 Kenya Standard — Rotating electrical machines — Part 2-2: Specific methods for determining separate losses of large machines from tests — Supplement to IEC 60034-2-1

KS IEC 60076-4:2002 Kenya Standard — Power transformers — Part 4: Guide to the lightning impulse and switching impulse testing — Power transformers and reactors

KS IEC 60076-6:2007 Kenya Standard — Power transformers — Part 6: Reactors

KS IEC 60947-8:2006 Kenya Standard — Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

KS TEC 61869-1:2007 Kenya Standard — Instrument transformers —Part 1: General requirements

KS IEC 60050-321:1986 Kenya Standard — International Electrotechnical Vocabulary (IEV) — Part 321: Instrument transformers

KS IEC 60947-5-4:2002 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests

KS IEC 60947-5-6:1999 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-6: Control circuit devices and switching elements — DC interface for proximity sensors and switching amplifiers (NAMUR)

KS IEC 60947-5-9:2006 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-9: Control circuit devices and switching elements — Flow rate switches

466 THE KENYA GAZETTE 5th February, 2021

KS IEC 60947-7-1:2009 Kenya Standard — Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors

KS IEC 60947-7-2:2009 Kenya Standard — Low-voltage switchgear and controlgear — Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors

KS IEC 61558-2-6:2009, Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers

KS IEC 61558-2-7:2007 Kenya Standard — Safety of power transformers, power supplies, reactors and similar products — Part 2-7: Particular requirements and tests for transformers and power supplies for toys

KS IEC 60076-12:2008 Kenya Standard — Power transformers —Part 12: Loading guide for dry-type power transformers

KS 1663-1:2001

Kenya Standard — Determination of resistance to bending and abrasion of heavy leather — Part 1: Resistance to bending

KS 1663-2:2001

Kenya Standard — Determination of resistance to bending and abrasion of heavy leather — Part 2: Resistance to abrasion

KS 2625:2016

Kenya Standard — Footballs — Specification

KS 1946:2005 Kenya Standard — Footwear — Test for insoles — Abrasion resistance

KS 1631:2002 Kenya Standard — Glossary of terms relating to footwear

KS 819:1990 Kenya Standard — Glossary of terms relating to hides, skins and leather

KS 415:1983

Kenya Standard — Glossary of terms relating to hosiery

KS 1798:2005 Kenya Standard — Labelling of footwear

KS ISO 19952:2005 Kenya Standard — Footwear — Vocabulary

KS ISO 5398-2:2009 Kenya Standard — Leather — Chemical determination of chromic oxide content — Part 2: Quantification by colorimetric determination

KS 677:2016

Kenya Standard — Leather — Full-chrome upper leather — Specification

KS ISO 17229:2016 Kenya Standard — Leather — Physical and mechanical tests — Determination of water vapour absorption

KS 2624-2:2016

Kenya Standard — Leather sector — Code of practice — Part 2: Handling of raw hides and skins in a slaughter house

KS 1616:2001

Kenya Standard — Method for determination of the strength of buckle fastening assemblies in footwear

KS 1613:2000

Kenya Standard — Method for impact resistance on rigid units and shoe bottoms

KS 1621:2000

Kenya Standard — Method of test for fatigue resistance of heels of ladies' shoes

KS 1612:2001

Kenya Standard — Method of test for finished footwear resistance to water penetration

KS 1944:2005

Kenya Standard — Method of test for insoles pin holding strength

KS 1947:2005

Kenya Standard — Method of test for outsoles, insoles, linings and insocks — Water soluble content

Kenya Standard — Method of test for resistance of complete footwear to heat

Kenya Standard — Method of test for resistance of heels of ladies' shoes to lateral impact

Kenya Standard — Method of test for strength of top piece attachment to shoe heels

Kenya Standard — Methods of sampling and testing of leather — Part 2: Chemical testing

Kenya Standard — Methods of test for footwear for insoles and insocks — Water absorption and desorption

Kenya Standard — Moulded plastics footwear — Lined or unlined poly (vinyl chloride) boots for general industrial use — Specification

Kenya Standard —Moulded plastics footwear — Lined or unlined poly (vinyl chloride) industrial boots with chemical resistance —Specification

Kenya Standard — Moulded plastics footwear — Lined or unlined polyurethane boots for general industrial use — Specification

