the industry standard since 1984 - sem products...step 1 prep aluminum, steel & stainless steel...
TRANSCRIPT
Manufactured in the USA semproducts.com
• Easily restore faded or peeling trim parts• Smooth, consistent finish on most plastics & metals• Maximum adhesion and flexibility• No primer needed
EURO JET BLACK LOW VOC 2.8ORIGINAL TRIM BLACK
THE INDUSTRY STANDARD SINCE 1984
COWL PANELS, WIPER ARMS GRILLS
MIRROR HOUSINGS WINDOW TRIM
NGTB0616
STEP 1 PREPALUMINUM, STEEL & STAINLESS STEEL
Clean surface with SEM Solve or Zero VOC Surface Cleaner. Sand surface with 400 grit sand paper. Blow or wipe off dust and re-clean with SEM Solve or Zero VOC Surface Cleaner.
PLASTIC
Clean surface with SEM Soap and a gray scuff pad. Rinse with water and dry. Clean with Plastic & Leather Prep. If contamination still exists, water will bead on the surface. Repeat this step until beading no longer occurs. To promote adhesion on ABS, PVC and other similar plastics, apply a medium wet coat of Sand Free. Apply color while Sand Free is still wet. As the Sand Free evaporates, the color is drawn into the surface, creating excellent adhesion. To promote adhesion on TPO, EPDM, PP and other similar thermoplastics, use Plastic Adhesion Promoter or XXX Adhesion Promoter per instructions.
Learn about Trim Black Paints semproducts.com/refinish-trim-paints
INSTRUCTIONS
PRODUCT SERIES Part Product Name Color Container
39033 Trim Black Charcoal Metallic Charcoal Metallic 16 oz. Aerosol
39063 Trim Black Gloss Gloss Black 16 oz. Aerosol
39068 Trim Black Gloss Gloss Black Pint
39141 Trim Black Black Gallon
39143 Trim Black Black 20 oz. Aerosol
39144 Trim Black Black Quart
Part Product Name Color Container
39141-LV Trim Black Low VOC Black Gallon
39144-LV Trim Black Low VOC Black Quart
41013 Trim Black Euro Jet Matte Matte Black 16 oz. Aerosol
41023 Trim Black Euro Jet Satin Satin Black 16 oz. Aerosol
41024 Trim Black Euro Jet Satin Satin Black Quart
41033 Trim Black Euro Jet Gloss Gloss Black 16 oz. Aerosol
STEP 2 APPLICATIONAEROSOL
Agitate thoroughly! Shake can vigorously for one minute after mixing ball rattles to ensure color uniformity and to prevent clogging. For best results, use when can temperature is approximately 70°F (21°C).
Coats: 2 – 3 medium wet
Flash Time: 3 – 5 minutes
BULK
Mix thoroughly. Reduce 1:1 with a high quality urethane reducer. A low VOC reducer must be used to maintain 2.8 VOC level of Trim Black Low VOC.
Trim Black Euro Jet Satin is ready to spray. Do not reduce.
Air Pressure: 20 – 25 psi with non-HVLP equipment 8 – 10 psi at the cap with HVLP
Fluid Tip Size: 1.2 – 1.4
Coats: 2 – 3 medium wet
Flash Time: 5 – 10 minutes
For full details, refer to the Technical Data Sheet.
SEM Products, Inc.Rock Hill, SC 29730 1-800-831-1122semproducts.com
Part Product Container 3837( ) SEM Solve Multiple Sizes
4040( ) Zero VOC Surface Cleaner Multiple Sizes
39362 SEM Soap 16 oz. Tube
3836( ) Sand Free Multiple Sizes
3986( ) Plastic Adhesion Promoter Multiple Sizes
7772( ) XXX Adhesion Promoter Multiple Sizes