Kenya Standard — Personal protective equipment — Test methods for footwear

Kenya Standard —Specification for sizes and fittings of footwear and footwear lasts

Kenya Standard — Specification for sole leather

Kenya Standard — Academic quality assurance in higher education- Code of practice — Part 7: Work-based and placement learning / Higher Education Services

Kenya Standard — Academic quality assurance in higher education — Code of practice — Part 8: Career education, information and guidance / Higher Education Services

Kenya Standard — Glossary of terms used in the education sector — Part 5: Tertiary education services

Kenya Standard — Glossary of terms used in the education sector 7- Part 3: Secondary education services

Kenya Standard — Glossary of terms used in the education sector — Part 4: Special education services

Kenya Standard — Special educational needs code of practice — Part 4: Identification assessment and provision in early childhood development and education

Kenya Standard — Special educational needs code of practice — Part 5: Identification assessment and provision in primary education

Kenya Standard — Special educational needs —Code of practice — Part 6: Identification, assessment and provision in the secondary education

Kenya Standard — Special educational needs —Code of practice — Part 7: Statutory assessment / Special Education Services

Kenya Standard - Special educational needs —Code of practice — Part 8: Statements. / Special Education

Kenya Standard — Special educational needs Code of practice Part 9: Annual review. / Special Education

Kenya Standard — Special educational needs —Code of practice — Part 10: Working in

KS 1617:2000

KS 1622:2000

KS 1611:2005

KS 678-2:1992

KS 1945:2005

KS ISO 4643:1992

KS ISO 6110:1992

KS ISO 5423:1992

KS ISO 20344:2011

KS 1632:2002

KS 679:1989

KS 2368-7:2014

KS 2368-8:2014

KS 2217-5:2012

KS 2217-3:2010

KS 2217-4:2010

KS 2442-4:2014

KS 2442-5:2014

KS 2442-6:2015

KS 2442-7:2015

KS 2442-8:2015

KS 2442-9:2015

KS 2442-10:2015

5th February, 2021 THE KENYA GAZETTE 467

partnership with other agencies. / Special Education.

KS ISO 10555-2:2013 Kenya Standard — Intravascular catheters Sterile and single-use catheters — Part 1: General requirements

KS ISO 10555-3:2013 Kenya Standard — Intravascular catheters Sterile and single-use catheters — Part 3: Central venous catheters

KS ISO 10555-4:2013 Kenya Standard — Intravascular catheters Sterile and single-use catheters — Part 4: Balloon dilatation catheters

KS ISO 10555-5:2013 Kenya Standard — Intravascular catheters —Sterile and single-use catheters — Part 5: Over- needle peripheral catheters

KS ISO 21563:2013 Kenya Standard — Dentistry — Hydrocolloid impression materials

KS ISO 10993-2:2006 Kenya Standard — Biological evaluation of medical devices — Part 2: Animal welfare requirements

KS ISO 10993-5:2009 Kenya Standard — Biological evaluation of medical devices — Part 5: Tests for in vitro cytotoxicity

KS ISO 10993-7:2008 Kenya Standard — Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals

KS 2048-1:2007 Kenya Standard — Occupational noise management — Part 1: Overview

KNWA 2550:2014 Kenya Standard — Stethoscope —Specification

KNWA 2555:2014 Kenya Standard — Mobile drip stand —Specification

KS ISO 4211-2:2013 Kenya Standard — Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat

KS ISO 4211-3:2013 Kenya Standard — Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat

KS ISO 4211-4:1988 Kenya Standard — Furniture — Tests for surfaces — Part 4: Assessment of resistance to impact

KS ISO 7172:1988 Kenya Standard — Furniture — Tables Determination of stability

KS ISO 7172:1998 Kenya Standard — Furniture — Tables — Determination of stability

ISO 7173:1989

Kenya Standard — Furniture — Chairs and stools — Determination of strength and durability

KS ISO 7174-1:1988 Kenya Standard — Furniture — Chairs —Determination of stability — Part 1: Upright chairs and stools

KS ISO 7174-2:1998 Kenya Standard — Furniture — Chairs —Determination of stability — Part 2: Chairs with tilting or reclining mechanisms when fully reclined, and rocking chairs

KS ISO 10001:2018 Kenya Standard — Quality management —Customer satisfaction — Guidelines for codes of conduct for organizations

KS ISO/IEC 17021-1:2015 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements

KS ISO 16212:2008 Kenya Standard — Cosmetics — Microbiology — Enumeration of yeast and mould

KS ISO 18415:2007 Kenya Standard — Cosmetics Microbiology — Detection of specified and non-specified microorganisms

KS ISO 18416:2015 Kenya Standard — Cosmetics — Microbiology — Detection of Candida albicans

KS ISO 21148:2005 Kenya Standard — Cosmetics — Microbiology — General instructions for microbiological

'examination

KS ISO 21149:2006 Kenya Standard — Cosmetics — Microbiology — Enumeration and detection of aerobic mesophilic bacteria

KS ISO 21150:2015 Kenya Standard — Cosmetics — Microbiology — Detection of Escherichia coli

KS ISO 22717:2015 Kenya Standard — Cosmetics — Microbiology — Detection of Pseudomonas aeruginosa

KS ISO 22718:2015 Kenya Standard — Cosmetics — Microbiology — Detection of Staphylococcus aureus

KS EAS 185:2007 Kenya Standard — Papain powder specification

KS ISO 24153:2009 Kenya Standard — Random sampling and randomization procedures

KS ISO 3475:1975 Kenya Standard — Essential oil of aniseed (Pimpinella anisum L.)

KS ISO 356:1999 Kenya Standard — Essential oils — Preparation of test samples

The following standards are withdrawn forthwith;

KS 1738-2:2001

Kenya Standard — Specifications for ceramic floor and wall tiles - Part 2: Extruded ceramic tiles with low water absorption E <=3 percent, To be replaced by KS ISO 13006:2018

KS 1738-3:2001

Kenya Standard — Specifications for ceramic floor and wall tiles - Part 3: Extruded ceramic tiles with low water absorption 3 percent <=E<=6 percent, To be replaced by KS ISO 13006:2018

KS 1738-4:2001 Kenya Standard Specifications for ceramic floor and wall tiles - Part 4: Extruded ceramic tiles with low water absorption of 6<e<=10 percent. <="" a=""> </e<=10>, To be replaced by KS ISO 13006:2018

KS 1738-5:2001 Kenya Standard — Specifications for ceramic floor and wall tiles - Part 5: Extruded ceramic tiles with low water absorption E>10 percent, To be replaced by KS ISO 13006:2018

KS 1738-6:2001 Kenya Standard — Specifications for ceramic floor and wall tiles - Part 6: Dust-pressed tiles with low water absorption (E<=3 percent), To be replaced by KS ISO 13006:2018

KS 1738-6:2001 Kenya Standard — Specifications for ceramic floor and wall tiles - Part 6: Dust-pressed tiles with low water absorption (E<=3 percent), To be replaced by KS ISO 13006:2018

KS 1738-7:2001 Kenya Standard — Specifications for ceramic floor and wall tiles - Part 7: Dust-pressed tiles with low water absorption 3 percent <=E<=6 percent, To be replaced by KS ISO 13006:2018

KS 1738-8:2001 Kenya Standard — Specifications for ceramic floor and wall tiles - Part 8: Dust-pressed tiles with low Water absorption 6<="10" percentx="" a="">, To be replaced by KS ISO 13006:2018

KS 1738-9:2001 Kenya Standard — Specifications for ceramic floor and wall tiles - Part 9: Dust-pressed tiles with low water absorption E >10 percent, To be replaced by KS ISO 13006:2018

KS 2489:2013 Kenya Standard — Engine coolant — Specification, To be replaced by KS 2489:2021

468 THE KENYA GAZETTE 5th February, 2021

KS ISO 1518-1:2000 Kenya Standard — Paints and varnishes —Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides, To be replaced by KS ISO 1518-1:2019

KS ISO 11085:2008 Kenya Standard — Cereals and cereals based products and animal feeding stuffs determination of crude fat and total fat content by the Randall extraction method, To be replaced by KS ISO 11085:2015

KS 2571:2014 Kenya Standard — Food fortification premix and fortificants — Requirements for supply in Kenya, To be replaced by KS 2571:2021

KS 2844:2019 Kenya Standard — Fresh coarsely ground meat products specification, To be replaced by KS 2844:2021

KS 2845:2019 Kenya Standard — Fermented Sausages (Salami) Specification, To be replaced by KS 2845:2021

KS 1279:2013 Kenya Standard — Beeswax — Specification, To be replaced by KS EAS 992:2020

KS EAS 36:2000 Kenya Standard — Honey — Specification, To be replaced by KS EAS 36:2020

KS 1052:2011

Kenya Standard — Roasted coffee beans and roasted ground coffee — Specification, To be replaced by KS EAS 105:2020

KS EAS 130:1999 Kenya Standard — Green coffee beans —Specification, To be replaced by KS EAS 130:2020

KS 175: 2017 Kenya Standard — Instant coffee — Specification, To be replaced by KS EAS 975:2020

KS ISO 17604:2003 Kenya Standard — Microbiology of the food chain — Carcass sampling for microbiological analysis, to be replaced by KS ISO 17604:2015

KS 1938-3:2012 Kenya Standard — Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice — Part 3: Liquefied petroleum gas (LPG) installations involving storage vessels of individual water capacity exceeding 9000 L, To be replaced by KS EAS 924-3:2020

KS 1938-2:2012 Kenya Standard — Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice — Part 2: Transportation of LPG in bulk by road, rail and sea, To be replaced by KS EAS 924-4:2020

KS 2083:2007 Kenya Standard — Transportable refillable steel and aluminium Liquefied Petroleum Gas (LPG) cylinders — Disposal, To be replaced by KS EAS 938:2020

KS 2171:2008

Kenya Standard — Grill for domestic Liquefied Petroleum Gas (LPG) cylinders —Specification, To be replaced by KS EAS 939:2020

stations and consumer installations — Code of practice, To be replaced by KS EAS 977:2020

KS 2122:2008 Kenya Standard — Storage and handling of liquid fuel — Large consumer installations —Code of practice, To be replaced by KS EAS 978:2020

KS 2180:2010 Kenya Standard — Road tankers for petroleum- based flammable liquids — Specification, To be replaced by KS EAS 979:2020

KS 2506:2010 Kenya Standard — Petroleum facilities — Retail and consumer outlets — Classification, To be replaced by KS EAS 980:2020

KS ISO 7700-1:1999 Kenya Standard — Check of the calibration of moisture meters — Part 1: Moisture meters for cereals, to be replaced by KS ISO 7700-1:2008

KS ISO 7700-2:1999 Kenya Standard — Check of the calibration of moisture meters — Part 2: Moisture meters for oil seeds, to be replaced by KS ISO 7700-2:2011

KS ISO 6508-1:2005 Kenya Standard — Metallic materials —Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T), to be replaced by KS ISO 6508-1:2016

KS ISO 6508-2:2005 Kenya Standard — Metallic materials —Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T), to be replaced by KS ISO 6508-2:2015

KS ISO 6506-2:2005 Kenya Standard — Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines, to be replaced by KS ISO 6506-2:2017

KS ISO 376:2004 Kenya Standard — Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines, to be replaced by KS ISO 376:2011

KS ISO 8253-1:1989 Kenya Standard — Acoustics — Audiometric test methods — Part 1: Basic pure tone air and bone conduction threshold audiometry, to be replaced by KS ISO 8253-1:2010

KS ISO 8253-3:1996 Kenya Standard — Acoustics — Audiometric test methods — Part 3: Speech audiometry, to be replaced by KS ISO 8253-3:2012

KS ISO 532:1975 Kenya Standard — Acoustics — Method for calculating loudness level, to be replaced by KS ISO 532-1:2017

KS ISO 9296:1988 Kenya Standard — Acoustics — Declared noise emission values of computer and business equipment, to be replaced by KS ISO 9296:2017

KS 2542:2017 Kenya Standard — Off-grid solar photovoltaic lighting kits — Requirements; to be replaced by KS IEC/TS 62257-9-8: 2020

KS IEC 60904-9:2009 Kenya Standard — Photovoltaic devices —Part 9: Solar simulator performance requirements; to be replaced by KS IEC 60904-9:2020

KS 2505:2013

KS 1967:2015

KS 1969:2013 Kenya Standard — Petroleum industry — Installation of underground storage tanks, pumps/dispensers and pipe work at service

KS IEC 61400-21:2008 Kenya Standard — Wind turbine — Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines; to be replaced by KS IEC 61400-21-1:2019

KS IEC 61400-25-4:2008 Kenya Standard — Wind turbines — Part 25-4: Communications for monitoring and control of wind power plants — Mapping to communication profile; to be replaced by KS IEC 61400-25-4:2016

KS IEC/TR 61400-24:2002 Kenya Standard — Wind turbine generator systems — Part 24: Lightning

Kenya Standard — Mountable burner for use with Liquefied Petroleum Gas (LPG) —Specification, To be replaced by KS EAS 940:2020

Kenya Standard — The petroleum industry —The petroleum industry — Storage and distribution of petroleum products in above-ground bulk installations, To be replaced by KS EAS 976:2020

5th February, 2021 THE KENYA GAZETTE 469

protection; to be replaced by KS IEC 61400-25-4:2016

KS IEC 62108:2007 Kenya Standard — Concentrator photovoltaic (CPV) modules and assemblies — Design qualification and type approval; to be replaced by KS IEC 62108:2016

KS IEC/TS 62257-7:2008 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification — Part 7: Generators; to be replaced by KS IEC/TS 62257-7:2017

KS IEC/TS 62257-7-3:2008 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification — Part 7-3: Generator set — Selection of generator sets for rural electrification systems; to be replaced by KS IEC/TS 62257-7-3:2018

KS IEC/TS 62257-9-1:2008 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification — Part 9-1: Micropower systems; to be replaced by KS IEC/TS 62257-9-1:2016

KS IEC/TS 62257-9-6:2008 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification — Part 9-6: Integrated system — Selection of Photovoltaic Individual Electrification Systems (PV-IES); to be replaced by KS IEC/TS 62257-9-1:2016

KS ISO 9060:1990 Kenya Standard — Solar energy —Specification and classification of instruments for measuring hemispherical solar and direct solar radiation; to be replaced by KS ISO 9060:2019

KS 1709-1:2009 Kenya Standard — Batteries for use in photovoltaic power systems — Specification —Part 1: General requirements; to be replaced by KS IEC 61427-1:2013 and KS IEC 61427-2:2015

KS 1709-2:2009 Kenya Standard — Batteries for use in photovoltaic power systems — Specification —Part 2: Modified lead acid batteries; to be replaced by KS IEC 61427-1:2013 and KS IEC 61427-2:2015

KS ISO 5136:1990 Kenya Standard — Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method, to be replaced by KS ISO 5136:2003

KS ISO 7029:2000 Kenya Standard — Acoustics — Statistical distribution of hearing thresholds as a function of age, to be replaced by KS ISO 7029:2017

KS ISO 8253-1:1989 Kenya Standard — Acoustics — Audiometric test methods — Part 1: Basic pure tone air and bone conduction threshold audiometry, to be replaced by KS ISO 8253-1:2010

KS ISO 8253-3:1996 Kenya Standard — Acoustics — Audiometric test methods — Part 3: Speech audiometry, to be replaced by KS ISO 8253-3:2012

KS ISO 2251:1991 Kenya Standard — Lined antistatic rubber footwear — Specification, withdrawn by ISO without replacement

KS ISO 11640:2012 Kenya Standard — Leather — Tests for colour fastness — Colour fastness to cycles, To be replaced by KS ISO 11640:2018

KS ISO 17072-1:2011 Kenya Standard — Leather — Chemical determination of metal content — Part 1: Extractable metals, To be replaced by KS ISO 17072-1: 2019

KS ISO 17072-2:2011 Kenya Standard — Leather — Chemical determination of metal content — Part 2: Total

metal content, To be replaced by KS ISO 17072-2: 2019

KS ISO 3376:2011 Kenya Standard -- Leather — Physk:al and mechanical tests — Delete.: ration of tensile strength and percentage elongation. To be replaced by KS ISO 3376;2020

KS ISO 4048:2008 Kenya Standard — Leather — ale -- Determination of matter soluble in dichloromethane and free fatty acid content, To be replaced by KS ISO 4048:2018

KS ISO 4045:2008 Kenya Standard — Leather — Chemical tests — Determination of pH and difference figure, To be replaced by KS ISO 4045:2018

KS ISO 20876:2001 Kenya Standard — Footwear — Test methods for insoles - Resistance to stitch tear, To be replaced by KS ISO 20876:2018

ISO 5398-3:2007 Kenya Standard — Leather — Chemical determination of chromic oxide content Part 3: Quantification by atomic absorption spectrometry, To be replaced by KS ISO 5398-3:2018.

KS ISO 17075:2007 Kenya Standard — Leather — Chemical determination of chromium(VI) content in leather, To be replaced by KS ISO 17075-1:2017 and KS ISO 17075-2:2017

Kenya Standard — Leather — Determination of flex resistance — Part 1: Flexometer method, To be replaced by KS ISO 5402-1:2017

Kenya Standard — Leather - Identification of leather with microscopy, To be replaced by KS SO 17131:2020

Kenya Standard — Leather — Physical and mechanical tests — Measurement of stitch tear resistance, To be replaced by KS ISO 23910:2019

Kenya Standard — Bathroom slippers —Specification, To be replaced by KS 1620: 2021

Kenya Standard — Leather — Chemical tests — Preparation of chemical test samples, To be replaced by KS ISO 4044: 2017

Kenya Standard — Disposable adult diapers —Specification, To be replaced by KS EAS 968:2020

Kenya Standard — Disposable baby diapers —Specification, To be replaced by KS EAS 969:2020

Kenya Standard — Hair extensions —Specification, To be replaced by. KS EAS 966: 2020

Kenya Standard — Specification for groundnut peanut oil for cosmetic industry, To be replaced by KS EAS 64:2017

Kenya Standard — Essential oils —Determination of 1,8-cineole content

Kenya Standard — Essential oils — Estimation of primary and secondary free alcohols content by acetylation in pyridine

Kenya Standard — Essential oils (containing tertiary alcohols) — Evaluation of free alcohols content by determination of ester value after cold formylation

Kenya Standard — Cider and perry —Specification, To be replaced by KS 618: 2021

Kenya Standard — Spirit-based ready to drink alcoholic beverage — Specification, To be replaced by KS 2150:2021

KS ISO 5402-1:2011

KS SO 17131:2012

KS ISO 23910:2007

KS 1620: 2018

KS ISO 4044:2008

KS 2662:2016

KS 2108:2009

KS 2173:2000

KS 798:1989

KS ISO 1202:1999

KS ISO 3793:1999

KS ISO 4096:1999

KS 618:2007

KS 2150:2008

C. 70735 C. 69683 C. 123004 C. 59574 C. 14545 CPR/2011/46109 C. 70735 C. 7304 CPR/2009/1163 CPR/2014/1414I1 CPR/2013/103911 C. 112367 C. 92841 C. 104244 C. 113963 CPR/2013/100934 C. 38886 C. 34665 C. 59623 C. 76471 C. 70247 C. 113963 C. 83170

Ferguson Sharp Limited Grad East Africa Limited Gova Limited Halcyon Days Limited Hans Mehr (East Africa) Limited Jambo Booking Services Limited Kimberley Management Services Limited Kikenni Water Company Limited Mapping Africa Limited Micro Protect Limited MYC4 East Africa Limited Nova Hotels Limited 01 Kinyei Limited Operation 680 Housekeeping Limited Parita Arts and Crafts Limited Plascard (East Africa) Limited Riley Alarms Limited Riley Falcon (security) Limited Safar Bus Nineteen Four Limited Sixties Kenya Limited Silhoutte Limited Suswa Limited Yellow Bird Safaris Limited

470 THE KENYA GAZETTE 5th February, 2021

KS ISO 9917-1:2003 Kenya Standard — Dentistry — Water-based cements — Part 1: Powder/liquid acid-base cements, To be replaced by KS ISO 9917-1:2007

KS ISO 4007:2012 Kenya Standard — Personal protective equipment — Eye and face protection —Vocabulary, To be replaced by KS ISO 4007:2018

KS ISO 10993-1:2003 Kenya Standard — Biological evaluation of medical devices -- Part 1: Evaluation and testing within a risk management process. To be replaced by KS ISO 10993-1:2018

KS ISO 10993-3:2003 Kenya Standard — Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity, To be replaced by KS ISO 10993-3:2014

KS ISO 10993-4:2002 Kenya Standard — Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood, To be replaced by KS ISO 10993-4:2017

KS ISO 10993-9:1999 Kenya Standard — Biological evaluation of medical devices — Part 9: Framework for identification and quantification of potential degradation products, To be replaced by KS ISO 10993-9:2019

Dated the 22nd January, 2021. HIRAM GACHUGI,

for Registrar of Companies.

KS ISO 10993-11:1993Kenya Standard — Biological evaluation of medical devices — Part 11: Tests for systemic toxicity, To be replaced by KS ISO 10993:2017

KS ISO 11663:2014 Kenya Standard — Quality of dialysis fluid for haemodialysis and related therapies, To be replaced by KS ISO 23500-5:2019

KS ISO 13958:2014 Kenya Standard — Concentrates for haemodialysis and related therapies, To be replaced by KS ISO 23500-4:2019

KS ISO 13959:2014 Kenya Standard — Water for haemodialysis and related therapies, To be replaced by KS ISO 23500-3:2019

KS ISO/TS 22595-2:2014 Kenya Standard — Dentistry — Plant area equipment — Part 2: Compressor systems, To be replaced by KS ISO 22052:2020

KS ISO/IEC 17000:2004 Kenya Standard — Conformity assessment — Vocabulary and general principles, To be replaced by KS ISO/IEC 17000:2020

KS ISO 7171:1998 Kenya Standard — Furniture — Storage units — Test methods for the determination of stability, To be replaced by KS ISO 7171:2019

Dated the 20th January, 2021. BERNARD NJIRAINI,

PTG 1559/20-21 Secretary, National Standards Council.

GAZE I I h NOTICE NO. 1062

THE COMPANIES ACT

(No. 17 of 2015)

INTENDED DISSOLUTION

PURSUANT to section 894 (3) of the Companies Act, that unless it is shown that the companies listed below are carrying on business or in operation, the Registrar shall have the companies struck off the register and the companies will be dissolved.

Number Name of Company

C.73663

Bhanji Investments Limited C. 93849

Cabetti Clothing Limited C. 104527

Conservation Capital Limited C. 96733

Excellent and Taste Limited C. 56737

Express Clothing Wholesalers Limited C. 104112

Four Seventy Investment Limited

GAZETTE NOTICE No. 1063

THE COMPANIES ACT

(No. 17 of2015)

INTENDED DISSOLUTION

PURSUANT to section 897 (3) of the Companies Act, it is notified that at the expiration of three (3) months from the date of this gazette, the names of the under-mentioned companies shall unless cause is shown to the contrary be struck off the register of companies and the companies shall be dissolved.

Number

Name of Company

CPR/2014/155346

Agrimore East Africa Limited CPR/2011/57325

Angelic Creations Supplies and Services Limited

PVT/2016/032225

Appfine Limited CPR/2010/22101

Bandari Hotel Limited C. 85897

Carlton Developments Limited C. 78534

Damico Suppliers Limited CPR/2009/5870

Economic Communication Limited PVT-DLUZ282

Fumbh Design Limited CPR/2012/66344

Gras Savoye East Africa Risk Solutions Limited

CPR/2011/53772

Harper Holdings Limited CPR/2013/106550

Hilac Trading Company Limited PVT-Rxuga29

Insuhub Limited C.102198

Jogian Interlink Limited PVT-XYUQJE2

Kangema Pambazuko Enterprises and Investments Limited

C. 112339

Kassmatt Limited PVT-8LUB8DL

Kea Boys and Girls Academy Limited PVT-ZQUQPMB

Keheala Limited PVT-XYUJKGZ

Lg Brothers Trading Company Limited PVT/2016/021984

Malu Digital Enterprises Limited CPR/2016/220081

Mangroove Entertainment Limited PVT/2016/023224

Mom In Balance Kenya Limited CPR/2015/193033

Mombasa Lasik Centre Limited CPR/2013/99803

Mother Care Enterprises Limited PV'F-KAU3XA6

Mukulima Timam Limited CPR/2014/137617

Nescas Investments Limited PVT-MKUBG5L

Ndabi Limited CPR/2013/108357

Noben Enterprises Limited CPR/2010/22216

Ocean Sand Hotel Limited CPR/2013/124365

Pacmoore Foods Kenya Limited PVT-8LU7BRQ

Seniko Corporation Limited CPR/2012/86389

S K Umbrella Limited C. 62715

Sourthern Shield Properties Limited PVT-8LU5E22

Solis Pharmaceuticals Limited PVT/2016/031877

Sun Plus Limited

480 THE KENYA GAZETTE 5th February, 2021

NOW ON SALE

REPORT OF THE INDEPENDENT REVIEW ON THE GENERAL

ELECTIONS HELD IN KENYA ON 27TH DECEMBER, 2007

KRIEGLER REPORT

Price: KSh. 1740

SESSIONAL PAPER NO. 3 OF 2009 ON NATIONAL LAND POLICY

Price: KSh. 350

CLINICAL GUIDELINES

Price: KSh. 930

CODE OF REGULATION FOR TEACHERS

Price: KSh. 790

SESSIONAL PAPER NO. 10 OF 1965 AFRICAN SOCIALISM AND ITS

APPLICATION TO PLANNING IN KENYA

Price: KSh. 200

COMMISSION OF ENQUIRY INTO POST ELECTION VIOLENCE (CIPEV)

WAKI REPORT

Price: KSh. 1800

SESSIONAL PAPER NO. 6 OF 2011 ON NATIONAL CHILDRENS POLICY

Price: KSh. 350

IMPORTANT NOTICE TO SUBSCRIBERS TO THE KENYA GAZETTE

THE following notes are for the guidance of persons submitting "copy" for inclusion in the Kenya Gazette, Supplement, etc.:

(1) The Kenya Gazette contains Notices of a general nature which do not affect legislation. They are, therefore, submitted to the Government Printer directly.

(2) Legislative Supplement contains Rules and Regulations which are issued by the National or County Governments. Because of this, they must be submitted to the Government Printer through the office of the Attorney—General.

(3) Bill Supplement contains Bills which are for introduction in the National Assembly, Senate or County Assemblies.

(4) Act Supplement contains Acts passed by the National Assembly, Senate or County Assemblies.

All "copy" submitted for publication should be prepared on one side of an A4 sheet no matter how small the Notice is, each page being numbered and should be typed with double spacing. Copy should be clear, legible and contain no alterations.

Particular attention should be paid to the following points:

(i) Signature must be supported by rubber—stamping or typing the name of the signatory in capital letters.

(ii) Must be correct and filled in where necessary.

(iii) Care should be taken to ensure that all headings to Notices and references to legislation are up to date and conform with the Revised Edition of the Laws of Kenya.

EXTRACT FROM THE HUMAN RESOURCE POLICIES AND PROCEDURES MANUAL FOR THE PUBLIC SERVICE —

Kenya Gazette

A.30 (1) All communication for publication in the Kenya Gazette should reach the Government Printer not later than Friday of the week before publication is desired.

(2) A State Department will be required to meet the cost of advertising in the Kenya Gazette.

It is emphasized that these notes are for guidance only, but it is requested that persons submitting copy for publication first satisfy themselves that such copy is complete in every respect.

SUBSCRIPTION AND ADVERTISEMENT CHARGES

With effect from 1st July, 2012, subscription and advertisement fee for the Kenya Gazette are as follows:

SUBSCRIPTION CHARGES:

KSh. cts. Annual Subscription (excluding postage in Kenya) 13,920 00 Annual Subscription (including postage in Kenya) 16,935 00 Annual Subscription (overseas) 32,015 00 Half—year Subscription (excluding postage in Kenya) 6,960 00 Half—year Subscription (including postage in Kenya) 8,470 00 Half—year Subscription (overseas) 16,010 00 Single copy without supplements 60 00

GAZET1ED SUPPLEMENT CHARGES—PER COPY:

Postage in EA.

KSh. cts KSh. as.

Up to 2 pages 15 00 60 00 Up to 4 pages 25 00 60 00 Up to 8 pages 40 00 60 00 Up to 12 pages 60 00 60 00 Up to 16 pages 80 00 60 00 Up to 20 pages 95 00 155 00 Up to 24 pages 110 00 115 00 Up to 32 pages 145 00 I I5 00

LAND ACT 2012

Price: KSh. 580

FINANCE ACT 2020

Price: KSh. 110

For further information contact: The Government Printer, P.O. Box 30128-00100, Nairobi, Tel. 3317886, 33177887,3317840.

e—mail: printer@ interior.go.ke

Up to 36 pages 165 00 Up to 40 pages 180 00 Each additional 4 pages or part thereof

20 00

ADVERTISEMENT CHARGES:

Full page Full single column Three—quarter column Half column Quarter column or less

}depending on weight

KSh. cts.

27,840 00 13,920 00 10,4,40 00 6,960 00 3,480 00

Subscribers and advertisers are advised to remit payments by bankers cheques, or deposit using our account at National Bank of Kenya, A/C No. 01001000903100, drawn in favour of "Government Printers".

Revenue stamps cannot be accepted. Subscriptions and advertisement charges are paid in advance.

MWENDA NJOKA, M.B.S. Government Printer.

PRINTED AND PUBLISHED BY THE GOVERNMENT PRINTER, NAIROBI